diff options
Diffstat (limited to 'docs/changelog/0.7.0.rst')
| -rw-r--r-- | docs/changelog/0.7.0.rst | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/docs/changelog/0.7.0.rst b/docs/changelog/0.7.0.rst deleted file mode 100644 index 664b323c8..000000000 --- a/docs/changelog/0.7.0.rst +++ /dev/null @@ -1,159 +0,0 @@ -0.7.0 -===== - -*2020-11-08* - -Device Controller Driver ------------------------- - -- Added new support for Espressif ESP32-S2 -- Added new support for Dialog DA1469x -- Enhance STM32 Synopsys - -Support bus events disconnection/suspend/resume/wakeup -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -- Improve transfer performance with optimizing xfer and fifo size -- Support Highspeed port (OTG_HS) with both internal and external PHY -- Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY) -- Add ISO transfer, fix odd/even frame -- Fix FIFO flush during stall -- Implement ``dcd_edpt_close()`` API -- Support F105, F107 - -Enhance STM32 fsdev -^^^^^^^^^^^^^^^^^^^ - -- Improve dcd fifo allocation -- Fix ISTR race condition -- Support remap USB IRQ on supported MCUs -- Implement ``dcd_edpt_close()`` API - -- Enhance NUC 505: enhance set configure behavior - -Enhance SAMD -^^^^^^^^^^^^ - -- Fix race condition with setup packet -- Add SAMD11 option ``OPT_MCU_SAMD11`` -- Add SAME5x option ``OPT_MCU_SAME5X`` - -- Fix SAMG control data toggle and stall race condition - -Enhance nRF -^^^^^^^^^^^ - -- Fix hanged when ``tud_task()`` is called within critical section (disabled interrupt) -- Fix disconnect bus event not submitted -- Implement ISO transfer and ``dcd_edpt_close()`` - -USB Device ----------- - -USBD -^^^^ - -- Add new class driver for **Bluetooth HCI** class driver with example can be found in `mynewt-tinyusb-example <https://github.com/hathach/mynewt-tinyusb-example>`__ since it needs mynewt OS to run with. -- Fix USBD endpoint usage racing condition with ``usbd_edpt_claim()``/``usbd_edpt_release()`` -- Added ``tud_task_event_ready()`` and ``osal_queue_empty()``. This API is needed to check before enter low power mode with WFI/WFE -- Rename USB IRQ Handler to ``dcd_int_handler()``. Application must define IRQ handler in which it calls this API. -- Add ``dcd_connect()`` and ``dcd_disconnect()`` to enable/disable internal pullup on D+/D- on supported MCUs. -- Add ``usbd_edpt_open()`` -- Remove ``dcd_set_config()`` -- Add ``OPT_OS_CUMSTOM`` as hook for application to overwrite and/or add their own OS implementation -- Support SET_INTERFACE, GET_INTERFACE request -- Add Logging for debug with optional uart/rtt/swo printf retarget or ``CFG_TUSB_DEBUG_PRINTF`` hook -- Add IAR compiler support -- Support multiple configuration descriptors. ``TUD_CONFIG_DESCRIPTOR()`` template has extra config_num as 1st argument -- Improve USB Highspeed support with actual link speed detection with ``dcd_event_bus_reset()`` - -Enhance class driver management -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -- ``usbd_driver_open()`` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver -- Add application implemented class driver via ``usbd_app_driver_get_cb()`` -- IAD is handled to assign driver id - -- Added ``tud_descriptor_device_qualifier_cb()`` callback -- Optimize ``tu_fifo`` bulk write/read transfer -- Forward non-std control request to class driver -- Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string) -- Fix OSAL FreeRTOS yield from ISR - -USBNET -^^^^^^ - -- Remove ACM-EEM due to lack of support from host - -USBTMC -^^^^^^ - -- Fix descriptors when INT EP is disabled - -CDC -^^^ - -- Send zero length packet for end of data when needed -- Add ``tud_cdc_tx_complete_cb()`` callback -- Change ``tud_cdc_n_write_flush()`` return number of bytes forced to transfer, and flush when writing enough data to fifo - -MIDI -^^^^ - -- Add packet interface -- Add multiple jack descriptors -- Fix MIDI driver for sysex - -- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request - -- Rename some configure macro to make it clear that those are used directly for endpoint transfer - - - ``CFG_TUD_HID_BUFSIZE`` to ``CFG_TUD_HID_EP_BUFSIZE`` - - ``CFG_TUD_CDC_EPSIZE`` to ``CFG_TUD_CDC_EP_BUFSIZE`` - - ``CFG_TUD_MSC_BUFSIZE`` to ``CFG_TUD_MSC_EP_BUFSIZE`` - - ``CFG_TUD_MIDI_EPSIZE`` to ``CFG_TUD_MIDI_EP_BUFSIZE`` - -HID -^^^ - -- Fix gamepad template descriptor -- Add multiple HID interface API -- Add extra comma to HID_REPORT_ID - -USB Host --------- - -- Rework USB host stack (still work in progress) - - Fix compile error with pipehandle - - Rework usbh control and enumeration as non-blocking - -- Improve Hub, MSC, HID host driver - -Examples --------- - -- Add new ``hid_composite_freertos`` -- Add new ``dynamic_configuration`` to demonstrate how to switch configuration descriptors -- Add new ``hid_multiple_interface`` - -Enhance ``net_lwip_webserver`` example -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -- Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) -- Update lwip to STABLE-2_1_2_RELEASE for ``net_lwip_webserver`` - -- Added new Audio example: ``audio_test`` ``uac2_headsest`` - -New Boards ----------- - -- Espressif ESP32-S2: saola_1, kaluga_1 -- STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo -- Dialog DA1469x dk pro and dk usb -- Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro -- nRF: ItsyBitsy nRF52840 - -Contributors ------------- - -Thanks to everyone who contributed to this release: @chang196700, @CraigHutchinson, @czeslawmakarski, @duempel, @gh2o, @hathach, @HiFiPhile, @j4cbo, @jepler, @jgressmann, @k0d, @kasjer, @kaysievers, @ktemkin, @majbthrd, @me-no-dev, @mzero, @PanRe, @pigrew, @salkinium, @UweBonnes, @xobs, @zlittell. |