| Age | Commit message (Collapse) | Author |
|---|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have a gnne driver.
Solution: Provide gnne driver for the k230 platform in the RT-Thread repository.
- Implements mutex lock mechanism for AI2D and GNNE modules.
- Adds HARDLOCK_AI2D support in hardlock driver for mutual exclusion.
- Implements poll operation for device status monitoring.
- Updates documentation in bsp/README.md.
Signed-off-by: ChuanN-sudo <[email protected]>
|
|
1. add dma support to the I2C driver to improve efficiency.
Signed-off-by: Ze-Hou <[email protected]>
|
|
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an spi driver.
Solution: Provide spi driver for the k230 platform in the RT-Thread repository.
- Supports SPI0(OSPI) controller with 1/2/4/8 data lines.
- Supports SPI1(QSPI0) and SPI2(QSPI1) controllers with 1/2/4 data lines.
- Implements DMA-based transfers for OSPI, QSPI, and DSPI modes.
- Falls back to standard IRQ-driven transfers for legacy SPI mode (single line).
- Updates documentation in bsp/README.md
Signed-off-by: ChuanN-sudo <[email protected]>
|
|
Requirement: The BSP for the k230 platform in the RT-Thread repository
does not yet have an I2C driver.
Solution: Provide I2C driver for the k230 platform in the RT-Thread
repository.
1. support i2c master mode
Signed-off-by: Ze-Hou <[email protected]>
|
|
Requirement: The BSP for the k230 platform in the RT-Thread repository
does not yet have an RTC driver.
Solution: Provide RTC drivers for the k230 platform in the RT-Thread
repository, implementing timekeeping and alarm functionalities,
with interrupt support for the alarm feature.
Signed-off-by: Ze-Hou <[email protected]>
|
|
Added pdma support for uart driver and a test file test_uart.c.
The test uses pdma to improve uart send speed,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
Added a temperature sensor driver and a test file test_ts.c.
The test uses temperature sensor to measure the chip temperature,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
Originally, the interrupt definitions of various peripherals
were distributed in various peripheral drivers, resulting
in duplicate definitions. Now they are defined in one place.
Signed-off-by: Chen Wang <[email protected]>
|
|
This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC,
providing essential DMA capabilities for peripheral data transfers.
Key features implemented:
1. PDMA channel request/release management
2. Channel start/stop control
3. Interrupt callback registration
4. Data transfer between device ports and DDR memory
The driver includes:
- Core driver implementation (drv_pdma.c/h)
- Build system support (SConscript)
- Basic test cases (test_pdma.c)
Tested with:
- PDMA channel request/release
- DDR to UART TX FIFO transfers
- UART RX FIFO to DDR transfers
Signed-off-by: eatvector <[email protected]>
|
|
Added a PWM driver and a test file test_pwm.c.
The test uses PWM to control the LED brightness,
to check if the driver works correctly.
Signed-off-by: XU HU <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
K230 supports 3 GPIO groups:
group0: GPIO0 ~ GPIO31, support i/o and irq
group1: GPIO32 ~ GPIO63, support i/o and irq
group2: GPIO64 ~ GPIO71, only support i/o.
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
K230 support 6 general hardware timers and 3 stc timers.
This patch only implement drivers for general hw timers.
Signed-off-by: Chen Wang <[email protected]>
|
|
K230 has two watchdog timers.
Add unit tests based on utest framework.
Watchdog and test are both configuable, disabled by default.
Signed-off-by: Chen Wang <[email protected]>
|
|
Support sdio work for 01Studio board.
01Studio connect TF socket with sdio0, which is
different from standard canmv v1.0/v1.1 board
(which uses sdio1).
Updated configuration menu,
- SDIO devices are now a choice of two.
- Root file system types are also a choice of multiple.
Currently only cromfs and elmFAT are supported.
- Modified the default mount partition of the root file
system to sd0p1
Deleted the configuration BSP_SD_SDIO_DEV, and now
directly set mmcsd_change according to the selection of
the SDIO device.
Eliminated the warning of the drv_sdhci.c and
egularized the code format. The logic of this file
has not been essentially modified.
Sync and update the .config/rtconfig.h to the latest.
Signed-off-by: Chen Wang <[email protected]>
|
|
SystemCtrl includes:
- boot
- clock
- power
- reset
These drivers are built-in by default.
Signed-off-by: Wang Chen <[email protected]>
|
|
This hardlock is required by some other drivers, such
as sysctl power.
This driver can be enable/disabled by configuration.
Signed-off-by: Wang Chen <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Wang Chen <[email protected]>
|
|
|
