| Age | Commit message (Collapse) | Author |
|
|
|
|
|
* bsp beaglebone: add IAR template files and fix it's build error
ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
(我只是从STM32里面抄来,然后根据自己的理解改了一下,并没有验证这些参数的正确性,
我也不知道怎么用命令行调用这些参数来编译)
* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt
am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:
=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>] lr : [<8ff62497>]
reloc pc : [<728a956c>] lr : [<80802497>]
sp : 8df37358 ip : 00000000 fp : 00000002
r10: 8df4d448 r9 : 8df3feb8 r8 : 8ffd30f8
r7 : 8ff78089 r6 : 00000002 r5 : 80200000 r4 : 8df4d44c
r3 : 80200000 r2 : 8df4d44c r1 : 8df4d44c r0 : 00000001
Flags: nzCv IRQs off FIQs on Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...
resetting ...
* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support
IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160
* bsp beaglebone: change IAR template.ewp code use Arm mode
Arm mode bin size will bigger than Thumb mode
* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable
Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
|
|
* bsp beaglebone: rerun menuconfg
* bsp beaglebone: add uart0 support
* bsp beaglebone: use uart0 as console
* bsp beaglebone: add heap init
fix rt_application_init() error:
(m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288
* bsp beaglebone: add mmu & interrupt init
must init mmu, otherwise no interrupt is generated, cause scheduler can't work.
I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c
* libcpu am335x: reset interrupt controller before init vector
I think reset before init is more better
AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c
IntAINTCInit()
* bsp beaglebone: full gpio driver support
* bsp beaglebone: add tftpboot way to uboot_cmd.txt
* bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one
Co-authored-by: YangZhongQing <[email protected]>
|
|
|
|
clean_invalid must be set at the same time, and call
clean_invalid, or call clean/invalid
|
|
|
|
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <[email protected]>
|
|
|
|
* [cpu][cm33] Support running in secure mode
* [bsp][lpc55sxx] Using the cortex cm33
|
|
* [rtc] use gmtime_r to replace gmtime
|
|
|
|
IAR统一使用iccarm作为判断条件而不是是用IDE的名字来进行判断
因为不确定后续IAR是否会像Keil一样内含有不同的编译工具链
此外,将判断条件改为列表方式,这样更方便后续增加其他可能的IAR编译链
|
|
将GCC判断条件改为列表方式,方便后续增加新的编译工具链
|
|
|
|
|
|
used in GCC4.7 and later versions.
|
|
|
|
|
|
* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
|
|
|
|
rt_hw_context_switch_to (#5748)
|
|
gcc编译会出现__rt_ffs() 函数重定义,导致编译不通过的问题; (#5755)
2、解决bsp/rm48x50工程使用arm-gcc编译下载后,程序运行出现prefetch abort异常的问题。
|
|
* 1. 新增了i2c/spi/rtc/crypto等驱动;2. 删除了部分文件中的未使用到的头文件包含; 3. 修改keil编译时pm文件atoi的头文件stdlib未包含的警告
* 修改文件格式
* BSP
1. 修改f4系列bsp的readme文件与工程文件
2. 修改f0系列源文件的版权信息、删除目前没有的库文件。
3. 其他
* 修改IAR环境下arm cortex-m33内核的syscall_iar.S文件编译错误
* 还原.gitignore文件
Co-authored-by: aisino2200 <[email protected]>
|
|
|
|
[bugfix] libcpu/arm/cortex-m/context_gcc: 修复thumb指令集汇编语法错误
|
|
|
|
This reverts commit a5f6fdc780d55f2bf2a1624815879e15c51082b5.
|
|
|
|
当使用thumb指令集时,要求汇编语法中的“条件执行”要跟在IT指令后面,否则会编译不通过。
报错如下:Error: thumb conditional instruction should be in IT block -- `moveq r4,#0x01'
虽然可以通过指定"-Wa,-mimplicit-it=thumb"选项来告诉编译器识别隐式的IT指令,但是能在代码里面直接加上IT指令的话更好。
thumb指令集“条件执行”arm官网文档:
https://developer.arm.com/documentation/dui0473/m/condition-codes/conditional-execution-in-thumb-state
参考论坛帖子:
https://club.rt-thread.org/ask/question/433887.html
https://club.rt-thread.org/ask/question/4188.html
Signed-off-by: Mingrui Ren <[email protected]>
|
|
|
|
[update] support armclang
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
在cortex-a中增加,打开RT_USING_CPU_FFS宏定义时的_rt_ffs实现。
|
|
add ethernet driver for zynqmp-r5-axu4ev
|
|
|
|
|
|
添加gicv3中断控制器代码,更新menuconfig配置选项与utest的config.h
|