docs: convert changelog release notes from RST to Markdown (#3746)0.21.0

* docs: convert changelog release notes from RST to Markdown

1 files changed, 0 insertions, 159 deletions

diff --git a/docs/changelog/0.7.0.rst b/docs/changelog/0.7.0.rst
deleted file mode 100644
index 664b323c8..000000000
--- a/docs/changelog/0.7.0.rst
+++ /dev/null
@@ -1,159 +0,0 @@
-0.7.0
-=====
-
-*2020-11-08*
-
-Device Controller Driver
-------------------------
-
-- Added new support for Espressif ESP32-S2
-- Added new support for Dialog DA1469x
-- Enhance STM32 Synopsys
-
-Support bus events disconnection/suspend/resume/wakeup
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-- Improve transfer performance with optimizing xfer and fifo size
-- Support Highspeed port (OTG_HS) with both internal and external PHY
-- Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY)
-- Add ISO transfer, fix odd/even frame
-- Fix FIFO flush during stall
-- Implement ``dcd_edpt_close()`` API
-- Support F105, F107
-
-Enhance STM32 fsdev
-^^^^^^^^^^^^^^^^^^^
-
-- Improve dcd fifo allocation
-- Fix ISTR race condition
-- Support remap USB IRQ on supported MCUs
-- Implement ``dcd_edpt_close()`` API
-
-- Enhance NUC 505: enhance set configure behavior
-
-Enhance SAMD
-^^^^^^^^^^^^
-
-- Fix race condition with setup packet
-- Add SAMD11 option ``OPT_MCU_SAMD11``
-- Add SAME5x option ``OPT_MCU_SAME5X``
-
-- Fix SAMG control data toggle and stall race condition
-
-Enhance nRF
-^^^^^^^^^^^
-
-- Fix hanged when ``tud_task()`` is called within critical section (disabled interrupt)
-- Fix disconnect bus event not submitted
-- Implement ISO transfer and ``dcd_edpt_close()``
-
-USB Device
-----------
-
-USBD
-^^^^
-
-- Add new class driver for **Bluetooth HCI** class driver with example can be found in `mynewt-tinyusb-example <https://github.com/hathach/mynewt-tinyusb-example>`__ since it needs mynewt OS to run with.
-- Fix USBD endpoint usage racing condition with ``usbd_edpt_claim()``/``usbd_edpt_release()``
-- Added ``tud_task_event_ready()`` and ``osal_queue_empty()``. This API is needed to check before enter low power mode with WFI/WFE
-- Rename USB IRQ Handler to ``dcd_int_handler()``. Application must define IRQ handler in which it calls this API.
-- Add ``dcd_connect()`` and ``dcd_disconnect()`` to enable/disable internal pullup on D+/D- on supported MCUs.
-- Add ``usbd_edpt_open()``
-- Remove ``dcd_set_config()``
-- Add ``OPT_OS_CUMSTOM`` as hook for application to overwrite and/or add their own OS implementation
-- Support SET_INTERFACE, GET_INTERFACE request
-- Add Logging for debug with optional uart/rtt/swo printf retarget or ``CFG_TUSB_DEBUG_PRINTF`` hook
-- Add IAR compiler support
-- Support multiple configuration descriptors. ``TUD_CONFIG_DESCRIPTOR()`` template has extra config_num as 1st argument
-- Improve USB Highspeed support with actual link speed detection with ``dcd_event_bus_reset()``
-
-Enhance class driver management
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-- ``usbd_driver_open()`` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver
-- Add application implemented class driver via ``usbd_app_driver_get_cb()``
-- IAD is handled to assign driver id
-
-- Added ``tud_descriptor_device_qualifier_cb()`` callback
-- Optimize ``tu_fifo`` bulk write/read transfer
-- Forward non-std control request to class driver
-- Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string)
-- Fix OSAL FreeRTOS yield from ISR
-
-USBNET
-^^^^^^
-
-- Remove ACM-EEM due to lack of support from host
-
-USBTMC
-^^^^^^
-
-- Fix descriptors when INT EP is disabled
-
-CDC
-^^^
-
-- Send zero length packet for end of data when needed
-- Add ``tud_cdc_tx_complete_cb()`` callback
-- Change ``tud_cdc_n_write_flush()`` return number of bytes forced to transfer, and flush when writing enough data to fifo
-
-MIDI
-^^^^
-
-- Add packet interface
-- Add multiple jack descriptors
-- Fix MIDI driver for sysex
-
-- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request
-
-- Rename some configure macro to make it clear that those are used directly for endpoint transfer
-
-  - ``CFG_TUD_HID_BUFSIZE`` to ``CFG_TUD_HID_EP_BUFSIZE``
-  - ``CFG_TUD_CDC_EPSIZE`` to ``CFG_TUD_CDC_EP_BUFSIZE``
-  - ``CFG_TUD_MSC_BUFSIZE`` to ``CFG_TUD_MSC_EP_BUFSIZE``
-  - ``CFG_TUD_MIDI_EPSIZE`` to ``CFG_TUD_MIDI_EP_BUFSIZE``
-
-HID
-^^^
-
-- Fix gamepad template descriptor
-- Add multiple HID interface API
-- Add extra comma to HID_REPORT_ID
-
-USB Host
---------
-
-- Rework USB host stack (still work in progress)
-   - Fix compile error with pipehandle
-   - Rework usbh control and enumeration as non-blocking
-
-- Improve Hub, MSC, HID host driver
-
-Examples
---------
-
-- Add new ``hid_composite_freertos``
-- Add new ``dynamic_configuration`` to demonstrate how to switch configuration descriptors
-- Add new ``hid_multiple_interface``
-
-Enhance ``net_lwip_webserver`` example
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-- Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both)
-- Update lwip to STABLE-2_1_2_RELEASE for ``net_lwip_webserver``
-
-- Added new Audio example: ``audio_test`` ``uac2_headsest``
-
-New Boards
-----------
-
-- Espressif ESP32-S2: saola_1, kaluga_1
-- STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo
-- Dialog DA1469x dk pro and dk usb
-- Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro
-- nRF: ItsyBitsy nRF52840
-
-Contributors
-------------
-
-Thanks to everyone who contributed to this release: @chang196700, @CraigHutchinson, @czeslawmakarski, @duempel, @gh2o, @hathach, @HiFiPhile, @j4cbo, @jepler, @jgressmann, @k0d, @kasjer, @kaysievers, @ktemkin, @majbthrd, @me-no-dev, @mzero, @PanRe, @pigrew, @salkinium, @UweBonnes, @xobs, @zlittell.