path: root/bsp/nuvoton/libraries/m031/StdDriver/src/nu_timer.c

/**************************************************************************//**
 * @file     timer.c
 * @version  V3.00
 * $Revision: 5 $
 * $Date: 18/07/13 5:00p $
 * @brief    M031 Series Timer Controller (TIMER) Driver Source File
 *
 * @note
 * SPDX-License-Identifier: Apache-2.0
 * Copyright (C) 2018 Nuvoton Technology Corp. All rights reserved.
 *****************************************************************************/
#include "M031Series.h"

/** @addtogroup Standard_Driver Standard Driver
  @{
*/

/** @addtogroup TIMER_Driver TIMER Driver
  @{
*/

/** @addtogroup TIMER_EXPORTED_FUNCTIONS TIMER Exported Functions
  @{
*/

/**
  * @brief      Open Timer with Operate Mode and Frequency
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  * @param[in]  u32Mode     Operation mode. Possible options are
  *                         - \ref TIMER_ONESHOT_MODE
  *                         - \ref TIMER_PERIODIC_MODE
  *                         - \ref TIMER_TOGGLE_MODE
  *                         - \ref TIMER_CONTINUOUS_MODE
  * @param[in]  u32Freq     Target working frequency
  *
  * @return     Real timer working frequency
  *
  * @details    This API is used to configure timer to operate in specified mode and frequency.
  *             If timer cannot work in target frequency, a closest frequency will be chose and returned.
  * @note       After calling this API, Timer is \b NOT running yet. But could start timer running be calling
  *             \ref TIMER_Start macro or program registers directly.
  */
uint32_t TIMER_Open(TIMER_T *timer, uint32_t u32Mode, uint32_t u32Freq)
{
    uint32_t u32Clk = TIMER_GetModuleClock(timer);
    uint32_t u32Cmpr = 0, u32Prescale = 0;

    /* Fastest possible timer working freq is (u32Clk / 2). While cmpr = 2, pre-scale = 0. */
    if(u32Freq >= (u32Clk >> 1))
    {
        u32Cmpr = 2;
    }
    else
    {
        u32Cmpr = u32Clk / u32Freq;
        u32Prescale = (u32Cmpr >> 24);  /* for 24 bits CMPDAT */
        if (u32Prescale > 0)
            u32Cmpr = u32Cmpr / (u32Prescale + 1);
    }

    timer->CTL = u32Mode | u32Prescale;
    timer->CMP = u32Cmpr;

    return(u32Clk / (u32Cmpr * (u32Prescale + 1)));
}

/**
  * @brief      Stop Timer Counting
  *
  * @param[in]  timer   The pointer of the specified Timer module.
  *
  * @return     None
  *
  * @details    This API stops timer counting and disable all timer interrupt function.
  */
void TIMER_Close(TIMER_T *timer)
{
    timer->CTL = 0;
    timer->EXTCTL = 0;
}

/**
  * @brief      Create a specify Delay Time
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  * @param[in]  u32Usec     Delay period in micro seconds. Valid values are between 100~1000000 (100 micro second ~ 1 second).
  *
  * @return     None
  *
  * @details    This API is used to create a delay loop for u32Usec micro seconds by using timer one-shot mode.
  * @note       This API overwrites the register setting of the timer used to count the delay time.
  * @note       This API use polling mode. So there is no need to enable interrupt for the timer module used to generate delay.
  */
void TIMER_Delay(TIMER_T *timer, uint32_t u32Usec)
{
    uint32_t u32Clk = TIMER_GetModuleClock(timer);
    uint32_t u32Prescale = 0, delay = (SystemCoreClock / u32Clk) + 1;
    uint32_t u32Cmpr, u32NsecPerTick;

    /* Clear current timer configuration */
    timer->CTL = 0;
    timer->EXTCTL = 0;

    if(u32Clk <= 1000000)   /* min delay is 1000 us if timer clock source is <= 1 MHz */
    {
        if(u32Usec < 1000)
            u32Usec = 1000;
        if(u32Usec > 1000000)
            u32Usec = 1000000;
    }
    else
    {
        if(u32Usec < 100)
            u32Usec = 100;
        if(u32Usec > 1000000)
            u32Usec = 1000000;
    }

    if(u32Clk <= 1000000)
    {
        u32Prescale = 0;
        u32NsecPerTick = 1000000000 / u32Clk;
        u32Cmpr = (u32Usec * 1000) / u32NsecPerTick;
    }
    else
    {
        u32Cmpr = u32Usec * (u32Clk / 1000000);
        u32Prescale = (u32Cmpr >> 24);  /* for 24 bits CMPDAT */
        if (u32Prescale > 0)
            u32Cmpr = u32Cmpr / (u32Prescale + 1);
    }

    timer->CMP = u32Cmpr;
    timer->CTL = TIMER_CTL_CNTEN_Msk | TIMER_ONESHOT_MODE | u32Prescale;

    /* When system clock is faster than timer clock, it is possible timer active bit cannot set in time while we check it. */
    /* And the while loop below return immediately, so put a tiny delay here allowing timer start counting and raise active flag. */
    for(; delay > 0; delay--)
    {
        __NOP();
    }

    while(timer->CTL & TIMER_CTL_ACTSTS_Msk);
}

/**
  * @brief      Enable Timer Capture Function
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  * @param[in]  u32CapMode  Timer capture mode. Could be
  *                         - \ref TIMER_CAPTURE_FREE_COUNTING_MODE
  *                         - \ref TIMER_CAPTURE_COUNTER_RESET_MODE
  * @param[in]  u32Edge     Timer capture event trigger edge. Possible values are
  *                         - \ref TIMER_CAPTURE_FALLING_EDGE
  *                         - \ref TIMER_CAPTURE_RISING_EDGE
  *                         - \ref TIMER_CAPTURE_FALLING_AND_RISING_EDGE
  *
  * @return     None
  *
  * @details    This API is used to enable timer capture function with specify capture trigger edge \n
  *             to get current counter value or reset counter value to 0.
  * @note       Timer frequency should be configured separately by using \ref TIMER_Open API, or program registers directly.
  */
void TIMER_EnableCapture(TIMER_T *timer, uint32_t u32CapMode, uint32_t u32Edge)
{
    timer->EXTCTL = (timer->EXTCTL & ~(TIMER_EXTCTL_CAPFUNCS_Msk | TIMER_EXTCTL_CAPEDGE_Msk)) |
                    u32CapMode | u32Edge | TIMER_EXTCTL_CAPEN_Msk;
}

/**
  * @brief      Disable Timer Capture Function
  *
  * @param[in]  timer   The pointer of the specified Timer module.
  *
  * @return     None
  *
  * @details    This API is used to disable the timer capture function.
  */
void TIMER_DisableCapture(TIMER_T *timer)
{
    timer->EXTCTL &= ~TIMER_EXTCTL_CAPEN_Msk;
}

/**
  * @brief      Enable Timer Counter Function
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  * @param[in]  u32Edge     Detection edge of counter pin. Could be ether
  *                         - \ref TIMER_COUNTER_FALLING_EDGE, or
  *                         - \ref TIMER_COUNTER_RISING_EDGE
  *
  * @return     None
  *
  * @details    This function is used to enable the timer counter function with specify detection edge.
  * @note       Timer compare value should be configured separately by using \ref TIMER_SET_CMP_VALUE macro or program registers directly.
  * @note       While using event counter function, \ref TIMER_TOGGLE_MODE cannot set as timer operation mode.
  */
void TIMER_EnableEventCounter(TIMER_T *timer, uint32_t u32Edge)
{
    timer->EXTCTL = (timer->EXTCTL & ~TIMER_EXTCTL_CNTPHASE_Msk) | u32Edge;
    timer->CTL |= TIMER_CTL_EXTCNTEN_Msk;
}

/**
  * @brief      Disable Timer Counter Function
  *
  * @param[in]  timer   The pointer of the specified Timer module.
  *
  * @return     None
  *
  * @details    This API is used to disable the timer event counter function.
  */
void TIMER_DisableEventCounter(TIMER_T *timer)
{
    timer->CTL &= ~TIMER_CTL_EXTCNTEN_Msk;
}

/**
  * @brief      Get Timer Clock Frequency
  *
  * @param[in]  timer   The pointer of the specified Timer module.
  *
  * @return     Timer clock frequency
  *
  * @details    This API is used to get the timer clock frequency.
  * @note       This API cannot return correct clock rate if timer source is from external clock input.
  */
uint32_t TIMER_GetModuleClock(TIMER_T *timer)
{
    uint32_t u32Src;
    const uint32_t au32Clk[] = {__HXT, __LXT, 0, 0, 0, __LIRC, 0, __HIRC};

    if(timer == TIMER0)
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR0SEL_Msk) >> CLK_CLKSEL1_TMR0SEL_Pos;
    else if(timer == TIMER1)
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR1SEL_Msk) >> CLK_CLKSEL1_TMR1SEL_Pos;
    else if(timer == TIMER2)
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR2SEL_Msk) >> CLK_CLKSEL1_TMR2SEL_Pos;
    else  /* Timer 3 */
        u32Src = (CLK->CLKSEL1 & CLK_CLKSEL1_TMR3SEL_Msk) >> CLK_CLKSEL1_TMR3SEL_Pos;

    if(u32Src == 2)
    {
        if ((timer == TIMER0) || (timer == TIMER1))
            return CLK_GetPCLK0Freq();
        else
            return CLK_GetPCLK1Freq();
    }

    return (au32Clk[u32Src]);
}

/**
  * @brief      Enable the Timer Frequency Counter Function
  *
  * @param[in]  timer           The pointer of the specified Timer module.
  * @param[in]  u32DropCount    This parameter has no effect in M031 series BSP.
  * @param[in]  u32Timeout      This parameter has no effect in M031 series BSP.
  * @param[in]  u32EnableInt    Enable interrupt assertion after capture complete or not. Valid values are TRUE and FALSE.
  *
  * @return     None
  *
  * @details    This function is used to calculate input event frequency. After enable
  *             this function, a pair of timers, such as TIMER0 and TIMER1,
  *             will be configured for this function. The mode used to calculate input
  *             event frequency is mentioned as "Inter Timer Trigger Mode" in Technical
  *             Reference Manual
  */
void TIMER_EnableFreqCounter(TIMER_T *timer, uint32_t u32DropCount, uint32_t u32Timeout, uint32_t u32EnableInt)
{
    TIMER_T *t;    /* store the timer base to configure compare value */

    t = (timer == TIMER0) ? TIMER1 : TIMER3;

    t->CMP = 0xFFFFFF;
    t->EXTCTL = u32EnableInt ? TIMER_EXTCTL_CAPIEN_Msk : 0;
    timer->CTL = TIMER_CTL_INTRGEN_Msk | TIMER_CTL_CNTEN_Msk;

    return;
}

/**
  * @brief      Disable the Timer Frequency Counter Function
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  *
  * @return     None
  */
void TIMER_DisableFreqCounter(TIMER_T *timer)
{
    timer->CTL &= ~TIMER_CTL_INTRGEN_Msk;
}

/**
  * @brief      Select Other Modules Triggered Source
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  * @param[in]  u32Src      Selects the interrupt source to trigger other modules. Could be:
  *                         - \ref TIMER_TRGSRC_TIMEOUT_EVENT
  *                         - \ref TIMER_TRGSRC_CAPTURE_EVENT
  *
  * @return     None
  */
void TIMER_SetTriggerSource(TIMER_T *timer, uint32_t u32Src)
{
    timer->CTL = (timer->CTL & ~TIMER_CTL_TRGSSEL_Msk) | u32Src;
}

/**
  * @brief      Set Modules Trigger by Timer Interrupt Event
  *
  * @param[in]  timer       The pointer of the specified Timer module.
  * @param[in]  u32Mask     The mask of modules (PWM, ADC, BPWM and PDMA) trigger by timer. Is the combination of
  *                         - \ref TIMER_TRG_TO_PWM
  *                         - \ref TIMER_TRG_TO_ADC
  *                         - \ref TIMER_TRG_TO_PDMA
  *                         - \ref TIMER_TRG_TO_BPWM
  *
  * @return     None
  */
void TIMER_SetTriggerTarget(TIMER_T *timer, uint32_t u32Mask)
{
    timer->CTL = (timer->CTL & ~(TIMER_CTL_TRGPWM_Msk | TIMER_CTL_TRGADC_Msk | TIMER_CTL_TRGPDMA_Msk | TIMER_CTL_TRGBPWM_Msk)) | (u32Mask);
}

/*@}*/ /* end of group TIMER_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group TIMER_Driver */

/*@}*/ /* end of group Standard_Driver */

/*** (C) COPYRIGHT 2018 Nuvoton Technology Corp. ***/