fix pre-commmit

8 files changed, 8 insertions, 11 deletions

diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk
index f37360a71..91d1261cb 100644
--- a/hw/bsp/lpc51/family.mk
+++ b/hw/bsp/lpc51/family.mk
@@ -40,7 +40,7 @@ INC += \
 	$(TOP)/$(SDK_DIR)/drivers/flexcomm/usart \
 	$(TOP)/$(SDK_DIR)/drivers/lpc_iocon \
 	$(TOP)/$(SDK_DIR)/drivers/lpc_gpio
-	
+
 SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S
 
 LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a
diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk
index 85b9a2cc9..b83942c87 100644
--- a/hw/bsp/lpc55/family.mk
+++ b/hw/bsp/lpc55/family.mk
@@ -62,5 +62,3 @@ INC += \
 	$(TOP)/$(SDK_DIR)/drivers/sctimer
 
 SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S
-
-
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h
index 079d0d312..aae811052 100644
--- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h
@@ -4,7 +4,7 @@
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
- 
+
 /***********************************************************************************************************************
  * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
  * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c
index fce756e72..47709951b 100644
--- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c
@@ -67,7 +67,7 @@ void BOARD_InitPins(void)
     /* PORT3 peripheral is released from reset */
     RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn);
 
-  
+
     /* Write to PORT0: Peripheral clock is enabled */
     CLOCK_EnableClock(kCLOCK_GatePORT0);
     /* LPUART0 peripheral is released from reset */
diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h
index db80b79f3..3f5dfefda 100644
--- a/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h
+++ b/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h
@@ -3,7 +3,7 @@
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
- 
+
 /***********************************************************************************************************************
  * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
  * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
@@ -167,4 +167,3 @@ void BOARD_BootClockFRO96M(void);
 #endif /* __cplusplus*/
 
 #endif /* _CLOCK_CONFIG_H_ */
-
diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c
index 317c311b5..de35103a6 100644
--- a/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c
+++ b/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c
@@ -81,7 +81,7 @@ void BOARD_InitPins(void)
   RESET_ReleasePeripheralReset(kGPIO0_RST_SHIFT_RSTn);
   /* PORT3 peripheral is released from reset */
   RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn);
-  
+
     /* PORT0: Peripheral clock is enabled */
     CLOCK_EnableClock(kCLOCK_GatePORT0);
     /* LPUART0 peripheral is released from reset */
diff --git a/hw/bsp/mcx/drivers/spc/fsl_spc.c b/hw/bsp/mcx/drivers/spc/fsl_spc.c
index b39a406cb..b16ca5fc5 100644
--- a/hw/bsp/mcx/drivers/spc/fsl_spc.c
+++ b/hw/bsp/mcx/drivers/spc/fsl_spc.c
@@ -454,9 +454,9 @@ status_t SPC_EnableLowPowerModeCoreLowVoltageDetect(SPC_Type *base, bool enable)
  *
  * This function selects the system VDD low-voltage level. Changing system VDD low-voltage level
  * must be done after disabling the System VDD low voltage reset and interrupt.
- * 
+ *
  * @deprecated In latest RM, reserved for all devices, will removed in next release.
- * 
+ *
  * param base SPC peripheral base address.
  * param level System VDD Low-Voltage level selection. See @ref spc_low_voltage_level_select_t for details.
  */
diff --git a/hw/bsp/mcx/drivers/spc/fsl_spc.h b/hw/bsp/mcx/drivers/spc/fsl_spc.h
index d3e75fbcb..69a001098 100644
--- a/hw/bsp/mcx/drivers/spc/fsl_spc.h
+++ b/hw/bsp/mcx/drivers/spc/fsl_spc.h
@@ -206,7 +206,7 @@ typedef enum _spc_dcdc_drive_strength
 {
     kSPC_DCDC_PulseRefreshMode = 0x0U,    /*!< DCDC_CORE Regulator Drive Strength set to Pulse Refresh Mode,
                                            * This enum member is only useful for Low Power Mode config, please
-                                           * note that pluse refresh mode is invalid in SLEEP mode.
+                                           * note that pulse refresh mode is invalid in SLEEP mode.
                                            */
     kSPC_DCDC_LowDriveStrength    = 0x1U, /*!< DCDC_CORE regulator Drive Strength set to low. */
     kSPC_DCDC_NormalDriveStrength = 0x2U, /*!< DCDC_CORE regulator Drive Strength set to Normal. */