Merge remote-tracking branch 'upstream/master' into hcd-template-comments

Signed-off-by: HiFiPhile <[email protected]>

5 files changed, 11 insertions, 313 deletions

diff --git a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
deleted file mode 100644
index 869500ad2..000000000
--- a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * FreeRTOS Kernel V10.0.0
- * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software. If you wish to use our Amazon
- * FreeRTOS name, please do so in a fair use way that does not cause confusion.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
- *
- * See http://www.freertos.org/a00110.html.
- *----------------------------------------------------------*/
-
-// skip if included from IAR assembler
-#ifndef __IASMARM__
-
-// Include MCU header
-#include "bsp/board_mcu.h"
-
-#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3
-  #error "ESP32-Sx should use IDF's FreeRTOSConfig.h"
-#endif
-
-// TODO fix later
-#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
-  extern u32 SystemCoreClock;
-#else
-  // FIXME cause redundant-decls warnings
-  extern uint32_t SystemCoreClock;
-#endif
-
-#endif
-
-/* Cortex M23/M33 port configuration. */
-#define configENABLE_MPU								        0
-#define configENABLE_FPU								        1
-#define configENABLE_TRUSTZONE					        0
-#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
-#define configRUN_FREERTOS_SECURE_ONLY          1
-
-#define configUSE_PREEMPTION                    1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configCPU_CLOCK_HZ                      SystemCoreClock
-#define configTICK_RATE_HZ                      ( 1000 )
-#define configMAX_PRIORITIES                    ( 5 )
-#define configMINIMAL_STACK_SIZE                ( 128 )
-#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
-#define configMAX_TASK_NAME_LEN                 16
-#define configUSE_16_BIT_TICKS                  0
-#define configIDLE_SHOULD_YIELD                 1
-#define configUSE_MUTEXES                       1
-#define configUSE_RECURSIVE_MUTEXES             1
-#define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               4
-#define configUSE_QUEUE_SETS                    0
-#define configUSE_TIME_SLICING                  0
-#define configUSE_NEWLIB_REENTRANT              0
-#define configENABLE_BACKWARD_COMPATIBILITY     1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
-
-#define configSUPPORT_STATIC_ALLOCATION         1
-#define configSUPPORT_DYNAMIC_ALLOCATION        0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK                    0
-#define configUSE_TICK_HOOK                    0
-#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
-#define configCHECK_FOR_STACK_OVERFLOW         2
-#define configCHECK_HANDLER_INSTALLATION       0
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS          0
-#define configUSE_TRACE_FACILITY               1 // legacy trace
-#define configUSE_STATS_FORMATTING_FUNCTIONS   0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                  0
-#define configMAX_CO_ROUTINE_PRIORITIES        2
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS                       1
-#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
-#define configTIMER_QUEUE_LENGTH               32
-#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet               0
-#define INCLUDE_uxTaskPriorityGet              0
-#define INCLUDE_vTaskDelete                    0
-#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
-#define INCLUDE_xResumeFromISR                 0
-#define INCLUDE_vTaskDelayUntil                1
-#define INCLUDE_vTaskDelay                     1
-#define INCLUDE_xTaskGetSchedulerState         0
-#define INCLUDE_xTaskGetCurrentTaskHandle      0
-#define INCLUDE_uxTaskGetStackHighWaterMark    0
-#define INCLUDE_xTaskGetIdleTaskHandle         0
-#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
-#define INCLUDE_pcTaskGetTaskName              0
-#define INCLUDE_eTaskGetState                  0
-#define INCLUDE_xEventGroupSetBitFromISR       0
-#define INCLUDE_xTimerPendFunctionCall         0
-
-#ifdef __RX__
-/* Renesas RX series */
-#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
-#define vTickISR								              INT_Excep_CMT0_CMI0
-#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
-#define configKERNEL_INTERRUPT_PRIORITY			  1
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
-
-#else
-
-/* FreeRTOS hooks to NVIC vectors */
-#define xPortPendSVHandler    PendSV_Handler
-#define xPortSysTickHandler   SysTick_Handler
-#define vPortSVCHandler       SVC_Handler
-
-//--------------------------------------------------------------------+
-// Interrupt nesting behavior configuration.
-//--------------------------------------------------------------------+
-#if defined(__NVIC_PRIO_BITS)
-  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
-	#define configPRIO_BITS       __NVIC_PRIO_BITS
-
-#elif defined(__ECLIC_INTCTLBITS)
-  // RISC-V Bumblebee core from nuclei
-  #define configPRIO_BITS       __ECLIC_INTCTLBITS
-
-#elif defined(__IASMARM__)
-  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
-  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
-  // IAR user must update this to correct value of the target MCU
-  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
-  #define configPRIO_BITS       2
-
-#else
-  #error "FreeRTOS configPRIO_BITS to be defined"
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-#endif
-
-#endif /* __FREERTOS_CONFIG__H */
diff --git a/examples/device/audio_test_freertos/src/freertos_hook.c b/examples/device/audio_test_freertos/src/freertos_hook.c
deleted file mode 100644
index 4920e3fae..000000000
--- a/examples/device/audio_test_freertos/src/freertos_hook.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-//--------------------------------------------------------------------+
-// INCLUDE
-//--------------------------------------------------------------------+
-#include "FreeRTOS.h"
-#include "task.h"
-#include "common/tusb_common.h"
-
-
-void vApplicationMallocFailedHook(void)
-{
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName)
-{
-  (void) pxTask;
-  (void) pcTaskName;
-
-  taskDISABLE_INTERRUPTS();
-  TU_ASSERT(false, );
-}
-
-/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
- * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
- * used by the Idle task. */
-void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize )
-{
-  /* If the buffers to be provided to the Idle task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xIdleTaskTCB;
-  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
-    state will be stored. */
-  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
-
-  /* Pass out the array that will be used as the Idle task's stack. */
-  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
-  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
-}
-
-/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
- * application must provide an implementation of vApplicationGetTimerTaskMemory()
- * to provide the memory that is used by the Timer service task. */
-void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize )
-{
-  /* If the buffers to be provided to the Timer task are declared inside this
-   * function then they must be declared static - otherwise they will be allocated on
-   * the stack and so not exists after this function exits. */
-  static StaticTask_t xTimerTaskTCB;
-  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
-
-  /* Pass out a pointer to the StaticTask_t structure in which the Timer
-    task's state will be stored. */
-  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
-
-  /* Pass out the array that will be used as the Timer task's stack. */
-  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
-
-  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
-    Note that, as the array is necessarily of type StackType_t,
-    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
-  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
-}
-
-#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X
-#include "iodefine.h"
-void vApplicationSetupTimerInterrupt(void)
-{
-  /* Enable CMT0 */
-  unsigned short oldPRCR = SYSTEM.PRCR.WORD;
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
-  MSTP(CMT0)       = 0;
-  SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR;
-
-  CMT0.CMCNT      = 0;
-  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
-  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
-  IR(CMT0, CMI0)  = 0;
-  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
-  IEN(CMT0, CMI0) = 1;
-  CMT.CMSTR0.BIT.STR0 = 1;
-}
-#endif
diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c
index a3751da40..c5143c3fc 100644
--- a/examples/device/audio_test_freertos/src/main.c
+++ b/examples/device/audio_test_freertos/src/main.c
@@ -38,7 +38,7 @@
 #include "bsp/board_api.h"
 #include "tusb.h"
 
-#if TUP_MCU_ESPRESSIF
+#if TUSB_MCU_VENDOR_ESPRESSIF
   // ESP-IDF need "freertos/" prefix in include path.
   // CFG_TUSB_OS_INC_PATH should be defined accordingly.
   #include "freertos/FreeRTOS.h"
@@ -133,16 +133,15 @@ int main(void)
 #endif
 
   // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3
-  #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  #if !TUSB_MCU_VENDOR_ESPRESSIF
     vTaskStartScheduler();
   #endif
 
   return 0;
 }
 
-#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-void app_main(void)
-{
+#if TUSB_MCU_VENDOR_ESPRESSIF
+void app_main(void) {
   main();
 }
 #endif
@@ -156,7 +155,11 @@ void usb_device_task(void* param)
   // init device stack on configured roothub port
   // This should be called after scheduler/kernel is started.
   // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
-  tud_init(BOARD_TUD_RHPORT);
+  tusb_rhport_init_t dev_init = {
+    .role = TUSB_ROLE_DEVICE,
+    .speed = TUSB_SPEED_AUTO
+  };
+  tusb_init(BOARD_TUD_RHPORT, &dev_init);
 
   if (board_init_after_tusb) {
     board_init_after_tusb();
diff --git a/examples/device/audio_test_freertos/src/plot_audio_samples.py b/examples/device/audio_test_freertos/src/plot_audio_samples.py
index 304b2d5de..46738eb3f 100644..100755
--- a/examples/device/audio_test_freertos/src/plot_audio_samples.py
+++ b/examples/device/audio_test_freertos/src/plot_audio_samples.py
@@ -1,3 +1,4 @@
+#!/usr/bin/env python3
 import sounddevice as sd
 import matplotlib.pyplot as plt
 import numpy as np
diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h
index 8b376a4c3..61c5cbb96 100644
--- a/examples/device/audio_test_freertos/src/tusb_config.h
+++ b/examples/device/audio_test_freertos/src/tusb_config.h
@@ -59,7 +59,7 @@ extern "C" {
 #endif
 
 // Espressif IDF requires "freertos/" prefix in include path
-#if TUP_MCU_ESPRESSIF
+#if TUSB_MCU_VENDOR_ESPRESSIF
 #define CFG_TUSB_OS_INC_PATH  freertos/
 #endif