| Age | Commit message (Collapse) | Author |
|---|
|
Sync the HPMicro BSPs with hpm_sdk v1.13.0 and add the HPM5100EVK
(HPM5151) board.
- add the hpm5100evk BSP (board/startup/applications/Kconfig/docs) and
register it in .github/ALL_BSP_COMPILE.json, bsp/README.md and the
HPMicro READMEs
- re-sync the 11 existing boards (board/startup/debug scripts/linker
scripts/applications) with hpm_sdk v1.13.0, keeping the RT-Thread
specific parts: clock_time based drv_timer, CXX wired into the scons
environment, SConscript outputs under build/, named Kconfig choices,
rt_hw_us_delay in board_delay_*, board local codec files
- sync the shared driver layer with hpm_sdk v1.13.0 (GPTMRv2/PTMR,
PUART, soft I2C/SPI and the remaining peripheral driver updates)
- select the hpm_sdk v1.13.0 online package (PKG_USING_HPM_SDK_V113)
- use -Og instead of -O0 for the debug builds and print floats with the
RT-Thread klibc implementation instead of newlib nano
- initialize the RT-Thread heap before the SDK console init: the SDK
console_init() calls setvbuf(), which allocates through the C library
malloc() and tripped RT_ASSERT() in rt_smem_alloc() on the boards
built with RT_USING_DEBUG
- keep only ram_rtt.ld/flash_rtt.ld per board, align the DLM origin to
4KB on hpm5300evk/hpm5301evklite (the unaligned origin made the
linker emit a file backed PT_LOAD for the RAM area, which broke
"program rtthread.elf"), and anchor the generated .bin at the flash
base address 0x80000000
- sync the hpm6750evk openocd debug scripts with the new style used by
the other boards (hpm_common.cfg/hpm_reset.cfg with arp_halt)
- keep the upstream synced board/startup/libraries trees of bsp/hpmicro out of the
changed-file cppcheck run (same policy as bsp/hpmicro/.clang-format-ignore): the
check runs without the hpm_sdk include paths, so it reports ATTR_PLACE_AT and the
linker script symbol arithmetic in c_startup() as errors
- give the hpmicro boards in the changed-file scons trigger list the RV32 toolchain
they need (RISC-V-GCC-RV32) and add the matching installation step to that
workflow: the entries used sourcery-arm, which only provides the ARM toolchain,
so those legs could not find riscv32-unknown-elf-gcc
- keep hpm5100evk's ram_rtt.ld identical to the hpm_sdk v1.13.0
reference: the .fast_ram sections belong in DLM there (the DLM has
enough headroom), and that also makes its RAM and flash layouts agree
- skip the dependency pre-check when cleaning (scons -c): it runs from
DoBuilding() unconditionally, so a clean request with packages/ not
fetched yet was aborted with exit code 1 instead of cleaning
- make the manual scons trigger workflow runnable: it aborted while still
downloading actions because actions/upload-artifact@v3 is deprecated,
and scons was not on PATH because ~/.env/env.sh was never sourced.
Install tools/requirements.txt and source the Env PATH script in the
build step, and use @main action versions, as bsp_buildings.yml does
- start the LED demo thread only when rt_thread_create() succeeded
Tested:
- 12 boards x {ram_debug, ram_release, flash_debug, flash_release}:
48/48 clean builds
- flash boot + msh on hpm5100evk, hpm5300evk, hpm5e00evk, hpm6200evk,
hpm6300evk, hpm6750evk, hpm6750evk2, hpm6750evkmini, hpm6800evk,
hpm6e00evk, hpm6p00evk (list device/timer, ps, free, reset, rt_kprintf
float formatting)
- re-ran .github/workflows/manual_trigger_scons_except_STM32_all.yml with
the matrix reduced to the three hpmicro rows: all three legs build and
scons --dist succeeds with no local workarounds
|
|
|
|
|
|
|
|
|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
- upgraded bsp to v1.10.0
- moved hpm_sdk to rt-thread package
- added support for hpm6p00evk and hpm5e00evk
Signed-off-by: Fan YANG <[email protected]>
|
|
|
|
|
|
- upgraded hpm_sdk to v1.6.0
Signed-off-by: Fan YANG <[email protected]>
|
|
|
|
- removed invalid reference in board KConfig
Signed-off-by: Fan YANG <[email protected]>
|
|
hpm_sdk
- added new boards: hpm5300evk, hpm5301evklite and hpm6800evk
- upgaded hpm_sdk
- driver updates and bugfixes
- add hpmicro BSPs to CI
Signed-off-by: Fan YANG <[email protected]>
|
|
- Updated hpm_sdk in libraries
- Updated rt-thread driver adapter
- Updated bsp for hpm6750evkmini
- Updated bsp for hpm6750evk
- Added bsp for hpm6750evk2
- Added bsp for hpm6300evk
- Added bsp for hpm6200evk
Signed-off-by: Fan YANG <[email protected]>
|
|
* Update Kconfig
* Update trap_gcc.S
* Update bsp/hifive1/drivers/SConscript
Co-authored-by: Man, Jianting (Meco) <[email protected]>
* Update SConscript
* [atomic]提交一份arm与risc-v架构下的常用原子操作函数
* 修改变量类型
* 更新rtatomic.h与atomic_port.c
* 更新rt-thread\libcpu\arm\common\atomic_port.c
* 更新include/rtatomic.h与libcpu/arm/common/SConscript
* 更新include/rtatomic.h
* 修正格式与Kconfig
* 修正格式与文件结构
* 规范文件格式与文件重命名
* 添加测试用例与CI
* 添加函数声明
* 修改virt64/SConscript 添加atomic_riscv.c
* 1.规范代码风格
* 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误
* 添加C11标准库原子操作测试
---------
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
|
|
提供一份公共代码于common (#6941)
整合libcpu/riscv中的移植文件 提供一份公共代码于common
在提交本pr时，除hpmicro的内核，rv32内核bsp已完成去除大部分的冗余，大部分代码采用common中的实现。本pr的作用是进一步统一common中的文件，从而提供一份公用代码，新移植的RV32内核的BSP可以全部使用common代码。
- 在common中提供一份公用文件：interrupt_gcc.S
- 修改原有的文件，将原有的中断中上下文切换代码替换为interrupt_gcc.S
- 基于上述修改，修改仓库中risc-v内核的BSP与移植相关的部分 (主要包含中断入口函数 中断栈等)
- 在common中提供一份公用文件：trap_common.c；提供统一中断入口函数，中断入口函数初始化，中断入口注册等函数，并完善异常时的信息输出
- 在common中提供一份公用文件：rt_hw_stack_frame.h；将栈帧结构体剥离，供用户使用
- 在上述工作完成后，在上述工作的基础上测试仓库中risc-v内核的BSP
- 完善函数中的命名，完善中断栈的获取
- 提供一份详细的基于现有common文件的移植指南
#### 在什么测试环境下测试通过
- 1.CH32V307V-R1-R0
- 2.CH32V208W-R0-1V4
- 3.HPM6750EVKMINI
- 4.GD32VF103V-EVAL
- 5.qemu(CORE-V-MCU )
> 与上述开发板使用同样芯片的BSP均测试通过
在CH32V307V-R1-R0与HPM6750EVKMINI上基于现有移植文件进行多线程复杂场景下的长时间测试，测试过程系统运行正常。
|
|
rt_ssize_t can give negative error code, which follows the unix style correctly
|
|
|
|
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <[email protected]>
* update
* bsp: support boards from hpmicro
- Supported HPM6750EVKMINI
- Supported HPM6750EVK
Signed-off-by: Fan YANG <[email protected]>
Signed-off-by: Fan YANG <[email protected]>
Co-authored-by: Meco Man <[email protected]>
|
