| Age | Commit message (Collapse) | Author |
|---|
|
* [libcpu][risc-v] Refactor the RISC-V architecture port
Introduce an opt-in unified RISC-V common layer for RV32 and RV64 while keeping existing BSPs on the legacy implementation during migration.
- use ARCH_RISCV and ARCH_CPU_64BIT for architecture and XLEN selection
- unify context, trap, MMU, cache, timer, SBI, SMP and ISA handling
- add PLIC, CLIC, ACLINT, APLIC and IMSIC support
- map physical hart IDs to contiguous logical CPU IDs
- add T-Head vendor overrides while preserving legacy ports
- migrate qemu-virt64-riscv with RV32 and RV64 support
- update clock_time, MM, LWP, OFW, PCI and Rust integration
Existing BSPs continue using legacy_common or common64 unless they select RT_USING_RISCV_NEW_COMMON.
Signed-off-by: GuEe-GUI <[email protected]>
* [libcpu][risc-v] skip disabled CPU nodes in early FDT walk
Rbb666 noted that rt_hw_fdt_install_early() walked every /cpus child
without checking status, so disabled cores still joined hart registration
and MMU capability probing. Skip nodes that are not okay/ok via
rt_fdt_device_is_available() before reading reg or mmu-type.
Signed-off-by: seteiro <[email protected]>
* [libcpu][risc-v] Fix per-CPU page table mapping
- reuse existing non-leaf page table entries when mapping per-CPU areas
- reject leaf entry conflicts instead of overwriting mappings
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
Signed-off-by: seteiro <[email protected]>
Co-authored-by: seteiro <[email protected]>
|
|
|
|
|
|
1. version for v1.2
2. support packed queue
1. support MMIO/PCI over bus
2. new virtio queue api with dma/cpu sync
3. update for virtio device drivers:
- net
- block
- console
- input
- gpu
4. new virtio device drivers:
- 9p
- crypto
- rng
- scmi
- scsi
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
1.Add the necessary function declarations for SMP enablement and implement the corresponding
functionalities, including rt_hw_secondary_cpu_up, secondary_cpu_entry, rt_hw_local_irq_disable,
rt_hw_local_irq_enable, rt_hw_secondary_cpu_idle_exec, rt_hw_spin_lock_init, rt_hw_spin_lock,
rt_hw_spin_unlock, rt_hw_ipi_send, rt_hw_interrupt_set_priority, rt_hw_interrupt_get_priority,
rt_hw_ipi_init, rt_hw_ipi_handler_install, and rt_hw_ipi_handler.
2.In the two functions (rt_hw_context_switch_to and rt_hw_context_switch) in context_gcc.S,
add a call to rt_cpus_lock_status_restore to update the scheduler information.
3.If the MMU is enabled, use the .percpu section and record different hartids by configuring
special page tables; if the MMU is not enabled, record them directly in the satp register.
Additionally, add dynamic startup based on core configuration.The .percpu section is only used
when both ARCH_MM_MMU and RT_USING_SMP are enabled. However, there is a certain amount of space
waste since no macro guard is added for it in the link script currently.
4.The physical memory of QEMU started in CI is 128MB, so RT_HW_PAGE_END is modified from the
original +256MB to +128MB. Modify the SConscript file under the common64 directory to include
common/atomic_riscv.c in the compilation process.
Signed-off-by: Mengchen Teng <[email protected]>
|
|
|
|
utest framework is an optional module and should be
enabled when running utest.
So RT_USING_UTEST should not be enabled by default.
Disable it now.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
RISCV_S_MODE configuration only affects the code in
libcpu/risc-v/virt64, and the only bsp using this
libcpu is qemu-virt64-riscv.
Considering s-mode is the default mode RT-Thread
running on virt64 machine, it seems unnecessary to
make RISCV_S_MODE a Kconfig option.
Solution: Remove RISCV_S_MODE from Kconfig and define
it as a macro in the code in libcpu/risc-v/virt64.
Plus, due to this macro is only related to virt64, rename
RISCV_S_MODE to RISCV_VIRT64_S_MODE.
Update the .config/rtconfig.h in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
There is problem in the Kconfig of qemu-virt64-riscv.
RT_USING_VIRTIO is already defined in components/drivers/virtio/Kconfig,
so it should not be defined again in the BSP kconfig.
The solution is to rename RT_USING_VIRTIO to BSP_USING_VIRTIO.
Also, refer to the configuration method for virtio device drivers in
bsp/qemu-virt64-aarch64/drivers/Kconfig to rewrite the configuration
of BSP_USING_VIRTIO_xxx.
Updated default .config/rtconfig.h at the same time.
Signed-off-by: Chen Wang <[email protected]>
|
|
Now lwext4 is ready, and qemu-virt64-riscv smart can boot with rootfs.
Updated README to introduce this.
This patch also replace qemu-nographic.sh with run.sh, which has a more
simple name and more robust to launch rootfs image binary.
TBD: qemu-nographic.bat is not touched, hope some guys from Windows can
give a hand.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
Kconfig
|
|
Improved README document
- Unified the usage process of Standard Edition and Smart Edition.
- Deleted the description of running RTT in Machine Mode. Currently,
both Standard Edition and Smart Edition RTT run in S-mode by default.
At the same time, some unnecessary scripts were cleaned up.
Signed-off-by: Chen Wang <[email protected]>
|
|
Changes:
- added config for NEW_CTX_SWITCH
- used new context on c906 sched switch routine
- update _rt_hw_stack_init to fit into NEW_CTX_SWITCH
- separated vector ctx from the generic
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
- using generic command instead of abs path
- update BSP configurations
- update README
|
|
|
|
|
|
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <[email protected]>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <[email protected]>
|
|
|
|
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <[email protected]>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
|
|
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
|
|
We support OFW API to replace fdt old API, and add
IRQ, IO, Platform-Bus, CPUs ... OFW node contorl.
To support work with Device Tree or ACPI in drivers
that use IRQ, we make a programmable interrupt
controller driver's model.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* sync and update
|
|
* Update Kconfig
* Update trap_gcc.S
* Update bsp/hifive1/drivers/SConscript
Co-authored-by: Man, Jianting (Meco) <[email protected]>
* Update SConscript
* [atomic]提交一份arm与risc-v架构下的常用原子操作函数
* 修改变量类型
* 更新rtatomic.h与atomic_port.c
* 更新rt-thread\libcpu\arm\common\atomic_port.c
* 更新include/rtatomic.h与libcpu/arm/common/SConscript
* 更新include/rtatomic.h
* 修正格式与Kconfig
* 修正格式与文件结构
* 规范文件格式与文件重命名
* 添加测试用例与CI
* 添加函数声明
* 修改virt64/SConscript 添加atomic_riscv.c
* 1.规范代码风格
* 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误
* 添加C11标准库原子操作测试
---------
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
* [rt-smart/mem] remove pv_offset
* [rt-smart] list kernel space command
* [rt-smart] restore ioremap region
* [revert] restore kernel space isolation
* [rt-smart/pv_off] code format
* [rt-smart] add get_pvoff()
* [pvoffset] pvoff as constant for C codes
* [pvoff] pvoff as interfaces
|
|
|
|
* Add ADT Kconfig and fix MMU kconfig issue in Cortex-A
* [BSP] enable ADT
|
|
* [rv64/bsp] porting to mm
* [mm] report more info for debugging
* [fix] code format
* [libcpu/c906] porting to RTOS
* [fix] using rtdbg api
* [fix] add return
* [fix] report more information for debugging
* [fix] use assert 0 for unrecoverable error
|
|
|
|
|
|
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
|
|
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
|
|
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
|
|
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
|
|
|
|
|
|
