Merge branch 'master' into rp2040-hcd-bulk

50 files changed, 1996 insertions, 3085 deletions

diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c
index 791f6cf60..2445593fe 100644
--- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c
+++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c
@@ -239,12 +239,12 @@ static void _dcd_ft90x_attach(void)
 
   CRITICAL_SECTION_BEGIN
   // Turn off the device enable bit.
-#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED
+#if BOARD_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED
   USBD_REG(fctrl) = 0;
-#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED
+#else // BOARD_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED
   //Set the full speed only bit if required.
   USBD_REG(fctrl) = MASK_USBD_FCTRL_MODE_FS_ONLY;
-#endif // BOARD_DEVICE_RHPORT_SPEED
+#endif // BOARD_TUD_MAX_SPEED
 
   // Clear first reset and suspend interrupts.
   do
@@ -291,7 +291,7 @@ static void _dcd_ft90x_detach(void)
   delayms(1);
 
   // Disable USB PHY
-  dcd_disconnect(BOARD_DEVICE_RHPORT_NUM);
+  dcd_disconnect(BOARD_TUD_RHPORT);
   delayms(1);
 
   // Disable Chip USB device clock/PM configuration.
@@ -312,7 +312,7 @@ static void _dcd_ft90x_detach(void)
 
 // Determine the speed of the USB to which we are connected.
 // Set the speed of the PHY accordingly. 
-// High speed can be disabled through CFG_TUSB_RHPORT0_MODE settings.
+// High speed can be disabled through CFG_TUSB_RHPORT0_MODE or CFG_TUD_MAX_SPEED settings.
 static void _ft90x_usb_speed(void)
 {
 	uint8_t  fctrl_val;
@@ -323,7 +323,7 @@ static void _ft90x_usb_speed(void)
 		delayus(200);
 	}
 
-#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED
+#if BOARD_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED
 
 	/* Detect high or full speed */
 	fctrl_val = MASK_USBD_FCTRL_USB_DEV_EN;
@@ -347,11 +347,11 @@ static void _ft90x_usb_speed(void)
 	delayus(125 + 5);
 	_speed = (USBD_REG(cmif) & MASK_USBD_CMIF_SOFIRQ) ?
 		TUSB_SPEED_HIGH : TUSB_SPEED_FULL;
-  dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true);
+  dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true);
 
 #endif /* !__FT930__ */
 
-#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED
+#else // BOARD_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED
 
 	/* User force set to full speed */
   _speed = TUSB_SPEED_FULL;
@@ -364,10 +364,10 @@ static void _ft90x_usb_speed(void)
 	}
 #endif
 	USBD_REG(fctrl) = fctrl_val;
-  dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true);
+  dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true);
 	return;
 
-#endif // BOARD_DEVICE_RHPORT_SPEED
+#endif // BOARD_TUD_MAX_SPEED
 }
 
 // Send a buffer to the USB IN FIFO.
@@ -649,6 +649,13 @@ void dcd_disconnect(uint8_t rhport)
   _ft90x_phy_enable(false);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
 
 //--------------------------------------------------------------------+
 // Endpoint API
@@ -892,7 +899,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
 
 void _ft90x_usbd_ISR(void)
 {
-  tud_int_handler(BOARD_DEVICE_RHPORT_NUM); // Resolves to dcd_int_handler().
+  tud_int_handler(BOARD_TUD_RHPORT); // Resolves to dcd_int_handler().
 }
 
 void dcd_int_handler(uint8_t rhport)
@@ -930,19 +937,19 @@ void dcd_int_handler(uint8_t rhport)
     {
       // Reset endpoints to default state.
       _ft90x_reset_edpts();
-      dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true);
+      dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true);
     }
     if (cmif & MASK_USBD_CMIF_SUSIRQ) //Handle Suspend interrupt
     {
-      dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SUSPEND, true);
+      dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_SUSPEND, true);
     }
     if (cmif & MASK_USBD_CMIF_RESIRQ) //Handle Resume interrupt
     {
-      dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true);
+      dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true);
     }
     if (cmif & MASK_USBD_CMIF_SOFIRQ) //Handle SOF interrupt
     {
-      dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SOF, true);
+      dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_SOF, true);
     }
   }
   // Handle endpoint interrupts.
@@ -973,7 +980,7 @@ void dcd_int_handler(uint8_t rhport)
         _ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request));
         
         // Send the packet to tinyusb.
-        dcd_event_setup_received(BOARD_DEVICE_RHPORT_NUM, _ft90x_setup_packet, true);
+        dcd_event_setup_received(BOARD_TUD_RHPORT, _ft90x_setup_packet, true);
 
         // Clear the interrupt that signals a SETUP packet is received.
         USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_SETUP);
@@ -995,7 +1002,7 @@ void dcd_int_handler(uint8_t rhport)
             xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, (uint8_t *)ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes);
           }
           // Now signal completion of data packet.
-          dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true);
+          dcd_event_xfer_complete(BOARD_TUD_RHPORT, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true);
 
           // Allow new transfers on the control endpoint.
           ep_xfer[USBD_EP_0].valid = 0;
@@ -1052,7 +1059,7 @@ void dcd_int_handler(uint8_t rhport)
           if (ep_xfer[ep_number].remain_size == 0)
           {
             // Signal tinyUSB.
-            dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true);
+            dcd_event_xfer_complete(BOARD_TUD_RHPORT, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true);
 
             // Allow new transfers on this endpoint.
             ep_xfer[ep_number].valid = 0;
@@ -1077,21 +1084,21 @@ void ft90x_usbd_pm_ISR(void)
   {
       // Signal connection interrupt
       SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
-      dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true);
+      dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true);
   }
 
   if (pmcfg & MASK_SYS_PMCFG_DEV_DIS_DEV)
   {
       // Signal disconnection interrupt
       SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
-      dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_UNPLUGGED, true);
+      dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_UNPLUGGED, true);
   }
 
   if (pmcfg & MASK_SYS_PMCFG_HOST_RST_DEV)
   {
       // Signal Host Reset interrupt
       SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
-      dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_BUS_RESET, true);
   }
 
   if (pmcfg & MASK_SYS_PMCFG_HOST_RESUME_DEV)
@@ -1102,7 +1109,7 @@ void ft90x_usbd_pm_ISR(void)
       {
           // If we are driving K-state on Device USB port;
           // We must maintain the 1ms requirement before resuming the phy
-          dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true);
+          dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true);
       }
   }
 }
diff --git a/src/portable/broadcom/synopsys/dcd_synopsys.c b/src/portable/broadcom/synopsys/dcd_synopsys.c
deleted file mode 100644
index c4881ee50..000000000
--- a/src/portable/broadcom/synopsys/dcd_synopsys.c
+++ /dev/null
@@ -1,1267 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2018 Scott Shawcroft, 2019 William D. Jones for Adafruit Industries
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- * Copyright (c) 2020 Jan Duempelmann
- * Copyright (c) 2020 Reinhard Panhuber
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "tusb_option.h"
-
-#if CFG_TUD_ENABLED &&         \
-    (CFG_TUSB_MCU == OPT_MCU_BCM2711 ) \
-
-
-#include "synopsys_common.h"
-
-#include "broadcom/interrupts.h"
-
-// Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval)
-// We disable SOF for now until needed later on
-#define USE_SOF     0
-
-// EP_MAX       : Max number of bi-directional endpoints including EP0
-// EP_FIFO_SIZE : Size of dedicated USB SRAM
-#if CFG_TUSB_MCU == OPT_MCU_BCM2711
-// #include "bcm2711.h"
-#define EP_MAX_FS       8
-#define EP_FIFO_SIZE_FS 4096
-#define EP_MAX_HS       8
-#define EP_FIFO_SIZE_HS 4096
-#else
-#error "Unsupported MCUs"
-#endif
-
-#define EP_MAX 8
-#define EP_FIFO_SIZE 4096
-
-// Info on values here: https://github.com/torvalds/linux/blob/79160a603bdb51916226caf4a6616cc4e1c58a58/Documentation/devicetree/bindings/usb/dwc2.yaml
-
-// From: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/bcm283x.dtsi
-// usb: usb@7e980000 {
-//   compatible = "brcm,bcm2835-usb";
-//   reg = <0x7e980000 0x10000>;
-//   interrupts = <1 9>;
-//   #address-cells = <1>;
-//   #size-cells = <0>;
-//   clocks = <&clk_usb>;
-//   clock-names = "otg";
-//   phys = <&usbphy>;
-//   phy-names = "usb2-phy";
-// };
-
-// From: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
-// SPDX-License-Identifier: GPL-2.0
-// &usb {
-//   dr_mode = "otg";
-//   g-rx-fifo-size = <256>;
-//   g-np-tx-fifo-size = <32>;
-  
-//    * According to dwc2 the sum of all device EP
-//    * fifo sizes shouldn't exceed 3776 bytes.
-   
-//   g-tx-fifo-size = <256 256 512 512 512 768 768>;
-// };
-
-// From: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/bcm2711-rpi.dtsi
-// &usb {
-//   /* Enable the FIQ support */
-//   reg = <0x7e980000 0x10000>,
-//         <0x7e00b200 0x200>;
-//   interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-//          <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-//   status = "disabled";
-// };
-
-// From: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/bcm2711.dtsi
-// &usb {
-//   interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-// };
-
-// From: https://github.com/torvalds/linux/blob/1d597682d3e669ec7021aa33d088ed3d136a5149/drivers/usb/dwc2/params.c
-// static void dwc2_set_bcm_params(struct dwc2_hsotg *hsotg)
-// {
-//   struct dwc2_core_params *p = &hsotg->params;
-
-//   p->host_rx_fifo_size = 774;
-//   p->max_transfer_size = 65535;
-//   p->max_packet_count = 511;
-//   p->ahbcfg = 0x10;
-// }
-
-#include "device/dcd.h"
-
-TU_VERIFY_STATIC(sizeof(USB_OTG_GlobalTypeDef) == 0x140, "size is incorrect");
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM
-//--------------------------------------------------------------------+
-
-#define RHPORT_REGS_BASE USB_OTG_GLOBAL_BASE
-
-#define GLOBAL_BASE(_port)     ((USB_OTG_GlobalTypeDef*) RHPORT_REGS_BASE)
-#define DEVICE_BASE(_port)     (USB_OTG_DeviceTypeDef *) (USB_OTG_DEVICE_BASE)
-#define OUT_EP_BASE(_port)     (USB_OTG_OUTEndpointTypeDef *) (RHPORT_REGS_BASE + USB_OTG_OUT_ENDPOINT_BASE)
-#define IN_EP_BASE(_port)      (USB_OTG_INEndpointTypeDef *) (RHPORT_REGS_BASE + USB_OTG_IN_ENDPOINT_BASE)
-#define FIFO_BASE(_port, _x)   ((volatile uint32_t *) (RHPORT_REGS_BASE + USB_OTG_FIFO_BASE + (_x) * USB_OTG_FIFO_SIZE))
-
-enum
-{
-  DCD_HIGH_SPEED        = 0, // Highspeed mode
-  DCD_FULL_SPEED_USE_HS = 1, // Full speed in Highspeed port (probably with internal PHY)
-  DCD_FULL_SPEED        = 3, // Full speed with internal PHY
-};
-
-static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[2];
-
-typedef struct {
-  uint8_t * buffer;
-  tu_fifo_t * ff;
-  uint16_t total_len;
-  uint16_t max_size;
-  uint8_t interval;
-} xfer_ctl_t;
-
-typedef volatile uint32_t * usb_fifo_t;
-
-xfer_ctl_t xfer_status[EP_MAX][2];
-#define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir]
-
-// EP0 transfers are limited to 1 packet - larger sizes has to be split
-static uint16_t ep0_pending[2];                   // Index determines direction as tusb_dir_t type
-
-// TX FIFO RAM allocation so far in words - RX FIFO size is readily available from usb_otg->GRXFSIZ
-static uint16_t _allocated_fifo_words_tx;         // TX FIFO size in words (IN EPs)
-static bool _out_ep_closed;                       // Flag to check if RX FIFO size needs an update (reduce its size)
-
-// Calculate the RX FIFO size according to recommendations from reference manual
-static inline uint16_t calc_rx_ff_size(uint16_t ep_size)
-{
-  return 15 + 2*(ep_size/4) + 2*EP_MAX;
-}
-
-static void update_grxfsiz(uint8_t rhport)
-{
-  (void) rhport;
-
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-
-  // Determine largest EP size for RX FIFO
-  uint16_t max_epsize = 0;
-  for (uint8_t epnum = 0; epnum < EP_MAX; epnum++)
-  {
-    max_epsize = tu_max16(max_epsize, xfer_status[epnum][TUSB_DIR_OUT].max_size);
-  }
-
-  // Update size of RX FIFO
-  usb_otg->GRXFSIZ = calc_rx_ff_size(max_epsize);
-}
-
-// Setup the control endpoint 0.
-static void bus_reset(uint8_t rhport)
-{
-  (void) rhport;
-
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  tu_memclr(xfer_status, sizeof(xfer_status));
-  _out_ep_closed = false;
-
-  // clear device address
-  dev->DCFG &= ~USB_OTG_DCFG_DAD_Msk;
-
-  // 1. NAK for all OUT endpoints
-  for(uint8_t n = 0; n < EP_MAX; n++) {
-    out_ep[n].DOEPCTL |= USB_OTG_DOEPCTL_SNAK;
-  }
-
-  // 2. Un-mask interrupt bits
-  dev->DAINTMSK = (1 << USB_OTG_DAINTMSK_OEPM_Pos) | (1 << USB_OTG_DAINTMSK_IEPM_Pos);
-  dev->DOEPMSK = USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM;
-  dev->DIEPMSK = USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM;
-
-  // "USB Data FIFOs" section in reference manual
-  // Peripheral FIFO architecture
-  //
-  // The FIFO is split up in a lower part where the RX FIFO is located and an upper part where the TX FIFOs start.
-  // We do this to allow the RX FIFO to grow dynamically which is possible since the free space is located
-  // between the RX and TX FIFOs. This is required by ISO OUT EPs which need a bigger FIFO than the standard
-  // configuration done below.
-  //
-  // Dynamically FIFO sizes are of interest only for ISO EPs since all others are usually not opened and closed.
-  // All EPs other than ISO are opened as soon as the driver starts up i.e. when the host sends a
-  // configure interface command. Hence, all IN EPs other the ISO will be located at the top. IN ISO EPs are usually
-  // opened when the host sends an additional command: setInterface. At this point in time
-  // the ISO EP will be located next to the free space and can change its size. In case more IN EPs change its size
-  // an additional memory
-  //
-  // --------------- 320 or 1024 ( 1280 or 4096 bytes )
-  // | IN FIFO 0   |
-  // --------------- (320 or 1024) - 16
-  // | IN FIFO 1   |
-  // --------------- (320 or 1024) - 16 - x
-  // |   . . . .   |
-  // --------------- (320 or 1024) - 16 - x - y - ... - z
-  // | IN FIFO MAX |
-  // ---------------
-  // |    FREE     |
-  // --------------- GRXFSIZ
-  // | OUT FIFO    |
-  // | ( Shared )  |
-  // --------------- 0
-  //
-  // According to "FIFO RAM allocation" section in RM, FIFO RAM are allocated as follows (each word 32-bits):
-  // - Each EP IN needs at least max packet size, 16 words is sufficient for EP0 IN
-  //
-  // - All EP OUT shared a unique OUT FIFO which uses
-  //   - 13 for setup packets + control words (up to 3 setup packets).
-  //   - 1 for global NAK (not required/used here).
-  //   - Largest-EPsize / 4 + 1. ( FS: 64 bytes, HS: 512 bytes). Recommended is  "2 x (Largest-EPsize/4) + 1"
-  //   - 2 for each used OUT endpoint
-  //
-  //   Therefore GRXFSIZ = 13 + 1 + 1 + 2 x (Largest-EPsize/4) + 2 x EPOUTnum
-  //   - FullSpeed (64 Bytes ): GRXFSIZ = 15 + 2 x  16 + 2 x EP_MAX = 47  + 2 x EP_MAX
-  //   - Highspeed (512 bytes): GRXFSIZ = 15 + 2 x 128 + 2 x EP_MAX = 271 + 2 x EP_MAX
-  //
-  //   NOTE: Largest-EPsize & EPOUTnum is actual used endpoints in configuration. Since DCD has no knowledge
-  //   of the overall picture yet. We will use the worst scenario: largest possible + EP_MAX
-  //
-  //   For Isochronous, largest EP size can be 1023/1024 for FS/HS respectively. In addition if multiple ISO
-  //   are enabled at least "2 x (Largest-EPsize/4) + 1" are recommended.  Maybe provide a macro for application to
-  //   overwrite this.
-
-  #if TUD_OPT_HIGH_SPEED
-  usb_otg->GRXFSIZ = calc_rx_ff_size(512);
-  #else
-  usb_otg->GRXFSIZ = calc_rx_ff_size(64);
-  #endif
-
-  _allocated_fifo_words_tx = 16;
-
-  // Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word )
-  usb_otg->DIEPTXF0_HNPTXFSIZ = (16 << USB_OTG_TX0FD_Pos) | (EP_FIFO_SIZE/4 - _allocated_fifo_words_tx);
-
-  // Fixed control EP0 size to 64 bytes
-  in_ep[0].DIEPCTL &= ~(0x03 << USB_OTG_DIEPCTL_MPSIZ_Pos);
-  xfer_status[0][TUSB_DIR_OUT].max_size = xfer_status[0][TUSB_DIR_IN].max_size = 64;
-
-  out_ep[0].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos);
-
-  usb_otg->GINTMSK |= USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IEPINT;
-}
-
-// Set turn-around timeout according to link speed
-extern uint32_t SystemCoreClock;
-static void set_turnaround(USB_OTG_GlobalTypeDef * usb_otg, tusb_speed_t speed)
-{
-  usb_otg->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
-
-  if ( speed == TUSB_SPEED_HIGH )
-  {
-    // Use fixed 0x09 for Highspeed
-    usb_otg->GUSBCFG |= (0x09 << USB_OTG_GUSBCFG_TRDT_Pos);
-  }
-  else
-  {
-    // Turnaround timeout depends on the MCU clock
-    uint32_t turnaround;
-
-    if ( SystemCoreClock >= 32000000U )
-      turnaround = 0x6U;
-    else if ( SystemCoreClock >= 27500000U )
-      turnaround = 0x7U;
-    else if ( SystemCoreClock >= 24000000U )
-      turnaround = 0x8U;
-    else if ( SystemCoreClock >= 21800000U )
-      turnaround = 0x9U;
-    else if ( SystemCoreClock >= 20000000U )
-      turnaround = 0xAU;
-    else if ( SystemCoreClock >= 18500000U )
-      turnaround = 0xBU;
-    else if ( SystemCoreClock >= 17200000U )
-      turnaround = 0xCU;
-    else if ( SystemCoreClock >= 16000000U )
-      turnaround = 0xDU;
-    else if ( SystemCoreClock >= 15000000U )
-      turnaround = 0xEU;
-    else
-      turnaround = 0xFU;
-
-    // Fullspeed depends on MCU clocks, but we will use 0x06 for 32+ Mhz
-    usb_otg->GUSBCFG |= (turnaround << USB_OTG_GUSBCFG_TRDT_Pos);
-  }
-}
-
-static tusb_speed_t get_speed(uint8_t rhport)
-{
-  (void) rhport;
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  uint32_t const enum_spd = (dev->DSTS & USB_OTG_DSTS_ENUMSPD_Msk) >> USB_OTG_DSTS_ENUMSPD_Pos;
-  return (enum_spd == DCD_HIGH_SPEED) ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL;
-}
-
-static void set_speed(uint8_t rhport, tusb_speed_t speed)
-{
-  uint32_t bitvalue;
-
-  if ( rhport == 1 )
-  {
-    bitvalue = ((TUSB_SPEED_HIGH == speed) ? DCD_HIGH_SPEED : DCD_FULL_SPEED_USE_HS);
-  }
-  else
-  {
-    bitvalue = DCD_FULL_SPEED;
-  }
-
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-
-  // Clear and set speed bits
-  dev->DCFG &= ~(3 << USB_OTG_DCFG_DSPD_Pos);
-  dev->DCFG |= (bitvalue << USB_OTG_DCFG_DSPD_Pos);
-}
-
-#if 0
-// From CM4IO xtal to usb hub, may not be correct
-#define HSE_VALUE 24000000
-
-static bool USB_HS_PHYCInit(void)
-{
-  USB_HS_PHYC_GlobalTypeDef *usb_hs_phyc = (USB_HS_PHYC_GlobalTypeDef*) USB_HS_PHYC_CONTROLLER_BASE;
-
-  // Enable LDO
-  usb_hs_phyc->USB_HS_PHYC_LDO |= USB_HS_PHYC_LDO_ENABLE;
-
-  // Wait until LDO ready
-  while ( 0 == (usb_hs_phyc->USB_HS_PHYC_LDO & USB_HS_PHYC_LDO_STATUS) ) {}
-
-  uint32_t phyc_pll = 0;
-
-  // TODO Try to get HSE_VALUE from registers instead of depending CFLAGS
-  switch ( HSE_VALUE )
-  {
-    case 12000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_12MHZ   ; break;
-    case 12500000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_12_5MHZ ; break;
-    case 16000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_16MHZ   ; break;
-    case 24000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_24MHZ   ; break;
-    case 25000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_25MHZ   ; break;
-    case 32000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_Msk     ; break; // Value not defined in header
-    default:
-      TU_ASSERT(0);
-  }
-  usb_hs_phyc->USB_HS_PHYC_PLL = phyc_pll;
-
-  // Control the tuning interface of the High Speed PHY
-  // Use magic value (USB_HS_PHYC_TUNE_VALUE) from ST driver
-  usb_hs_phyc->USB_HS_PHYC_TUNE |= 0x00000F13U;
-
-  // Enable PLL internal PHY
-  usb_hs_phyc->USB_HS_PHYC_PLL |= USB_HS_PHYC_PLL_PLLEN;
-
-  // Original ST code has 2 ms delay for PLL stabilization.
-  // Primitive test shows that more than 10 USB un/replug cycle showed no error with enumeration
-
-  return true;
-}
-#endif
-
-static void edpt_schedule_packets(uint8_t rhport, uint8_t const epnum, uint8_t const dir, uint16_t const num_packets, uint16_t total_bytes)
-{
-  (void) rhport;
-
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  // EP0 is limited to one packet each xfer
-  // We use multiple transaction of xfer->max_size length to get a whole transfer done
-  if(epnum == 0) {
-    xfer_ctl_t * const xfer = XFER_CTL_BASE(epnum, dir);
-    total_bytes = tu_min16(ep0_pending[dir], xfer->max_size);
-    ep0_pending[dir] -= total_bytes;
-  }
-
-  // IN and OUT endpoint xfers are interrupt-driven, we just schedule them here.
-  if(dir == TUSB_DIR_IN) {
-    // A full IN transfer (multiple packets, possibly) triggers XFRC.
-    in_ep[epnum].DIEPTSIZ = (num_packets << USB_OTG_DIEPTSIZ_PKTCNT_Pos) |
-        ((total_bytes << USB_OTG_DIEPTSIZ_XFRSIZ_Pos) & USB_OTG_DIEPTSIZ_XFRSIZ_Msk);
-
-    in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_EPENA | USB_OTG_DIEPCTL_CNAK;
-    // For ISO endpoint set correct odd/even bit for next frame.
-    if ((in_ep[epnum].DIEPCTL & USB_OTG_DIEPCTL_EPTYP) == USB_OTG_DIEPCTL_EPTYP_0 && (XFER_CTL_BASE(epnum, dir))->interval == 1)
-    {
-      // Take odd/even bit from frame counter.
-      uint32_t const odd_frame_now = (dev->DSTS & (1u << USB_OTG_DSTS_FNSOF_Pos));
-      in_ep[epnum].DIEPCTL |= (odd_frame_now ? USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk : USB_OTG_DIEPCTL_SODDFRM_Msk);
-    }
-    // Enable fifo empty interrupt only if there are something to put in the fifo.
-    if(total_bytes != 0) {
-      dev->DIEPEMPMSK |= (1 << epnum);
-    }
-  } else {
-    // A full OUT transfer (multiple packets, possibly) triggers XFRC.
-    out_ep[epnum].DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT_Msk | USB_OTG_DOEPTSIZ_XFRSIZ);
-    out_ep[epnum].DOEPTSIZ |= (num_packets << USB_OTG_DOEPTSIZ_PKTCNT_Pos) |
-        ((total_bytes << USB_OTG_DOEPTSIZ_XFRSIZ_Pos) & USB_OTG_DOEPTSIZ_XFRSIZ_Msk);
-
-    out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
-    if ((out_ep[epnum].DOEPCTL & USB_OTG_DOEPCTL_EPTYP) == USB_OTG_DOEPCTL_EPTYP_0 && (XFER_CTL_BASE(epnum, dir))->interval == 1)
-    {
-      // Take odd/even bit from frame counter.
-      uint32_t const odd_frame_now = (dev->DSTS & (1u << USB_OTG_DSTS_FNSOF_Pos));
-      out_ep[epnum].DOEPCTL |= (odd_frame_now ? USB_OTG_DOEPCTL_SD0PID_SEVNFRM_Msk : USB_OTG_DOEPCTL_SODDFRM_Msk);
-    }
-  }
-}
-
-/*------------------------------------------------------------------*/
-/* Controller API
- *------------------------------------------------------------------*/
-
-TU_ATTR_UNUSED
-static void reset_core(USB_OTG_GlobalTypeDef * usb_otg) {
-  while ((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0) {}
-
-  TU_LOG(2, "    resetting\r\n");
-  usb_otg->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
-  TU_LOG(2, "    waiting\r\n");
-  while ((usb_otg->GRSTCTL & (USB_OTG_GRSTCTL_AHBIDL | USB_OTG_GRSTCTL_CSRST)) != USB_OTG_GRSTCTL_AHBIDL) {}
-  TU_LOG(2, "    reset done\r\n");
-}
-
-void dcd_init (uint8_t rhport)
-{
-  printf("test done\r\n");
-  // Programming model begins in the last section of the chapter on the USB
-  // peripheral in each Reference Manual.
-  TU_LOG(2, "    dcd_init\r\n");
-
-  TU_LOG2("Test 123\r\n");
-
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-
-#if 1
-  // No VBUS sense
-  usb_otg->GCCFG &= ~(1UL << 21); // USB_OTG_GCCFG_VBDEN
-
-  // B-peripheral session valid override enable
-  usb_otg->GOTGCTL |= (1UL << 6); // USB_OTG_GOTGCTL_BVALOEN
-  usb_otg->GOTGCTL |= (1UL << 7); // USB_OTG_GOTGCTL_BVALOVAL
-
-  // Force device mode
-  usb_otg->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD;
-  usb_otg->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
-
-  // deactivate internal PHY
-  usb_otg->GCCFG &= ~USB_OTG_GCCFG_PWRDWN;
-
-  // Init The UTMI Interface
-  usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
-
-  // Select default internal VBUS Indicator and Drive for ULPI
-  usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
-
-  // Select UTMI Interface
-  usb_otg->GUSBCFG &= ~(1UL << 4); // USB_OTG_GUSBCFG_ULPI_UTMI_SEL
-  usb_otg->GCCFG |= (1UL << 32);   // USB_OTG_GCCFG_PHYHSEN
-
-  // Enables control of a High Speed USB PHY
-  //USB_HS_PHYCInit();
-
-  // Reset core after selecting PHY
-  // Wait AHB IDLE, reset then wait until it is cleared
-//  while ((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U) {}
-//  usb_otg->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
-//  while ((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST) {}
-
-  reset_core(usb_otg);
-
-  // Restart PHY clock
-  *((volatile uint32_t *)(RHPORT_REGS_BASE + USB_OTG_PCGCCTL_BASE)) = 0;
-
-#else
-
-  // ReadBackReg(&Core->Usb);
-  // Core->Usb.UlpiDriveExternalVbus = 0;
-  // Core->Usb.TsDlinePulseEnable = 0;
-  // WriteThroughReg(&Core->Usb);
-
-  // This sequence is modeled after: https://github.com/Chadderz121/csud/blob/e13b9355d043a9cdd384b335060f1bc0416df61e/source/hcd/dwc/designware20.c#L689
-  usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIEVBUSD);
-  reset_core(usb_otg);
-
-  //   Core->Usb.ModeSelect = UTMI;
-  //   LOG_DEBUG("HCD: Interface: UTMI+.\n");
-  //   Core->Usb.PhyInterface = false;
-
-  //   HcdReset();
-  TU_LOG2("init phy\r\n");
-  usb_otg->GUSBCFG |= (1 << 4); // bit four sets UTMI+ mode
-  usb_otg->GUSBCFG &= ~(1 << 3); // bit three disables phy interface
-  reset_core(usb_otg);
-
-  //   LOG_DEBUG("HCD: ULPI FSLS configuration: disabled.\n");
-  //   Core->Usb.UlpiFsls = false;
-  //   Core->Usb.ulpi_clk_sus_m = false;
-  usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_ULPICSM);
-
-  // LOG_DEBUG("HCD: DMA configuration: enabled.\n");
-  // Core->Ahb.DmaEnable = true;
-  // Core->Ahb.DmaRemainderMode = Incremental;
-  usb_otg->GAHBCFG &= ~(1 << 23); // Remainder mode
-  usb_otg->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
-
-  //   LOG_DEBUG("HCD: HNP/SRP configuration: HNP, SRP.\n");
-  //   Core->Usb.HnpCapable = true;
-  //   Core->Usb.SrpCapable = true;
-  usb_otg->GUSBCFG |= USB_OTG_GUSBCFG_SRPCAP | USB_OTG_GUSBCFG_HNPCAP;
-
-#endif
-
-  // Clear all interrupts
-  usb_otg->GINTSTS |= usb_otg->GINTSTS;
-
-  // Required as part of core initialization.
-  // TODO: How should mode mismatch be handled? It will cause
-  // the core to stop working/require reset.
-  usb_otg->GINTMSK |= USB_OTG_GINTMSK_OTGINT | USB_OTG_GINTMSK_MMISM;
-
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-
-  // If USB host misbehaves during status portion of control xfer
-  // (non zero-length packet), send STALL back and discard.
-  dev->DCFG |=  USB_OTG_DCFG_NZLSOHSK;
-
-  set_speed(rhport, TUSB_SPEED_HIGH);
-
-  // TODO internal phy (full speed)
-  usb_otg->GCCFG |= USB_OTG_GCCFG_PWRDWN;
-
-  usb_otg->GINTMSK |= USB_OTG_GINTMSK_USBRST   | USB_OTG_GINTMSK_ENUMDNEM |
-      USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_WUIM     |
-      USB_OTG_GINTMSK_RXFLVLM  | (USE_SOF ? USB_OTG_GINTMSK_SOFM : 0);
-
-  // Enable global interrupt
-  usb_otg->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
-
-  dcd_connect(rhport);
-}
-
-void dcd_int_enable (uint8_t rhport)
-{
-  (void) rhport;
-  BP_EnableIRQ(USB_IRQn);
-}
-
-void dcd_int_disable (uint8_t rhport)
-{
-  (void) rhport;
-  BP_DisableIRQ(USB_IRQn);
-}
-
-void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
-{
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  dev->DCFG = (dev->DCFG & ~USB_OTG_DCFG_DAD_Msk) | (dev_addr << USB_OTG_DCFG_DAD_Pos);
-
-  // Response with status after changing device address
-  dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
-}
-
-static void remote_wakeup_delay(void)
-{
-  // try to delay for 1 ms
-  uint32_t count = SystemCoreClock / 1000;
-  while ( count-- )
-  {
-    // __NOP();
-  }
-}
-
-void dcd_remote_wakeup(uint8_t rhport)
-{
-  (void) rhport;
-
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-
-  // set remote wakeup
-  dev->DCTL |= USB_OTG_DCTL_RWUSIG;
-
-  // enable SOF to detect bus resume
-  usb_otg->GINTSTS = USB_OTG_GINTSTS_SOF;
-  usb_otg->GINTMSK |= USB_OTG_GINTMSK_SOFM;
-
-  // Per specs: remote wakeup signal bit must be clear within 1-15ms
-  remote_wakeup_delay();
-
-  dev->DCTL &= ~USB_OTG_DCTL_RWUSIG;
-}
-
-void dcd_connect(uint8_t rhport)
-{
-  (void) rhport;
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  dev->DCTL &= ~USB_OTG_DCTL_SDIS;
-}
-
-void dcd_disconnect(uint8_t rhport)
-{
-  (void) rhport;
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  dev->DCTL |= USB_OTG_DCTL_SDIS;
-}
-
-
-/*------------------------------------------------------------------*/
-/* DCD Endpoint port
- *------------------------------------------------------------------*/
-
-bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
-{
-  (void) rhport;
-
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
-  uint8_t const dir   = tu_edpt_dir(desc_edpt->bEndpointAddress);
-
-  TU_ASSERT(epnum < EP_MAX);
-
-  xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
-  xfer->max_size = tu_edpt_packet_size(desc_edpt);
-  xfer->interval = desc_edpt->bInterval;
-
-  uint16_t const fifo_size = (xfer->max_size + 3) / 4; // Round up to next full word
-
-  if(dir == TUSB_DIR_OUT)
-  {
-    // Calculate required size of RX FIFO
-    uint16_t const sz = calc_rx_ff_size(4*fifo_size);
-
-    // If size_rx needs to be extended check if possible and if so enlarge it
-    if (usb_otg->GRXFSIZ < sz)
-    {
-      TU_ASSERT(sz + _allocated_fifo_words_tx <= EP_FIFO_SIZE/4);
-
-      // Enlarge RX FIFO
-      usb_otg->GRXFSIZ = sz;
-    }
-
-    out_ep[epnum].DOEPCTL |= (1 << USB_OTG_DOEPCTL_USBAEP_Pos)        |
-        (desc_edpt->bmAttributes.xfer << USB_OTG_DOEPCTL_EPTYP_Pos)   |
-        (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DOEPCTL_SD0PID_SEVNFRM : 0) |
-        (xfer->max_size << USB_OTG_DOEPCTL_MPSIZ_Pos);
-
-    dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_OEPM_Pos + epnum));
-  }
-  else
-  {
-    // "USB Data FIFOs" section in reference manual
-    // Peripheral FIFO architecture
-    //
-    // --------------- 320 or 1024 ( 1280 or 4096 bytes )
-    // | IN FIFO 0   |
-    // --------------- (320 or 1024) - 16
-    // | IN FIFO 1   |
-    // --------------- (320 or 1024) - 16 - x
-    // |   . . . .   |
-    // --------------- (320 or 1024) - 16 - x - y - ... - z
-    // | IN FIFO MAX |
-    // ---------------
-    // |    FREE     |
-    // --------------- GRXFSIZ
-    // | OUT FIFO    |
-    // | ( Shared )  |
-    // --------------- 0
-    //
-    // In FIFO is allocated by following rules:
-    // - IN EP 1 gets FIFO 1, IN EP "n" gets FIFO "n".
-
-    // Check if free space is available
-    TU_ASSERT(_allocated_fifo_words_tx + fifo_size + usb_otg->GRXFSIZ <= EP_FIFO_SIZE/4);
-
-    _allocated_fifo_words_tx += fifo_size;
-
-    TU_LOG(2, "    Allocated %u bytes at offset %u", fifo_size*4, EP_FIFO_SIZE-_allocated_fifo_words_tx*4);
-
-    // DIEPTXF starts at FIFO #1.
-    // Both TXFD and TXSA are in unit of 32-bit words.
-    usb_otg->DIEPTXF[epnum - 1] = (fifo_size << USB_OTG_DIEPTXF_INEPTXFD_Pos) | (EP_FIFO_SIZE/4 - _allocated_fifo_words_tx);
-
-    in_ep[epnum].DIEPCTL |= (1 << USB_OTG_DIEPCTL_USBAEP_Pos) |
-        (epnum << USB_OTG_DIEPCTL_TXFNUM_Pos) |
-        (desc_edpt->bmAttributes.xfer << USB_OTG_DIEPCTL_EPTYP_Pos) |
-        (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DIEPCTL_SD0PID_SEVNFRM : 0) |
-        (xfer->max_size << USB_OTG_DIEPCTL_MPSIZ_Pos);
-
-    dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_IEPM_Pos + epnum));
-  }
-
-  return true;
-}
-
-// Close all non-control endpoints, cancel all pending transfers if any.
-void dcd_edpt_close_all (uint8_t rhport)
-{
-  (void) rhport;
-
-//  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  // Disable non-control interrupt
-  dev->DAINTMSK = (1 << USB_OTG_DAINTMSK_OEPM_Pos) | (1 << USB_OTG_DAINTMSK_IEPM_Pos);
-
-  for(uint8_t n = 1; n < EP_MAX; n++)
-  {
-    // disable OUT endpoint
-    out_ep[n].DOEPCTL = 0;
-    xfer_status[n][TUSB_DIR_OUT].max_size = 0;
-
-    // disable IN endpoint
-    in_ep[n].DIEPCTL = 0;
-    xfer_status[n][TUSB_DIR_IN].max_size = 0;
-  }
-
-  // reset allocated fifo IN
-  _allocated_fifo_words_tx = 16;
-}
-
-bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
-{
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-  xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
-  xfer->buffer      = buffer;
-  xfer->ff          = NULL;
-  xfer->total_len   = total_bytes;
-
-  // EP0 can only handle one packet
-  if(epnum == 0) {
-    ep0_pending[dir] = total_bytes;
-    // Schedule the first transaction for EP0 transfer
-    edpt_schedule_packets(rhport, epnum, dir, 1, ep0_pending[dir]);
-    return true;
-  }
-
-  uint16_t num_packets = (total_bytes / xfer->max_size);
-  uint16_t const short_packet_size = total_bytes % xfer->max_size;
-
-  // Zero-size packet is special case.
-  if(short_packet_size > 0 || (total_bytes == 0)) {
-    num_packets++;
-  }
-
-  // Schedule packets to be sent within interrupt
-  edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes);
-
-  return true;
-}
-
-// The number of bytes has to be given explicitly to allow more flexible control of how many
-// bytes should be written and second to keep the return value free to give back a boolean
-// success message. If total_bytes is too big, the FIFO will copy only what is available
-// into the USB buffer!
-bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes)
-{
-  // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1
-  TU_ASSERT(ff->item_size == 1);
-
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-  xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
-  xfer->buffer      = NULL;
-  xfer->ff          = ff;
-  xfer->total_len   = total_bytes;
-
-  uint16_t num_packets = (total_bytes / xfer->max_size);
-  uint16_t const short_packet_size = total_bytes % xfer->max_size;
-
-  // Zero-size packet is special case.
-  if(short_packet_size > 0 || (total_bytes == 0)) num_packets++;
-
-  // Schedule packets to be sent within interrupt
-  edpt_schedule_packets(rhport, epnum, dir, num_packets, total_bytes);
-
-  return true;
-}
-
-static void dcd_edpt_disable (uint8_t rhport, uint8_t ep_addr, bool stall)
-{
-  (void) rhport;
-
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-  if(dir == TUSB_DIR_IN) {
-    // Only disable currently enabled non-control endpoint
-    if ( (epnum == 0) || !(in_ep[epnum].DIEPCTL & USB_OTG_DIEPCTL_EPENA) ){
-      in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SNAK | (stall ? USB_OTG_DIEPCTL_STALL : 0);
-    } else {
-      // Stop transmitting packets and NAK IN xfers.
-      in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SNAK;
-      while((in_ep[epnum].DIEPINT & USB_OTG_DIEPINT_INEPNE) == 0);
-
-      // Disable the endpoint.
-      in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_EPDIS | (stall ? USB_OTG_DIEPCTL_STALL : 0);
-      while((in_ep[epnum].DIEPINT & USB_OTG_DIEPINT_EPDISD_Msk) == 0);
-      in_ep[epnum].DIEPINT = USB_OTG_DIEPINT_EPDISD;
-    }
-
-    // Flush the FIFO, and wait until we have confirmed it cleared.
-    usb_otg->GRSTCTL |= (epnum << USB_OTG_GRSTCTL_TXFNUM_Pos);
-    usb_otg->GRSTCTL |= USB_OTG_GRSTCTL_TXFFLSH;
-    while((usb_otg->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH_Msk) != 0);
-  } else {
-    // Only disable currently enabled non-control endpoint
-    if ( (epnum == 0) || !(out_ep[epnum].DOEPCTL & USB_OTG_DOEPCTL_EPENA) ){
-      out_ep[epnum].DOEPCTL |= stall ? USB_OTG_DOEPCTL_STALL : 0;
-    } else {
-      // Asserting GONAK is required to STALL an OUT endpoint.
-      // Simpler to use polling here, we don't use the "B"OUTNAKEFF interrupt
-      // anyway, and it can't be cleared by user code. If this while loop never
-      // finishes, we have bigger problems than just the stack.
-      dev->DCTL |= USB_OTG_DCTL_SGONAK;
-      while((usb_otg->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF_Msk) == 0);
-
-      // Ditto here- disable the endpoint.
-      out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_EPDIS | (stall ? USB_OTG_DOEPCTL_STALL : 0);
-      while((out_ep[epnum].DOEPINT & USB_OTG_DOEPINT_EPDISD_Msk) == 0);
-      out_ep[epnum].DOEPINT = USB_OTG_DOEPINT_EPDISD;
-
-      // Allow other OUT endpoints to keep receiving.
-      dev->DCTL |= USB_OTG_DCTL_CGONAK;
-    }
-  }
-}
-
-/**
- * Close an endpoint.
- */
-void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr)
-{
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-  dcd_edpt_disable(rhport, ep_addr, false);
-
-  // Update max_size
-  xfer_status[epnum][dir].max_size = 0;  // max_size = 0 marks a disabled EP - required for changing FIFO allocation
-
-  if (dir == TUSB_DIR_IN)
-  {
-    uint16_t const fifo_size = (usb_otg->DIEPTXF[epnum - 1] & USB_OTG_DIEPTXF_INEPTXFD_Msk) >> USB_OTG_DIEPTXF_INEPTXFD_Pos;
-    uint16_t const fifo_start = (usb_otg->DIEPTXF[epnum - 1] & USB_OTG_DIEPTXF_INEPTXSA_Msk) >> USB_OTG_DIEPTXF_INEPTXSA_Pos;
-    // For now only the last opened endpoint can be closed without fuss.
-    TU_ASSERT(fifo_start == EP_FIFO_SIZE/4 - _allocated_fifo_words_tx,);
-    _allocated_fifo_words_tx -= fifo_size;
-  }
-  else
-  {
-    _out_ep_closed = true;     // Set flag such that RX FIFO gets reduced in size once RX FIFO is empty
-  }
-}
-
-void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr)
-{
-  dcd_edpt_disable(rhport, ep_addr, true);
-}
-
-void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
-{
-  (void) rhport;
-
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-  // Clear stall and reset data toggle
-  if(dir == TUSB_DIR_IN) {
-    in_ep[epnum].DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
-    in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
-  } else {
-    out_ep[epnum].DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
-    out_ep[epnum].DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
-  }
-}
-
-/*------------------------------------------------------------------*/
-
-// Read a single data packet from receive FIFO
-static void read_fifo_packet(uint8_t rhport, uint8_t * dst, uint16_t len)
-{
-  (void) rhport;
-
-  usb_fifo_t rx_fifo = FIFO_BASE(rhport, 0);
-
-  // Reading full available 32 bit words from fifo
-  uint16_t full_words = len >> 2;
-  for(uint16_t i = 0; i < full_words; i++) {
-    uint32_t tmp = *rx_fifo;
-    dst[0] = tmp & 0x000000FF;
-    dst[1] = (tmp & 0x0000FF00) >> 8;
-    dst[2] = (tmp & 0x00FF0000) >> 16;
-    dst[3] = (tmp & 0xFF000000) >> 24;
-    dst += 4;
-  }
-
-  // Read the remaining 1-3 bytes from fifo
-  uint8_t bytes_rem = len & 0x03;
-  if(bytes_rem != 0) {
-    uint32_t tmp = *rx_fifo;
-    dst[0] = tmp & 0x000000FF;
-    if(bytes_rem > 1) {
-      dst[1] = (tmp & 0x0000FF00) >> 8;
-    }
-    if(bytes_rem > 2) {
-      dst[2] = (tmp & 0x00FF0000) >> 16;
-    }
-  }
-}
-
-// Write a single data packet to EPIN FIFO
-static void write_fifo_packet(uint8_t rhport, uint8_t fifo_num, uint8_t * src, uint16_t len)
-{
-  (void) rhport;
-
-  usb_fifo_t tx_fifo = FIFO_BASE(rhport, fifo_num);
-
-  // Pushing full available 32 bit words to fifo
-  uint16_t full_words = len >> 2;
-  for(uint16_t i = 0; i < full_words; i++){
-    *tx_fifo = (src[3] << 24) | (src[2] << 16) | (src[1] << 8) | src[0];
-    src += 4;
-  }
-
-  // Write the remaining 1-3 bytes into fifo
-  uint8_t bytes_rem = len & 0x03;
-  if(bytes_rem){
-    uint32_t tmp_word = 0;
-    tmp_word |= src[0];
-    if(bytes_rem > 1){
-      tmp_word |= src[1] << 8;
-    }
-    if(bytes_rem > 2){
-      tmp_word |= src[2] << 16;
-    }
-    *tx_fifo = tmp_word;
-  }
-}
-
-static void handle_rxflvl_ints(uint8_t rhport, USB_OTG_OUTEndpointTypeDef * out_ep) {
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  usb_fifo_t rx_fifo = FIFO_BASE(rhport, 0);
-
-  // Pop control word off FIFO
-  uint32_t ctl_word = usb_otg->GRXSTSP;
-  uint8_t pktsts = (ctl_word & USB_OTG_GRXSTSP_PKTSTS_Msk) >> USB_OTG_GRXSTSP_PKTSTS_Pos;
-  uint8_t epnum = (ctl_word &  USB_OTG_GRXSTSP_EPNUM_Msk) >>  USB_OTG_GRXSTSP_EPNUM_Pos;
-  uint16_t bcnt = (ctl_word & USB_OTG_GRXSTSP_BCNT_Msk) >> USB_OTG_GRXSTSP_BCNT_Pos;
-
-  switch(pktsts) {
-    case 0x01: // Global OUT NAK (Interrupt)
-      break;
-
-    case 0x02: // Out packet recvd
-    {
-      xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT);
-
-      // Read packet off RxFIFO
-      if (xfer->ff)
-      {
-        // Ring buffer
-        tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *)(uintptr_t) rx_fifo, bcnt);
-      }
-      else
-      {
-        // Linear buffer
-        read_fifo_packet(rhport, xfer->buffer, bcnt);
-
-        // Increment pointer to xfer data
-        xfer->buffer += bcnt;
-      }
-
-      // Truncate transfer length in case of short packet
-      if(bcnt < xfer->max_size) {
-        xfer->total_len -= (out_ep[epnum].DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DOEPTSIZ_XFRSIZ_Pos;
-        if(epnum == 0) {
-          xfer->total_len -= ep0_pending[TUSB_DIR_OUT];
-          ep0_pending[TUSB_DIR_OUT] = 0;
-        }
-      }
-    }
-    break;
-
-    case 0x03: // Out packet done (Interrupt)
-      break;
-
-    case 0x04: // Setup packet done (Interrupt)
-      out_ep[epnum].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos);
-      break;
-
-    case 0x06: // Setup packet recvd
-      // We can receive up to three setup packets in succession, but
-      // only the last one is valid.
-      _setup_packet[0] = (* rx_fifo);
-      _setup_packet[1] = (* rx_fifo);
-      break;
-
-    default: // Invalid
-      TU_BREAKPOINT();
-      break;
-  }
-}
-
-static void handle_epout_ints(uint8_t rhport, USB_OTG_DeviceTypeDef * dev, USB_OTG_OUTEndpointTypeDef * out_ep) {
-  // DAINT for a given EP clears when DOEPINTx is cleared.
-  // OEPINT will be cleared when DAINT's out bits are cleared.
-  for(uint8_t n = 0; n < EP_MAX; n++) {
-    xfer_ctl_t * xfer = XFER_CTL_BASE(n, TUSB_DIR_OUT);
-
-    if(dev->DAINT & (1 << (USB_OTG_DAINT_OEPINT_Pos + n))) {
-      // SETUP packet Setup Phase done.
-      if(out_ep[n].DOEPINT & USB_OTG_DOEPINT_STUP) {
-        out_ep[n].DOEPINT =  USB_OTG_DOEPINT_STUP;
-        dcd_event_setup_received(rhport, (uint8_t*) &_setup_packet[0], true);
-      }
-
-      // OUT XFER complete
-      if(out_ep[n].DOEPINT & USB_OTG_DOEPINT_XFRC) {
-        out_ep[n].DOEPINT = USB_OTG_DOEPINT_XFRC;
-
-        // EP0 can only handle one packet
-        if((n == 0) && ep0_pending[TUSB_DIR_OUT]) {
-          // Schedule another packet to be received.
-          edpt_schedule_packets(rhport, n, TUSB_DIR_OUT, 1, ep0_pending[TUSB_DIR_OUT]);
-        } else {
-          dcd_event_xfer_complete(rhport, n, xfer->total_len, XFER_RESULT_SUCCESS, true);
-        }
-      }
-    }
-  }
-}
-
-static void handle_epin_ints(uint8_t rhport, USB_OTG_DeviceTypeDef * dev, USB_OTG_INEndpointTypeDef * in_ep) {
-  // DAINT for a given EP clears when DIEPINTx is cleared.
-  // IEPINT will be cleared when DAINT's out bits are cleared.
-  for ( uint8_t n = 0; n < EP_MAX; n++ )
-  {
-    xfer_ctl_t *xfer = XFER_CTL_BASE(n, TUSB_DIR_IN);
-
-    if ( dev->DAINT & (1 << (USB_OTG_DAINT_IEPINT_Pos + n)) )
-    {
-      // IN XFER complete (entire xfer).
-      if ( in_ep[n].DIEPINT & USB_OTG_DIEPINT_XFRC )
-      {
-        in_ep[n].DIEPINT = USB_OTG_DIEPINT_XFRC;
-
-        // EP0 can only handle one packet
-        if((n == 0) && ep0_pending[TUSB_DIR_IN]) {
-          // Schedule another packet to be transmitted.
-          edpt_schedule_packets(rhport, n, TUSB_DIR_IN, 1, ep0_pending[TUSB_DIR_IN]);
-        } else {
-          dcd_event_xfer_complete(rhport, n | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true);
-        }
-      }
-
-      // XFER FIFO empty
-      if ( (in_ep[n].DIEPINT & USB_OTG_DIEPINT_TXFE) && (dev->DIEPEMPMSK & (1 << n)) )
-      {
-        // DIEPINT's TXFE bit is read-only, software cannot clear it.
-        // It will only be cleared by hardware when written bytes is more than
-        // - 64 bytes or
-        // - Half of TX FIFO size (configured by DIEPTXF)
-
-        uint16_t remaining_packets = (in_ep[n].DIEPTSIZ & USB_OTG_DIEPTSIZ_PKTCNT_Msk) >> USB_OTG_DIEPTSIZ_PKTCNT_Pos;
-
-        // Process every single packet (only whole packets can be written to fifo)
-        for(uint16_t i = 0; i < remaining_packets; i++)
-        {
-          uint16_t const remaining_bytes = (in_ep[n].DIEPTSIZ & USB_OTG_DIEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DIEPTSIZ_XFRSIZ_Pos;
-
-          // Packet can not be larger than ep max size
-          uint16_t const packet_size = tu_min16(remaining_bytes, xfer->max_size);
-
-          // It's only possible to write full packets into FIFO. Therefore DTXFSTS register of current
-          // EP has to be checked if the buffer can take another WHOLE packet
-          if(packet_size > ((in_ep[n].DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV_Msk) << 2)) break;
-
-          // Push packet to Tx-FIFO
-          if (xfer->ff)
-          {
-            usb_fifo_t tx_fifo = FIFO_BASE(rhport, n);
-            tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *)(uintptr_t) tx_fifo, packet_size);
-          }
-          else
-          {
-            write_fifo_packet(rhport, n, xfer->buffer, packet_size);
-
-            // Increment pointer to xfer data
-            xfer->buffer += packet_size;
-          }
-        }
-
-        // Turn off TXFE if all bytes are written.
-        if (((in_ep[n].DIEPTSIZ & USB_OTG_DIEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DIEPTSIZ_XFRSIZ_Pos) == 0)
-        {
-          dev->DIEPEMPMSK &= ~(1 << n);
-        }
-      }
-    }
-  }
-}
-
-void dcd_int_handler(uint8_t rhport)
-{
-  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
-  USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
-  USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
-  USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
-
-  uint32_t const int_status = usb_otg->GINTSTS & usb_otg->GINTMSK;
-
-  if(int_status & USB_OTG_GINTSTS_USBRST)
-  {
-    // USBRST is start of reset.
-    usb_otg->GINTSTS = USB_OTG_GINTSTS_USBRST;
-    bus_reset(rhport);
-  }
-
-  if(int_status & USB_OTG_GINTSTS_ENUMDNE)
-  {
-    // ENUMDNE is the end of reset where speed of the link is detected
-
-    usb_otg->GINTSTS = USB_OTG_GINTSTS_ENUMDNE;
-
-    tusb_speed_t const speed = get_speed(rhport);
-
-    set_turnaround(usb_otg, speed);
-    dcd_event_bus_reset(rhport, speed, true);
-  }
-
-  if(int_status & USB_OTG_GINTSTS_USBSUSP)
-  {
-    usb_otg->GINTSTS = USB_OTG_GINTSTS_USBSUSP;
-    dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true);
-  }
-
-  if(int_status & USB_OTG_GINTSTS_WKUINT)
-  {
-    usb_otg->GINTSTS = USB_OTG_GINTSTS_WKUINT;
-    dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true);
-  }
-
-  // TODO check USB_OTG_GINTSTS_DISCINT for disconnect detection
-  // if(int_status & USB_OTG_GINTSTS_DISCINT)
-
-  if(int_status & USB_OTG_GINTSTS_OTGINT)
-  {
-    // OTG INT bit is read-only
-    uint32_t const otg_int = usb_otg->GOTGINT;
-
-    if (otg_int & USB_OTG_GOTGINT_SEDET)
-    {
-      dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true);
-    }
-
-    usb_otg->GOTGINT = otg_int;
-  }
-
-  if(int_status & USB_OTG_GINTSTS_SOF)
-  {
-    usb_otg->GINTSTS = USB_OTG_GINTSTS_SOF;
-
-    // Disable SOF interrupt since currently only used for remote wakeup detection
-    usb_otg->GINTMSK &= ~USB_OTG_GINTMSK_SOFM;
-
-    dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true);
-  }
-
-  // RxFIFO non-empty interrupt handling.
-  if(int_status & USB_OTG_GINTSTS_RXFLVL)
-  {
-    // RXFLVL bit is read-only
-
-    // Mask out RXFLVL while reading data from FIFO
-    usb_otg->GINTMSK &= ~USB_OTG_GINTMSK_RXFLVLM;
-
-    // Loop until all available packets were handled
-    do
-    {
-      handle_rxflvl_ints(rhport, out_ep);
-    } while(usb_otg->GINTSTS & USB_OTG_GINTSTS_RXFLVL);
-
-    // Manage RX FIFO size
-    if (_out_ep_closed)
-    {
-      update_grxfsiz(rhport);
-
-      // Disable flag
-      _out_ep_closed = false;
-    }
-
-    usb_otg->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
-  }
-
-  // OUT endpoint interrupt handling.
-  if(int_status & USB_OTG_GINTSTS_OEPINT)
-  {
-    // OEPINT is read-only
-    handle_epout_ints(rhport, dev, out_ep);
-  }
-
-  // IN endpoint interrupt handling.
-  if(int_status & USB_OTG_GINTSTS_IEPINT)
-  {
-    // IEPINT bit read-only
-    handle_epin_ints(rhport, dev, in_ep);
-  }
-
-  //  // Check for Incomplete isochronous IN transfer
-  //  if(int_status & USB_OTG_GINTSTS_IISOIXFR) {
-  //    printf("      IISOIXFR!\r\n");
-  ////    TU_LOG2("      IISOIXFR!\r\n");
-  //  }
-}
-
-#endif
diff --git a/src/portable/broadcom/synopsys/synopsys_common.h b/src/portable/broadcom/synopsys/synopsys_common.h
deleted file mode 100644
index 81ce3b4a9..000000000
--- a/src/portable/broadcom/synopsys/synopsys_common.h
+++ /dev/null
@@ -1,1476 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    synopsys_common.h
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M3 Device USB OTG peripheral Header File. 
-  *          This file contains the USB OTG peripheral register's definitions, bits 
-  *          definitions and memory mapping for STM32F1xx devices.
-  *            
-  *          This file contains:
-  *           - Data structures and the address mapping for the USB OTG peripheral
-  *           - The Peripheral's registers declarations and bits definition
-  *           - Macros to access the peripheral's registers hardware
-  *  
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-#include "stdint.h"
-
-#pragma once
-
-#ifdef __cplusplus
-  #define   __I   volatile
-#else
-  #define   __I   volatile const
-#endif
-#define     __O   volatile
-#define     __IO  volatile
-#define     __IM  volatile const
-#define     __OM  volatile
-#define     __IOM volatile
-
-/** 
-  * @brief __USB_OTG_Core_register
-  */
-
-typedef struct
-{
-  __IO uint32_t GOTGCTL;              /*!<  USB_OTG Control and Status Register       Address offset: 000h */
-  __IO uint32_t GOTGINT;              /*!<  USB_OTG Interrupt Register                Address offset: 004h */
-  __IO uint32_t GAHBCFG;              /*!<  Core AHB Configuration Register           Address offset: 008h */
-  __IO uint32_t GUSBCFG;              /*!<  Core USB Configuration Register           Address offset: 00Ch */
-  __IO uint32_t GRSTCTL;              /*!<  Core Reset Register                       Address offset: 010h */
-  __IO uint32_t GINTSTS;              /*!<  Core Interrupt Register                   Address offset: 014h */
-  __IO uint32_t GINTMSK;              /*!<  Core Interrupt Mask Register              Address offset: 018h */
-  __IO uint32_t GRXSTSR;              /*!<  Receive Sts Q Read Register               Address offset: 01Ch */
-  __IO uint32_t GRXSTSP;              /*!<  Receive Sts Q Read & POP Register         Address offset: 020h */
-  __IO uint32_t GRXFSIZ;              /*!< Receive FIFO Size Register                 Address offset: 024h */
-  __IO uint32_t DIEPTXF0_HNPTXFSIZ;   /*!<  EP0 / Non Periodic Tx FIFO Size Register  Address offset: 028h */
-  __IO uint32_t HNPTXSTS;             /*!<  Non Periodic Tx FIFO/Queue Sts reg        Address offset: 02Ch */
-  uint32_t Reserved30[2];             /*!< Reserved 030h*/
-  __IO uint32_t GCCFG;                /*!< General Purpose IO Register                Address offset: 038h */
-  __IO uint32_t CID;                  /*!< User ID Register                             03Ch */
-  __IO uint32_t GSNPSID;              /* USB_OTG core ID                                040h*/
-  __IO uint32_t GHWCFG1;              /* User HW config1                                044h*/
-  __IO uint32_t GHWCFG2;              /* User HW config2                                048h*/
-  __IO uint32_t GHWCFG3;              /*!< User HW config3                              04Ch */
-  uint32_t  Reserved6;                /*!< Reserved                                     050h */
-  __IO uint32_t GLPMCFG;              /*!< LPM Register                                 054h */
-  __IO uint32_t GPWRDN;               /*!< Power Down Register                          058h */
-  __IO uint32_t GDFIFOCFG;            /*!< DFIFO Software Config Register               05Ch */
-   __IO uint32_t GADPCTL;             /*!< ADP Timer, Control and Status Register       60Ch */
-    uint32_t  Reserved43[39];         /*!< Reserved                                058h-0FFh */
-  __IO uint32_t HPTXFSIZ;             /*!< Host Periodic Tx FIFO Size Reg             Address offset: 100h */
-  __IO uint32_t DIEPTXF[0x0F];        /*!< dev Periodic Transmit FIFO                 Address offset: 0x104 */
-} USB_OTG_GlobalTypeDef;
-
-
-
-/** 
-  * @brief __device_Registers
-  */
-
-typedef struct 
-{
-  __IO uint32_t DCFG;                 /*!< dev Configuration Register                 Address offset: 800h*/
-  __IO uint32_t DCTL;                 /*!< dev Control Register                       Address offset: 804h*/
-  __IO uint32_t DSTS;                 /*!< dev Status Register (RO)                   Address offset: 808h*/
-  uint32_t Reserved0C;                /*!< Reserved 80Ch*/
-  __IO uint32_t DIEPMSK;              /*!< dev IN Endpoint Mask                       Address offset: 810h*/
-  __IO uint32_t DOEPMSK;              /*!< dev OUT Endpoint Mask                      Address offset: 814h*/
-  __IO uint32_t DAINT;                /*!< dev All Endpoints Itr Reg                  Address offset: 818h*/
-  __IO uint32_t DAINTMSK;             /*!< dev All Endpoints Itr Mask                 Address offset: 81Ch*/
-  uint32_t  Reserved20;               /*!< Reserved 820h*/
-  uint32_t Reserved9;                 /*!< Reserved 824h*/
-  __IO uint32_t DVBUSDIS;             /*!< dev VBUS discharge Register                Address offset: 828h*/
-  __IO uint32_t DVBUSPULSE;           /*!< dev VBUS Pulse Register                    Address offset: 82Ch*/
-  __IO uint32_t DTHRCTL;              /*!< dev thr                                    Address offset: 830h*/
-  __IO uint32_t DIEPEMPMSK;           /*!< dev empty msk                              Address offset: 834h*/
-  __IO uint32_t DEACHINT;             /*!< dedicated EP interrupt                     Address offset: 838h*/
-  __IO uint32_t DEACHMSK;             /*!< dedicated EP msk                           Address offset: 83Ch*/  
-  uint32_t Reserved40;                /*!< dedicated EP mask                          Address offset: 840h*/
-  __IO uint32_t DINEP1MSK;            /*!< dedicated EP mask                          Address offset: 844h*/
-  uint32_t  Reserved44[15];           /*!< Reserved 844-87Ch*/
-  __IO uint32_t DOUTEP1MSK;           /*!< dedicated EP msk                           Address offset: 884h*/
-} USB_OTG_DeviceTypeDef;
-
-/** 
-  * @brief __IN_Endpoint-Specific_Register
-  */
-
-typedef struct 
-{
-  __IO uint32_t DIEPCTL;              /*!< dev IN Endpoint Control Reg                900h + (ep_num * 20h) + 00h*/
-  uint32_t Reserved04;                /*!< Reserved                                   900h + (ep_num * 20h) + 04h*/
-  __IO uint32_t DIEPINT;              /*!< dev IN Endpoint Itr Reg                    900h + (ep_num * 20h) + 08h*/
-  uint32_t Reserved0C;                /*!< Reserved                                   900h + (ep_num * 20h) + 0Ch*/
-  __IO uint32_t DIEPTSIZ;             /*!< IN Endpoint Txfer Size                     900h + (ep_num * 20h) + 10h*/
-  __IO uint32_t DIEPDMA;              /*!< IN Endpoint DMA Address Reg                900h + (ep_num * 20h) + 14h*/
-  __IO uint32_t DTXFSTS;              /*!< IN Endpoint Tx FIFO Status Reg             900h + (ep_num * 20h) + 18h*/
-  uint32_t Reserved18;                /*!< Reserved                                   900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/
-} USB_OTG_INEndpointTypeDef;
-
-/** 
-  * @brief __OUT_Endpoint-Specific_Registers
-  */
-
-typedef struct 
-{
-  __IO uint32_t DOEPCTL;              /*!< dev OUT Endpoint Control Reg               B00h + (ep_num * 20h) + 00h*/
-  uint32_t Reserved04;                /*!< Reserved                                   B00h + (ep_num * 20h) + 04h*/
-  __IO uint32_t DOEPINT;              /*!< dev OUT Endpoint Itr Reg                   B00h + (ep_num * 20h) + 08h*/
-  uint32_t Reserved0C;                /*!< Reserved                                   B00h + (ep_num * 20h) + 0Ch*/
-  __IO uint32_t DOEPTSIZ;             /*!< dev OUT Endpoint Txfer Size                B00h + (ep_num * 20h) + 10h*/
-  __IO uint32_t DOEPDMA;              /*!< dev OUT Endpoint DMA Address               B00h + (ep_num * 20h) + 14h*/
-  uint32_t Reserved18[2];             /*!< Reserved                                   B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
-} USB_OTG_OUTEndpointTypeDef;
-
-/** 
-  * @brief __Host_Mode_Register_Structures
-  */
-
-typedef struct 
-{
-  __IO uint32_t HCFG;                 /*!< Host Configuration Register    400h*/
-  __IO uint32_t HFIR;                 /*!< Host Frame Interval Register   404h*/
-  __IO uint32_t HFNUM;                /*!< Host Frame Nbr/Frame Remaining 408h*/
-  uint32_t Reserved40C;               /*!< Reserved                       40Ch*/
-  __IO uint32_t HPTXSTS;              /*!< Host Periodic Tx FIFO/ Queue Status 410h*/
-  __IO uint32_t HAINT;                /*!< Host All Channels Interrupt Register 414h*/
-  __IO uint32_t HAINTMSK;             /*!< Host All Channels Interrupt Mask 418h*/
-} USB_OTG_HostTypeDef;
-
-/** 
-  * @brief __Host_Channel_Specific_Registers
-  */
-
-typedef struct
-{
-  __IO uint32_t HCCHAR;
-  __IO uint32_t HCSPLT;
-  __IO uint32_t HCINT;
-  __IO uint32_t HCINTMSK;
-  __IO uint32_t HCTSIZ;
-  __IO uint32_t HCDMA;
-  uint32_t Reserved[2];
-} USB_OTG_HostChannelTypeDef;
-
-/*!< USB registers base address */
-#define USB_OTG_FS_PERIPH_BASE               0x50000000UL
-
-// #define USB_OTG_GLOBAL_BASE                  0x00000000UL
-// #define USB_OTG_DEVICE_BASE                  0x00000800UL
-#define USB_OTG_IN_ENDPOINT_BASE             0x00000900UL
-#define USB_OTG_OUT_ENDPOINT_BASE            0x00000B00UL
-#define USB_OTG_EP_REG_SIZE                  0x00000020UL
-// #define USB_OTG_HOST_BASE                    0x00000400UL
-#define USB_OTG_HOST_PORT_BASE               0x00000440UL
-#define USB_OTG_HOST_CHANNEL_BASE            0x00000500UL
-#define USB_OTG_HOST_CHANNEL_SIZE            0x00000020UL
-#define USB_OTG_PCGCCTL_BASE                 0x00000E00UL
-#define USB_OTG_FIFO_BASE                    0x00001000UL
-#define USB_OTG_FIFO_SIZE                    0x00001000UL
-
-/******************************************************************************/
-/*                                                                            */
-/*                                 USB_OTG                                    */
-/*                                                                            */
-/******************************************************************************/
-/********************  Bit definition for USB_OTG_GOTGCTL register  ***********/
-#define USB_OTG_GOTGCTL_SRQSCS_Pos              (0U)                           
-#define USB_OTG_GOTGCTL_SRQSCS_Msk              (0x1UL << USB_OTG_GOTGCTL_SRQSCS_Pos) /*!< 0x00000001 */
-#define USB_OTG_GOTGCTL_SRQSCS                  USB_OTG_GOTGCTL_SRQSCS_Msk     /*!< Session request success */
-#define USB_OTG_GOTGCTL_SRQ_Pos                 (1U)                           
-#define USB_OTG_GOTGCTL_SRQ_Msk                 (0x1UL << USB_OTG_GOTGCTL_SRQ_Pos) /*!< 0x00000002 */
-#define USB_OTG_GOTGCTL_SRQ                     USB_OTG_GOTGCTL_SRQ_Msk        /*!< Session request */
-#define USB_OTG_GOTGCTL_HNGSCS_Pos              (8U)                           
-#define USB_OTG_GOTGCTL_HNGSCS_Msk              (0x1UL << USB_OTG_GOTGCTL_HNGSCS_Pos) /*!< 0x00000100 */
-#define USB_OTG_GOTGCTL_HNGSCS                   USB_OTG_GOTGCTL_HNGSCS_Msk    /*!< Host set HNP enable */
-#define USB_OTG_GOTGCTL_HNPRQ_Pos               (9U)                           
-#define USB_OTG_GOTGCTL_HNPRQ_Msk               (0x1UL << USB_OTG_GOTGCTL_HNPRQ_Pos) /*!< 0x00000200 */
-#define USB_OTG_GOTGCTL_HNPRQ                   USB_OTG_GOTGCTL_HNPRQ_Msk      /*!< HNP request */
-#define USB_OTG_GOTGCTL_HSHNPEN_Pos             (10U)                          
-#define USB_OTG_GOTGCTL_HSHNPEN_Msk             (0x1UL << USB_OTG_GOTGCTL_HSHNPEN_Pos) /*!< 0x00000400 */
-#define USB_OTG_GOTGCTL_HSHNPEN                 USB_OTG_GOTGCTL_HSHNPEN_Msk    /*!< Host set HNP enable */
-#define USB_OTG_GOTGCTL_DHNPEN_Pos              (11U)                          
-#define USB_OTG_GOTGCTL_DHNPEN_Msk              (0x1UL << USB_OTG_GOTGCTL_DHNPEN_Pos) /*!< 0x00000800 */
-#define USB_OTG_GOTGCTL_DHNPEN                  USB_OTG_GOTGCTL_DHNPEN_Msk     /*!< Device HNP enabled */
-#define USB_OTG_GOTGCTL_CIDSTS_Pos              (16U)                          
-#define USB_OTG_GOTGCTL_CIDSTS_Msk              (0x1UL << USB_OTG_GOTGCTL_CIDSTS_Pos) /*!< 0x00010000 */
-#define USB_OTG_GOTGCTL_CIDSTS                  USB_OTG_GOTGCTL_CIDSTS_Msk     /*!< Connector ID status */
-#define USB_OTG_GOTGCTL_DBCT_Pos                (17U)                          
-#define USB_OTG_GOTGCTL_DBCT_Msk                (0x1UL << USB_OTG_GOTGCTL_DBCT_Pos) /*!< 0x00020000 */
-#define USB_OTG_GOTGCTL_DBCT                    USB_OTG_GOTGCTL_DBCT_Msk       /*!< Long/short debounce time */
-#define USB_OTG_GOTGCTL_ASVLD_Pos               (18U)                          
-#define USB_OTG_GOTGCTL_ASVLD_Msk               (0x1UL << USB_OTG_GOTGCTL_ASVLD_Pos) /*!< 0x00040000 */
-#define USB_OTG_GOTGCTL_ASVLD                   USB_OTG_GOTGCTL_ASVLD_Msk      /*!< A-session valid */
-#define USB_OTG_GOTGCTL_BSVLD_Pos               (19U)                          
-#define USB_OTG_GOTGCTL_BSVLD_Msk               (0x1UL << USB_OTG_GOTGCTL_BSVLD_Pos) /*!< 0x00080000 */
-#define USB_OTG_GOTGCTL_BSVLD                   USB_OTG_GOTGCTL_BSVLD_Msk      /*!< B-session valid */
-
-/********************  Bit definition for USB_OTG_HCFG register  ********************/
-
-#define USB_OTG_HCFG_FSLSPCS_Pos                (0U)                           
-#define USB_OTG_HCFG_FSLSPCS_Msk                (0x3UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000003 */
-#define USB_OTG_HCFG_FSLSPCS                    USB_OTG_HCFG_FSLSPCS_Msk       /*!< FS/LS PHY clock select */
-#define USB_OTG_HCFG_FSLSPCS_0                  (0x1UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000001 */
-#define USB_OTG_HCFG_FSLSPCS_1                  (0x2UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000002 */
-#define USB_OTG_HCFG_FSLSS_Pos                  (2U)                           
-#define USB_OTG_HCFG_FSLSS_Msk                  (0x1UL << USB_OTG_HCFG_FSLSS_Pos) /*!< 0x00000004 */
-#define USB_OTG_HCFG_FSLSS                      USB_OTG_HCFG_FSLSS_Msk         /*!< FS- and LS-only support */
-
-/********************  Bit definition for USB_OTG_DCFG register  ********************/
-
-#define USB_OTG_DCFG_DSPD_Pos                   (0U)                           
-#define USB_OTG_DCFG_DSPD_Msk                   (0x3UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000003 */
-#define USB_OTG_DCFG_DSPD                       USB_OTG_DCFG_DSPD_Msk          /*!< Device speed */
-#define USB_OTG_DCFG_DSPD_0                     (0x1UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000001 */
-#define USB_OTG_DCFG_DSPD_1                     (0x2UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000002 */
-#define USB_OTG_DCFG_NZLSOHSK_Pos               (2U)                           
-#define USB_OTG_DCFG_NZLSOHSK_Msk               (0x1UL << USB_OTG_DCFG_NZLSOHSK_Pos) /*!< 0x00000004 */
-#define USB_OTG_DCFG_NZLSOHSK                   USB_OTG_DCFG_NZLSOHSK_Msk      /*!< Nonzero-length status OUT handshake */
-
-#define USB_OTG_DCFG_DAD_Pos                    (4U)                           
-#define USB_OTG_DCFG_DAD_Msk                    (0x7FUL << USB_OTG_DCFG_DAD_Pos) /*!< 0x000007F0 */
-#define USB_OTG_DCFG_DAD                        USB_OTG_DCFG_DAD_Msk           /*!< Device address */
-#define USB_OTG_DCFG_DAD_0                      (0x01UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000010 */
-#define USB_OTG_DCFG_DAD_1                      (0x02UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000020 */
-#define USB_OTG_DCFG_DAD_2                      (0x04UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000040 */
-#define USB_OTG_DCFG_DAD_3                      (0x08UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000080 */
-#define USB_OTG_DCFG_DAD_4                      (0x10UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000100 */
-#define USB_OTG_DCFG_DAD_5                      (0x20UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000200 */
-#define USB_OTG_DCFG_DAD_6                      (0x40UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000400 */
-
-#define USB_OTG_DCFG_PFIVL_Pos                  (11U)                          
-#define USB_OTG_DCFG_PFIVL_Msk                  (0x3UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001800 */
-#define USB_OTG_DCFG_PFIVL                      USB_OTG_DCFG_PFIVL_Msk         /*!< Periodic (micro)frame interval */
-#define USB_OTG_DCFG_PFIVL_0                    (0x1UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00000800 */
-#define USB_OTG_DCFG_PFIVL_1                    (0x2UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001000 */
-
-#define USB_OTG_DCFG_PERSCHIVL_Pos              (24U)                          
-#define USB_OTG_DCFG_PERSCHIVL_Msk              (0x3UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x03000000 */
-#define USB_OTG_DCFG_PERSCHIVL                  USB_OTG_DCFG_PERSCHIVL_Msk     /*!< Periodic scheduling interval */
-#define USB_OTG_DCFG_PERSCHIVL_0                (0x1UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x01000000 */
-#define USB_OTG_DCFG_PERSCHIVL_1                (0x2UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x02000000 */
-
-/********************  Bit definition for USB_OTG_PCGCR register  ********************/
-#define USB_OTG_PCGCR_STPPCLK_Pos               (0U)                           
-#define USB_OTG_PCGCR_STPPCLK_Msk               (0x1UL << USB_OTG_PCGCR_STPPCLK_Pos) /*!< 0x00000001 */
-#define USB_OTG_PCGCR_STPPCLK                   USB_OTG_PCGCR_STPPCLK_Msk      /*!< Stop PHY clock */
-#define USB_OTG_PCGCR_GATEHCLK_Pos              (1U)                           
-#define USB_OTG_PCGCR_GATEHCLK_Msk              (0x1UL << USB_OTG_PCGCR_GATEHCLK_Pos) /*!< 0x00000002 */
-#define USB_OTG_PCGCR_GATEHCLK                  USB_OTG_PCGCR_GATEHCLK_Msk     /*!< Gate HCLK */
-#define USB_OTG_PCGCR_PHYSUSP_Pos               (4U)                           
-#define USB_OTG_PCGCR_PHYSUSP_Msk               (0x1UL << USB_OTG_PCGCR_PHYSUSP_Pos) /*!< 0x00000010 */
-#define USB_OTG_PCGCR_PHYSUSP                   USB_OTG_PCGCR_PHYSUSP_Msk      /*!< PHY suspended */
-
-/********************  Bit definition for USB_OTG_GOTGINT register  ********************/
-#define USB_OTG_GOTGINT_SEDET_Pos               (2U)                           
-#define USB_OTG_GOTGINT_SEDET_Msk               (0x1UL << USB_OTG_GOTGINT_SEDET_Pos) /*!< 0x00000004 */
-#define USB_OTG_GOTGINT_SEDET                   USB_OTG_GOTGINT_SEDET_Msk      /*!< Session end detected */
-#define USB_OTG_GOTGINT_SRSSCHG_Pos             (8U)                           
-#define USB_OTG_GOTGINT_SRSSCHG_Msk             (0x1UL << USB_OTG_GOTGINT_SRSSCHG_Pos) /*!< 0x00000100 */
-#define USB_OTG_GOTGINT_SRSSCHG                 USB_OTG_GOTGINT_SRSSCHG_Msk    /*!< Session request success status change */
-#define USB_OTG_GOTGINT_HNSSCHG_Pos             (9U)                           
-#define USB_OTG_GOTGINT_HNSSCHG_Msk             (0x1UL << USB_OTG_GOTGINT_HNSSCHG_Pos) /*!< 0x00000200 */
-#define USB_OTG_GOTGINT_HNSSCHG                 USB_OTG_GOTGINT_HNSSCHG_Msk    /*!< Host negotiation success status change */
-#define USB_OTG_GOTGINT_HNGDET_Pos              (17U)                          
-#define USB_OTG_GOTGINT_HNGDET_Msk              (0x1UL << USB_OTG_GOTGINT_HNGDET_Pos) /*!< 0x00020000 */
-#define USB_OTG_GOTGINT_HNGDET                  USB_OTG_GOTGINT_HNGDET_Msk     /*!< Host negotiation detected */
-#define USB_OTG_GOTGINT_ADTOCHG_Pos             (18U)                          
-#define USB_OTG_GOTGINT_ADTOCHG_Msk             (0x1UL << USB_OTG_GOTGINT_ADTOCHG_Pos) /*!< 0x00040000 */
-#define USB_OTG_GOTGINT_ADTOCHG                 USB_OTG_GOTGINT_ADTOCHG_Msk    /*!< A-device timeout change */
-#define USB_OTG_GOTGINT_DBCDNE_Pos              (19U)                          
-#define USB_OTG_GOTGINT_DBCDNE_Msk              (0x1UL << USB_OTG_GOTGINT_DBCDNE_Pos) /*!< 0x00080000 */
-#define USB_OTG_GOTGINT_DBCDNE                  USB_OTG_GOTGINT_DBCDNE_Msk     /*!< Debounce done */
-
-/********************  Bit definition for USB_OTG_DCTL register  ********************/
-#define USB_OTG_DCTL_RWUSIG_Pos                 (0U)                           
-#define USB_OTG_DCTL_RWUSIG_Msk                 (0x1UL << USB_OTG_DCTL_RWUSIG_Pos) /*!< 0x00000001 */
-#define USB_OTG_DCTL_RWUSIG                     USB_OTG_DCTL_RWUSIG_Msk        /*!< Remote wakeup signaling */
-#define USB_OTG_DCTL_SDIS_Pos                   (1U)                           
-#define USB_OTG_DCTL_SDIS_Msk                   (0x1UL << USB_OTG_DCTL_SDIS_Pos) /*!< 0x00000002 */
-#define USB_OTG_DCTL_SDIS                       USB_OTG_DCTL_SDIS_Msk          /*!< Soft disconnect */
-#define USB_OTG_DCTL_GINSTS_Pos                 (2U)                           
-#define USB_OTG_DCTL_GINSTS_Msk                 (0x1UL << USB_OTG_DCTL_GINSTS_Pos) /*!< 0x00000004 */
-#define USB_OTG_DCTL_GINSTS                     USB_OTG_DCTL_GINSTS_Msk        /*!< Global IN NAK status */
-#define USB_OTG_DCTL_GONSTS_Pos                 (3U)                           
-#define USB_OTG_DCTL_GONSTS_Msk                 (0x1UL << USB_OTG_DCTL_GONSTS_Pos) /*!< 0x00000008 */
-#define USB_OTG_DCTL_GONSTS                     USB_OTG_DCTL_GONSTS_Msk        /*!< Global OUT NAK status */
-
-#define USB_OTG_DCTL_TCTL_Pos                   (4U)                           
-#define USB_OTG_DCTL_TCTL_Msk                   (0x7UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000070 */
-#define USB_OTG_DCTL_TCTL                       USB_OTG_DCTL_TCTL_Msk          /*!< Test control */
-#define USB_OTG_DCTL_TCTL_0                     (0x1UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000010 */
-#define USB_OTG_DCTL_TCTL_1                     (0x2UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000020 */
-#define USB_OTG_DCTL_TCTL_2                     (0x4UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000040 */
-#define USB_OTG_DCTL_SGINAK_Pos                 (7U)                           
-#define USB_OTG_DCTL_SGINAK_Msk                 (0x1UL << USB_OTG_DCTL_SGINAK_Pos) /*!< 0x00000080 */
-#define USB_OTG_DCTL_SGINAK                     USB_OTG_DCTL_SGINAK_Msk        /*!< Set global IN NAK */
-#define USB_OTG_DCTL_CGINAK_Pos                 (8U)                           
-#define USB_OTG_DCTL_CGINAK_Msk                 (0x1UL << USB_OTG_DCTL_CGINAK_Pos) /*!< 0x00000100 */
-#define USB_OTG_DCTL_CGINAK                     USB_OTG_DCTL_CGINAK_Msk        /*!< Clear global IN NAK */
-#define USB_OTG_DCTL_SGONAK_Pos                 (9U)                           
-#define USB_OTG_DCTL_SGONAK_Msk                 (0x1UL << USB_OTG_DCTL_SGONAK_Pos) /*!< 0x00000200 */
-#define USB_OTG_DCTL_SGONAK                     USB_OTG_DCTL_SGONAK_Msk        /*!< Set global OUT NAK */
-#define USB_OTG_DCTL_CGONAK_Pos                 (10U)                          
-#define USB_OTG_DCTL_CGONAK_Msk                 (0x1UL << USB_OTG_DCTL_CGONAK_Pos) /*!< 0x00000400 */
-#define USB_OTG_DCTL_CGONAK                     USB_OTG_DCTL_CGONAK_Msk        /*!< Clear global OUT NAK */
-#define USB_OTG_DCTL_POPRGDNE_Pos               (11U)                          
-#define USB_OTG_DCTL_POPRGDNE_Msk               (0x1UL << USB_OTG_DCTL_POPRGDNE_Pos) /*!< 0x00000800 */
-#define USB_OTG_DCTL_POPRGDNE                   USB_OTG_DCTL_POPRGDNE_Msk      /*!< Power-on programming done */
-
-/********************  Bit definition for USB_OTG_HFIR register  ********************/
-#define USB_OTG_HFIR_FRIVL_Pos                  (0U)                           
-#define USB_OTG_HFIR_FRIVL_Msk                  (0xFFFFUL << USB_OTG_HFIR_FRIVL_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_HFIR_FRIVL                      USB_OTG_HFIR_FRIVL_Msk         /*!< Frame interval */
-
-/********************  Bit definition for USB_OTG_HFNUM register  ********************/
-#define USB_OTG_HFNUM_FRNUM_Pos                 (0U)                           
-#define USB_OTG_HFNUM_FRNUM_Msk                 (0xFFFFUL << USB_OTG_HFNUM_FRNUM_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_HFNUM_FRNUM                     USB_OTG_HFNUM_FRNUM_Msk        /*!< Frame number */
-#define USB_OTG_HFNUM_FTREM_Pos                 (16U)                          
-#define USB_OTG_HFNUM_FTREM_Msk                 (0xFFFFUL << USB_OTG_HFNUM_FTREM_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_HFNUM_FTREM                     USB_OTG_HFNUM_FTREM_Msk        /*!< Frame time remaining */
-
-/********************  Bit definition for USB_OTG_DSTS register  ********************/
-#define USB_OTG_DSTS_SUSPSTS_Pos                (0U)                           
-#define USB_OTG_DSTS_SUSPSTS_Msk                (0x1UL << USB_OTG_DSTS_SUSPSTS_Pos) /*!< 0x00000001 */
-#define USB_OTG_DSTS_SUSPSTS                    USB_OTG_DSTS_SUSPSTS_Msk       /*!< Suspend status */
-
-#define USB_OTG_DSTS_ENUMSPD_Pos                (1U)                           
-#define USB_OTG_DSTS_ENUMSPD_Msk                (0x3UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000006 */
-#define USB_OTG_DSTS_ENUMSPD                    USB_OTG_DSTS_ENUMSPD_Msk       /*!< Enumerated speed */
-#define USB_OTG_DSTS_ENUMSPD_0                  (0x1UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000002 */
-#define USB_OTG_DSTS_ENUMSPD_1                  (0x2UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000004 */
-#define USB_OTG_DSTS_EERR_Pos                   (3U)                           
-#define USB_OTG_DSTS_EERR_Msk                   (0x1UL << USB_OTG_DSTS_EERR_Pos) /*!< 0x00000008 */
-#define USB_OTG_DSTS_EERR                       USB_OTG_DSTS_EERR_Msk          /*!< Erratic error */
-#define USB_OTG_DSTS_FNSOF_Pos                  (8U)                           
-#define USB_OTG_DSTS_FNSOF_Msk                  (0x3FFFUL << USB_OTG_DSTS_FNSOF_Pos) /*!< 0x003FFF00 */
-#define USB_OTG_DSTS_FNSOF                      USB_OTG_DSTS_FNSOF_Msk         /*!< Frame number of the received SOF */
-
-/********************  Bit definition for USB_OTG_GAHBCFG register  ********************/
-#define USB_OTG_GAHBCFG_GINT_Pos                (0U)                           
-#define USB_OTG_GAHBCFG_GINT_Msk                (0x1UL << USB_OTG_GAHBCFG_GINT_Pos) /*!< 0x00000001 */
-#define USB_OTG_GAHBCFG_GINT                    USB_OTG_GAHBCFG_GINT_Msk       /*!< Global interrupt mask */
-#define USB_OTG_GAHBCFG_HBSTLEN_Pos             (1U)                           
-#define USB_OTG_GAHBCFG_HBSTLEN_Msk             (0xFUL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< 0x0000001E */
-#define USB_OTG_GAHBCFG_HBSTLEN                 USB_OTG_GAHBCFG_HBSTLEN_Msk    /*!< Burst length/type */
-#define USB_OTG_GAHBCFG_HBSTLEN_0                (0x0UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< Single */
-#define USB_OTG_GAHBCFG_HBSTLEN_1                (0x1UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR */
-#define USB_OTG_GAHBCFG_HBSTLEN_2                (0x3UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR4 */
-#define USB_OTG_GAHBCFG_HBSTLEN_3                (0x5UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR8 */
-#define USB_OTG_GAHBCFG_HBSTLEN_4                (0x7UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR16 */
-#define USB_OTG_GAHBCFG_DMAEN_Pos               (5U)                           
-#define USB_OTG_GAHBCFG_DMAEN_Msk               (0x1UL << USB_OTG_GAHBCFG_DMAEN_Pos) /*!< 0x00000020 */
-#define USB_OTG_GAHBCFG_DMAEN                   USB_OTG_GAHBCFG_DMAEN_Msk      /*!< DMA enable */
-#define USB_OTG_GAHBCFG_TXFELVL_Pos             (7U)                           
-#define USB_OTG_GAHBCFG_TXFELVL_Msk             (0x1UL << USB_OTG_GAHBCFG_TXFELVL_Pos) /*!< 0x00000080 */
-#define USB_OTG_GAHBCFG_TXFELVL                 USB_OTG_GAHBCFG_TXFELVL_Msk    /*!< TxFIFO empty level */
-#define USB_OTG_GAHBCFG_PTXFELVL_Pos            (8U)                           
-#define USB_OTG_GAHBCFG_PTXFELVL_Msk            (0x1UL << USB_OTG_GAHBCFG_PTXFELVL_Pos) /*!< 0x00000100 */
-#define USB_OTG_GAHBCFG_PTXFELVL                USB_OTG_GAHBCFG_PTXFELVL_Msk   /*!< Periodic TxFIFO empty level */
-
-/********************  Bit definition for USB_OTG_GUSBCFG register  ********************/
-
-#define USB_OTG_GUSBCFG_TOCAL_Pos               (0U)                           
-#define USB_OTG_GUSBCFG_TOCAL_Msk               (0x7UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000007 */
-#define USB_OTG_GUSBCFG_TOCAL                   USB_OTG_GUSBCFG_TOCAL_Msk      /*!< FS timeout calibration */
-#define USB_OTG_GUSBCFG_TOCAL_0                 (0x1UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000001 */
-#define USB_OTG_GUSBCFG_TOCAL_1                 (0x2UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000002 */
-#define USB_OTG_GUSBCFG_TOCAL_2                 (0x4UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000004 */
-#define USB_OTG_GUSBCFG_PHYSEL_Pos              (6U)                           
-#define USB_OTG_GUSBCFG_PHYSEL_Msk              (0x1UL << USB_OTG_GUSBCFG_PHYSEL_Pos) /*!< 0x00000040 */
-#define USB_OTG_GUSBCFG_PHYSEL                  USB_OTG_GUSBCFG_PHYSEL_Msk     /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
-#define USB_OTG_GUSBCFG_SRPCAP_Pos              (8U)                           
-#define USB_OTG_GUSBCFG_SRPCAP_Msk              (0x1UL << USB_OTG_GUSBCFG_SRPCAP_Pos) /*!< 0x00000100 */
-#define USB_OTG_GUSBCFG_SRPCAP                  USB_OTG_GUSBCFG_SRPCAP_Msk     /*!< SRP-capable */
-#define USB_OTG_GUSBCFG_HNPCAP_Pos              (9U)                           
-#define USB_OTG_GUSBCFG_HNPCAP_Msk              (0x1UL << USB_OTG_GUSBCFG_HNPCAP_Pos) /*!< 0x00000200 */
-#define USB_OTG_GUSBCFG_HNPCAP                  USB_OTG_GUSBCFG_HNPCAP_Msk     /*!< HNP-capable */
-#define USB_OTG_GUSBCFG_TRDT_Pos                (10U)                          
-#define USB_OTG_GUSBCFG_TRDT_Msk                (0xFUL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00003C00 */
-#define USB_OTG_GUSBCFG_TRDT                    USB_OTG_GUSBCFG_TRDT_Msk       /*!< USB turnaround time */
-#define USB_OTG_GUSBCFG_TRDT_0                  (0x1UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000400 */
-#define USB_OTG_GUSBCFG_TRDT_1                  (0x2UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000800 */
-#define USB_OTG_GUSBCFG_TRDT_2                  (0x4UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00001000 */
-#define USB_OTG_GUSBCFG_TRDT_3                  (0x8UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00002000 */
-#define USB_OTG_GUSBCFG_PHYLPCS_Pos             (15U)                          
-#define USB_OTG_GUSBCFG_PHYLPCS_Msk             (0x1UL << USB_OTG_GUSBCFG_PHYLPCS_Pos) /*!< 0x00008000 */
-#define USB_OTG_GUSBCFG_PHYLPCS                 USB_OTG_GUSBCFG_PHYLPCS_Msk    /*!< PHY Low-power clock select */
-#define USB_OTG_GUSBCFG_ULPIFSLS_Pos            (17U)                          
-#define USB_OTG_GUSBCFG_ULPIFSLS_Msk            (0x1UL << USB_OTG_GUSBCFG_ULPIFSLS_Pos) /*!< 0x00020000 */
-#define USB_OTG_GUSBCFG_ULPIFSLS                USB_OTG_GUSBCFG_ULPIFSLS_Msk   /*!< ULPI FS/LS select */
-#define USB_OTG_GUSBCFG_ULPIAR_Pos              (18U)                          
-#define USB_OTG_GUSBCFG_ULPIAR_Msk              (0x1UL << USB_OTG_GUSBCFG_ULPIAR_Pos) /*!< 0x00040000 */
-#define USB_OTG_GUSBCFG_ULPIAR                  USB_OTG_GUSBCFG_ULPIAR_Msk     /*!< ULPI Auto-resume */
-#define USB_OTG_GUSBCFG_ULPICSM_Pos             (19U)                          
-#define USB_OTG_GUSBCFG_ULPICSM_Msk             (0x1UL << USB_OTG_GUSBCFG_ULPICSM_Pos) /*!< 0x00080000 */
-#define USB_OTG_GUSBCFG_ULPICSM                 USB_OTG_GUSBCFG_ULPICSM_Msk    /*!< ULPI Clock SuspendM */
-#define USB_OTG_GUSBCFG_ULPIEVBUSD_Pos          (20U)                          
-#define USB_OTG_GUSBCFG_ULPIEVBUSD_Msk          (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSD_Pos) /*!< 0x00100000 */
-#define USB_OTG_GUSBCFG_ULPIEVBUSD              USB_OTG_GUSBCFG_ULPIEVBUSD_Msk /*!< ULPI External VBUS Drive */
-#define USB_OTG_GUSBCFG_ULPIEVBUSI_Pos          (21U)                          
-#define USB_OTG_GUSBCFG_ULPIEVBUSI_Msk          (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSI_Pos) /*!< 0x00200000 */
-#define USB_OTG_GUSBCFG_ULPIEVBUSI              USB_OTG_GUSBCFG_ULPIEVBUSI_Msk /*!< ULPI external VBUS indicator */
-#define USB_OTG_GUSBCFG_TSDPS_Pos               (22U)                          
-#define USB_OTG_GUSBCFG_TSDPS_Msk               (0x1UL << USB_OTG_GUSBCFG_TSDPS_Pos) /*!< 0x00400000 */
-#define USB_OTG_GUSBCFG_TSDPS                   USB_OTG_GUSBCFG_TSDPS_Msk      /*!< TermSel DLine pulsing selection */
-#define USB_OTG_GUSBCFG_PCCI_Pos                (23U)                          
-#define USB_OTG_GUSBCFG_PCCI_Msk                (0x1UL << USB_OTG_GUSBCFG_PCCI_Pos) /*!< 0x00800000 */
-#define USB_OTG_GUSBCFG_PCCI                    USB_OTG_GUSBCFG_PCCI_Msk       /*!< Indicator complement */
-#define USB_OTG_GUSBCFG_PTCI_Pos                (24U)                          
-#define USB_OTG_GUSBCFG_PTCI_Msk                (0x1UL << USB_OTG_GUSBCFG_PTCI_Pos) /*!< 0x01000000 */
-#define USB_OTG_GUSBCFG_PTCI                    USB_OTG_GUSBCFG_PTCI_Msk       /*!< Indicator pass through */
-#define USB_OTG_GUSBCFG_ULPIIPD_Pos             (25U)                          
-#define USB_OTG_GUSBCFG_ULPIIPD_Msk             (0x1UL << USB_OTG_GUSBCFG_ULPIIPD_Pos) /*!< 0x02000000 */
-#define USB_OTG_GUSBCFG_ULPIIPD                 USB_OTG_GUSBCFG_ULPIIPD_Msk    /*!< ULPI interface protect disable */
-#define USB_OTG_GUSBCFG_FHMOD_Pos               (29U)                          
-#define USB_OTG_GUSBCFG_FHMOD_Msk               (0x1UL << USB_OTG_GUSBCFG_FHMOD_Pos) /*!< 0x20000000 */
-#define USB_OTG_GUSBCFG_FHMOD                   USB_OTG_GUSBCFG_FHMOD_Msk      /*!< Forced host mode */
-#define USB_OTG_GUSBCFG_FDMOD_Pos               (30U)                          
-#define USB_OTG_GUSBCFG_FDMOD_Msk               (0x1UL << USB_OTG_GUSBCFG_FDMOD_Pos) /*!< 0x40000000 */
-#define USB_OTG_GUSBCFG_FDMOD                   USB_OTG_GUSBCFG_FDMOD_Msk      /*!< Forced peripheral mode */
-#define USB_OTG_GUSBCFG_CTXPKT_Pos              (31U)                          
-#define USB_OTG_GUSBCFG_CTXPKT_Msk              (0x1UL << USB_OTG_GUSBCFG_CTXPKT_Pos) /*!< 0x80000000 */
-#define USB_OTG_GUSBCFG_CTXPKT                  USB_OTG_GUSBCFG_CTXPKT_Msk     /*!< Corrupt Tx packet */
-
-/********************  Bit definition for USB_OTG_GRSTCTL register  ********************/
-#define USB_OTG_GRSTCTL_CSRST_Pos               (0U)                           
-#define USB_OTG_GRSTCTL_CSRST_Msk               (0x1UL << USB_OTG_GRSTCTL_CSRST_Pos) /*!< 0x00000001 */
-#define USB_OTG_GRSTCTL_CSRST                   USB_OTG_GRSTCTL_CSRST_Msk      /*!< Core soft reset */
-#define USB_OTG_GRSTCTL_HSRST_Pos               (1U)                           
-#define USB_OTG_GRSTCTL_HSRST_Msk               (0x1UL << USB_OTG_GRSTCTL_HSRST_Pos) /*!< 0x00000002 */
-#define USB_OTG_GRSTCTL_HSRST                   USB_OTG_GRSTCTL_HSRST_Msk      /*!< HCLK soft reset */
-#define USB_OTG_GRSTCTL_FCRST_Pos               (2U)                           
-#define USB_OTG_GRSTCTL_FCRST_Msk               (0x1UL << USB_OTG_GRSTCTL_FCRST_Pos) /*!< 0x00000004 */
-#define USB_OTG_GRSTCTL_FCRST                   USB_OTG_GRSTCTL_FCRST_Msk      /*!< Host frame counter reset */
-#define USB_OTG_GRSTCTL_RXFFLSH_Pos             (4U)                           
-#define USB_OTG_GRSTCTL_RXFFLSH_Msk             (0x1UL << USB_OTG_GRSTCTL_RXFFLSH_Pos) /*!< 0x00000010 */
-#define USB_OTG_GRSTCTL_RXFFLSH                 USB_OTG_GRSTCTL_RXFFLSH_Msk    /*!< RxFIFO flush */
-#define USB_OTG_GRSTCTL_TXFFLSH_Pos             (5U)                           
-#define USB_OTG_GRSTCTL_TXFFLSH_Msk             (0x1UL << USB_OTG_GRSTCTL_TXFFLSH_Pos) /*!< 0x00000020 */
-#define USB_OTG_GRSTCTL_TXFFLSH                 USB_OTG_GRSTCTL_TXFFLSH_Msk    /*!< TxFIFO flush */
-
-
-#define USB_OTG_GRSTCTL_TXFNUM_Pos              (6U)                           
-#define USB_OTG_GRSTCTL_TXFNUM_Msk              (0x1FUL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x000007C0 */
-#define USB_OTG_GRSTCTL_TXFNUM                  USB_OTG_GRSTCTL_TXFNUM_Msk     /*!< TxFIFO number */
-#define USB_OTG_GRSTCTL_TXFNUM_0                (0x01UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000040 */
-#define USB_OTG_GRSTCTL_TXFNUM_1                (0x02UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000080 */
-#define USB_OTG_GRSTCTL_TXFNUM_2                (0x04UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000100 */
-#define USB_OTG_GRSTCTL_TXFNUM_3                (0x08UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000200 */
-#define USB_OTG_GRSTCTL_TXFNUM_4                (0x10UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000400 */
-#define USB_OTG_GRSTCTL_DMAREQ_Pos              (30U)                          
-#define USB_OTG_GRSTCTL_DMAREQ_Msk              (0x1UL << USB_OTG_GRSTCTL_DMAREQ_Pos) /*!< 0x40000000 */
-#define USB_OTG_GRSTCTL_DMAREQ                  USB_OTG_GRSTCTL_DMAREQ_Msk     /*!< DMA request signal */
-#define USB_OTG_GRSTCTL_AHBIDL_Pos              (31U)                          
-#define USB_OTG_GRSTCTL_AHBIDL_Msk              (0x1UL << USB_OTG_GRSTCTL_AHBIDL_Pos) /*!< 0x80000000 */
-#define USB_OTG_GRSTCTL_AHBIDL                  USB_OTG_GRSTCTL_AHBIDL_Msk     /*!< AHB master idle */
-
-/********************  Bit definition for USB_OTG_DIEPMSK register  ********************/
-#define USB_OTG_DIEPMSK_XFRCM_Pos               (0U)                           
-#define USB_OTG_DIEPMSK_XFRCM_Msk               (0x1UL << USB_OTG_DIEPMSK_XFRCM_Pos) /*!< 0x00000001 */
-#define USB_OTG_DIEPMSK_XFRCM                   USB_OTG_DIEPMSK_XFRCM_Msk      /*!< Transfer completed interrupt mask */
-#define USB_OTG_DIEPMSK_EPDM_Pos                (1U)                           
-#define USB_OTG_DIEPMSK_EPDM_Msk                (0x1UL << USB_OTG_DIEPMSK_EPDM_Pos) /*!< 0x00000002 */
-#define USB_OTG_DIEPMSK_EPDM                    USB_OTG_DIEPMSK_EPDM_Msk       /*!< Endpoint disabled interrupt mask */
-#define USB_OTG_DIEPMSK_TOM_Pos                 (3U)                           
-#define USB_OTG_DIEPMSK_TOM_Msk                 (0x1UL << USB_OTG_DIEPMSK_TOM_Pos) /*!< 0x00000008 */
-#define USB_OTG_DIEPMSK_TOM                     USB_OTG_DIEPMSK_TOM_Msk        /*!< Timeout condition mask (nonisochronous endpoints) */
-#define USB_OTG_DIEPMSK_ITTXFEMSK_Pos           (4U)                           
-#define USB_OTG_DIEPMSK_ITTXFEMSK_Msk           (0x1UL << USB_OTG_DIEPMSK_ITTXFEMSK_Pos) /*!< 0x00000010 */
-#define USB_OTG_DIEPMSK_ITTXFEMSK               USB_OTG_DIEPMSK_ITTXFEMSK_Msk  /*!< IN token received when TxFIFO empty mask */
-#define USB_OTG_DIEPMSK_INEPNMM_Pos             (5U)                           
-#define USB_OTG_DIEPMSK_INEPNMM_Msk             (0x1UL << USB_OTG_DIEPMSK_INEPNMM_Pos) /*!< 0x00000020 */
-#define USB_OTG_DIEPMSK_INEPNMM                 USB_OTG_DIEPMSK_INEPNMM_Msk    /*!< IN token received with EP mismatch mask */
-#define USB_OTG_DIEPMSK_INEPNEM_Pos             (6U)                           
-#define USB_OTG_DIEPMSK_INEPNEM_Msk             (0x1UL << USB_OTG_DIEPMSK_INEPNEM_Pos) /*!< 0x00000040 */
-#define USB_OTG_DIEPMSK_INEPNEM                 USB_OTG_DIEPMSK_INEPNEM_Msk    /*!< IN endpoint NAK effective mask */
-#define USB_OTG_DIEPMSK_TXFURM_Pos              (8U)                           
-#define USB_OTG_DIEPMSK_TXFURM_Msk              (0x1UL << USB_OTG_DIEPMSK_TXFURM_Pos) /*!< 0x00000100 */
-#define USB_OTG_DIEPMSK_TXFURM                  USB_OTG_DIEPMSK_TXFURM_Msk     /*!< FIFO underrun mask */
-#define USB_OTG_DIEPMSK_BIM_Pos                 (9U)                           
-#define USB_OTG_DIEPMSK_BIM_Msk                 (0x1UL << USB_OTG_DIEPMSK_BIM_Pos) /*!< 0x00000200 */
-#define USB_OTG_DIEPMSK_BIM                     USB_OTG_DIEPMSK_BIM_Msk        /*!< BNA interrupt mask */
-
-/********************  Bit definition for USB_OTG_HPTXSTS register  ********************/
-#define USB_OTG_HPTXSTS_PTXFSAVL_Pos            (0U)                           
-#define USB_OTG_HPTXSTS_PTXFSAVL_Msk            (0xFFFFUL << USB_OTG_HPTXSTS_PTXFSAVL_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_HPTXSTS_PTXFSAVL                USB_OTG_HPTXSTS_PTXFSAVL_Msk   /*!< Periodic transmit data FIFO space available */
-#define USB_OTG_HPTXSTS_PTXQSAV_Pos             (16U)                          
-#define USB_OTG_HPTXSTS_PTXQSAV_Msk             (0xFFUL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00FF0000 */
-#define USB_OTG_HPTXSTS_PTXQSAV                 USB_OTG_HPTXSTS_PTXQSAV_Msk    /*!< Periodic transmit request queue space available */
-#define USB_OTG_HPTXSTS_PTXQSAV_0               (0x01UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00010000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_1               (0x02UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00020000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_2               (0x04UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00040000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_3               (0x08UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00080000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_4               (0x10UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00100000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_5               (0x20UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00200000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_6               (0x40UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00400000 */
-#define USB_OTG_HPTXSTS_PTXQSAV_7               (0x80UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00800000 */
-
-#define USB_OTG_HPTXSTS_PTXQTOP_Pos             (24U)                          
-#define USB_OTG_HPTXSTS_PTXQTOP_Msk             (0xFFUL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0xFF000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP                 USB_OTG_HPTXSTS_PTXQTOP_Msk    /*!< Top of the periodic transmit request queue */
-#define USB_OTG_HPTXSTS_PTXQTOP_0               (0x01UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x01000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_1               (0x02UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x02000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_2               (0x04UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x04000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_3               (0x08UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x08000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_4               (0x10UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x10000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_5               (0x20UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x20000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_6               (0x40UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x40000000 */
-#define USB_OTG_HPTXSTS_PTXQTOP_7               (0x80UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x80000000 */
-
-/********************  Bit definition for USB_OTG_HAINT register  ********************/
-#define USB_OTG_HAINT_HAINT_Pos                 (0U)                           
-#define USB_OTG_HAINT_HAINT_Msk                 (0xFFFFUL << USB_OTG_HAINT_HAINT_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_HAINT_HAINT                     USB_OTG_HAINT_HAINT_Msk        /*!< Channel interrupts */
-
-/********************  Bit definition for USB_OTG_DOEPMSK register  ********************/
-#define USB_OTG_DOEPMSK_XFRCM_Pos               (0U)                           
-#define USB_OTG_DOEPMSK_XFRCM_Msk               (0x1UL << USB_OTG_DOEPMSK_XFRCM_Pos) /*!< 0x00000001 */
-#define USB_OTG_DOEPMSK_XFRCM                   USB_OTG_DOEPMSK_XFRCM_Msk      /*!< Transfer completed interrupt mask */
-#define USB_OTG_DOEPMSK_EPDM_Pos                (1U)                           
-#define USB_OTG_DOEPMSK_EPDM_Msk                (0x1UL << USB_OTG_DOEPMSK_EPDM_Pos) /*!< 0x00000002 */
-#define USB_OTG_DOEPMSK_EPDM                    USB_OTG_DOEPMSK_EPDM_Msk       /*!< Endpoint disabled interrupt mask */
-#define USB_OTG_DOEPMSK_AHBERRM_Pos              (2U)
-#define USB_OTG_DOEPMSK_AHBERRM_Msk              (0x1UL << USB_OTG_DOEPMSK_AHBERRM_Pos) /*!< 0x00000004 */
-#define USB_OTG_DOEPMSK_AHBERRM                  USB_OTG_DOEPMSK_AHBERRM_Msk   /*!< OUT transaction AHB Error interrupt mask       */
-#define USB_OTG_DOEPMSK_STUPM_Pos               (3U)                           
-#define USB_OTG_DOEPMSK_STUPM_Msk               (0x1UL << USB_OTG_DOEPMSK_STUPM_Pos) /*!< 0x00000008 */
-#define USB_OTG_DOEPMSK_STUPM                   USB_OTG_DOEPMSK_STUPM_Msk      /*!< SETUP phase done mask */
-#define USB_OTG_DOEPMSK_OTEPDM_Pos              (4U)                           
-#define USB_OTG_DOEPMSK_OTEPDM_Msk              (0x1UL << USB_OTG_DOEPMSK_OTEPDM_Pos) /*!< 0x00000010 */
-#define USB_OTG_DOEPMSK_OTEPDM                  USB_OTG_DOEPMSK_OTEPDM_Msk     /*!< OUT token received when endpoint disabled mask */
-#define USB_OTG_DOEPMSK_OTEPSPRM_Pos             (5U)                          
-#define USB_OTG_DOEPMSK_OTEPSPRM_Msk             (0x1UL << USB_OTG_DOEPMSK_OTEPSPRM_Pos) /*!< 0x00000020 */
-#define USB_OTG_DOEPMSK_OTEPSPRM                 USB_OTG_DOEPMSK_OTEPSPRM_Msk  /*!< Status Phase Received mask                     */
-#define USB_OTG_DOEPMSK_B2BSTUP_Pos             (6U)                           
-#define USB_OTG_DOEPMSK_B2BSTUP_Msk             (0x1UL << USB_OTG_DOEPMSK_B2BSTUP_Pos) /*!< 0x00000040 */
-#define USB_OTG_DOEPMSK_B2BSTUP                 USB_OTG_DOEPMSK_B2BSTUP_Msk    /*!< Back-to-back SETUP packets received mask */
-#define USB_OTG_DOEPMSK_OPEM_Pos                (8U)                           
-#define USB_OTG_DOEPMSK_OPEM_Msk                (0x1UL << USB_OTG_DOEPMSK_OPEM_Pos) /*!< 0x00000100 */
-#define USB_OTG_DOEPMSK_OPEM                    USB_OTG_DOEPMSK_OPEM_Msk       /*!< OUT packet error mask */
-#define USB_OTG_DOEPMSK_BOIM_Pos                (9U)                           
-#define USB_OTG_DOEPMSK_BOIM_Msk                (0x1UL << USB_OTG_DOEPMSK_BOIM_Pos) /*!< 0x00000200 */
-#define USB_OTG_DOEPMSK_BOIM                    USB_OTG_DOEPMSK_BOIM_Msk       /*!< BNA interrupt mask */
-#define USB_OTG_DOEPMSK_BERRM_Pos                (12U)
-#define USB_OTG_DOEPMSK_BERRM_Msk                (0x1UL << USB_OTG_DOEPMSK_BERRM_Pos) /*!< 0x00001000 */
-#define USB_OTG_DOEPMSK_BERRM                    USB_OTG_DOEPMSK_BERRM_Msk      /*!< Babble error interrupt mask                   */
-#define USB_OTG_DOEPMSK_NAKM_Pos                 (13U)
-#define USB_OTG_DOEPMSK_NAKM_Msk                 (0x1UL << USB_OTG_DOEPMSK_NAKM_Pos) /*!< 0x00002000 */
-#define USB_OTG_DOEPMSK_NAKM                     USB_OTG_DOEPMSK_NAKM_Msk      /*!< OUT Packet NAK interrupt mask                  */
-#define USB_OTG_DOEPMSK_NYETM_Pos                (14U)
-#define USB_OTG_DOEPMSK_NYETM_Msk                (0x1UL << USB_OTG_DOEPMSK_NYETM_Pos) /*!< 0x00004000 */
-#define USB_OTG_DOEPMSK_NYETM                    USB_OTG_DOEPMSK_NYETM_Msk     /*!< NYET interrupt mask                            */
-/********************  Bit definition for USB_OTG_GINTSTS register  ********************/
-#define USB_OTG_GINTSTS_CMOD_Pos                (0U)                           
-#define USB_OTG_GINTSTS_CMOD_Msk                (0x1UL << USB_OTG_GINTSTS_CMOD_Pos) /*!< 0x00000001 */
-#define USB_OTG_GINTSTS_CMOD                    USB_OTG_GINTSTS_CMOD_Msk       /*!< Current mode of operation */
-#define USB_OTG_GINTSTS_MMIS_Pos                (1U)                           
-#define USB_OTG_GINTSTS_MMIS_Msk                (0x1UL << USB_OTG_GINTSTS_MMIS_Pos) /*!< 0x00000002 */
-#define USB_OTG_GINTSTS_MMIS                    USB_OTG_GINTSTS_MMIS_Msk       /*!< Mode mismatch interrupt */
-#define USB_OTG_GINTSTS_OTGINT_Pos              (2U)                           
-#define USB_OTG_GINTSTS_OTGINT_Msk              (0x1UL << USB_OTG_GINTSTS_OTGINT_Pos) /*!< 0x00000004 */
-#define USB_OTG_GINTSTS_OTGINT                  USB_OTG_GINTSTS_OTGINT_Msk     /*!< OTG interrupt */
-#define USB_OTG_GINTSTS_SOF_Pos                 (3U)                           
-#define USB_OTG_GINTSTS_SOF_Msk                 (0x1UL << USB_OTG_GINTSTS_SOF_Pos) /*!< 0x00000008 */
-#define USB_OTG_GINTSTS_SOF                     USB_OTG_GINTSTS_SOF_Msk        /*!< Start of frame */
-#define USB_OTG_GINTSTS_RXFLVL_Pos              (4U)                           
-#define USB_OTG_GINTSTS_RXFLVL_Msk              (0x1UL << USB_OTG_GINTSTS_RXFLVL_Pos) /*!< 0x00000010 */
-#define USB_OTG_GINTSTS_RXFLVL                  USB_OTG_GINTSTS_RXFLVL_Msk     /*!< RxFIFO nonempty */
-#define USB_OTG_GINTSTS_NPTXFE_Pos              (5U)                           
-#define USB_OTG_GINTSTS_NPTXFE_Msk              (0x1UL << USB_OTG_GINTSTS_NPTXFE_Pos) /*!< 0x00000020 */
-#define USB_OTG_GINTSTS_NPTXFE                  USB_OTG_GINTSTS_NPTXFE_Msk     /*!< Nonperiodic TxFIFO empty */
-#define USB_OTG_GINTSTS_GINAKEFF_Pos            (6U)                           
-#define USB_OTG_GINTSTS_GINAKEFF_Msk            (0x1UL << USB_OTG_GINTSTS_GINAKEFF_Pos) /*!< 0x00000040 */
-#define USB_OTG_GINTSTS_GINAKEFF                USB_OTG_GINTSTS_GINAKEFF_Msk   /*!< Global IN nonperiodic NAK effective */
-#define USB_OTG_GINTSTS_BOUTNAKEFF_Pos          (7U)                           
-#define USB_OTG_GINTSTS_BOUTNAKEFF_Msk          (0x1UL << USB_OTG_GINTSTS_BOUTNAKEFF_Pos) /*!< 0x00000080 */
-#define USB_OTG_GINTSTS_BOUTNAKEFF              USB_OTG_GINTSTS_BOUTNAKEFF_Msk /*!< Global OUT NAK effective */
-#define USB_OTG_GINTSTS_ESUSP_Pos               (10U)                          
-#define USB_OTG_GINTSTS_ESUSP_Msk               (0x1UL << USB_OTG_GINTSTS_ESUSP_Pos) /*!< 0x00000400 */
-#define USB_OTG_GINTSTS_ESUSP                   USB_OTG_GINTSTS_ESUSP_Msk      /*!< Early suspend */
-#define USB_OTG_GINTSTS_USBSUSP_Pos             (11U)                          
-#define USB_OTG_GINTSTS_USBSUSP_Msk             (0x1UL << USB_OTG_GINTSTS_USBSUSP_Pos) /*!< 0x00000800 */
-#define USB_OTG_GINTSTS_USBSUSP                 USB_OTG_GINTSTS_USBSUSP_Msk    /*!< USB suspend */
-#define USB_OTG_GINTSTS_USBRST_Pos              (12U)                          
-#define USB_OTG_GINTSTS_USBRST_Msk              (0x1UL << USB_OTG_GINTSTS_USBRST_Pos) /*!< 0x00001000 */
-#define USB_OTG_GINTSTS_USBRST                  USB_OTG_GINTSTS_USBRST_Msk     /*!< USB reset */
-#define USB_OTG_GINTSTS_ENUMDNE_Pos             (13U)                          
-#define USB_OTG_GINTSTS_ENUMDNE_Msk             (0x1UL << USB_OTG_GINTSTS_ENUMDNE_Pos) /*!< 0x00002000 */
-#define USB_OTG_GINTSTS_ENUMDNE                 USB_OTG_GINTSTS_ENUMDNE_Msk    /*!< Enumeration done */
-#define USB_OTG_GINTSTS_ISOODRP_Pos             (14U)                          
-#define USB_OTG_GINTSTS_ISOODRP_Msk             (0x1UL << USB_OTG_GINTSTS_ISOODRP_Pos) /*!< 0x00004000 */
-#define USB_OTG_GINTSTS_ISOODRP                 USB_OTG_GINTSTS_ISOODRP_Msk    /*!< Isochronous OUT packet dropped interrupt */
-#define USB_OTG_GINTSTS_EOPF_Pos                (15U)                          
-#define USB_OTG_GINTSTS_EOPF_Msk                (0x1UL << USB_OTG_GINTSTS_EOPF_Pos) /*!< 0x00008000 */
-#define USB_OTG_GINTSTS_EOPF                    USB_OTG_GINTSTS_EOPF_Msk       /*!< End of periodic frame interrupt */
-#define USB_OTG_GINTSTS_IEPINT_Pos              (18U)                          
-#define USB_OTG_GINTSTS_IEPINT_Msk              (0x1UL << USB_OTG_GINTSTS_IEPINT_Pos) /*!< 0x00040000 */
-#define USB_OTG_GINTSTS_IEPINT                  USB_OTG_GINTSTS_IEPINT_Msk     /*!< IN endpoint interrupt */
-#define USB_OTG_GINTSTS_OEPINT_Pos              (19U)                          
-#define USB_OTG_GINTSTS_OEPINT_Msk              (0x1UL << USB_OTG_GINTSTS_OEPINT_Pos) /*!< 0x00080000 */
-#define USB_OTG_GINTSTS_OEPINT                  USB_OTG_GINTSTS_OEPINT_Msk     /*!< OUT endpoint interrupt */
-#define USB_OTG_GINTSTS_IISOIXFR_Pos            (20U)                          
-#define USB_OTG_GINTSTS_IISOIXFR_Msk            (0x1UL << USB_OTG_GINTSTS_IISOIXFR_Pos) /*!< 0x00100000 */
-#define USB_OTG_GINTSTS_IISOIXFR                USB_OTG_GINTSTS_IISOIXFR_Msk   /*!< Incomplete isochronous IN transfer */
-#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos   (21U)                          
-#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk   (0x1UL << USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos) /*!< 0x00200000 */
-#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT       USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk /*!< Incomplete periodic transfer */
-#define USB_OTG_GINTSTS_DATAFSUSP_Pos           (22U)                          
-#define USB_OTG_GINTSTS_DATAFSUSP_Msk           (0x1UL << USB_OTG_GINTSTS_DATAFSUSP_Pos) /*!< 0x00400000 */
-#define USB_OTG_GINTSTS_DATAFSUSP               USB_OTG_GINTSTS_DATAFSUSP_Msk  /*!< Data fetch suspended */
-#define USB_OTG_GINTSTS_HPRTINT_Pos             (24U)                          
-#define USB_OTG_GINTSTS_HPRTINT_Msk             (0x1UL << USB_OTG_GINTSTS_HPRTINT_Pos) /*!< 0x01000000 */
-#define USB_OTG_GINTSTS_HPRTINT                 USB_OTG_GINTSTS_HPRTINT_Msk    /*!< Host port interrupt */
-#define USB_OTG_GINTSTS_HCINT_Pos               (25U)                          
-#define USB_OTG_GINTSTS_HCINT_Msk               (0x1UL << USB_OTG_GINTSTS_HCINT_Pos) /*!< 0x02000000 */
-#define USB_OTG_GINTSTS_HCINT                   USB_OTG_GINTSTS_HCINT_Msk      /*!< Host channels interrupt */
-#define USB_OTG_GINTSTS_PTXFE_Pos               (26U)                          
-#define USB_OTG_GINTSTS_PTXFE_Msk               (0x1UL << USB_OTG_GINTSTS_PTXFE_Pos) /*!< 0x04000000 */
-#define USB_OTG_GINTSTS_PTXFE                   USB_OTG_GINTSTS_PTXFE_Msk      /*!< Periodic TxFIFO empty */
-#define USB_OTG_GINTSTS_CIDSCHG_Pos             (28U)                          
-#define USB_OTG_GINTSTS_CIDSCHG_Msk             (0x1UL << USB_OTG_GINTSTS_CIDSCHG_Pos) /*!< 0x10000000 */
-#define USB_OTG_GINTSTS_CIDSCHG                 USB_OTG_GINTSTS_CIDSCHG_Msk    /*!< Connector ID status change */
-#define USB_OTG_GINTSTS_DISCINT_Pos             (29U)                          
-#define USB_OTG_GINTSTS_DISCINT_Msk             (0x1UL << USB_OTG_GINTSTS_DISCINT_Pos) /*!< 0x20000000 */
-#define USB_OTG_GINTSTS_DISCINT                 USB_OTG_GINTSTS_DISCINT_Msk    /*!< Disconnect detected interrupt */
-#define USB_OTG_GINTSTS_SRQINT_Pos              (30U)                          
-#define USB_OTG_GINTSTS_SRQINT_Msk              (0x1UL << USB_OTG_GINTSTS_SRQINT_Pos) /*!< 0x40000000 */
-#define USB_OTG_GINTSTS_SRQINT                  USB_OTG_GINTSTS_SRQINT_Msk     /*!< Session request/new session detected interrupt */
-#define USB_OTG_GINTSTS_WKUINT_Pos              (31U)                          
-#define USB_OTG_GINTSTS_WKUINT_Msk              (0x1UL << USB_OTG_GINTSTS_WKUINT_Pos) /*!< 0x80000000 */
-#define USB_OTG_GINTSTS_WKUINT                  USB_OTG_GINTSTS_WKUINT_Msk     /*!< Resume/remote wakeup detected interrupt */
-
-/********************  Bit definition for USB_OTG_GINTMSK register  ********************/
-#define USB_OTG_GINTMSK_MMISM_Pos               (1U)                           
-#define USB_OTG_GINTMSK_MMISM_Msk               (0x1UL << USB_OTG_GINTMSK_MMISM_Pos) /*!< 0x00000002 */
-#define USB_OTG_GINTMSK_MMISM                   USB_OTG_GINTMSK_MMISM_Msk      /*!< Mode mismatch interrupt mask */
-#define USB_OTG_GINTMSK_OTGINT_Pos              (2U)                           
-#define USB_OTG_GINTMSK_OTGINT_Msk              (0x1UL << USB_OTG_GINTMSK_OTGINT_Pos) /*!< 0x00000004 */
-#define USB_OTG_GINTMSK_OTGINT                  USB_OTG_GINTMSK_OTGINT_Msk     /*!< OTG interrupt mask */
-#define USB_OTG_GINTMSK_SOFM_Pos                (3U)                           
-#define USB_OTG_GINTMSK_SOFM_Msk                (0x1UL << USB_OTG_GINTMSK_SOFM_Pos) /*!< 0x00000008 */
-#define USB_OTG_GINTMSK_SOFM                    USB_OTG_GINTMSK_SOFM_Msk       /*!< Start of frame mask */
-#define USB_OTG_GINTMSK_RXFLVLM_Pos             (4U)                           
-#define USB_OTG_GINTMSK_RXFLVLM_Msk             (0x1UL << USB_OTG_GINTMSK_RXFLVLM_Pos) /*!< 0x00000010 */
-#define USB_OTG_GINTMSK_RXFLVLM                 USB_OTG_GINTMSK_RXFLVLM_Msk    /*!< Receive FIFO nonempty mask */
-#define USB_OTG_GINTMSK_NPTXFEM_Pos             (5U)                           
-#define USB_OTG_GINTMSK_NPTXFEM_Msk             (0x1UL << USB_OTG_GINTMSK_NPTXFEM_Pos) /*!< 0x00000020 */
-#define USB_OTG_GINTMSK_NPTXFEM                 USB_OTG_GINTMSK_NPTXFEM_Msk    /*!< Nonperiodic TxFIFO empty mask */
-#define USB_OTG_GINTMSK_GINAKEFFM_Pos           (6U)                           
-#define USB_OTG_GINTMSK_GINAKEFFM_Msk           (0x1UL << USB_OTG_GINTMSK_GINAKEFFM_Pos) /*!< 0x00000040 */
-#define USB_OTG_GINTMSK_GINAKEFFM               USB_OTG_GINTMSK_GINAKEFFM_Msk  /*!< Global nonperiodic IN NAK effective mask */
-#define USB_OTG_GINTMSK_GONAKEFFM_Pos           (7U)                           
-#define USB_OTG_GINTMSK_GONAKEFFM_Msk           (0x1UL << USB_OTG_GINTMSK_GONAKEFFM_Pos) /*!< 0x00000080 */
-#define USB_OTG_GINTMSK_GONAKEFFM               USB_OTG_GINTMSK_GONAKEFFM_Msk  /*!< Global OUT NAK effective mask */
-#define USB_OTG_GINTMSK_ESUSPM_Pos              (10U)                          
-#define USB_OTG_GINTMSK_ESUSPM_Msk              (0x1UL << USB_OTG_GINTMSK_ESUSPM_Pos) /*!< 0x00000400 */
-#define USB_OTG_GINTMSK_ESUSPM                  USB_OTG_GINTMSK_ESUSPM_Msk     /*!< Early suspend mask */
-#define USB_OTG_GINTMSK_USBSUSPM_Pos            (11U)                          
-#define USB_OTG_GINTMSK_USBSUSPM_Msk            (0x1UL << USB_OTG_GINTMSK_USBSUSPM_Pos) /*!< 0x00000800 */
-#define USB_OTG_GINTMSK_USBSUSPM                USB_OTG_GINTMSK_USBSUSPM_Msk   /*!< USB suspend mask */
-#define USB_OTG_GINTMSK_USBRST_Pos              (12U)                          
-#define USB_OTG_GINTMSK_USBRST_Msk              (0x1UL << USB_OTG_GINTMSK_USBRST_Pos) /*!< 0x00001000 */
-#define USB_OTG_GINTMSK_USBRST                  USB_OTG_GINTMSK_USBRST_Msk     /*!< USB reset mask */
-#define USB_OTG_GINTMSK_ENUMDNEM_Pos            (13U)                          
-#define USB_OTG_GINTMSK_ENUMDNEM_Msk            (0x1UL << USB_OTG_GINTMSK_ENUMDNEM_Pos) /*!< 0x00002000 */
-#define USB_OTG_GINTMSK_ENUMDNEM                USB_OTG_GINTMSK_ENUMDNEM_Msk   /*!< Enumeration done mask */
-#define USB_OTG_GINTMSK_ISOODRPM_Pos            (14U)                          
-#define USB_OTG_GINTMSK_ISOODRPM_Msk            (0x1UL << USB_OTG_GINTMSK_ISOODRPM_Pos) /*!< 0x00004000 */
-#define USB_OTG_GINTMSK_ISOODRPM                USB_OTG_GINTMSK_ISOODRPM_Msk   /*!< Isochronous OUT packet dropped interrupt mask */
-#define USB_OTG_GINTMSK_EOPFM_Pos               (15U)                          
-#define USB_OTG_GINTMSK_EOPFM_Msk               (0x1UL << USB_OTG_GINTMSK_EOPFM_Pos) /*!< 0x00008000 */
-#define USB_OTG_GINTMSK_EOPFM                   USB_OTG_GINTMSK_EOPFM_Msk      /*!< End of periodic frame interrupt mask */
-#define USB_OTG_GINTMSK_EPMISM_Pos              (17U)                          
-#define USB_OTG_GINTMSK_EPMISM_Msk              (0x1UL << USB_OTG_GINTMSK_EPMISM_Pos) /*!< 0x00020000 */
-#define USB_OTG_GINTMSK_EPMISM                  USB_OTG_GINTMSK_EPMISM_Msk     /*!< Endpoint mismatch interrupt mask */
-#define USB_OTG_GINTMSK_IEPINT_Pos              (18U)                          
-#define USB_OTG_GINTMSK_IEPINT_Msk              (0x1UL << USB_OTG_GINTMSK_IEPINT_Pos) /*!< 0x00040000 */
-#define USB_OTG_GINTMSK_IEPINT                  USB_OTG_GINTMSK_IEPINT_Msk     /*!< IN endpoints interrupt mask */
-#define USB_OTG_GINTMSK_OEPINT_Pos              (19U)                          
-#define USB_OTG_GINTMSK_OEPINT_Msk              (0x1UL << USB_OTG_GINTMSK_OEPINT_Pos) /*!< 0x00080000 */
-#define USB_OTG_GINTMSK_OEPINT                  USB_OTG_GINTMSK_OEPINT_Msk     /*!< OUT endpoints interrupt mask */
-#define USB_OTG_GINTMSK_IISOIXFRM_Pos           (20U)                          
-#define USB_OTG_GINTMSK_IISOIXFRM_Msk           (0x1UL << USB_OTG_GINTMSK_IISOIXFRM_Pos) /*!< 0x00100000 */
-#define USB_OTG_GINTMSK_IISOIXFRM               USB_OTG_GINTMSK_IISOIXFRM_Msk  /*!< Incomplete isochronous IN transfer mask */
-#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos     (21U)                          
-#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk     (0x1UL << USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos) /*!< 0x00200000 */
-#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM         USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk /*!< Incomplete periodic transfer mask */
-#define USB_OTG_GINTMSK_FSUSPM_Pos              (22U)                          
-#define USB_OTG_GINTMSK_FSUSPM_Msk              (0x1UL << USB_OTG_GINTMSK_FSUSPM_Pos) /*!< 0x00400000 */
-#define USB_OTG_GINTMSK_FSUSPM                  USB_OTG_GINTMSK_FSUSPM_Msk     /*!< Data fetch suspended mask */
-#define USB_OTG_GINTMSK_PRTIM_Pos               (24U)                          
-#define USB_OTG_GINTMSK_PRTIM_Msk               (0x1UL << USB_OTG_GINTMSK_PRTIM_Pos) /*!< 0x01000000 */
-#define USB_OTG_GINTMSK_PRTIM                   USB_OTG_GINTMSK_PRTIM_Msk      /*!< Host port interrupt mask */
-#define USB_OTG_GINTMSK_HCIM_Pos                (25U)                          
-#define USB_OTG_GINTMSK_HCIM_Msk                (0x1UL << USB_OTG_GINTMSK_HCIM_Pos) /*!< 0x02000000 */
-#define USB_OTG_GINTMSK_HCIM                    USB_OTG_GINTMSK_HCIM_Msk       /*!< Host channels interrupt mask */
-#define USB_OTG_GINTMSK_PTXFEM_Pos              (26U)                          
-#define USB_OTG_GINTMSK_PTXFEM_Msk              (0x1UL << USB_OTG_GINTMSK_PTXFEM_Pos) /*!< 0x04000000 */
-#define USB_OTG_GINTMSK_PTXFEM                  USB_OTG_GINTMSK_PTXFEM_Msk     /*!< Periodic TxFIFO empty mask */
-#define USB_OTG_GINTMSK_CIDSCHGM_Pos            (28U)                          
-#define USB_OTG_GINTMSK_CIDSCHGM_Msk            (0x1UL << USB_OTG_GINTMSK_CIDSCHGM_Pos) /*!< 0x10000000 */
-#define USB_OTG_GINTMSK_CIDSCHGM                USB_OTG_GINTMSK_CIDSCHGM_Msk   /*!< Connector ID status change mask */
-#define USB_OTG_GINTMSK_DISCINT_Pos             (29U)                          
-#define USB_OTG_GINTMSK_DISCINT_Msk             (0x1UL << USB_OTG_GINTMSK_DISCINT_Pos) /*!< 0x20000000 */
-#define USB_OTG_GINTMSK_DISCINT                 USB_OTG_GINTMSK_DISCINT_Msk    /*!< Disconnect detected interrupt mask */
-#define USB_OTG_GINTMSK_SRQIM_Pos               (30U)                          
-#define USB_OTG_GINTMSK_SRQIM_Msk               (0x1UL << USB_OTG_GINTMSK_SRQIM_Pos) /*!< 0x40000000 */
-#define USB_OTG_GINTMSK_SRQIM                   USB_OTG_GINTMSK_SRQIM_Msk      /*!< Session request/new session detected interrupt mask */
-#define USB_OTG_GINTMSK_WUIM_Pos                (31U)                          
-#define USB_OTG_GINTMSK_WUIM_Msk                (0x1UL << USB_OTG_GINTMSK_WUIM_Pos) /*!< 0x80000000 */
-#define USB_OTG_GINTMSK_WUIM                    USB_OTG_GINTMSK_WUIM_Msk       /*!< Resume/remote wakeup detected interrupt mask */
-
-/********************  Bit definition for USB_OTG_DAINT register  ********************/
-#define USB_OTG_DAINT_IEPINT_Pos                (0U)                           
-#define USB_OTG_DAINT_IEPINT_Msk                (0xFFFFUL << USB_OTG_DAINT_IEPINT_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_DAINT_IEPINT                    USB_OTG_DAINT_IEPINT_Msk       /*!< IN endpoint interrupt bits */
-#define USB_OTG_DAINT_OEPINT_Pos                (16U)                          
-#define USB_OTG_DAINT_OEPINT_Msk                (0xFFFFUL << USB_OTG_DAINT_OEPINT_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_DAINT_OEPINT                    USB_OTG_DAINT_OEPINT_Msk       /*!< OUT endpoint interrupt bits */
-
-/********************  Bit definition for USB_OTG_HAINTMSK register  ********************/
-#define USB_OTG_HAINTMSK_HAINTM_Pos             (0U)                           
-#define USB_OTG_HAINTMSK_HAINTM_Msk             (0xFFFFUL << USB_OTG_HAINTMSK_HAINTM_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_HAINTMSK_HAINTM                 USB_OTG_HAINTMSK_HAINTM_Msk    /*!< Channel interrupt mask */
-
-/********************  Bit definition for USB_OTG_GRXSTSP register  ********************/
-#define USB_OTG_GRXSTSP_EPNUM_Pos               (0U)                           
-#define USB_OTG_GRXSTSP_EPNUM_Msk               (0xFUL << USB_OTG_GRXSTSP_EPNUM_Pos) /*!< 0x0000000F */
-#define USB_OTG_GRXSTSP_EPNUM                   USB_OTG_GRXSTSP_EPNUM_Msk      /*!< IN EP interrupt mask bits */
-#define USB_OTG_GRXSTSP_BCNT_Pos                (4U)                           
-#define USB_OTG_GRXSTSP_BCNT_Msk                (0x7FFUL << USB_OTG_GRXSTSP_BCNT_Pos) /*!< 0x00007FF0 */
-#define USB_OTG_GRXSTSP_BCNT                    USB_OTG_GRXSTSP_BCNT_Msk       /*!< OUT EP interrupt mask bits */
-#define USB_OTG_GRXSTSP_DPID_Pos                (15U)                          
-#define USB_OTG_GRXSTSP_DPID_Msk                (0x3UL << USB_OTG_GRXSTSP_DPID_Pos) /*!< 0x00018000 */
-#define USB_OTG_GRXSTSP_DPID                    USB_OTG_GRXSTSP_DPID_Msk       /*!< OUT EP interrupt mask bits */
-#define USB_OTG_GRXSTSP_PKTSTS_Pos              (17U)                          
-#define USB_OTG_GRXSTSP_PKTSTS_Msk              (0xFUL << USB_OTG_GRXSTSP_PKTSTS_Pos) /*!< 0x001E0000 */
-#define USB_OTG_GRXSTSP_PKTSTS                  USB_OTG_GRXSTSP_PKTSTS_Msk     /*!< OUT EP interrupt mask bits */
-
-/********************  Bit definition for USB_OTG_DAINTMSK register  ********************/
-#define USB_OTG_DAINTMSK_IEPM_Pos               (0U)                           
-#define USB_OTG_DAINTMSK_IEPM_Msk               (0xFFFFUL << USB_OTG_DAINTMSK_IEPM_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_DAINTMSK_IEPM                   USB_OTG_DAINTMSK_IEPM_Msk      /*!< IN EP interrupt mask bits */
-#define USB_OTG_DAINTMSK_OEPM_Pos               (16U)                          
-#define USB_OTG_DAINTMSK_OEPM_Msk               (0xFFFFUL << USB_OTG_DAINTMSK_OEPM_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_DAINTMSK_OEPM                   USB_OTG_DAINTMSK_OEPM_Msk      /*!< OUT EP interrupt mask bits */
-
-/********************  Bit definition for USB_OTG_GRXFSIZ register  ********************/
-#define USB_OTG_GRXFSIZ_RXFD_Pos                (0U)                           
-#define USB_OTG_GRXFSIZ_RXFD_Msk                (0xFFFFUL << USB_OTG_GRXFSIZ_RXFD_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_GRXFSIZ_RXFD                    USB_OTG_GRXFSIZ_RXFD_Msk       /*!< RxFIFO depth */
-
-/********************  Bit definition for USB_OTG_DVBUSDIS register  ********************/
-#define USB_OTG_DVBUSDIS_VBUSDT_Pos             (0U)                           
-#define USB_OTG_DVBUSDIS_VBUSDT_Msk             (0xFFFFUL << USB_OTG_DVBUSDIS_VBUSDT_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_DVBUSDIS_VBUSDT                 USB_OTG_DVBUSDIS_VBUSDT_Msk    /*!< Device VBUS discharge time */
-
-/********************  Bit definition for OTG register  ********************/
-#define USB_OTG_NPTXFSA_Pos                     (0U)                           
-#define USB_OTG_NPTXFSA_Msk                     (0xFFFFUL << USB_OTG_NPTXFSA_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_NPTXFSA                         USB_OTG_NPTXFSA_Msk            /*!< Nonperiodic transmit RAM start address */
-#define USB_OTG_NPTXFD_Pos                      (16U)                          
-#define USB_OTG_NPTXFD_Msk                      (0xFFFFUL << USB_OTG_NPTXFD_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_NPTXFD                          USB_OTG_NPTXFD_Msk             /*!< Nonperiodic TxFIFO depth */
-#define USB_OTG_TX0FSA_Pos                      (0U)                           
-#define USB_OTG_TX0FSA_Msk                      (0xFFFFUL << USB_OTG_TX0FSA_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_TX0FSA                          USB_OTG_TX0FSA_Msk             /*!< Endpoint 0 transmit RAM start address */
-#define USB_OTG_TX0FD_Pos                       (16U)                          
-#define USB_OTG_TX0FD_Msk                       (0xFFFFUL << USB_OTG_TX0FD_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_TX0FD                           USB_OTG_TX0FD_Msk              /*!< Endpoint 0 TxFIFO depth */
-
-/********************  Bit definition for USB_OTG_DVBUSPULSE register  ********************/
-#define USB_OTG_DVBUSPULSE_DVBUSP_Pos           (0U)                           
-#define USB_OTG_DVBUSPULSE_DVBUSP_Msk           (0xFFFUL << USB_OTG_DVBUSPULSE_DVBUSP_Pos) /*!< 0x00000FFF */
-#define USB_OTG_DVBUSPULSE_DVBUSP               USB_OTG_DVBUSPULSE_DVBUSP_Msk  /*!< Device VBUS pulsing time */
-
-/********************  Bit definition for USB_OTG_GNPTXSTS register  ********************/
-#define USB_OTG_GNPTXSTS_NPTXFSAV_Pos           (0U)                           
-#define USB_OTG_GNPTXSTS_NPTXFSAV_Msk           (0xFFFFUL << USB_OTG_GNPTXSTS_NPTXFSAV_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_GNPTXSTS_NPTXFSAV               USB_OTG_GNPTXSTS_NPTXFSAV_Msk  /*!< Nonperiodic TxFIFO space available */
-
-#define USB_OTG_GNPTXSTS_NPTQXSAV_Pos           (16U)                          
-#define USB_OTG_GNPTXSTS_NPTQXSAV_Msk           (0xFFUL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00FF0000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV               USB_OTG_GNPTXSTS_NPTQXSAV_Msk  /*!< Nonperiodic transmit request queue space available */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_0             (0x01UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00010000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_1             (0x02UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00020000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_2             (0x04UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00040000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_3             (0x08UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00080000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_4             (0x10UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00100000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_5             (0x20UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00200000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_6             (0x40UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00400000 */
-#define USB_OTG_GNPTXSTS_NPTQXSAV_7             (0x80UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00800000 */
-
-#define USB_OTG_GNPTXSTS_NPTXQTOP_Pos           (24U)                          
-#define USB_OTG_GNPTXSTS_NPTXQTOP_Msk           (0x7FUL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x7F000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP               USB_OTG_GNPTXSTS_NPTXQTOP_Msk  /*!< Top of the nonperiodic transmit request queue */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_0             (0x01UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x01000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_1             (0x02UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x02000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_2             (0x04UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x04000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_3             (0x08UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x08000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_4             (0x10UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x10000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_5             (0x20UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x20000000 */
-#define USB_OTG_GNPTXSTS_NPTXQTOP_6             (0x40UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x40000000 */
-
-/********************  Bit definition for USB_OTG_DTHRCTL register  ********************/
-#define USB_OTG_DTHRCTL_NONISOTHREN_Pos         (0U)                           
-#define USB_OTG_DTHRCTL_NONISOTHREN_Msk         (0x1UL << USB_OTG_DTHRCTL_NONISOTHREN_Pos) /*!< 0x00000001 */
-#define USB_OTG_DTHRCTL_NONISOTHREN             USB_OTG_DTHRCTL_NONISOTHREN_Msk /*!< Nonisochronous IN endpoints threshold enable */
-#define USB_OTG_DTHRCTL_ISOTHREN_Pos            (1U)                           
-#define USB_OTG_DTHRCTL_ISOTHREN_Msk            (0x1UL << USB_OTG_DTHRCTL_ISOTHREN_Pos) /*!< 0x00000002 */
-#define USB_OTG_DTHRCTL_ISOTHREN                USB_OTG_DTHRCTL_ISOTHREN_Msk   /*!< ISO IN endpoint threshold enable */
-
-#define USB_OTG_DTHRCTL_TXTHRLEN_Pos            (2U)                           
-#define USB_OTG_DTHRCTL_TXTHRLEN_Msk            (0x1FFUL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x000007FC */
-#define USB_OTG_DTHRCTL_TXTHRLEN                USB_OTG_DTHRCTL_TXTHRLEN_Msk   /*!< Transmit threshold length */
-#define USB_OTG_DTHRCTL_TXTHRLEN_0              (0x001UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000004 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_1              (0x002UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000008 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_2              (0x004UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000010 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_3              (0x008UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000020 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_4              (0x010UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000040 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_5              (0x020UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000080 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_6              (0x040UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000100 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_7              (0x080UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000200 */
-#define USB_OTG_DTHRCTL_TXTHRLEN_8              (0x100UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000400 */
-#define USB_OTG_DTHRCTL_RXTHREN_Pos             (16U)                          
-#define USB_OTG_DTHRCTL_RXTHREN_Msk             (0x1UL << USB_OTG_DTHRCTL_RXTHREN_Pos) /*!< 0x00010000 */
-#define USB_OTG_DTHRCTL_RXTHREN                 USB_OTG_DTHRCTL_RXTHREN_Msk    /*!< Receive threshold enable */
-
-#define USB_OTG_DTHRCTL_RXTHRLEN_Pos            (17U)                          
-#define USB_OTG_DTHRCTL_RXTHRLEN_Msk            (0x1FFUL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x03FE0000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN                USB_OTG_DTHRCTL_RXTHRLEN_Msk   /*!< Receive threshold length */
-#define USB_OTG_DTHRCTL_RXTHRLEN_0              (0x001UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00020000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_1              (0x002UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00040000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_2              (0x004UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00080000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_3              (0x008UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00100000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_4              (0x010UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00200000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_5              (0x020UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00400000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_6              (0x040UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00800000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_7              (0x080UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x01000000 */
-#define USB_OTG_DTHRCTL_RXTHRLEN_8              (0x100UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x02000000 */
-#define USB_OTG_DTHRCTL_ARPEN_Pos               (27U)                          
-#define USB_OTG_DTHRCTL_ARPEN_Msk               (0x1UL << USB_OTG_DTHRCTL_ARPEN_Pos) /*!< 0x08000000 */
-#define USB_OTG_DTHRCTL_ARPEN                   USB_OTG_DTHRCTL_ARPEN_Msk      /*!< Arbiter parking enable */
-
-/********************  Bit definition for USB_OTG_DIEPEMPMSK register  ********************/
-#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos        (0U)                           
-#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk        (0xFFFFUL << USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_DIEPEMPMSK_INEPTXFEM            USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk /*!< IN EP Tx FIFO empty interrupt mask bits */
-
-/********************  Bit definition for USB_OTG_DEACHINT register  ********************/
-#define USB_OTG_DEACHINT_IEP1INT_Pos            (1U)                           
-#define USB_OTG_DEACHINT_IEP1INT_Msk            (0x1UL << USB_OTG_DEACHINT_IEP1INT_Pos) /*!< 0x00000002 */
-#define USB_OTG_DEACHINT_IEP1INT                USB_OTG_DEACHINT_IEP1INT_Msk   /*!< IN endpoint 1interrupt bit */
-#define USB_OTG_DEACHINT_OEP1INT_Pos            (17U)                          
-#define USB_OTG_DEACHINT_OEP1INT_Msk            (0x1UL << USB_OTG_DEACHINT_OEP1INT_Pos) /*!< 0x00020000 */
-#define USB_OTG_DEACHINT_OEP1INT                USB_OTG_DEACHINT_OEP1INT_Msk   /*!< OUT endpoint 1 interrupt bit */
-
-/********************  Bit definition for USB_OTG_GCCFG register  ********************/
-#define USB_OTG_GCCFG_PWRDWN_Pos                (16U)                          
-#define USB_OTG_GCCFG_PWRDWN_Msk                (0x1UL << USB_OTG_GCCFG_PWRDWN_Pos) /*!< 0x00010000 */
-#define USB_OTG_GCCFG_PWRDWN                    USB_OTG_GCCFG_PWRDWN_Msk       /*!< Power down */
-#define USB_OTG_GCCFG_VBUSASEN_Pos              (18U)                          
-#define USB_OTG_GCCFG_VBUSASEN_Msk              (0x1UL << USB_OTG_GCCFG_VBUSASEN_Pos) /*!< 0x00040000 */
-#define USB_OTG_GCCFG_VBUSASEN                  USB_OTG_GCCFG_VBUSASEN_Msk     /*!< Enable the VBUS sensing device */
-#define USB_OTG_GCCFG_VBUSBSEN_Pos              (19U)                          
-#define USB_OTG_GCCFG_VBUSBSEN_Msk              (0x1UL << USB_OTG_GCCFG_VBUSBSEN_Pos) /*!< 0x00080000 */
-#define USB_OTG_GCCFG_VBUSBSEN                  USB_OTG_GCCFG_VBUSBSEN_Msk     /*!< Enable the VBUS sensing device */
-#define USB_OTG_GCCFG_SOFOUTEN_Pos              (20U)                          
-#define USB_OTG_GCCFG_SOFOUTEN_Msk              (0x1UL << USB_OTG_GCCFG_SOFOUTEN_Pos) /*!< 0x00100000 */
-#define USB_OTG_GCCFG_SOFOUTEN                  USB_OTG_GCCFG_SOFOUTEN_Msk     /*!< SOF output enable */
-
-/********************  Bit definition for USB_OTG_DEACHINTMSK register  ********************/
-#define USB_OTG_DEACHINTMSK_IEP1INTM_Pos        (1U)                           
-#define USB_OTG_DEACHINTMSK_IEP1INTM_Msk        (0x1UL << USB_OTG_DEACHINTMSK_IEP1INTM_Pos) /*!< 0x00000002 */
-#define USB_OTG_DEACHINTMSK_IEP1INTM            USB_OTG_DEACHINTMSK_IEP1INTM_Msk /*!< IN Endpoint 1 interrupt mask bit */
-#define USB_OTG_DEACHINTMSK_OEP1INTM_Pos        (17U)                          
-#define USB_OTG_DEACHINTMSK_OEP1INTM_Msk        (0x1UL << USB_OTG_DEACHINTMSK_OEP1INTM_Pos) /*!< 0x00020000 */
-#define USB_OTG_DEACHINTMSK_OEP1INTM            USB_OTG_DEACHINTMSK_OEP1INTM_Msk /*!< OUT Endpoint 1 interrupt mask bit */
-
-/********************  Bit definition for USB_OTG_CID register  ********************/
-#define USB_OTG_CID_PRODUCT_ID_Pos              (0U)                           
-#define USB_OTG_CID_PRODUCT_ID_Msk              (0xFFFFFFFFUL << USB_OTG_CID_PRODUCT_ID_Pos) /*!< 0xFFFFFFFF */
-#define USB_OTG_CID_PRODUCT_ID                  USB_OTG_CID_PRODUCT_ID_Msk     /*!< Product ID field */
-
-/********************  Bit definition for USB_OTG_DIEPEACHMSK1 register  ********************/
-#define USB_OTG_DIEPEACHMSK1_XFRCM_Pos          (0U)                           
-#define USB_OTG_DIEPEACHMSK1_XFRCM_Msk          (0x1UL << USB_OTG_DIEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */
-#define USB_OTG_DIEPEACHMSK1_XFRCM              USB_OTG_DIEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */
-#define USB_OTG_DIEPEACHMSK1_EPDM_Pos           (1U)                           
-#define USB_OTG_DIEPEACHMSK1_EPDM_Msk           (0x1UL << USB_OTG_DIEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */
-#define USB_OTG_DIEPEACHMSK1_EPDM               USB_OTG_DIEPEACHMSK1_EPDM_Msk  /*!< Endpoint disabled interrupt mask */
-#define USB_OTG_DIEPEACHMSK1_TOM_Pos            (3U)                           
-#define USB_OTG_DIEPEACHMSK1_TOM_Msk            (0x1UL << USB_OTG_DIEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */
-#define USB_OTG_DIEPEACHMSK1_TOM                USB_OTG_DIEPEACHMSK1_TOM_Msk   /*!< Timeout condition mask (nonisochronous endpoints) */
-#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos      (4U)                           
-#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk      (0x1UL << USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */
-#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK          USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */
-#define USB_OTG_DIEPEACHMSK1_INEPNMM_Pos        (5U)                           
-#define USB_OTG_DIEPEACHMSK1_INEPNMM_Msk        (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */
-#define USB_OTG_DIEPEACHMSK1_INEPNMM            USB_OTG_DIEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */
-#define USB_OTG_DIEPEACHMSK1_INEPNEM_Pos        (6U)                           
-#define USB_OTG_DIEPEACHMSK1_INEPNEM_Msk        (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */
-#define USB_OTG_DIEPEACHMSK1_INEPNEM            USB_OTG_DIEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */
-#define USB_OTG_DIEPEACHMSK1_TXFURM_Pos         (8U)                           
-#define USB_OTG_DIEPEACHMSK1_TXFURM_Msk         (0x1UL << USB_OTG_DIEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */
-#define USB_OTG_DIEPEACHMSK1_TXFURM             USB_OTG_DIEPEACHMSK1_TXFURM_Msk /*!< FIFO underrun mask */
-#define USB_OTG_DIEPEACHMSK1_BIM_Pos            (9U)                           
-#define USB_OTG_DIEPEACHMSK1_BIM_Msk            (0x1UL << USB_OTG_DIEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */
-#define USB_OTG_DIEPEACHMSK1_BIM                USB_OTG_DIEPEACHMSK1_BIM_Msk   /*!< BNA interrupt mask */
-#define USB_OTG_DIEPEACHMSK1_NAKM_Pos           (13U)                          
-#define USB_OTG_DIEPEACHMSK1_NAKM_Msk           (0x1UL << USB_OTG_DIEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */
-#define USB_OTG_DIEPEACHMSK1_NAKM               USB_OTG_DIEPEACHMSK1_NAKM_Msk  /*!< NAK interrupt mask */
-
-/********************  Bit definition for USB_OTG_HPRT register  ********************/
-#define USB_OTG_HPRT_PCSTS_Pos                  (0U)                           
-#define USB_OTG_HPRT_PCSTS_Msk                  (0x1UL << USB_OTG_HPRT_PCSTS_Pos) /*!< 0x00000001 */
-#define USB_OTG_HPRT_PCSTS                      USB_OTG_HPRT_PCSTS_Msk         /*!< Port connect status */
-#define USB_OTG_HPRT_PCDET_Pos                  (1U)                           
-#define USB_OTG_HPRT_PCDET_Msk                  (0x1UL << USB_OTG_HPRT_PCDET_Pos) /*!< 0x00000002 */
-#define USB_OTG_HPRT_PCDET                      USB_OTG_HPRT_PCDET_Msk         /*!< Port connect detected */
-#define USB_OTG_HPRT_PENA_Pos                   (2U)                           
-#define USB_OTG_HPRT_PENA_Msk                   (0x1UL << USB_OTG_HPRT_PENA_Pos) /*!< 0x00000004 */
-#define USB_OTG_HPRT_PENA                       USB_OTG_HPRT_PENA_Msk          /*!< Port enable */
-#define USB_OTG_HPRT_PENCHNG_Pos                (3U)                           
-#define USB_OTG_HPRT_PENCHNG_Msk                (0x1UL << USB_OTG_HPRT_PENCHNG_Pos) /*!< 0x00000008 */
-#define USB_OTG_HPRT_PENCHNG                    USB_OTG_HPRT_PENCHNG_Msk       /*!< Port enable/disable change */
-#define USB_OTG_HPRT_POCA_Pos                   (4U)                           
-#define USB_OTG_HPRT_POCA_Msk                   (0x1UL << USB_OTG_HPRT_POCA_Pos) /*!< 0x00000010 */
-#define USB_OTG_HPRT_POCA                       USB_OTG_HPRT_POCA_Msk          /*!< Port overcurrent active */
-#define USB_OTG_HPRT_POCCHNG_Pos                (5U)                           
-#define USB_OTG_HPRT_POCCHNG_Msk                (0x1UL << USB_OTG_HPRT_POCCHNG_Pos) /*!< 0x00000020 */
-#define USB_OTG_HPRT_POCCHNG                    USB_OTG_HPRT_POCCHNG_Msk       /*!< Port overcurrent change */
-#define USB_OTG_HPRT_PRES_Pos                   (6U)                           
-#define USB_OTG_HPRT_PRES_Msk                   (0x1UL << USB_OTG_HPRT_PRES_Pos) /*!< 0x00000040 */
-#define USB_OTG_HPRT_PRES                       USB_OTG_HPRT_PRES_Msk          /*!< Port resume */
-#define USB_OTG_HPRT_PSUSP_Pos                  (7U)                           
-#define USB_OTG_HPRT_PSUSP_Msk                  (0x1UL << USB_OTG_HPRT_PSUSP_Pos) /*!< 0x00000080 */
-#define USB_OTG_HPRT_PSUSP                      USB_OTG_HPRT_PSUSP_Msk         /*!< Port suspend */
-#define USB_OTG_HPRT_PRST_Pos                   (8U)                           
-#define USB_OTG_HPRT_PRST_Msk                   (0x1UL << USB_OTG_HPRT_PRST_Pos) /*!< 0x00000100 */
-#define USB_OTG_HPRT_PRST                       USB_OTG_HPRT_PRST_Msk          /*!< Port reset */
-
-#define USB_OTG_HPRT_PLSTS_Pos                  (10U)                          
-#define USB_OTG_HPRT_PLSTS_Msk                  (0x3UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000C00 */
-#define USB_OTG_HPRT_PLSTS                      USB_OTG_HPRT_PLSTS_Msk         /*!< Port line status */
-#define USB_OTG_HPRT_PLSTS_0                    (0x1UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000400 */
-#define USB_OTG_HPRT_PLSTS_1                    (0x2UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000800 */
-#define USB_OTG_HPRT_PPWR_Pos                   (12U)                          
-#define USB_OTG_HPRT_PPWR_Msk                   (0x1UL << USB_OTG_HPRT_PPWR_Pos) /*!< 0x00001000 */
-#define USB_OTG_HPRT_PPWR                       USB_OTG_HPRT_PPWR_Msk          /*!< Port power */
-
-#define USB_OTG_HPRT_PTCTL_Pos                  (13U)                          
-#define USB_OTG_HPRT_PTCTL_Msk                  (0xFUL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x0001E000 */
-#define USB_OTG_HPRT_PTCTL                      USB_OTG_HPRT_PTCTL_Msk         /*!< Port test control */
-#define USB_OTG_HPRT_PTCTL_0                    (0x1UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00002000 */
-#define USB_OTG_HPRT_PTCTL_1                    (0x2UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00004000 */
-#define USB_OTG_HPRT_PTCTL_2                    (0x4UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00008000 */
-#define USB_OTG_HPRT_PTCTL_3                    (0x8UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00010000 */
-
-#define USB_OTG_HPRT_PSPD_Pos                   (17U)                          
-#define USB_OTG_HPRT_PSPD_Msk                   (0x3UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00060000 */
-#define USB_OTG_HPRT_PSPD                       USB_OTG_HPRT_PSPD_Msk          /*!< Port speed */
-#define USB_OTG_HPRT_PSPD_0                     (0x1UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00020000 */
-#define USB_OTG_HPRT_PSPD_1                     (0x2UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00040000 */
-
-/********************  Bit definition for USB_OTG_DOEPEACHMSK1 register  ********************/
-#define USB_OTG_DOEPEACHMSK1_XFRCM_Pos          (0U)                           
-#define USB_OTG_DOEPEACHMSK1_XFRCM_Msk          (0x1UL << USB_OTG_DOEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */
-#define USB_OTG_DOEPEACHMSK1_XFRCM              USB_OTG_DOEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */
-#define USB_OTG_DOEPEACHMSK1_EPDM_Pos           (1U)                           
-#define USB_OTG_DOEPEACHMSK1_EPDM_Msk           (0x1UL << USB_OTG_DOEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */
-#define USB_OTG_DOEPEACHMSK1_EPDM               USB_OTG_DOEPEACHMSK1_EPDM_Msk  /*!< Endpoint disabled interrupt mask */
-#define USB_OTG_DOEPEACHMSK1_TOM_Pos            (3U)                           
-#define USB_OTG_DOEPEACHMSK1_TOM_Msk            (0x1UL << USB_OTG_DOEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */
-#define USB_OTG_DOEPEACHMSK1_TOM                USB_OTG_DOEPEACHMSK1_TOM_Msk   /*!< Timeout condition mask */
-#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos      (4U)                           
-#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk      (0x1UL << USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */
-#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK          USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */
-#define USB_OTG_DOEPEACHMSK1_INEPNMM_Pos        (5U)                           
-#define USB_OTG_DOEPEACHMSK1_INEPNMM_Msk        (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */
-#define USB_OTG_DOEPEACHMSK1_INEPNMM            USB_OTG_DOEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */
-#define USB_OTG_DOEPEACHMSK1_INEPNEM_Pos        (6U)                           
-#define USB_OTG_DOEPEACHMSK1_INEPNEM_Msk        (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */
-#define USB_OTG_DOEPEACHMSK1_INEPNEM            USB_OTG_DOEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */
-#define USB_OTG_DOEPEACHMSK1_TXFURM_Pos         (8U)                           
-#define USB_OTG_DOEPEACHMSK1_TXFURM_Msk         (0x1UL << USB_OTG_DOEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */
-#define USB_OTG_DOEPEACHMSK1_TXFURM             USB_OTG_DOEPEACHMSK1_TXFURM_Msk /*!< OUT packet error mask */
-#define USB_OTG_DOEPEACHMSK1_BIM_Pos            (9U)                           
-#define USB_OTG_DOEPEACHMSK1_BIM_Msk            (0x1UL << USB_OTG_DOEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */
-#define USB_OTG_DOEPEACHMSK1_BIM                USB_OTG_DOEPEACHMSK1_BIM_Msk   /*!< BNA interrupt mask */
-#define USB_OTG_DOEPEACHMSK1_BERRM_Pos          (12U)                          
-#define USB_OTG_DOEPEACHMSK1_BERRM_Msk          (0x1UL << USB_OTG_DOEPEACHMSK1_BERRM_Pos) /*!< 0x00001000 */
-#define USB_OTG_DOEPEACHMSK1_BERRM              USB_OTG_DOEPEACHMSK1_BERRM_Msk /*!< Bubble error interrupt mask */
-#define USB_OTG_DOEPEACHMSK1_NAKM_Pos           (13U)                          
-#define USB_OTG_DOEPEACHMSK1_NAKM_Msk           (0x1UL << USB_OTG_DOEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */
-#define USB_OTG_DOEPEACHMSK1_NAKM               USB_OTG_DOEPEACHMSK1_NAKM_Msk  /*!< NAK interrupt mask */
-#define USB_OTG_DOEPEACHMSK1_NYETM_Pos          (14U)                          
-#define USB_OTG_DOEPEACHMSK1_NYETM_Msk          (0x1UL << USB_OTG_DOEPEACHMSK1_NYETM_Pos) /*!< 0x00004000 */
-#define USB_OTG_DOEPEACHMSK1_NYETM              USB_OTG_DOEPEACHMSK1_NYETM_Msk /*!< NYET interrupt mask */
-
-/********************  Bit definition for USB_OTG_HPTXFSIZ register  ********************/
-#define USB_OTG_HPTXFSIZ_PTXSA_Pos              (0U)                           
-#define USB_OTG_HPTXFSIZ_PTXSA_Msk              (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXSA_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_HPTXFSIZ_PTXSA                  USB_OTG_HPTXFSIZ_PTXSA_Msk     /*!< Host periodic TxFIFO start address */
-#define USB_OTG_HPTXFSIZ_PTXFD_Pos              (16U)                          
-#define USB_OTG_HPTXFSIZ_PTXFD_Msk              (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXFD_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_HPTXFSIZ_PTXFD                  USB_OTG_HPTXFSIZ_PTXFD_Msk     /*!< Host periodic TxFIFO depth */
-
-/********************  Bit definition for USB_OTG_DIEPCTL register  ********************/
-#define USB_OTG_DIEPCTL_MPSIZ_Pos               (0U)                           
-#define USB_OTG_DIEPCTL_MPSIZ_Msk               (0x7FFUL << USB_OTG_DIEPCTL_MPSIZ_Pos) /*!< 0x000007FF */
-#define USB_OTG_DIEPCTL_MPSIZ                   USB_OTG_DIEPCTL_MPSIZ_Msk      /*!< Maximum packet size */
-#define USB_OTG_DIEPCTL_USBAEP_Pos              (15U)                          
-#define USB_OTG_DIEPCTL_USBAEP_Msk              (0x1UL << USB_OTG_DIEPCTL_USBAEP_Pos) /*!< 0x00008000 */
-#define USB_OTG_DIEPCTL_USBAEP                  USB_OTG_DIEPCTL_USBAEP_Msk     /*!< USB active endpoint */
-#define USB_OTG_DIEPCTL_EONUM_DPID_Pos          (16U)                          
-#define USB_OTG_DIEPCTL_EONUM_DPID_Msk          (0x1UL << USB_OTG_DIEPCTL_EONUM_DPID_Pos) /*!< 0x00010000 */
-#define USB_OTG_DIEPCTL_EONUM_DPID              USB_OTG_DIEPCTL_EONUM_DPID_Msk /*!< Even/odd frame */
-#define USB_OTG_DIEPCTL_NAKSTS_Pos              (17U)                          
-#define USB_OTG_DIEPCTL_NAKSTS_Msk              (0x1UL << USB_OTG_DIEPCTL_NAKSTS_Pos) /*!< 0x00020000 */
-#define USB_OTG_DIEPCTL_NAKSTS                  USB_OTG_DIEPCTL_NAKSTS_Msk     /*!< NAK status */
-
-#define USB_OTG_DIEPCTL_EPTYP_Pos               (18U)                          
-#define USB_OTG_DIEPCTL_EPTYP_Msk               (0x3UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x000C0000 */
-#define USB_OTG_DIEPCTL_EPTYP                   USB_OTG_DIEPCTL_EPTYP_Msk      /*!< Endpoint type */
-#define USB_OTG_DIEPCTL_EPTYP_0                 (0x1UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00040000 */
-#define USB_OTG_DIEPCTL_EPTYP_1                 (0x2UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00080000 */
-#define USB_OTG_DIEPCTL_STALL_Pos               (21U)                          
-#define USB_OTG_DIEPCTL_STALL_Msk               (0x1UL << USB_OTG_DIEPCTL_STALL_Pos) /*!< 0x00200000 */
-#define USB_OTG_DIEPCTL_STALL                   USB_OTG_DIEPCTL_STALL_Msk      /*!< STALL handshake */
-
-#define USB_OTG_DIEPCTL_TXFNUM_Pos              (22U)                          
-#define USB_OTG_DIEPCTL_TXFNUM_Msk              (0xFUL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x03C00000 */
-#define USB_OTG_DIEPCTL_TXFNUM                  USB_OTG_DIEPCTL_TXFNUM_Msk     /*!< TxFIFO number */
-#define USB_OTG_DIEPCTL_TXFNUM_0                (0x1UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00400000 */
-#define USB_OTG_DIEPCTL_TXFNUM_1                (0x2UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00800000 */
-#define USB_OTG_DIEPCTL_TXFNUM_2                (0x4UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x01000000 */
-#define USB_OTG_DIEPCTL_TXFNUM_3                (0x8UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x02000000 */
-#define USB_OTG_DIEPCTL_CNAK_Pos                (26U)                          
-#define USB_OTG_DIEPCTL_CNAK_Msk                (0x1UL << USB_OTG_DIEPCTL_CNAK_Pos) /*!< 0x04000000 */
-#define USB_OTG_DIEPCTL_CNAK                    USB_OTG_DIEPCTL_CNAK_Msk       /*!< Clear NAK */
-#define USB_OTG_DIEPCTL_SNAK_Pos                (27U)                          
-#define USB_OTG_DIEPCTL_SNAK_Msk                (0x1UL << USB_OTG_DIEPCTL_SNAK_Pos) /*!< 0x08000000 */
-#define USB_OTG_DIEPCTL_SNAK                    USB_OTG_DIEPCTL_SNAK_Msk       /*!< Set NAK */
-#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos      (28U)                          
-#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk      (0x1UL << USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos) /*!< 0x10000000 */
-#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM          USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk /*!< Set DATA0 PID */
-#define USB_OTG_DIEPCTL_SODDFRM_Pos             (29U)                          
-#define USB_OTG_DIEPCTL_SODDFRM_Msk             (0x1UL << USB_OTG_DIEPCTL_SODDFRM_Pos) /*!< 0x20000000 */
-#define USB_OTG_DIEPCTL_SODDFRM                 USB_OTG_DIEPCTL_SODDFRM_Msk    /*!< Set odd frame */
-#define USB_OTG_DIEPCTL_EPDIS_Pos               (30U)                          
-#define USB_OTG_DIEPCTL_EPDIS_Msk               (0x1UL << USB_OTG_DIEPCTL_EPDIS_Pos) /*!< 0x40000000 */
-#define USB_OTG_DIEPCTL_EPDIS                   USB_OTG_DIEPCTL_EPDIS_Msk      /*!< Endpoint disable */
-#define USB_OTG_DIEPCTL_EPENA_Pos               (31U)                          
-#define USB_OTG_DIEPCTL_EPENA_Msk               (0x1UL << USB_OTG_DIEPCTL_EPENA_Pos) /*!< 0x80000000 */
-#define USB_OTG_DIEPCTL_EPENA                   USB_OTG_DIEPCTL_EPENA_Msk      /*!< Endpoint enable */
-
-/********************  Bit definition for USB_OTG_HCCHAR register  ********************/
-#define USB_OTG_HCCHAR_MPSIZ_Pos                (0U)                           
-#define USB_OTG_HCCHAR_MPSIZ_Msk                (0x7FFUL << USB_OTG_HCCHAR_MPSIZ_Pos) /*!< 0x000007FF */
-#define USB_OTG_HCCHAR_MPSIZ                    USB_OTG_HCCHAR_MPSIZ_Msk       /*!< Maximum packet size */
-
-#define USB_OTG_HCCHAR_EPNUM_Pos                (11U)                          
-#define USB_OTG_HCCHAR_EPNUM_Msk                (0xFUL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00007800 */
-#define USB_OTG_HCCHAR_EPNUM                    USB_OTG_HCCHAR_EPNUM_Msk       /*!< Endpoint number */
-#define USB_OTG_HCCHAR_EPNUM_0                  (0x1UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00000800 */
-#define USB_OTG_HCCHAR_EPNUM_1                  (0x2UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00001000 */
-#define USB_OTG_HCCHAR_EPNUM_2                  (0x4UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00002000 */
-#define USB_OTG_HCCHAR_EPNUM_3                  (0x8UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00004000 */
-#define USB_OTG_HCCHAR_EPDIR_Pos                (15U)                          
-#define USB_OTG_HCCHAR_EPDIR_Msk                (0x1UL << USB_OTG_HCCHAR_EPDIR_Pos) /*!< 0x00008000 */
-#define USB_OTG_HCCHAR_EPDIR                    USB_OTG_HCCHAR_EPDIR_Msk       /*!< Endpoint direction */
-#define USB_OTG_HCCHAR_LSDEV_Pos                (17U)                          
-#define USB_OTG_HCCHAR_LSDEV_Msk                (0x1UL << USB_OTG_HCCHAR_LSDEV_Pos) /*!< 0x00020000 */
-#define USB_OTG_HCCHAR_LSDEV                    USB_OTG_HCCHAR_LSDEV_Msk       /*!< Low-speed device */
-
-#define USB_OTG_HCCHAR_EPTYP_Pos                (18U)                          
-#define USB_OTG_HCCHAR_EPTYP_Msk                (0x3UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x000C0000 */
-#define USB_OTG_HCCHAR_EPTYP                    USB_OTG_HCCHAR_EPTYP_Msk       /*!< Endpoint type */
-#define USB_OTG_HCCHAR_EPTYP_0                  (0x1UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00040000 */
-#define USB_OTG_HCCHAR_EPTYP_1                  (0x2UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00080000 */
-                                      
-#define USB_OTG_HCCHAR_MC_Pos                   (20U)                          
-#define USB_OTG_HCCHAR_MC_Msk                   (0x3UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00300000 */
-#define USB_OTG_HCCHAR_MC                       USB_OTG_HCCHAR_MC_Msk          /*!< Multi Count (MC) / Error Count (EC) */
-#define USB_OTG_HCCHAR_MC_0                     (0x1UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00100000 */
-#define USB_OTG_HCCHAR_MC_1                     (0x2UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00200000 */
-
-#define USB_OTG_HCCHAR_DAD_Pos                  (22U)                          
-#define USB_OTG_HCCHAR_DAD_Msk                  (0x7FUL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x1FC00000 */
-#define USB_OTG_HCCHAR_DAD                      USB_OTG_HCCHAR_DAD_Msk         /*!< Device address */
-#define USB_OTG_HCCHAR_DAD_0                    (0x01UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x00400000 */
-#define USB_OTG_HCCHAR_DAD_1                    (0x02UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x00800000 */
-#define USB_OTG_HCCHAR_DAD_2                    (0x04UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x01000000 */
-#define USB_OTG_HCCHAR_DAD_3                    (0x08UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x02000000 */
-#define USB_OTG_HCCHAR_DAD_4                    (0x10UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x04000000 */
-#define USB_OTG_HCCHAR_DAD_5                    (0x20UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x08000000 */
-#define USB_OTG_HCCHAR_DAD_6                    (0x40UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x10000000 */
-#define USB_OTG_HCCHAR_ODDFRM_Pos               (29U)                          
-#define USB_OTG_HCCHAR_ODDFRM_Msk               (0x1UL << USB_OTG_HCCHAR_ODDFRM_Pos) /*!< 0x20000000 */
-#define USB_OTG_HCCHAR_ODDFRM                   USB_OTG_HCCHAR_ODDFRM_Msk      /*!< Odd frame */
-#define USB_OTG_HCCHAR_CHDIS_Pos                (30U)                          
-#define USB_OTG_HCCHAR_CHDIS_Msk                (0x1UL << USB_OTG_HCCHAR_CHDIS_Pos) /*!< 0x40000000 */
-#define USB_OTG_HCCHAR_CHDIS                    USB_OTG_HCCHAR_CHDIS_Msk       /*!< Channel disable */
-#define USB_OTG_HCCHAR_CHENA_Pos                (31U)                          
-#define USB_OTG_HCCHAR_CHENA_Msk                (0x1UL << USB_OTG_HCCHAR_CHENA_Pos) /*!< 0x80000000 */
-#define USB_OTG_HCCHAR_CHENA                    USB_OTG_HCCHAR_CHENA_Msk       /*!< Channel enable */
-
-/********************  Bit definition for USB_OTG_HCSPLT register  ********************/
-
-#define USB_OTG_HCSPLT_PRTADDR_Pos              (0U)                           
-#define USB_OTG_HCSPLT_PRTADDR_Msk              (0x7FUL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x0000007F */
-#define USB_OTG_HCSPLT_PRTADDR                  USB_OTG_HCSPLT_PRTADDR_Msk     /*!< Port address */
-#define USB_OTG_HCSPLT_PRTADDR_0                (0x01UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000001 */
-#define USB_OTG_HCSPLT_PRTADDR_1                (0x02UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000002 */
-#define USB_OTG_HCSPLT_PRTADDR_2                (0x04UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000004 */
-#define USB_OTG_HCSPLT_PRTADDR_3                (0x08UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000008 */
-#define USB_OTG_HCSPLT_PRTADDR_4                (0x10UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000010 */
-#define USB_OTG_HCSPLT_PRTADDR_5                (0x20UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000020 */
-#define USB_OTG_HCSPLT_PRTADDR_6                (0x40UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000040 */
-
-#define USB_OTG_HCSPLT_HUBADDR_Pos              (7U)                           
-#define USB_OTG_HCSPLT_HUBADDR_Msk              (0x7FUL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00003F80 */
-#define USB_OTG_HCSPLT_HUBADDR                  USB_OTG_HCSPLT_HUBADDR_Msk     /*!< Hub address */
-#define USB_OTG_HCSPLT_HUBADDR_0                (0x01UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000080 */
-#define USB_OTG_HCSPLT_HUBADDR_1                (0x02UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000100 */
-#define USB_OTG_HCSPLT_HUBADDR_2                (0x04UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000200 */
-#define USB_OTG_HCSPLT_HUBADDR_3                (0x08UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000400 */
-#define USB_OTG_HCSPLT_HUBADDR_4                (0x10UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000800 */
-#define USB_OTG_HCSPLT_HUBADDR_5                (0x20UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00001000 */
-#define USB_OTG_HCSPLT_HUBADDR_6                (0x40UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00002000 */
-
-#define USB_OTG_HCSPLT_XACTPOS_Pos              (14U)                          
-#define USB_OTG_HCSPLT_XACTPOS_Msk              (0x3UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x0000C000 */
-#define USB_OTG_HCSPLT_XACTPOS                  USB_OTG_HCSPLT_XACTPOS_Msk     /*!< XACTPOS */
-#define USB_OTG_HCSPLT_XACTPOS_0                (0x1UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00004000 */
-#define USB_OTG_HCSPLT_XACTPOS_1                (0x2UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00008000 */
-#define USB_OTG_HCSPLT_COMPLSPLT_Pos            (16U)                          
-#define USB_OTG_HCSPLT_COMPLSPLT_Msk            (0x1UL << USB_OTG_HCSPLT_COMPLSPLT_Pos) /*!< 0x00010000 */
-#define USB_OTG_HCSPLT_COMPLSPLT                USB_OTG_HCSPLT_COMPLSPLT_Msk   /*!< Do complete split */
-#define USB_OTG_HCSPLT_SPLITEN_Pos              (31U)                          
-#define USB_OTG_HCSPLT_SPLITEN_Msk              (0x1UL << USB_OTG_HCSPLT_SPLITEN_Pos) /*!< 0x80000000 */
-#define USB_OTG_HCSPLT_SPLITEN                  USB_OTG_HCSPLT_SPLITEN_Msk     /*!< Split enable */
-
-/********************  Bit definition for USB_OTG_HCINT register  ********************/
-#define USB_OTG_HCINT_XFRC_Pos                  (0U)                           
-#define USB_OTG_HCINT_XFRC_Msk                  (0x1UL << USB_OTG_HCINT_XFRC_Pos) /*!< 0x00000001 */
-#define USB_OTG_HCINT_XFRC                      USB_OTG_HCINT_XFRC_Msk         /*!< Transfer completed */
-#define USB_OTG_HCINT_CHH_Pos                   (1U)                           
-#define USB_OTG_HCINT_CHH_Msk                   (0x1UL << USB_OTG_HCINT_CHH_Pos) /*!< 0x00000002 */
-#define USB_OTG_HCINT_CHH                       USB_OTG_HCINT_CHH_Msk          /*!< Channel halted */
-#define USB_OTG_HCINT_AHBERR_Pos                (2U)                           
-#define USB_OTG_HCINT_AHBERR_Msk                (0x1UL << USB_OTG_HCINT_AHBERR_Pos) /*!< 0x00000004 */
-#define USB_OTG_HCINT_AHBERR                    USB_OTG_HCINT_AHBERR_Msk       /*!< AHB error */
-#define USB_OTG_HCINT_STALL_Pos                 (3U)                           
-#define USB_OTG_HCINT_STALL_Msk                 (0x1UL << USB_OTG_HCINT_STALL_Pos) /*!< 0x00000008 */
-#define USB_OTG_HCINT_STALL                     USB_OTG_HCINT_STALL_Msk        /*!< STALL response received interrupt */
-#define USB_OTG_HCINT_NAK_Pos                   (4U)                           
-#define USB_OTG_HCINT_NAK_Msk                   (0x1UL << USB_OTG_HCINT_NAK_Pos) /*!< 0x00000010 */
-#define USB_OTG_HCINT_NAK                       USB_OTG_HCINT_NAK_Msk          /*!< NAK response received interrupt */
-#define USB_OTG_HCINT_ACK_Pos                   (5U)                           
-#define USB_OTG_HCINT_ACK_Msk                   (0x1UL << USB_OTG_HCINT_ACK_Pos) /*!< 0x00000020 */
-#define USB_OTG_HCINT_ACK                       USB_OTG_HCINT_ACK_Msk          /*!< ACK response received/transmitted interrupt */
-#define USB_OTG_HCINT_NYET_Pos                  (6U)                           
-#define USB_OTG_HCINT_NYET_Msk                  (0x1UL << USB_OTG_HCINT_NYET_Pos) /*!< 0x00000040 */
-#define USB_OTG_HCINT_NYET                      USB_OTG_HCINT_NYET_Msk         /*!< Response received interrupt */
-#define USB_OTG_HCINT_TXERR_Pos                 (7U)                           
-#define USB_OTG_HCINT_TXERR_Msk                 (0x1UL << USB_OTG_HCINT_TXERR_Pos) /*!< 0x00000080 */
-#define USB_OTG_HCINT_TXERR                     USB_OTG_HCINT_TXERR_Msk        /*!< Transaction error */
-#define USB_OTG_HCINT_BBERR_Pos                 (8U)                           
-#define USB_OTG_HCINT_BBERR_Msk                 (0x1UL << USB_OTG_HCINT_BBERR_Pos) /*!< 0x00000100 */
-#define USB_OTG_HCINT_BBERR                     USB_OTG_HCINT_BBERR_Msk        /*!< Babble error */
-#define USB_OTG_HCINT_FRMOR_Pos                 (9U)                           
-#define USB_OTG_HCINT_FRMOR_Msk                 (0x1UL << USB_OTG_HCINT_FRMOR_Pos) /*!< 0x00000200 */
-#define USB_OTG_HCINT_FRMOR                     USB_OTG_HCINT_FRMOR_Msk        /*!< Frame overrun */
-#define USB_OTG_HCINT_DTERR_Pos                 (10U)                          
-#define USB_OTG_HCINT_DTERR_Msk                 (0x1UL << USB_OTG_HCINT_DTERR_Pos) /*!< 0x00000400 */
-#define USB_OTG_HCINT_DTERR                     USB_OTG_HCINT_DTERR_Msk        /*!< Data toggle error */
-
-/********************  Bit definition for USB_OTG_DIEPINT register  ********************/
-#define USB_OTG_DIEPINT_XFRC_Pos                (0U)                           
-#define USB_OTG_DIEPINT_XFRC_Msk                (0x1UL << USB_OTG_DIEPINT_XFRC_Pos) /*!< 0x00000001 */
-#define USB_OTG_DIEPINT_XFRC                    USB_OTG_DIEPINT_XFRC_Msk       /*!< Transfer completed interrupt */
-#define USB_OTG_DIEPINT_EPDISD_Pos              (1U)                           
-#define USB_OTG_DIEPINT_EPDISD_Msk              (0x1UL << USB_OTG_DIEPINT_EPDISD_Pos) /*!< 0x00000002 */
-#define USB_OTG_DIEPINT_EPDISD                  USB_OTG_DIEPINT_EPDISD_Msk     /*!< Endpoint disabled interrupt */
-#define USB_OTG_DIEPINT_AHBERR_Pos               (2U)
-#define USB_OTG_DIEPINT_AHBERR_Msk               (0x1UL << USB_OTG_DIEPINT_AHBERR_Pos) /*!< 0x00000004 */
-#define USB_OTG_DIEPINT_AHBERR                   USB_OTG_DIEPINT_AHBERR_Msk   /*!< AHB Error (AHBErr) during an IN transaction */
-#define USB_OTG_DIEPINT_TOC_Pos                 (3U)                           
-#define USB_OTG_DIEPINT_TOC_Msk                 (0x1UL << USB_OTG_DIEPINT_TOC_Pos) /*!< 0x00000008 */
-#define USB_OTG_DIEPINT_TOC                     USB_OTG_DIEPINT_TOC_Msk        /*!< Timeout condition */
-#define USB_OTG_DIEPINT_ITTXFE_Pos              (4U)                           
-#define USB_OTG_DIEPINT_ITTXFE_Msk              (0x1UL << USB_OTG_DIEPINT_ITTXFE_Pos) /*!< 0x00000010 */
-#define USB_OTG_DIEPINT_ITTXFE                  USB_OTG_DIEPINT_ITTXFE_Msk     /*!< IN token received when TxFIFO is empty */
-#define USB_OTG_DIEPINT_INEPNM_Pos               (5U)
-#define USB_OTG_DIEPINT_INEPNM_Msk               (0x1UL << USB_OTG_DIEPINT_INEPNM_Pos) /*!< 0x00000004 */
-#define USB_OTG_DIEPINT_INEPNM                   USB_OTG_DIEPINT_INEPNM_Msk   /*!< IN token received with EP mismatch */
-#define USB_OTG_DIEPINT_INEPNE_Pos              (6U)                           
-#define USB_OTG_DIEPINT_INEPNE_Msk              (0x1UL << USB_OTG_DIEPINT_INEPNE_Pos) /*!< 0x00000040 */
-#define USB_OTG_DIEPINT_INEPNE                  USB_OTG_DIEPINT_INEPNE_Msk     /*!< IN endpoint NAK effective */
-#define USB_OTG_DIEPINT_TXFE_Pos                (7U)                           
-#define USB_OTG_DIEPINT_TXFE_Msk                (0x1UL << USB_OTG_DIEPINT_TXFE_Pos) /*!< 0x00000080 */
-#define USB_OTG_DIEPINT_TXFE                    USB_OTG_DIEPINT_TXFE_Msk       /*!< Transmit FIFO empty */
-#define USB_OTG_DIEPINT_TXFIFOUDRN_Pos          (8U)                           
-#define USB_OTG_DIEPINT_TXFIFOUDRN_Msk          (0x1UL << USB_OTG_DIEPINT_TXFIFOUDRN_Pos) /*!< 0x00000100 */
-#define USB_OTG_DIEPINT_TXFIFOUDRN              USB_OTG_DIEPINT_TXFIFOUDRN_Msk /*!< Transmit Fifo Underrun */
-#define USB_OTG_DIEPINT_BNA_Pos                 (9U)                           
-#define USB_OTG_DIEPINT_BNA_Msk                 (0x1UL << USB_OTG_DIEPINT_BNA_Pos) /*!< 0x00000200 */
-#define USB_OTG_DIEPINT_BNA                     USB_OTG_DIEPINT_BNA_Msk        /*!< Buffer not available interrupt */
-#define USB_OTG_DIEPINT_PKTDRPSTS_Pos           (11U)                          
-#define USB_OTG_DIEPINT_PKTDRPSTS_Msk           (0x1UL << USB_OTG_DIEPINT_PKTDRPSTS_Pos) /*!< 0x00000800 */
-#define USB_OTG_DIEPINT_PKTDRPSTS               USB_OTG_DIEPINT_PKTDRPSTS_Msk  /*!< Packet dropped status */
-#define USB_OTG_DIEPINT_BERR_Pos                (12U)                          
-#define USB_OTG_DIEPINT_BERR_Msk                (0x1UL << USB_OTG_DIEPINT_BERR_Pos) /*!< 0x00001000 */
-#define USB_OTG_DIEPINT_BERR                    USB_OTG_DIEPINT_BERR_Msk       /*!< Babble error interrupt */
-#define USB_OTG_DIEPINT_NAK_Pos                 (13U)                          
-#define USB_OTG_DIEPINT_NAK_Msk                 (0x1UL << USB_OTG_DIEPINT_NAK_Pos) /*!< 0x00002000 */
-#define USB_OTG_DIEPINT_NAK                     USB_OTG_DIEPINT_NAK_Msk        /*!< NAK interrupt */
-
-/********************  Bit definition for USB_OTG_HCINTMSK register  ********************/
-#define USB_OTG_HCINTMSK_XFRCM_Pos              (0U)                           
-#define USB_OTG_HCINTMSK_XFRCM_Msk              (0x1UL << USB_OTG_HCINTMSK_XFRCM_Pos) /*!< 0x00000001 */
-#define USB_OTG_HCINTMSK_XFRCM                  USB_OTG_HCINTMSK_XFRCM_Msk     /*!< Transfer completed mask */
-#define USB_OTG_HCINTMSK_CHHM_Pos               (1U)                           
-#define USB_OTG_HCINTMSK_CHHM_Msk               (0x1UL << USB_OTG_HCINTMSK_CHHM_Pos) /*!< 0x00000002 */
-#define USB_OTG_HCINTMSK_CHHM                   USB_OTG_HCINTMSK_CHHM_Msk      /*!< Channel halted mask */
-#define USB_OTG_HCINTMSK_AHBERR_Pos             (2U)                           
-#define USB_OTG_HCINTMSK_AHBERR_Msk             (0x1UL << USB_OTG_HCINTMSK_AHBERR_Pos) /*!< 0x00000004 */
-#define USB_OTG_HCINTMSK_AHBERR                 USB_OTG_HCINTMSK_AHBERR_Msk    /*!< AHB error */
-#define USB_OTG_HCINTMSK_STALLM_Pos             (3U)                           
-#define USB_OTG_HCINTMSK_STALLM_Msk             (0x1UL << USB_OTG_HCINTMSK_STALLM_Pos) /*!< 0x00000008 */
-#define USB_OTG_HCINTMSK_STALLM                 USB_OTG_HCINTMSK_STALLM_Msk    /*!< STALL response received interrupt mask */
-#define USB_OTG_HCINTMSK_NAKM_Pos               (4U)                           
-#define USB_OTG_HCINTMSK_NAKM_Msk               (0x1UL << USB_OTG_HCINTMSK_NAKM_Pos) /*!< 0x00000010 */
-#define USB_OTG_HCINTMSK_NAKM                   USB_OTG_HCINTMSK_NAKM_Msk      /*!< NAK response received interrupt mask */
-#define USB_OTG_HCINTMSK_ACKM_Pos               (5U)                           
-#define USB_OTG_HCINTMSK_ACKM_Msk               (0x1UL << USB_OTG_HCINTMSK_ACKM_Pos) /*!< 0x00000020 */
-#define USB_OTG_HCINTMSK_ACKM                   USB_OTG_HCINTMSK_ACKM_Msk      /*!< ACK response received/transmitted interrupt mask */
-#define USB_OTG_HCINTMSK_NYET_Pos               (6U)                           
-#define USB_OTG_HCINTMSK_NYET_Msk               (0x1UL << USB_OTG_HCINTMSK_NYET_Pos) /*!< 0x00000040 */
-#define USB_OTG_HCINTMSK_NYET                   USB_OTG_HCINTMSK_NYET_Msk      /*!< response received interrupt mask */
-#define USB_OTG_HCINTMSK_TXERRM_Pos             (7U)                           
-#define USB_OTG_HCINTMSK_TXERRM_Msk             (0x1UL << USB_OTG_HCINTMSK_TXERRM_Pos) /*!< 0x00000080 */
-#define USB_OTG_HCINTMSK_TXERRM                 USB_OTG_HCINTMSK_TXERRM_Msk    /*!< Transaction error mask */
-#define USB_OTG_HCINTMSK_BBERRM_Pos             (8U)                           
-#define USB_OTG_HCINTMSK_BBERRM_Msk             (0x1UL << USB_OTG_HCINTMSK_BBERRM_Pos) /*!< 0x00000100 */
-#define USB_OTG_HCINTMSK_BBERRM                 USB_OTG_HCINTMSK_BBERRM_Msk    /*!< Babble error mask */
-#define USB_OTG_HCINTMSK_FRMORM_Pos             (9U)                           
-#define USB_OTG_HCINTMSK_FRMORM_Msk             (0x1UL << USB_OTG_HCINTMSK_FRMORM_Pos) /*!< 0x00000200 */
-#define USB_OTG_HCINTMSK_FRMORM                 USB_OTG_HCINTMSK_FRMORM_Msk    /*!< Frame overrun mask */
-#define USB_OTG_HCINTMSK_DTERRM_Pos             (10U)                          
-#define USB_OTG_HCINTMSK_DTERRM_Msk             (0x1UL << USB_OTG_HCINTMSK_DTERRM_Pos) /*!< 0x00000400 */
-#define USB_OTG_HCINTMSK_DTERRM                 USB_OTG_HCINTMSK_DTERRM_Msk    /*!< Data toggle error mask */
-
-/********************  Bit definition for USB_OTG_DIEPTSIZ register  ********************/
-
-#define USB_OTG_DIEPTSIZ_XFRSIZ_Pos             (0U)                           
-#define USB_OTG_DIEPTSIZ_XFRSIZ_Msk             (0x7FFFFUL << USB_OTG_DIEPTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */
-#define USB_OTG_DIEPTSIZ_XFRSIZ                 USB_OTG_DIEPTSIZ_XFRSIZ_Msk    /*!< Transfer size */
-#define USB_OTG_DIEPTSIZ_PKTCNT_Pos             (19U)                          
-#define USB_OTG_DIEPTSIZ_PKTCNT_Msk             (0x3FFUL << USB_OTG_DIEPTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */
-#define USB_OTG_DIEPTSIZ_PKTCNT                 USB_OTG_DIEPTSIZ_PKTCNT_Msk    /*!< Packet count */
-#define USB_OTG_DIEPTSIZ_MULCNT_Pos             (29U)                          
-#define USB_OTG_DIEPTSIZ_MULCNT_Msk             (0x3UL << USB_OTG_DIEPTSIZ_MULCNT_Pos) /*!< 0x60000000 */
-#define USB_OTG_DIEPTSIZ_MULCNT                 USB_OTG_DIEPTSIZ_MULCNT_Msk    /*!< Packet count */
-/********************  Bit definition for USB_OTG_HCTSIZ register  ********************/
-#define USB_OTG_HCTSIZ_XFRSIZ_Pos               (0U)                           
-#define USB_OTG_HCTSIZ_XFRSIZ_Msk               (0x7FFFFUL << USB_OTG_HCTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */
-#define USB_OTG_HCTSIZ_XFRSIZ                   USB_OTG_HCTSIZ_XFRSIZ_Msk      /*!< Transfer size */
-#define USB_OTG_HCTSIZ_PKTCNT_Pos               (19U)                          
-#define USB_OTG_HCTSIZ_PKTCNT_Msk               (0x3FFUL << USB_OTG_HCTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */
-#define USB_OTG_HCTSIZ_PKTCNT                   USB_OTG_HCTSIZ_PKTCNT_Msk      /*!< Packet count */
-#define USB_OTG_HCTSIZ_DOPING_Pos               (31U)                          
-#define USB_OTG_HCTSIZ_DOPING_Msk               (0x1UL << USB_OTG_HCTSIZ_DOPING_Pos) /*!< 0x80000000 */
-#define USB_OTG_HCTSIZ_DOPING                   USB_OTG_HCTSIZ_DOPING_Msk      /*!< Do PING */
-#define USB_OTG_HCTSIZ_DPID_Pos                 (29U)                          
-#define USB_OTG_HCTSIZ_DPID_Msk                 (0x3UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x60000000 */
-#define USB_OTG_HCTSIZ_DPID                     USB_OTG_HCTSIZ_DPID_Msk        /*!< Data PID */
-#define USB_OTG_HCTSIZ_DPID_0                   (0x1UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x20000000 */
-#define USB_OTG_HCTSIZ_DPID_1                   (0x2UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x40000000 */
-
-/********************  Bit definition for USB_OTG_DIEPDMA register  ********************/
-#define USB_OTG_DIEPDMA_DMAADDR_Pos             (0U)                           
-#define USB_OTG_DIEPDMA_DMAADDR_Msk             (0xFFFFFFFFUL << USB_OTG_DIEPDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */
-#define USB_OTG_DIEPDMA_DMAADDR                 USB_OTG_DIEPDMA_DMAADDR_Msk    /*!< DMA address */
-
-/********************  Bit definition for USB_OTG_HCDMA register  ********************/
-#define USB_OTG_HCDMA_DMAADDR_Pos               (0U)                           
-#define USB_OTG_HCDMA_DMAADDR_Msk               (0xFFFFFFFFUL << USB_OTG_HCDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */
-#define USB_OTG_HCDMA_DMAADDR                   USB_OTG_HCDMA_DMAADDR_Msk      /*!< DMA address */
-
-/********************  Bit definition for USB_OTG_DTXFSTS register  ********************/
-#define USB_OTG_DTXFSTS_INEPTFSAV_Pos           (0U)                           
-#define USB_OTG_DTXFSTS_INEPTFSAV_Msk           (0xFFFFUL << USB_OTG_DTXFSTS_INEPTFSAV_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_DTXFSTS_INEPTFSAV                USB_OTG_DTXFSTS_INEPTFSAV_Msk /*!< IN endpoint TxFIFO space available */
-
-/********************  Bit definition for USB_OTG_DIEPTXF register  ********************/
-#define USB_OTG_DIEPTXF_INEPTXSA_Pos            (0U)                           
-#define USB_OTG_DIEPTXF_INEPTXSA_Msk            (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXSA_Pos) /*!< 0x0000FFFF */
-#define USB_OTG_DIEPTXF_INEPTXSA                USB_OTG_DIEPTXF_INEPTXSA_Msk   /*!< IN endpoint FIFOx transmit RAM start address */
-#define USB_OTG_DIEPTXF_INEPTXFD_Pos            (16U)                          
-#define USB_OTG_DIEPTXF_INEPTXFD_Msk            (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXFD_Pos) /*!< 0xFFFF0000 */
-#define USB_OTG_DIEPTXF_INEPTXFD                USB_OTG_DIEPTXF_INEPTXFD_Msk   /*!< IN endpoint TxFIFO depth */
-
-/********************  Bit definition for USB_OTG_DOEPCTL register  ********************/
-
-#define USB_OTG_DOEPCTL_MPSIZ_Pos               (0U)                           
-#define USB_OTG_DOEPCTL_MPSIZ_Msk               (0x7FFUL << USB_OTG_DOEPCTL_MPSIZ_Pos) /*!< 0x000007FF */
-#define USB_OTG_DOEPCTL_MPSIZ                    USB_OTG_DOEPCTL_MPSIZ_Msk     /*!< Maximum packet size */          /*!<Bit 1 */
-#define USB_OTG_DOEPCTL_USBAEP_Pos              (15U)                          
-#define USB_OTG_DOEPCTL_USBAEP_Msk              (0x1UL << USB_OTG_DOEPCTL_USBAEP_Pos) /*!< 0x00008000 */
-#define USB_OTG_DOEPCTL_USBAEP                  USB_OTG_DOEPCTL_USBAEP_Msk     /*!< USB active endpoint */
-#define USB_OTG_DOEPCTL_NAKSTS_Pos              (17U)                          
-#define USB_OTG_DOEPCTL_NAKSTS_Msk              (0x1UL << USB_OTG_DOEPCTL_NAKSTS_Pos) /*!< 0x00020000 */
-#define USB_OTG_DOEPCTL_NAKSTS                  USB_OTG_DOEPCTL_NAKSTS_Msk     /*!< NAK status */
-#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM_Pos      (28U)                          
-#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM_Msk      (0x1UL << USB_OTG_DOEPCTL_SD0PID_SEVNFRM_Pos) /*!< 0x10000000 */
-#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM          USB_OTG_DOEPCTL_SD0PID_SEVNFRM_Msk /*!< Set DATA0 PID */
-#define USB_OTG_DOEPCTL_SODDFRM_Pos             (29U)                          
-#define USB_OTG_DOEPCTL_SODDFRM_Msk             (0x1UL << USB_OTG_DOEPCTL_SODDFRM_Pos) /*!< 0x20000000 */
-#define USB_OTG_DOEPCTL_SODDFRM                 USB_OTG_DOEPCTL_SODDFRM_Msk    /*!< Set odd frame */
-#define USB_OTG_DOEPCTL_EPTYP_Pos               (18U)                          
-#define USB_OTG_DOEPCTL_EPTYP_Msk               (0x3UL << USB_OTG_DOEPCTL_EPTYP_Pos) /*!< 0x000C0000 */
-#define USB_OTG_DOEPCTL_EPTYP                   USB_OTG_DOEPCTL_EPTYP_Msk      /*!< Endpoint type */
-#define USB_OTG_DOEPCTL_EPTYP_0                 (0x1UL << USB_OTG_DOEPCTL_EPTYP_Pos) /*!< 0x00040000 */
-#define USB_OTG_DOEPCTL_EPTYP_1                 (0x2UL << USB_OTG_DOEPCTL_EPTYP_Pos) /*!< 0x00080000 */
-#define USB_OTG_DOEPCTL_SNPM_Pos                (20U)                          
-#define USB_OTG_DOEPCTL_SNPM_Msk                (0x1UL << USB_OTG_DOEPCTL_SNPM_Pos) /*!< 0x00100000 */
-#define USB_OTG_DOEPCTL_SNPM                    USB_OTG_DOEPCTL_SNPM_Msk       /*!< Snoop mode */
-#define USB_OTG_DOEPCTL_STALL_Pos               (21U)                          
-#define USB_OTG_DOEPCTL_STALL_Msk               (0x1UL << USB_OTG_DOEPCTL_STALL_Pos) /*!< 0x00200000 */
-#define USB_OTG_DOEPCTL_STALL                   USB_OTG_DOEPCTL_STALL_Msk      /*!< STALL handshake */
-#define USB_OTG_DOEPCTL_CNAK_Pos                (26U)                          
-#define USB_OTG_DOEPCTL_CNAK_Msk                (0x1UL << USB_OTG_DOEPCTL_CNAK_Pos) /*!< 0x04000000 */
-#define USB_OTG_DOEPCTL_CNAK                    USB_OTG_DOEPCTL_CNAK_Msk       /*!< Clear NAK */
-#define USB_OTG_DOEPCTL_SNAK_Pos                (27U)                          
-#define USB_OTG_DOEPCTL_SNAK_Msk                (0x1UL << USB_OTG_DOEPCTL_SNAK_Pos) /*!< 0x08000000 */
-#define USB_OTG_DOEPCTL_SNAK                    USB_OTG_DOEPCTL_SNAK_Msk       /*!< Set NAK */
-#define USB_OTG_DOEPCTL_EPDIS_Pos               (30U)                          
-#define USB_OTG_DOEPCTL_EPDIS_Msk               (0x1UL << USB_OTG_DOEPCTL_EPDIS_Pos) /*!< 0x40000000 */
-#define USB_OTG_DOEPCTL_EPDIS                   USB_OTG_DOEPCTL_EPDIS_Msk      /*!< Endpoint disable */
-#define USB_OTG_DOEPCTL_EPENA_Pos               (31U)                          
-#define USB_OTG_DOEPCTL_EPENA_Msk               (0x1UL << USB_OTG_DOEPCTL_EPENA_Pos) /*!< 0x80000000 */
-#define USB_OTG_DOEPCTL_EPENA                   USB_OTG_DOEPCTL_EPENA_Msk      /*!< Endpoint enable */
-
-/********************  Bit definition for USB_OTG_DOEPINT register  ********************/
-#define USB_OTG_DOEPINT_XFRC_Pos                (0U)                           
-#define USB_OTG_DOEPINT_XFRC_Msk                (0x1UL << USB_OTG_DOEPINT_XFRC_Pos) /*!< 0x00000001 */
-#define USB_OTG_DOEPINT_XFRC                    USB_OTG_DOEPINT_XFRC_Msk       /*!< Transfer completed interrupt */
-#define USB_OTG_DOEPINT_EPDISD_Pos              (1U)                           
-#define USB_OTG_DOEPINT_EPDISD_Msk              (0x1UL << USB_OTG_DOEPINT_EPDISD_Pos) /*!< 0x00000002 */
-#define USB_OTG_DOEPINT_EPDISD                  USB_OTG_DOEPINT_EPDISD_Msk     /*!< Endpoint disabled interrupt */
-#define USB_OTG_DOEPINT_AHBERR_Pos               (2U)
-#define USB_OTG_DOEPINT_AHBERR_Msk               (0x1UL << USB_OTG_DOEPINT_AHBERR_Pos) /*!< 0x00000004 */
-#define USB_OTG_DOEPINT_AHBERR                   USB_OTG_DOEPINT_AHBERR_Msk   /*!< AHB Error (AHBErr) during an OUT transaction */
-#define USB_OTG_DOEPINT_STUP_Pos                (3U)                           
-#define USB_OTG_DOEPINT_STUP_Msk                (0x1UL << USB_OTG_DOEPINT_STUP_Pos) /*!< 0x00000008 */
-#define USB_OTG_DOEPINT_STUP                    USB_OTG_DOEPINT_STUP_Msk       /*!< SETUP phase done */
-#define USB_OTG_DOEPINT_OTEPDIS_Pos             (4U)                           
-#define USB_OTG_DOEPINT_OTEPDIS_Msk             (0x1UL << USB_OTG_DOEPINT_OTEPDIS_Pos) /*!< 0x00000010 */
-#define USB_OTG_DOEPINT_OTEPDIS                 USB_OTG_DOEPINT_OTEPDIS_Msk    /*!< OUT token received when endpoint disabled */
-#define USB_OTG_DOEPINT_OTEPSPR_Pos              (5U)                          
-#define USB_OTG_DOEPINT_OTEPSPR_Msk              (0x1UL << USB_OTG_DOEPINT_OTEPSPR_Pos) /*!< 0x00000020 */
-#define USB_OTG_DOEPINT_OTEPSPR                  USB_OTG_DOEPINT_OTEPSPR_Msk   /*!< Status Phase Received For Control Write */
-#define USB_OTG_DOEPINT_B2BSTUP_Pos             (6U)                           
-#define USB_OTG_DOEPINT_B2BSTUP_Msk             (0x1UL << USB_OTG_DOEPINT_B2BSTUP_Pos) /*!< 0x00000040 */
-#define USB_OTG_DOEPINT_B2BSTUP                 USB_OTG_DOEPINT_B2BSTUP_Msk    /*!< Back-to-back SETUP packets received */
-#define USB_OTG_DOEPINT_OUTPKTERR_Pos            (8U)
-#define USB_OTG_DOEPINT_OUTPKTERR_Msk            (0x1UL << USB_OTG_DOEPINT_OUTPKTERR_Pos) /*!< 0x00000100 */
-#define USB_OTG_DOEPINT_OUTPKTERR                USB_OTG_DOEPINT_OUTPKTERR_Msk   /*!< OUT packet error */
-#define USB_OTG_DOEPINT_NAK_Pos                  (13U)
-#define USB_OTG_DOEPINT_NAK_Msk                  (0x1UL << USB_OTG_DOEPINT_NAK_Pos) /*!< 0x00002000 */
-#define USB_OTG_DOEPINT_NAK                      USB_OTG_DOEPINT_NAK_Msk   /*!< NAK Packet is transmitted by the device */
-#define USB_OTG_DOEPINT_NYET_Pos                (14U)                          
-#define USB_OTG_DOEPINT_NYET_Msk                (0x1UL << USB_OTG_DOEPINT_NYET_Pos) /*!< 0x00004000 */
-#define USB_OTG_DOEPINT_NYET                    USB_OTG_DOEPINT_NYET_Msk       /*!< NYET interrupt */
-#define USB_OTG_DOEPINT_STPKTRX_Pos              (15U)
-#define USB_OTG_DOEPINT_STPKTRX_Msk              (0x1UL << USB_OTG_DOEPINT_STPKTRX_Pos) /*!< 0x00008000 */
-#define USB_OTG_DOEPINT_STPKTRX                  USB_OTG_DOEPINT_STPKTRX_Msk   /*!< Setup Packet Received */
-/********************  Bit definition for USB_OTG_DOEPTSIZ register  ********************/
-
-#define USB_OTG_DOEPTSIZ_XFRSIZ_Pos             (0U)                           
-#define USB_OTG_DOEPTSIZ_XFRSIZ_Msk             (0x7FFFFUL << USB_OTG_DOEPTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */
-#define USB_OTG_DOEPTSIZ_XFRSIZ                 USB_OTG_DOEPTSIZ_XFRSIZ_Msk    /*!< Transfer size */
-#define USB_OTG_DOEPTSIZ_PKTCNT_Pos             (19U)                          
-#define USB_OTG_DOEPTSIZ_PKTCNT_Msk             (0x3FFUL << USB_OTG_DOEPTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */
-#define USB_OTG_DOEPTSIZ_PKTCNT                 USB_OTG_DOEPTSIZ_PKTCNT_Msk    /*!< Packet count */
-
-#define USB_OTG_DOEPTSIZ_STUPCNT_Pos            (29U)                          
-#define USB_OTG_DOEPTSIZ_STUPCNT_Msk            (0x3UL << USB_OTG_DOEPTSIZ_STUPCNT_Pos) /*!< 0x60000000 */
-#define USB_OTG_DOEPTSIZ_STUPCNT                USB_OTG_DOEPTSIZ_STUPCNT_Msk   /*!< SETUP packet count */
-#define USB_OTG_DOEPTSIZ_STUPCNT_0              (0x1UL << USB_OTG_DOEPTSIZ_STUPCNT_Pos) /*!< 0x20000000 */
-#define USB_OTG_DOEPTSIZ_STUPCNT_1              (0x2UL << USB_OTG_DOEPTSIZ_STUPCNT_Pos) /*!< 0x40000000 */
-
-/********************  Bit definition for PCGCCTL register  ********************/
-#define USB_OTG_PCGCCTL_STOPCLK_Pos             (0U)                           
-#define USB_OTG_PCGCCTL_STOPCLK_Msk             (0x1UL << USB_OTG_PCGCCTL_STOPCLK_Pos) /*!< 0x00000001 */
-#define USB_OTG_PCGCCTL_STOPCLK                 USB_OTG_PCGCCTL_STOPCLK_Msk    /*!< SETUP packet count */
-#define USB_OTG_PCGCCTL_GATECLK_Pos             (1U)                           
-#define USB_OTG_PCGCCTL_GATECLK_Msk             (0x1UL << USB_OTG_PCGCCTL_GATECLK_Pos) /*!< 0x00000002 */
-#define USB_OTG_PCGCCTL_GATECLK                 USB_OTG_PCGCCTL_GATECLK_Msk    /*!<Bit 0 */
-#define USB_OTG_PCGCCTL_PHYSUSP_Pos             (4U)                           
-#define USB_OTG_PCGCCTL_PHYSUSP_Msk             (0x1UL << USB_OTG_PCGCCTL_PHYSUSP_Pos) /*!< 0x00000010 */
-#define USB_OTG_PCGCCTL_PHYSUSP                 USB_OTG_PCGCCTL_PHYSUSP_Msk    /*!<Bit 1 */
-
-/* Legacy define */
-/********************  Bit definition for OTG register  ********************/
-#define USB_OTG_CHNUM_Pos                       (0U)                           
-#define USB_OTG_CHNUM_Msk                       (0xFUL << USB_OTG_CHNUM_Pos)    /*!< 0x0000000F */
-#define USB_OTG_CHNUM                           USB_OTG_CHNUM_Msk              /*!< Channel number */
-#define USB_OTG_CHNUM_0                         (0x1UL << USB_OTG_CHNUM_Pos)    /*!< 0x00000001 */
-#define USB_OTG_CHNUM_1                         (0x2UL << USB_OTG_CHNUM_Pos)    /*!< 0x00000002 */
-#define USB_OTG_CHNUM_2                         (0x4UL << USB_OTG_CHNUM_Pos)    /*!< 0x00000004 */
-#define USB_OTG_CHNUM_3                         (0x8UL << USB_OTG_CHNUM_Pos)    /*!< 0x00000008 */
-#define USB_OTG_BCNT_Pos                        (4U)                           
-#define USB_OTG_BCNT_Msk                        (0x7FFUL << USB_OTG_BCNT_Pos)   /*!< 0x00007FF0 */
-#define USB_OTG_BCNT                            USB_OTG_BCNT_Msk               /*!< Byte count */
-
-#define USB_OTG_DPID_Pos                        (15U)                          
-#define USB_OTG_DPID_Msk                        (0x3UL << USB_OTG_DPID_Pos)     /*!< 0x00018000 */
-#define USB_OTG_DPID                            USB_OTG_DPID_Msk               /*!< Data PID */
-#define USB_OTG_DPID_0                          (0x1UL << USB_OTG_DPID_Pos)     /*!< 0x00008000 */
-#define USB_OTG_DPID_1                          (0x2UL << USB_OTG_DPID_Pos)     /*!< 0x00010000 */
-
-#define USB_OTG_PKTSTS_Pos                      (17U)                          
-#define USB_OTG_PKTSTS_Msk                      (0xFUL << USB_OTG_PKTSTS_Pos)   /*!< 0x001E0000 */
-#define USB_OTG_PKTSTS                          USB_OTG_PKTSTS_Msk             /*!< Packet status */
-#define USB_OTG_PKTSTS_0                        (0x1UL << USB_OTG_PKTSTS_Pos)   /*!< 0x00020000 */
-#define USB_OTG_PKTSTS_1                        (0x2UL << USB_OTG_PKTSTS_Pos)   /*!< 0x00040000 */
-#define USB_OTG_PKTSTS_2                        (0x4UL << USB_OTG_PKTSTS_Pos)   /*!< 0x00080000 */
-#define USB_OTG_PKTSTS_3                        (0x8UL << USB_OTG_PKTSTS_Pos)   /*!< 0x00100000 */
-
-#define USB_OTG_EPNUM_Pos                       (0U)                           
-#define USB_OTG_EPNUM_Msk                       (0xFUL << USB_OTG_EPNUM_Pos)    /*!< 0x0000000F */
-#define USB_OTG_EPNUM                           USB_OTG_EPNUM_Msk              /*!< Endpoint number */
-#define USB_OTG_EPNUM_0                         (0x1UL << USB_OTG_EPNUM_Pos)    /*!< 0x00000001 */
-#define USB_OTG_EPNUM_1                         (0x2UL << USB_OTG_EPNUM_Pos)    /*!< 0x00000002 */
-#define USB_OTG_EPNUM_2                         (0x4UL << USB_OTG_EPNUM_Pos)    /*!< 0x00000004 */
-#define USB_OTG_EPNUM_3                         (0x8UL << USB_OTG_EPNUM_Pos)    /*!< 0x00000008 */
-
-#define USB_OTG_FRMNUM_Pos                      (21U)                          
-#define USB_OTG_FRMNUM_Msk                      (0xFUL << USB_OTG_FRMNUM_Pos)   /*!< 0x01E00000 */
-#define USB_OTG_FRMNUM                          USB_OTG_FRMNUM_Msk             /*!< Frame number */
-#define USB_OTG_FRMNUM_0                        (0x1UL << USB_OTG_FRMNUM_Pos)   /*!< 0x00200000 */
-#define USB_OTG_FRMNUM_1                        (0x2UL << USB_OTG_FRMNUM_Pos)   /*!< 0x00400000 */
-#define USB_OTG_FRMNUM_2                        (0x4UL << USB_OTG_FRMNUM_Pos)   /*!< 0x00800000 */
-#define USB_OTG_FRMNUM_3                        (0x8UL << USB_OTG_FRMNUM_Pos)   /*!< 0x01000000 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h
index 78ca5a5a2..2de0d9cb4 100644
--- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h
+++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h
@@ -29,6 +29,14 @@
 
 #include "fsl_device_registers.h"
 
+#if !defined(USB1_BASE) && defined(USB_OTG1_BASE)
+#define USB1_BASE USB_OTG1_BASE
+#endif
+
+#if !defined(USB2_BASE) && defined(USB_OTG2_BASE)
+#define USB2_BASE USB_OTG2_BASE
+#endif
+
 static const ci_hs_controller_t _ci_controller[] =
 {
   // RT1010 and RT1020 only has 1 USB controller
diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c
index 32c2fc029..c7cc3e0e8 100644
--- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c
+++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c
@@ -34,7 +34,7 @@
 #include "device/dcd.h"
 #include "ci_hs_type.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "ci_hs_imxrt.h"
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   #include "ci_hs_lpc18_43.h"
@@ -266,6 +266,14 @@ void dcd_disconnect(uint8_t rhport)
   dcd_reg->USBCMD &= ~USBCMD_RUN_STOP;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // HELPER
 //--------------------------------------------------------------------+
diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c
index 221721b0f..d0396daea 100644
--- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c
+++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c
@@ -29,7 +29,7 @@
 // Chipidea Highspeed USB IP implement EHCI for host functionality
 
 #if CFG_TUH_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
+    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -39,7 +39,7 @@
 #include "portable/ehci/ehci_api.h"
 #include "ci_hs_type.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "ci_hs_imxrt.h"
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   #include "ci_hs_lpc18_43.h"
diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c
index 919249a09..0bb8b6e41 100644
--- a/src/portable/dialog/da146xx/dcd_da146xx.c
+++ b/src/portable/dialog/da146xx/dcd_da146xx.c
@@ -882,6 +882,14 @@ void dcd_disconnect(uint8_t rhport)
   REG_CLR_BIT(USB_MCTRL_REG, USB_NAT);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void)
 {
   return (SCB->ICSR & SCB_ICSR_VECTACTIVE_Msk) != 0;
diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c
index 665f2380b..76ba2a921 100644
--- a/src/portable/ehci/ehci.c
+++ b/src/portable/ehci/ehci.c
@@ -163,15 +163,15 @@ void hcd_port_reset(uint8_t rhport)
   regs->portsc = portsc;
 }
 
-#if 0
 void hcd_port_reset_end(uint8_t rhport)
 {
   (void) rhport;
 
+#if 0
   ehci_registers_t* regs = ehci_data.regs;
   regs->portsc_bm.port_reset = 0;
-}
 #endif
+}
 
 bool hcd_port_connect_status(uint8_t rhport)
 {
diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c
index bd8805dd3..0b75af627 100644
--- a/src/portable/espressif/esp32sx/dcd_esp32sx.c
+++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c
@@ -59,6 +59,7 @@ typedef struct {
     uint16_t queued_len;
     uint16_t max_size;
     bool short_packet;
+    uint8_t interval;
 } xfer_ctl_t;
 
 static const char *TAG = "TUSB:DCD";
@@ -240,6 +241,14 @@ void dcd_disconnect(uint8_t rhport)
   USB0.dctl |= USB_SFTDISCON_M;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 /*------------------------------------------------------------------*/
 /* DCD Endpoint port
  *------------------------------------------------------------------*/
@@ -259,6 +268,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt)
 
   xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir);
   xfer->max_size = tu_edpt_packet_size(desc_edpt);
+  xfer->interval = desc_edpt->bInterval;
 
   if (dir == TUSB_DIR_OUT) {
     out_ep[epnum].doepctl |= USB_USBACTEP1_M |
@@ -371,6 +381,13 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to
     USB0.in_ep_reg[epnum].dieptsiz = (num_packets << USB_D_PKTCNT0_S) | total_bytes;
     USB0.in_ep_reg[epnum].diepctl |= USB_D_EPENA1_M | USB_D_CNAK1_M; // Enable | CNAK
 
+    // For ISO endpoint with interval=1 set correct DATA0/DATA1 bit for next frame
+    if ((USB0.in_ep_reg[epnum].diepctl & USB_D_EPTYPE0_M) == (1 << USB_D_EPTYPE1_S) && xfer->interval == 1) {
+      // Take odd/even bit from frame counter.
+      uint32_t const odd_frame_now = (USB0.dsts & (1u << USB_SOFFN_S));
+      USB0.in_ep_reg[epnum].diepctl |= (odd_frame_now ? USB_DI_SETD0PID1 : USB_DI_SETD1PID1);
+    }
+
     // Enable fifo empty interrupt only if there are something to put in the fifo.
     if(total_bytes != 0) {
       USB0.dtknqr4_fifoemptymsk |= (1 << epnum);
@@ -379,6 +396,13 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to
     // Each complete packet for OUT xfers triggers XFRC.
     USB0.out_ep_reg[epnum].doeptsiz |= USB_PKTCNT0_M | ((xfer->max_size & USB_XFERSIZE0_V) << USB_XFERSIZE0_S);
     USB0.out_ep_reg[epnum].doepctl  |= USB_EPENA0_M | USB_CNAK0_M;
+
+    // For ISO endpoint with interval=1 set correct DATA0/DATA1 bit for next frame
+    if ((USB0.out_ep_reg[epnum].doepctl & USB_D_EPTYPE0_M) == (1 << USB_D_EPTYPE1_S) && xfer->interval == 1) {
+      // Take odd/even bit from frame counter.
+      uint32_t const odd_frame_now = (USB0.dsts & (1u << USB_SOFFN_S));
+      USB0.out_ep_reg[epnum].doepctl |= (odd_frame_now ? USB_DO_SETD0PID1 : USB_DO_SETD1PID1);
+    }
   }
   return true;
 }
diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c
index d36585592..0ba53d4d0 100644
--- a/src/portable/mentor/musb/dcd_musb.c
+++ b/src/portable/mentor/musb/dcd_musb.c
@@ -648,6 +648,14 @@ void dcd_disconnect(uint8_t rhport)
   USB0->POWER &= ~USB_POWER_SOFTCONN;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c
index 3bfd65b45..85e18e3aa 100644
--- a/src/portable/mentor/musb/hcd_musb.c
+++ b/src/portable/mentor/musb/hcd_musb.c
@@ -617,6 +617,11 @@ void hcd_port_reset(uint8_t rhport)
   _hcd.need_reset = false;
 }
 
+void hcd_port_reset_end(uint8_t rhport)
+{
+  (void) rhport;
+}
+
 tusb_speed_t hcd_port_speed_get(uint8_t rhport)
 {
   (void)rhport;
diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c
new file mode 100644
index 000000000..6cf0e6285
--- /dev/null
+++ b/src/portable/microchip/pic/dcd_pic.c
@@ -0,0 +1,786 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Koji Kitayama
+ * Copyright (c) 2022 Reimu NotMoe <[email protected]>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if CFG_TUD_ENABLED && \
+    (CFG_TUSB_MCU == OPT_MCU_PIC32MX || CFG_TUSB_MCU == OPT_MCU_PIC32MM || \
+     CFG_TUSB_MCU == OPT_MCU_PIC32MK || CFG_TUSB_MCU == OPT_MCU_PIC24 || \
+     CFG_TUSB_MCU == OPT_MCU_DSPIC33)
+
+#include <xc.h>
+
+#include "device/dcd.h"
+
+
+#if (CFG_TUSB_MCU == OPT_MCU_PIC32MX || CFG_TUSB_MCU == OPT_MCU_PIC32MM || CFG_TUSB_MCU == OPT_MCU_PIC32MK)
+
+#define TU_PIC_INT_SIZE         4
+
+#elif (CFG_TUSB_MCU == OPT_MCU_PIC24 || CFG_TUSB_MCU == OPT_MCU_DSPIC33)
+
+#define TU_PIC_INT_SIZE         2
+
+#else
+
+#error Unsupportd PIC MCU
+
+#endif
+
+
+#if TU_PIC_INT_SIZE == 4
+
+#ifndef KVA_TO_PA
+#define KVA_TO_PA(kva)    ((uint32_t)(kva) & 0x1fffffff)
+#endif
+
+#ifndef PA_TO_KVA1
+#define PA_TO_KVA1(pa)    ((uint32_t)(pa) | 0xA0000000)
+#endif
+
+#else
+
+#ifndef KVA_TO_PA
+#define KVA_TO_PA(kva)    (kva)
+#endif
+
+#ifndef PA_TO_KVA1
+#define PA_TO_KVA1(pa)    (pa)
+#endif
+
+#endif
+
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+enum {
+  TOK_PID_OUT   = 0x1u,
+  TOK_PID_IN    = 0x9u,
+  TOK_PID_SETUP = 0xDu,
+};
+
+// The BDT is 8 bytes on 32bit PICs and 4 bytes on 8/16bit PICs
+#if TU_PIC_INT_SIZE == 4
+typedef struct TU_ATTR_PACKED
+{
+  union {
+    uint32_t head;
+    struct {
+      union {
+        struct {
+          uint16_t           :  2;
+          uint16_t tok_pid   :  4;
+          uint16_t data      :  1;
+          uint16_t own       :  1;
+          uint16_t           :  8;
+        };
+        struct {
+          uint16_t           :  2;
+          uint16_t bdt_stall :  1;
+          uint16_t dts       :  1;
+          uint16_t ninc      :  1;
+          uint16_t keep      :  1;
+          uint16_t           : 10;
+        };
+      };
+      uint16_t bc : 10;
+      uint16_t    :  6;
+    };
+  };
+  uint8_t *addr;
+} buffer_descriptor_t;
+
+TU_VERIFY_STATIC( sizeof(buffer_descriptor_t) == 8, "size is not correct" );
+#else
+typedef struct TU_ATTR_PACKED
+{
+  union {
+    uint16_t head;
+
+    struct {
+      uint16_t           :  10;
+      uint16_t tok_pid   :  4;
+      uint16_t data      :  1;
+      uint16_t own       :  1;
+    };
+    struct {
+      uint16_t           :  10;
+      uint16_t bdt_stall :  1;
+      uint16_t dts       :  1;
+      uint16_t ninc      :  1;
+      uint16_t keep      :  1;
+    };
+
+    struct {
+      uint16_t bc : 10;
+      uint16_t    :  6;
+    };
+  };
+  uint8_t *addr;
+} buffer_descriptor_t;
+
+TU_VERIFY_STATIC( sizeof(buffer_descriptor_t) == 4, "size is not correct" );
+#endif
+
+
+typedef struct TU_ATTR_PACKED
+{
+  union {
+    uint32_t state;
+    struct {
+      uint32_t max_packet_size :11;
+      uint32_t                 : 5;
+      uint32_t odd             : 1;
+      uint32_t                 :15;
+    };
+  };
+  uint16_t length;
+  uint16_t remaining;
+} endpoint_state_t;
+
+TU_VERIFY_STATIC( sizeof(endpoint_state_t) == 8, "size is not correct" );
+
+typedef struct
+{
+  union {
+    /* [#EP][OUT,IN][EVEN,ODD] */
+    buffer_descriptor_t bdt[16][2][2];
+#if TU_PIC_INT_SIZE == 4
+    uint16_t            bda[256];
+#else
+    uint8_t            bda[256];
+#endif
+  };
+  TU_ATTR_ALIGNED(4) union {
+    endpoint_state_t endpoint[16][2];
+    endpoint_state_t endpoint_unified[16 * 2];
+  };
+  uint8_t setup_packet[8];
+  uint8_t addr;
+} dcd_data_t;
+
+//--------------------------------------------------------------------+
+// INTERNAL OBJECT & FUNCTION DECLARATION
+//--------------------------------------------------------------------+
+// BDT(Buffer Descriptor Table) must be 256-byte aligned
+CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd;
+
+#if TU_PIC_INT_SIZE == 4
+TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" );
+#else
+TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 256, "size is not correct" );
+#endif
+
+#if TU_PIC_INT_SIZE == 4
+typedef uint32_t ep_reg_t;
+#elif TU_PIC_INT_SIZE == 2
+typedef uint16_t ep_reg_t;
+#endif
+
+static inline volatile void *ep_addr(uint8_t rhport, uint8_t ep_num) {
+#if CFG_TUSB_MCU == OPT_MCU_PIC32MK
+  volatile void *ep_reg_base = rhport ? (&U2EP0) : (&U1EP0);
+#else
+  volatile void *ep_reg_base = &U1EP0;
+#endif
+#if TU_PIC_INT_SIZE == 4
+  const size_t offset = 0x10;
+#else
+  const size_t offset = 0x2;
+#endif
+  return ep_reg_base + offset * ep_num;
+}
+
+static inline ep_reg_t ep_read(uint8_t rhport, uint8_t ep_num) {
+  volatile ep_reg_t *ep = ep_addr(rhport, ep_num);
+  return *ep;
+}
+
+static inline void ep_write(uint8_t rhport, uint8_t ep_num, ep_reg_t val) {
+  volatile ep_reg_t *ep = ep_addr(rhport, ep_num);
+  *ep = val;
+}
+
+static inline void ep_clear(uint8_t rhport, uint8_t ep_num, ep_reg_t val) {
+#if TU_PIC_INT_SIZE == 4
+  volatile ep_reg_t *ep_clr = (ep_addr(rhport, ep_num) + 0x4);
+  *ep_clr = val;
+#else
+  ep_reg_t v = ep_read(rhport, ep_num);
+  v &= ~val;
+  ep_write(rhport, ep_num, v);
+#endif
+}
+
+static inline void ep_set(uint8_t rhport, uint8_t ep_num, ep_reg_t val) {
+#if TU_PIC_INT_SIZE == 4
+  volatile ep_reg_t *ep_s = (ep_addr(rhport, ep_num) + 0x8);
+  *ep_s = val;
+#else
+  ep_reg_t v = ep_read(rhport, ep_num);
+  v |= val;
+  ep_write(rhport, ep_num, v);
+#endif
+}
+
+static inline void intr_enable(uint8_t rhport) {
+#if CFG_TUSB_MCU == OPT_MCU_PIC32MM
+  IEC0SET = _IEC0_USBIE_MASK;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MX
+  IEC1SET = _IEC1_USBIE_MASK;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MK
+  if (rhport == 0)
+    IEC1SET = _IEC1_USB1IE_MASK;
+  else
+    IEC7SET = _IEC7_USB2IE_MASK;
+#elif (CFG_TUSB_MCU == OPT_MCU_PIC24) || (CFG_TUSB_MCU == OPT_MCU_DSPIC33)
+  IEC5bits.USB1IE = 1;
+#endif
+}
+
+static inline void intr_disable(uint8_t rhport) {
+#if CFG_TUSB_MCU == OPT_MCU_PIC32MM
+  IEC0CLR = _IEC0_USBIE_MASK;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MX
+  IEC1CLR = _IEC1_USBIE_MASK;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MK
+  if (rhport == 0)
+    IEC1CLR = _IEC1_USB1IE_MASK;
+  else
+    IEC7CLR = _IEC7_USB2IE_MASK;
+#elif (CFG_TUSB_MCU == OPT_MCU_PIC24) || (CFG_TUSB_MCU == OPT_MCU_DSPIC33)
+  IEC5bits.USB1IE = 0;
+#endif
+}
+
+static inline int intr_is_enabled(uint8_t rhport) {
+#if CFG_TUSB_MCU == OPT_MCU_PIC32MM
+  return IEC0bits.USBIE;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MX
+  return IEC1bits.USBIE;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MK
+  if (rhport == 0)
+    return IEC1bits.USB1IE;
+  else
+    return IEC7bits.USB2IE;
+#elif (CFG_TUSB_MCU == OPT_MCU_PIC24) || (CFG_TUSB_MCU == OPT_MCU_DSPIC33)
+  return IEC5bits.USB1IE;
+#endif
+}
+
+static inline void intr_clear(uint8_t rhport) {
+#if CFG_TUSB_MCU == OPT_MCU_PIC32MM
+  IFS0CLR = _IFS0_USBIF_MASK;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MX
+  IFS1CLR = _IFS1_USBIF_MASK;
+#elif CFG_TUSB_MCU == OPT_MCU_PIC32MK
+  if (rhport == 0)
+    IFS1CLR = _IFS1_USB1IF_MASK;
+  else
+    IFS7CLR = _IFS7_USB2IF_MASK;
+#elif (CFG_TUSB_MCU == OPT_MCU_PIC24) || (CFG_TUSB_MCU == OPT_MCU_DSPIC33)
+  IFS5bits.USB1IF = 0;
+#endif
+}
+
+static void prepare_next_setup_packet(uint8_t rhport)
+{
+  const unsigned out_odd = _dcd.endpoint[0][0].odd;
+  const unsigned in_odd  = _dcd.endpoint[0][1].odd;
+  TU_ASSERT(0 == _dcd.bdt[0][0][out_odd].own, );
+
+  _dcd.bdt[0][0][out_odd].data     = 0;
+  _dcd.bdt[0][0][out_odd ^ 1].data = 1;
+  _dcd.bdt[0][1][in_odd].data      = 1;
+  _dcd.bdt[0][1][in_odd ^ 1].data  = 0;
+  dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT),
+          _dcd.setup_packet, sizeof(_dcd.setup_packet));
+}
+
+static void process_stall(uint8_t rhport)
+{
+  for (int i = 0; i < 16; ++i) {
+    unsigned const endpt = ep_read(rhport, i);
+
+    if (endpt & _U1EP0_EPSTALL_MASK) {
+      // prepare next setup if endpoint0
+      if ( i == 0 ) prepare_next_setup_packet(rhport);
+
+      // clear stall bit
+      ep_clear(rhport, i, _U1EP0_EPSTALL_MASK);
+    }
+  }
+}
+
+static void process_tokdne(uint8_t rhport)
+{
+  ep_reg_t s = U1STAT;
+
+  U1IR = _U1IR_TRNIF_MASK;
+
+  uint8_t epnum = (s >> _U1STAT_ENDPT0_POSITION);
+  uint8_t dir   = (s & _U1STAT_DIR_MASK) >> _U1STAT_DIR_POSITION;
+  unsigned odd  = (s & _U1STAT_PPBI_MASK) ? 1 : 0;
+
+  buffer_descriptor_t *bd = (buffer_descriptor_t *)&_dcd.bda[s];
+  endpoint_state_t    *ep = &_dcd.endpoint_unified[s >> 3];
+
+  /* fetch pid before discarded by the next steps */
+  const unsigned pid = bd->tok_pid;
+
+  /* reset values for a next transfer */
+  bd->bdt_stall = 0;
+  bd->dts       = 1;
+  bd->ninc      = 0;
+  bd->keep      = 0;
+  /* update the odd variable to prepare for the next transfer */
+  ep->odd       = odd ^ 1;
+  if (pid == TOK_PID_SETUP) {
+    dcd_event_setup_received(rhport, (uint8_t *)PA_TO_KVA1(bd->addr), true);
+#if TU_PIC_INT_SIZE == 4
+    U1CONCLR = _U1CON_PKTDIS_TOKBUSY_MASK;
+#else
+    U1CONbits.PKTDIS = 0;
+#endif
+    return;
+  }
+
+  const unsigned bc = bd->bc;
+  const unsigned remaining = ep->remaining - bc;
+  if (remaining && bc == ep->max_packet_size) {
+    /* continue the transferring consecutive data */
+    ep->remaining = remaining;
+    const int next_remaining = remaining - ep->max_packet_size;
+    if (next_remaining > 0) {
+      /* prepare to the after next transfer */
+      bd->addr += ep->max_packet_size * 2;
+      bd->bc    = next_remaining > ep->max_packet_size ? ep->max_packet_size: next_remaining;
+      bd->own   = 1; /* the own bit must set after addr */
+    }
+    return;
+  }
+  const unsigned length = ep->length;
+  dcd_event_xfer_complete(rhport,
+        tu_edpt_addr(epnum, dir),
+        length - remaining, XFER_RESULT_SUCCESS, true);
+  if (0 == epnum && 0 == length) {
+    /* After completion a ZLP of control transfer,
+     * it prepares for the next steup transfer. */
+    if (_dcd.addr) {
+      /* When the transfer was the SetAddress,
+       * the device address should be updated here. */
+      U1ADDR = _dcd.addr;
+      _dcd.addr  = 0;
+    }
+    prepare_next_setup_packet(rhport);
+  }
+}
+
+static void process_bus_reset(uint8_t rhport)
+{
+#if TU_PIC_INT_SIZE == 4
+  U1PWRCCLR = _U1PWRC_USUSPEND_MASK;
+  U1CONSET = _U1CON_PPBRST_MASK;
+#else
+  U1PWRCbits.USUSPND = 0;
+  U1CONbits.PPBRST = 1;
+#endif
+  U1ADDR = 0;
+
+  U1IE = _U1IE_URSTIE_MASK | _U1IE_TRNIE_MASK | _U1IE_IDLEIE_MASK |
+         _U1IE_UERRIE_MASK | _U1IE_STALLIE_MASK;
+
+  U1EP0 = _U1EP0_EPHSHK_MASK | _U1EP0_EPRXEN_MASK | _U1EP0_EPTXEN_MASK;
+
+  for (unsigned i = 1; i < 16; ++i) {
+    ep_write(rhport, i, 0);
+  }
+
+  buffer_descriptor_t *bd = _dcd.bdt[0][0];
+  for (unsigned i = 0; i < sizeof(_dcd.bdt)/sizeof(*bd); ++i, ++bd) {
+    bd->head = 0;
+  }
+  const endpoint_state_t ep0 = {
+    .max_packet_size = CFG_TUD_ENDPOINT0_SIZE,
+    .odd             = 0,
+    .length          = 0,
+    .remaining       = 0,
+  };
+  _dcd.endpoint[0][0] = ep0;
+  _dcd.endpoint[0][1] = ep0;
+  tu_memclr(_dcd.endpoint[1], sizeof(_dcd.endpoint) - sizeof(_dcd.endpoint[0]));
+  _dcd.addr = 0;
+  prepare_next_setup_packet(rhport);
+#if TU_PIC_INT_SIZE == 4
+  U1CONCLR = _U1CON_PPBRST_MASK;
+#else
+  U1CONbits.PPBRST = 0;
+#endif
+  dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
+}
+
+static void process_bus_sleep(uint8_t rhport)
+{
+  // Enable resume & disable suspend interrupt
+  dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true);
+}
+
+static void process_bus_resume(uint8_t rhport)
+{
+  // Enable suspend & disable resume interrupt
+#if TU_PIC_INT_SIZE == 4
+  U1PWRCCLR = _U1PWRC_USUSPEND_MASK;
+  U1IECLR = _U1IE_RESUMEIE_MASK;
+  U1IESET = _U1IE_IDLEIE_MASK;
+#else
+  U1PWRCbits.USUSPND = 0;
+  U1IEbits.RESUMEIE = 0;
+  U1IEbits.IDLEIE = 1;
+#endif
+
+  dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true);
+}
+
+/*------------------------------------------------------------------*/
+/* Device API
+ *------------------------------------------------------------------*/
+void dcd_init(uint8_t rhport)
+{
+  intr_disable(rhport);
+  intr_clear(rhport);
+
+#if CFG_TUSB_MCU == OPT_MCU_PIC32MM
+  TRISBbits.TRISB6 = 1;
+#endif
+
+  tu_memclr(&_dcd, sizeof(_dcd));
+
+#if TU_PIC_INT_SIZE == 4
+  U1PWRCSET = _U1PWRC_USBPWR_MASK;
+#else
+  U1PWRCbits.USBPWR = 1;
+#endif
+  
+#if TU_PIC_INT_SIZE == 4
+  uint32_t bdt_phys = KVA_TO_PA((uintptr_t)_dcd.bdt);
+
+  U1BDTP1 = (uint8_t)(bdt_phys >>  8);
+  U1BDTP2 = (uint8_t)(bdt_phys >> 16);
+  U1BDTP3 = (uint8_t)(bdt_phys >> 24);
+#else
+  U1BDTP1 = (uint8_t)((uint16_t)(void *)_dcd.bdt >> 8);
+
+  U1CNFG1bits.PPB = 2;
+#endif
+
+  U1IE = _U1IE_URSTIE_MASK;
+
+  dcd_connect(rhport);
+}
+
+void dcd_int_enable(uint8_t rhport)
+{
+  intr_enable(rhport);
+}
+
+void dcd_int_disable(uint8_t rhport)
+{
+  intr_disable(rhport);
+}
+
+void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
+{
+  _dcd.addr = dev_addr & 0x7F;
+  /* Response with status first before changing device address */
+  dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
+}
+
+void dcd_remote_wakeup(uint8_t rhport)
+{
+#if TU_PIC_INT_SIZE == 4
+  U1CONSET = _U1CON_RESUME_MASK;
+#else
+  U1CONbits.RESUME = 1;
+#endif
+  unsigned cnt = 25000000 / 1000;
+  while (cnt--) asm volatile("nop");
+
+#if TU_PIC_INT_SIZE == 4
+  U1CONCLR = _U1CON_RESUME_MASK;
+#else
+  U1CONbits.RESUME = 0;
+#endif
+}
+
+void dcd_connect(uint8_t rhport)
+{
+  while (!U1CONbits.USBEN) {
+#if TU_PIC_INT_SIZE == 4
+    U1CONSET = _U1CON_USBEN_SOFEN_MASK;
+#else
+    U1CONbits.USBEN = 1;
+#endif
+  }
+}
+
+void dcd_disconnect(uint8_t rhport)
+{
+  U1CON = 0;
+}
+
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+}
+
+//--------------------------------------------------------------------+
+// Endpoint API
+//--------------------------------------------------------------------+
+bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
+{
+  const unsigned ep_addr  = ep_desc->bEndpointAddress;
+  const unsigned epn      = tu_edpt_number(ep_addr);
+  const unsigned dir      = tu_edpt_dir(ep_addr);
+  const unsigned xfer     = ep_desc->bmAttributes.xfer;
+  endpoint_state_t *ep    = &_dcd.endpoint[epn][dir];
+  const unsigned odd      = ep->odd;
+  buffer_descriptor_t *bd = _dcd.bdt[epn][dir];
+
+  /* No support for control transfer */
+  TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL));
+
+  ep->max_packet_size = tu_edpt_packet_size(ep_desc);
+
+
+  unsigned val = _U1EP0_EPCONDIS_MASK;
+  val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? _U1EP0_EPHSHK_MASK : 0;
+  val |= dir ? _U1EP0_EPTXEN_MASK : _U1EP0_EPRXEN_MASK;
+
+  ep_reg_t tmp = ep_read(rhport, epn);
+  tmp |= val;
+  ep_write(rhport, epn, tmp);
+
+  if (xfer != TUSB_XFER_ISOCHRONOUS) {
+    bd[odd].dts      = 1;
+    bd[odd].data     = 0;
+    bd[odd ^ 1].dts  = 1;
+    bd[odd ^ 1].data = 1;
+  }
+
+  return true;
+}
+
+void dcd_edpt_close_all(uint8_t rhport)
+{
+  const unsigned ie = intr_is_enabled(rhport);
+  intr_disable(rhport);
+
+  for (unsigned i = 1; i < 16; ++i) {
+    ep_write(rhport, i, 0);
+  }
+
+  if (ie) intr_enable(rhport);
+
+  buffer_descriptor_t *bd = _dcd.bdt[1][0];
+  for (unsigned i = 2; i < sizeof(_dcd.bdt)/sizeof(*bd); ++i, ++bd) {
+    bd->head = 0;
+  }
+  endpoint_state_t *ep = &_dcd.endpoint[1][0];
+  for (unsigned i = 2; i < sizeof(_dcd.endpoint)/sizeof(*ep); ++i, ++ep) {
+    /* Clear except the odd */
+    ep->max_packet_size = 0;
+    ep->length          = 0;
+    ep->remaining       = 0;
+  }
+}
+
+void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr)
+{
+  const unsigned epn      = tu_edpt_number(ep_addr);
+  const unsigned dir      = tu_edpt_dir(ep_addr);
+  endpoint_state_t *ep    = &_dcd.endpoint[epn][dir];
+  buffer_descriptor_t *bd = _dcd.bdt[epn][dir];
+  const unsigned msk      = dir ? _U1EP0_EPTXEN_MASK : _U1EP0_EPRXEN_MASK;
+  const unsigned ie       = intr_is_enabled(rhport);
+
+  intr_disable(rhport);
+
+  ep_clear(rhport, epn, msk);
+
+  ep->max_packet_size = 0;
+  ep->length          = 0;
+  ep->remaining       = 0;
+  bd[0].head          = 0;
+  bd[1].head          = 0;
+
+  if (ie) intr_enable(rhport);
+}
+
+bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
+{
+
+  const unsigned epn      = tu_edpt_number(ep_addr);
+  const unsigned dir      = tu_edpt_dir(ep_addr);
+  endpoint_state_t    *ep = &_dcd.endpoint[epn][dir];
+  buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][ep->odd];
+  TU_ASSERT(0 == bd->own);
+
+  const unsigned ie       = intr_is_enabled(rhport);
+
+  intr_disable(rhport);
+
+  ep->length    = total_bytes;
+  ep->remaining = total_bytes;
+
+  const unsigned mps = ep->max_packet_size;
+  if (total_bytes > mps) {
+    buffer_descriptor_t *next = ep->odd ? bd - 1: bd + 1;
+    /* When total_bytes is greater than the max packet size,
+     * it prepares to the next transfer to avoid NAK in advance. */
+    next->bc   = total_bytes >= 2 * mps ? mps: total_bytes - mps;
+    next->addr = (uint8_t *)KVA_TO_PA(buffer + mps);
+    next->own  = 1;
+  }
+  bd->bc   = total_bytes >= mps ? mps: total_bytes;
+  bd->addr = (uint8_t *)KVA_TO_PA(buffer);
+  bd->own  = 1; /* This bit must be set last */
+
+  if (ie) intr_enable(rhport);
+
+  return true;
+}
+
+void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
+{
+  (void) rhport;
+  const unsigned epn = tu_edpt_number(ep_addr);
+
+  if (0 == epn) {
+    ep_set(rhport, epn, _U1EP0_EPSTALL_MASK);
+  } else {
+    const unsigned dir      = tu_edpt_dir(ep_addr);
+    const unsigned odd      = _dcd.endpoint[epn][dir].odd;
+    buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][odd];
+    TU_ASSERT(0 == bd->own,);
+
+    const unsigned ie       = intr_is_enabled(rhport);
+
+    intr_disable(rhport);
+
+    bd->bdt_stall = 1;
+    bd->own       = 1; /* This bit must be set last */
+
+    if (ie) intr_enable(rhport);
+  }
+}
+
+void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
+{
+  const unsigned epn      = tu_edpt_number(ep_addr);
+  TU_VERIFY(epn,);
+  const unsigned dir      = tu_edpt_dir(ep_addr);
+  const unsigned odd      = _dcd.endpoint[epn][dir].odd;
+  buffer_descriptor_t *bd = _dcd.bdt[epn][dir];
+  TU_VERIFY(bd[odd].own,);
+
+  const unsigned ie       = intr_is_enabled(rhport);
+
+  intr_disable(rhport);
+
+  bd[odd].own = 0;
+
+  // clear stall
+  bd[odd].bdt_stall  = 0;
+
+  // Reset data toggle
+  bd[odd    ].data = 0;
+  bd[odd ^ 1].data = 1;
+
+  // We already cleared this in ISR, but just clear it here to be safe
+  const unsigned endpt = ep_read(rhport, epn);
+  if (endpt & _U1EP0_EPSTALL_MASK) {
+    ep_clear(rhport, endpt, _U1EP0_EPSTALL_MASK);
+  }
+
+  if (ie) intr_enable(rhport);
+}
+
+//--------------------------------------------------------------------+
+// ISR
+//--------------------------------------------------------------------+
+void dcd_int_handler(uint8_t rhport)
+{
+  uint32_t is  = U1IR;
+  uint32_t msk = U1IE;
+
+  U1IR = is & ~msk;
+  is &= msk;
+
+  if (is & _U1IR_UERRIF_MASK) {
+    uint32_t es = U1EIR;
+    U1EIR = es;
+    U1IR   = is; /* discard any pending events */
+  }
+
+  if (is & _U1IR_URSTIF_MASK) {
+    U1IR = is; /* discard any pending events */
+    process_bus_reset(rhport);
+  }
+
+  if (is & _U1IR_IDLEIF_MASK) {
+    // Note Host usually has extra delay after bus reset (without SOF), which could falsely
+    // detected as Sleep event. Though usbd has debouncing logic so we are good
+    U1IR = _U1IR_IDLEIF_MASK;
+    process_bus_sleep(rhport);
+  }
+
+  if (is & _U1IR_RESUMEIF_MASK) {
+    U1IR = _U1IR_RESUMEIF_MASK;
+    process_bus_resume(rhport);
+  }
+
+  if (is & _U1IR_SOFIF_MASK) {
+    U1IR = _U1IR_SOFIF_MASK;
+    dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true);
+  }
+
+  if (is & _U1IR_STALLIF_MASK) {
+    U1IR = _U1IR_STALLIF_MASK;
+    process_stall(rhport);
+  }
+
+  if (is & _U1IR_TRNIF_MASK) {
+    process_tokdne(rhport);
+  }
+
+  intr_clear(rhport);
+}
+
+#endif
diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c
index 7d48f755b..9ad755670 100644
--- a/src/portable/microchip/pic32mz/dcd_pic32mz.c
+++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c
@@ -186,6 +186,14 @@ void dcd_disconnect(uint8_t rhport)
   USB_REGS->POWERbits.SOFTCONN = 1;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void)
 {
   return (_CP0_GET_STATUS() & (_CP0_STATUS_EXL_MASK | _CP0_STATUS_IPL_MASK)) != 0;
@@ -530,6 +538,7 @@ static void ep0_handle_rx(void)
 
   transferred = rx_fifo_read(0, xfer->buffer + xfer->transferred);
   xfer->transferred += transferred;
+  TU_ASSERT(xfer->transferred <= xfer->total_len,);
   if (transferred < xfer->max_packet_size || xfer->transferred == xfer->total_len)
   {
     ep0_set_stage(EP0_STAGE_DATA_OUT_COMPLETE);
@@ -560,8 +569,10 @@ static void epn_handle_rx_int(uint8_t epnum)
     transferred = rx_fifo_read(epnum, xfer->buffer + xfer->transferred);
     USB_REGS->EPCSR[epnum].RXCSRL_HOSTbits.RXPKTRDY = 0;
     xfer->transferred += transferred;
+    TU_ASSERT(xfer->transferred <= xfer->total_len,);
     if (transferred < xfer->max_packet_size || xfer->transferred == xfer->total_len)
     {
+      USB_REGS->INTRRXEbits.w &= ~(1u << epnum);
       xfer_complete(xfer, XFER_RESULT_SUCCESS, true);
     }
   }
@@ -579,6 +590,7 @@ static void epn_handle_tx_int(uint8_t epnum)
   else
   {
     xfer->transferred += xfer->last_packet_size;
+    TU_ASSERT(xfer->transferred <= xfer->total_len,);
     if (xfer->last_packet_size < xfer->max_packet_size || xfer->transferred == xfer->total_len)
     {
       xfer->last_packet_size = 0;
@@ -689,7 +701,7 @@ void dcd_int_handler(uint8_t rhport)
   int i;
   uint8_t mask;
   __USBCSR2bits_t csr2_bits;
-  uint16_t rxints = USB_REGS->INTRRX;
+  uint16_t rxints = USB_REGS->INTRRX & USB_REGS->INTRRXEbits.w;
   uint16_t txints = USB_REGS->INTRTX;
   csr2_bits = USBCSR2bits;
   (void) rhport;
diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c
index c4ee6f2f5..976d3dfd0 100644
--- a/src/portable/microchip/samd/dcd_samd.c
+++ b/src/portable/microchip/samd/dcd_samd.c
@@ -180,6 +180,14 @@ void dcd_connect(uint8_t rhport)
    USB->DEVICE.CTRLB.reg &= ~USB_DEVICE_CTRLB_DETACH;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 /*------------------------------------------------------------------*/
 /* DCD Endpoint port
  *------------------------------------------------------------------*/
@@ -214,14 +222,14 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
   UsbDeviceDescBank* bank = &sram_registers[epnum][dir];
   uint32_t size_value = 0;
   while (size_value < 7) {
-    if (1 << (size_value + 3) == tu_edpt_packet_size(desc_edpt)) {
+    if (1 << (size_value + 3) >= tu_edpt_packet_size(desc_edpt)) {
       break;
     }
     size_value++;
   }
 
   // unsupported endpoint size
-  if ( size_value == 7 && tu_edpt_packet_size(desc_edpt) != 1023 ) return false;
+  if ( size_value == 7 && tu_edpt_packet_size(desc_edpt) > 1023 ) return false;
 
   bank->PCKSIZE.bit.SIZE = size_value;
 
@@ -242,6 +250,13 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
   return true;
 }
 
+void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) {
+  (void) rhport;
+  (void) ep_addr;
+
+  // TODO: implement if necessary?
+}
+
 void dcd_edpt_close_all (uint8_t rhport)
 {
   (void) rhport;
@@ -271,14 +286,14 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
   {
     bank->PCKSIZE.bit.MULTI_PACKET_SIZE = total_bytes;
     bank->PCKSIZE.bit.BYTE_COUNT = 0;
-    ep->EPSTATUSCLR.reg |= USB_DEVICE_EPSTATUSCLR_BK0RDY;
-    ep->EPINTFLAG.reg |= USB_DEVICE_EPINTFLAG_TRFAIL0;
+    ep->EPSTATUSCLR.reg = USB_DEVICE_EPSTATUSCLR_BK0RDY;
+    ep->EPINTFLAG.reg = USB_DEVICE_EPINTFLAG_TRFAIL0;
   } else
   {
     bank->PCKSIZE.bit.MULTI_PACKET_SIZE = 0;
     bank->PCKSIZE.bit.BYTE_COUNT = total_bytes;
-    ep->EPSTATUSSET.reg |= USB_DEVICE_EPSTATUSSET_BK1RDY;
-    ep->EPINTFLAG.reg |= USB_DEVICE_EPINTFLAG_TRFAIL1;
+    ep->EPSTATUSSET.reg = USB_DEVICE_EPSTATUSSET_BK1RDY;
+    ep->EPINTFLAG.reg = USB_DEVICE_EPINTFLAG_TRFAIL1;
   }
 
   return true;
diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c
index 2e9854153..814e680fb 100644
--- a/src/portable/microchip/samg/dcd_samg.c
+++ b/src/portable/microchip/samg/dcd_samg.c
@@ -210,6 +210,14 @@ void dcd_disconnect(uint8_t rhport)
   UDP->UDP_TXVC = UDP_TXVC_TXVDIS_Msk;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c
index a82f29a88..7507c0f69 100644
--- a/src/portable/microchip/samx7x/dcd_samx7x.c
+++ b/src/portable/microchip/samx7x/dcd_samx7x.c
@@ -191,6 +191,14 @@ void dcd_disconnect(uint8_t rhport)
   USB_REG->DEVCTRL &=~(DEVCTRL_ADDEN | DEVCTRL_UADD);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 static tusb_speed_t get_speed(void)
 {
   switch (USB_REG->SR & SR_SPEED) {
diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c
index 1edcd8458..39b09db68 100644
--- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c
+++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c
@@ -305,6 +305,14 @@ void dcd_disconnect(uint8_t rhport)
   USB_OTG_FS->CTL      = 0;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c
index bc145eaa4..ca37d799f 100644
--- a/src/portable/nordic/nrf5x/dcd_nrf5x.c
+++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c
@@ -28,6 +28,7 @@
 
 #if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_NRF5X
 
+#include <stdatomic.h>
 #include "nrf.h"
 #include "nrf_clock.h"
 #include "nrf_power.h"
@@ -72,6 +73,7 @@ typedef struct
   // nRF will auto accept OUT packet after DMA is done
   // indicate packet is already ACK
   volatile bool data_received;
+  volatile bool started;
 
   // Set to true when data was transferred from RAM to ISO IN output buffer.
   // New data can be put in ISO IN output buffer after SOF.
@@ -79,9 +81,6 @@ typedef struct
 
 } xfer_td_t;
 
-static osal_mutex_def_t dcd_mutex_def;
-static osal_mutex_t dcd_mutex;
-
 // Data for managing dcd
 static struct
 {
@@ -90,7 +89,7 @@ static struct
   xfer_td_t xfer[EP_CBI_COUNT + 1][2];
 
   // nRF can only carry one DMA at a time, this is used to guard the access to EasyDMA
-  volatile bool dma_running;
+  atomic_bool dma_running;
 }_dcd;
 
 /*------------------------------------------------------------------*/
@@ -121,8 +120,6 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void)
 // helper to start DMA
 static void start_dma(volatile uint32_t* reg_startep)
 {
-  _dcd.dma_running = true;
-
   (*reg_startep) = 1;
   __ISB(); __DSB();
 
@@ -131,50 +128,18 @@ static void start_dma(volatile uint32_t* reg_startep)
   // Therefore dma_pending is corrected right away
   if ( (reg_startep == &NRF_USBD->TASKS_EP0STATUS) || (reg_startep == &NRF_USBD->TASKS_EP0RCVOUT) )
   {
-    _dcd.dma_running = false;
+    atomic_flag_clear(&_dcd.dma_running);
   }
 }
 
-// only 1 EasyDMA can be active at any time
-// TODO use Cortex M4 LDREX and STREX command (atomic) to have better mutex access to EasyDMA
-// since current implementation does not 100% guarded against race condition
 static void edpt_dma_start(volatile uint32_t* reg_startep)
 {
-  // Called in critical section i.e within USB ISR, or USB/Global interrupt disabled
-  if ( is_in_isr() || __get_PRIMASK() || !NVIC_GetEnableIRQ(USBD_IRQn) )
+  if ( atomic_flag_test_and_set(&_dcd.dma_running) )
   {
-    if (_dcd.dma_running)
-    {
-      //use usbd task to defer later
-      usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true);
-    }else
-    {
-      start_dma(reg_startep);
-    }
+    usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true);
   }else
   {
-    // Called in non-critical thread-mode, should be 99% of the time.
-    // Should be safe to blocking wait until previous DMA transfer complete
-    uint8_t const rhport = 0;
-    bool started = false;
-    osal_mutex_lock(dcd_mutex, OSAL_TIMEOUT_WAIT_FOREVER);
-    while(!started)
-    {
-      // LDREX/STREX may be needed in form of std atomic (required C11) or
-      // use osal mutex to guard against multiple core MCUs such as nRF53
-      dcd_int_disable(rhport);
-
-      if ( !_dcd.dma_running )
-      {
-        start_dma(reg_startep);
-        started = true;
-      }
-
-      dcd_int_enable(rhport);
-
-      // osal_yield();
-    }
-    osal_mutex_unlock(dcd_mutex);
+    start_dma(reg_startep);
   }
 }
 
@@ -182,7 +147,7 @@ static void edpt_dma_start(volatile uint32_t* reg_startep)
 static void edpt_dma_end(void)
 {
   TU_ASSERT(_dcd.dma_running, );
-  _dcd.dma_running = false;
+  atomic_flag_clear(&_dcd.dma_running);
 }
 
 // helper getting td
@@ -191,12 +156,26 @@ static inline xfer_td_t* get_td(uint8_t epnum, uint8_t dir)
   return &_dcd.xfer[epnum][dir];
 }
 
+static void xact_out_dma(uint8_t epnum);
+// Function wraps xact_out_dma which wants uint8_t while usbd_defer_func wants void (*)(void *)
+static void xact_out_dma_wrapper(void *epnum)
+{
+  xact_out_dma((uint8_t)((uintptr_t)epnum));
+}
+
 // Start DMA to move data from Endpoint -> RAM
 static void xact_out_dma(uint8_t epnum)
 {
   xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT);
   uint32_t xact_len;
 
+  // DMA can't be active during read of SIZE.EPOUT or SIZE.ISOOUT, so try to lock,
+  // If already running deffer call regardless if it was called from ISR or task,
+  if ( atomic_flag_test_and_set(&_dcd.dma_running) )
+  {
+    usbd_defer_func((osal_task_func_t)xact_out_dma_wrapper, (void *)(uint32_t)epnum, is_in_isr());
+    return;
+  }
   if (epnum == EP_ISO_NUM)
   {
     xact_len = NRF_USBD->SIZE.ISOOUT;
@@ -204,6 +183,7 @@ static void xact_out_dma(uint8_t epnum)
     if (xact_len & USBD_SIZE_ISOOUT_ZERO_Msk)
     {
       xact_len = 0;
+      atomic_flag_clear(&_dcd.dma_running);
     }
     else
     {
@@ -211,7 +191,7 @@ static void xact_out_dma(uint8_t epnum)
       NRF_USBD->ISOOUT.PTR = (uint32_t) xfer->buffer;
       NRF_USBD->ISOOUT.MAXCNT = xact_len;
 
-      edpt_dma_start(&NRF_USBD->TASKS_STARTISOOUT);
+      start_dma(&NRF_USBD->TASKS_STARTISOOUT);
     }
   }
   else
@@ -223,7 +203,7 @@ static void xact_out_dma(uint8_t epnum)
     NRF_USBD->EPOUT[epnum].PTR = (uint32_t) xfer->buffer;
     NRF_USBD->EPOUT[epnum].MAXCNT = xact_len;
 
-    edpt_dma_start(&NRF_USBD->TASKS_STARTEPOUT[epnum]);
+    start_dma(&NRF_USBD->TASKS_STARTEPOUT[epnum]);
   }
 }
 
@@ -248,7 +228,6 @@ static void xact_in_dma(uint8_t epnum)
 void dcd_init (uint8_t rhport)
 {
   TU_LOG1("dcd init\r\n");
-  dcd_mutex = osal_mutex_create(&dcd_mutex_def);
   (void) rhport;
 }
 
@@ -307,6 +286,14 @@ void dcd_connect(uint8_t rhport)
   NRF_USBD->USBPULLUP = 1;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
@@ -451,6 +438,7 @@ void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr)
     // When both ISO endpoint are close there is no need for SOF any more.
     if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_IN].mps + _dcd.xfer[EP_ISO_NUM][TUSB_DIR_OUT].mps == 0) NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk;
   }
+  _dcd.xfer[epnum][dir].started = false;
   __ISB(); __DSB();
 }
 
@@ -463,17 +451,10 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
 
   xfer_td_t* xfer = get_td(epnum, dir);
 
-  if (!is_in_isr()) {
-    osal_mutex_lock(dcd_mutex, OSAL_TIMEOUT_WAIT_FOREVER);
-    dcd_int_disable(rhport);
-  }
+  TU_ASSERT(!xfer->started);
   xfer->buffer     = buffer;
   xfer->total_len  = total_bytes;
   xfer->actual_len = 0;
-  if (!is_in_isr()) {
-    dcd_int_enable(rhport);
-    osal_mutex_unlock(dcd_mutex);
-  }
 
   // Control endpoint with zero-length packet and opposite direction to 1st request byte --> status stage
   bool const control_status = (epnum == 0 && total_bytes == 0 && dir != tu_edpt_dir(NRF_USBD->BMREQUESTTYPE));
@@ -488,13 +469,20 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
   }
   else if ( dir == TUSB_DIR_OUT )
   {
+    xfer->started = true;
     if ( epnum == 0 )
     {
       // Accept next Control Out packet. TASKS_EP0RCVOUT also require EasyDMA
       edpt_dma_start(&NRF_USBD->TASKS_EP0RCVOUT);
     }else
     {
-      if ( xfer->data_received && xfer->total_len > xfer->actual_len)
+      // started just set, it could start DMA transfer if interrupt was trigger after this line
+      // code only needs to start transfer (from Endpoint to RAM) when data_received was set
+      // before started was set. If started is NOT set but data_received is, it means that
+      // current transfer was already finished and next data is already present in endpoint and
+      // can be consumed by future transfer
+      __ISB(); __DSB();
+      if ( xfer->data_received && xfer->started )
       {
         // Data is already received previously
         // start DMA to copy to SRAM
@@ -777,7 +765,7 @@ void dcd_int_handler(uint8_t rhport)
     if ( tu_bit_test(int_status, USBD_INTEN_ENDEPOUT0_Pos+epnum))
     {
       xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT);
-      uint8_t const xact_len = NRF_USBD->EPOUT[epnum].AMOUNT;
+      uint16_t const xact_len = NRF_USBD->EPOUT[epnum].AMOUNT;
 
       xfer->buffer     += xact_len;
       xfer->actual_len += xact_len;
@@ -796,7 +784,9 @@ void dcd_int_handler(uint8_t rhport)
         }
       }else
       {
+        TU_ASSERT(xfer->started,);
         xfer->total_len = xfer->actual_len;
+        xfer->started = false;
 
         // CBI OUT complete
         dcd_event_xfer_complete(0, epnum, xfer->actual_len, XFER_RESULT_SUCCESS, true);
@@ -849,7 +839,7 @@ void dcd_int_handler(uint8_t rhport)
       {
         xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT);
 
-        if (xfer->actual_len < xfer->total_len)
+        if ( xfer->started && xfer->actual_len < xfer->total_len )
         {
           xact_out_dma(epnum);
         }else
diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c
index 694766613..2fdc05f36 100644
--- a/src/portable/nuvoton/nuc120/dcd_nuc120.c
+++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c
@@ -497,4 +497,12 @@ void dcd_connect(uint8_t rhport)
   usb_attach();
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 #endif
diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c
index 88d514bce..a56b5f8e8 100644
--- a/src/portable/nuvoton/nuc121/dcd_nuc121.c
+++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c
@@ -551,4 +551,12 @@ void dcd_connect(uint8_t rhport)
   usb_attach();
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 #endif
diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c
index 498977561..886720e33 100644
--- a/src/portable/nuvoton/nuc505/dcd_nuc505.c
+++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c
@@ -720,4 +720,12 @@ void dcd_connect(uint8_t rhport)
   usb_attach();
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 #endif
diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c
index 4c7737103..13eb105cd 100644
--- a/src/portable/nxp/khci/dcd_khci.c
+++ b/src/portable/nxp/khci/dcd_khci.c
@@ -328,6 +328,14 @@ void dcd_disconnect(uint8_t rhport)
   KHCI->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
index d2cce2db3..0894a5eeb 100644
--- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
+++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
@@ -228,6 +228,14 @@ void dcd_disconnect(uint8_t rhport)
   sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 0);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // CONTROL HELPER
 //--------------------------------------------------------------------+
diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
index 55d872dc0..9b490c48c 100644
--- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
+++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
@@ -78,8 +78,10 @@ typedef struct {
 
 // Max nbytes for each control/bulk/interrupt transfer
 enum {
-  NBYTES_CBI_FULLSPEED_MAX = 64,
-  NBYTES_CBI_HIGHSPEED_MAX = 32767 // can be up to all 15-bit, but only tested with 4096
+  NBYTES_ISO_FS_MAX = 1023, // FS ISO
+  NBYTES_ISO_HS_MAX = 1024, // HS ISO
+  NBYTES_CBI_FS_MAX = 64, // FS control/bulk/interrupt
+  NBYTES_CBI_HS_MAX = 32767 // can be up to all 15-bit, but only tested with 4096
 };
 
 enum {
@@ -112,6 +114,8 @@ enum {
 typedef union TU_ATTR_PACKED
 {
   // Full and High speed has different bit layout for buffer_offset and nbytes
+  // TODO FS/HS layout depends on the max speed of controller e.g
+  // lpc55s69 PORT0 is only FS but actually has the same layout as HS on port1
 
   // Buffer (aligned 64) = DATABUFSTART [31:22]  | buffer_offset [21:6]
   volatile struct {
@@ -175,6 +179,9 @@ typedef struct
 //    Use CFG_TUSB_MEM_SECTION to place it accordingly.
 CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd;
 
+// Dummy buffer to fix ZLPs overwriting the buffer (probably an USB/DMA controller bug)
+CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8];
+
 //--------------------------------------------------------------------+
 // Multiple Controllers
 //--------------------------------------------------------------------+
@@ -225,8 +232,36 @@ static inline uint8_t ep_addr2id(uint8_t ep_addr)
 //--------------------------------------------------------------------+
 // CONTROLLER API
 //--------------------------------------------------------------------+
+
+static void prepare_setup_packet(uint8_t rhport)
+{
+  if (_dcd_controller[rhport].max_speed == TUSB_SPEED_FULL )
+  {
+    _dcd.ep[0][1].buffer_fs.offset = get_buf_offset(_dcd.setup_packet);
+  }else
+  {
+    _dcd.ep[0][1].buffer_hs.offset = get_buf_offset(_dcd.setup_packet);
+  }
+}
+
+static void edpt_reset(uint8_t rhport, uint8_t ep_id)
+{
+  (void) rhport;
+  tu_memclr(&_dcd.ep[ep_id], sizeof(_dcd.ep[ep_id]));
+}
+
+static void edpt_reset_all(uint8_t rhport)
+{
+  for (uint8_t ep_id = 0; ep_id < 2*_dcd_controller[rhport].ep_pairs; ++ep_id)
+  {
+    edpt_reset(rhport, ep_id);
+  }
+  prepare_setup_packet(rhport);
+}
 void dcd_init(uint8_t rhport)
 {
+  edpt_reset_all(rhport);
+
   dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs;
 
   dcd_reg->EPLISTSTART  = (uint32_t) _dcd.ep;
@@ -277,6 +312,14 @@ void dcd_disconnect(uint8_t rhport)
   dcd_reg->DEVCMDSTAT &= ~CMDSTAT_DEVICE_CONNECT_MASK;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // DCD Endpoint Port
 //--------------------------------------------------------------------+
@@ -302,18 +345,13 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
 
 bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
 {
-  (void) rhport;
-
-  // TODO not support ISO yet
-  TU_VERIFY(p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS);
-
   //------------- Prepare Queue Head -------------//
   uint8_t ep_id = ep_addr2id(p_endpoint_desc->bEndpointAddress);
 
   // Check if endpoint is available
   TU_ASSERT( _dcd.ep[ep_id][0].disable && _dcd.ep[ep_id][1].disable );
 
-  tu_memclr(_dcd.ep[ep_id], 2*sizeof(ep_cmd_sts_t));
+  edpt_reset(rhport, ep_id);
   _dcd.ep[ep_id][0].is_iso = (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS);
 
   // Enable EP interrupt
@@ -325,19 +363,20 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
 
 void dcd_edpt_close_all (uint8_t rhport)
 {
-  (void) rhport;
-  // TODO implement dcd_edpt_close_all()
+  for (uint8_t ep_id = 0; ep_id < 2*_dcd_controller[rhport].ep_pairs; ++ep_id)
+  {
+    _dcd.ep[ep_id][0].active = _dcd.ep[ep_id][0].active = 0; // TODO proper way is to EPSKIP then wait ep[][].active then write ep[][].disable (see table 778 in LPC55S69 Use Manual)
+    _dcd.ep[ep_id][0].disable = _dcd.ep[ep_id][1].disable = 1;
+  }
 }
 
-static void prepare_setup_packet(uint8_t rhport)
+void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr)
 {
-  if (_dcd_controller[rhport].max_speed == TUSB_SPEED_FULL )
-  {
-    _dcd.ep[0][1].buffer_fs.offset = get_buf_offset(_dcd.setup_packet);;
-  }else
-  {
-    _dcd.ep[0][1].buffer_hs.offset = get_buf_offset(_dcd.setup_packet);;
-  }
+  (void) rhport;
+  
+  uint8_t ep_id = ep_addr2id(ep_addr);
+  _dcd.ep[ep_id][0].active = _dcd.ep[ep_id][0].active = 0; // TODO proper way is to EPSKIP then wait ep[][].active then write ep[][].disable (see table 778 in LPC55S69 Use Manual)
+  _dcd.ep[ep_id][0].disable = _dcd.ep[ep_id][1].disable = 1;
 }
 
 static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset, uint16_t total_bytes)
@@ -346,13 +385,12 @@ static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset,
 
   if (_dcd_controller[rhport].max_speed == TUSB_SPEED_FULL )
   {
-    // TODO ISO FullSpeed can have up to 1023 bytes
-    nbytes = tu_min16(total_bytes, NBYTES_CBI_FULLSPEED_MAX);
+    nbytes = tu_min16(total_bytes, _dcd.ep[ep_id][0].is_iso ? NBYTES_ISO_FS_MAX : NBYTES_CBI_FS_MAX);
     _dcd.ep[ep_id][0].buffer_fs.offset = buf_offset;
     _dcd.ep[ep_id][0].buffer_fs.nbytes = nbytes;
   }else
   {
-    nbytes = tu_min16(total_bytes, NBYTES_CBI_HIGHSPEED_MAX);
+    nbytes = tu_min16(total_bytes, NBYTES_CBI_HS_MAX);
     _dcd.ep[ep_id][0].buffer_hs.offset = buf_offset;
     _dcd.ep[ep_id][0].buffer_hs.nbytes = nbytes;
   }
@@ -364,13 +402,19 @@ static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset,
 
 bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
 {
-  (void) rhport;
-
   uint8_t const ep_id = ep_addr2id(ep_addr);
 
   tu_memclr(&_dcd.dma[ep_id], sizeof(xfer_dma_t));
   _dcd.dma[ep_id].total_bytes = total_bytes;
 
+  if (!buffer)
+  {
+    // Although having no data, ZLPs can cause buffer overwritten to zeroes.
+    // Probably due to USB/DMA controller side effect/bug.
+    // Assigned buffer offset to (valid) dummy to prevent overwriting to DATABUFSTART
+    buffer = (uint8_t*)(uint32_t)dummy;
+  }
+
   prepare_ep_xfer(rhport, ep_id, get_buf_offset(buffer), total_bytes);
 
   return true;
@@ -382,15 +426,14 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to
 static void bus_reset(uint8_t rhport)
 {
   tu_memclr(&_dcd, sizeof(dcd_data_t));
+  edpt_reset_all(rhport); 
 
-  // disable all non-control endpoints on bus reset
-  for(uint8_t ep_id = 2; ep_id < 2*MAX_EP_PAIRS; ep_id++)
+  // disable all endpoints as specified by LPC55S69 UM Table 778
+  for(uint8_t ep_id = 0; ep_id < 2*MAX_EP_PAIRS; ep_id++)
   {
     _dcd.ep[ep_id][0].disable = _dcd.ep[ep_id][1].disable = 1;
   }
 
-  prepare_setup_packet(rhport);
-
   dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs;
 
   dcd_reg->EPINUSE      = 0;
@@ -498,23 +541,15 @@ void dcd_int_handler(uint8_t rhport)
       }
     }
 
-    // TODO support suspend & resume
     if (cmd_stat & CMDSTAT_SUSPEND_CHANGE_MASK)
     {
-      if (cmd_stat & CMDSTAT_DEVICE_SUSPEND_MASK)
-      { // suspend signal, bus idle for more than 3ms
-        // Note: Host may delay more than 3 ms before and/or after bus reset before doing enumeration.
-        if (cmd_stat & CMDSTAT_DEVICE_ADDR_MASK)
-        {
-          dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true);
-        }
+      // suspend signal, bus idle for more than 3ms
+      // Note: Host may delay more than 3 ms before and/or after bus reset before doing enumeration.
+      if (cmd_stat & CMDSTAT_DEVICE_ADDR_MASK)
+      {
+        dcd_event_bus_signal(rhport, (cmd_stat & CMDSTAT_DEVICE_SUSPEND_MASK) ? DCD_EVENT_SUSPEND : DCD_EVENT_RESUME, true);
       }
     }
-//        else
-//      { // resume signal
-//    dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true);
-//      }
-//    }
   }
 
   // Setup Receive
diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c
index 108baf99d..1f27a6872 100644
--- a/src/portable/nxp/transdimension/dcd_transdimension.c
+++ b/src/portable/nxp/transdimension/dcd_transdimension.c
@@ -27,14 +27,14 @@
 #include "tusb_option.h"
 
 #if CFG_TUD_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
+    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
 
 #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly"
 
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "fsl_device_registers.h"
   #define INCLUDE_FSL_DEVICE_REGISTERS
 #else
@@ -153,7 +153,7 @@ typedef struct
   const uint8_t ep_count; // Max bi-directional Endpoints
 }dcd_controller_t;
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   static const dcd_controller_t _dcd_controller[] =
   {
     // RT1010 and RT1020 only has 1 USB controller
@@ -294,6 +294,14 @@ void dcd_disconnect(uint8_t rhport)
   dcd_reg->USBCMD &= ~USBCMD_RUN_STOP;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // HELPER
 //--------------------------------------------------------------------+
diff --git a/src/portable/nxp/transdimension/hcd_transdimension.c b/src/portable/nxp/transdimension/hcd_transdimension.c
index 2d0830981..392764ff6 100644
--- a/src/portable/nxp/transdimension/hcd_transdimension.c
+++ b/src/portable/nxp/transdimension/hcd_transdimension.c
@@ -29,14 +29,14 @@
 // NXP Trans-Dimension USB IP implement EHCI for host functionality
 
 #if CFG_TUH_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
+    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
 
 #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly"
 
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "fsl_device_registers.h"
 #else
   // LPCOpen for 18xx & 43xx
@@ -58,7 +58,7 @@ typedef struct
   const IRQn_Type irqnum; // IRQ number
 }hcd_controller_t;
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   static const hcd_controller_t _hcd_controller[] =
   {
     // RT1010 and RT1020 only has 1 USB controller
diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c
index e09382241..3e523ebc2 100644
--- a/src/portable/ohci/ohci.c
+++ b/src/portable/ohci/ohci.c
@@ -216,6 +216,11 @@ void hcd_port_reset(uint8_t hostid)
   OHCI_REG->rhport_status[0] = RHPORT_PORT_RESET_STATUS_MASK;
 }
 
+void hcd_port_reset_end(uint8_t rhport)
+{
+  (void) rhport;
+}
+
 bool hcd_port_connect_status(uint8_t hostid)
 {
   (void) hostid;
diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c
new file mode 100644
index 000000000..1bc5594d8
--- /dev/null
+++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c
@@ -0,0 +1,210 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018, hathach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUD_RPI_PIO_USB
+
+#include "pico.h"
+#include "pio_usb.h"
+#include "pio_usb_ll.h"
+
+#include "device/dcd.h"
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+#define RHPORT_OFFSET     1
+#define RHPORT_PIO(_x)    ((_x)-RHPORT_OFFSET)
+
+//-------------  -------------//
+static usb_device_t *usb_device = NULL;
+static usb_descriptor_buffers_t desc;
+
+/*------------------------------------------------------------------*/
+/* Device API
+ *------------------------------------------------------------------*/
+
+// Initialize controller to device mode
+void dcd_init (uint8_t rhport)
+{
+  (void) rhport;
+
+  static pio_usb_configuration_t config = PIO_USB_DEFAULT_CONFIG;
+  usb_device = pio_usb_device_init(&config, &desc);
+}
+
+// Enable device interrupt
+void dcd_int_enable (uint8_t rhport)
+{
+  (void) rhport;
+}
+
+// Disable device interrupt
+void dcd_int_disable (uint8_t rhport)
+{
+  (void) rhport;
+}
+
+// Receive Set Address request, mcu port must also include status IN response
+void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
+{
+  // must be called before queuing status
+  pio_usb_device_set_address(dev_addr);
+  dcd_edpt_xfer(rhport, 0x80, NULL, 0);
+}
+
+// Wake up host
+void dcd_remote_wakeup (uint8_t rhport)
+{
+  (void) rhport;
+}
+
+// Connect by enabling internal pull-up resistor on D+/D-
+void dcd_connect(uint8_t rhport)
+{
+  (void) rhport;
+}
+
+// Disconnect by disabling internal pull-up resistor on D+/D-
+void dcd_disconnect(uint8_t rhport)
+{
+  (void) rhport;
+}
+
+//--------------------------------------------------------------------+
+// Endpoint API
+//--------------------------------------------------------------------+
+
+// Configure endpoint's registers according to descriptor
+bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
+{
+  (void) rhport;
+  return pio_usb_device_endpoint_open((uint8_t const*) desc_ep);
+}
+
+void dcd_edpt_close_all (uint8_t rhport)
+{
+  (void) rhport;
+}
+
+// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack
+bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
+{
+  (void) rhport;
+  endpoint_t *ep = pio_usb_device_get_endpoint_by_address(ep_addr);
+  return pio_usb_ll_transfer_start(ep, buffer, total_bytes);
+}
+
+// Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c
+//bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes)
+//{
+//  (void) rhport;
+//  (void) ep_addr;
+//  (void) ff;
+//  (void) total_bytes;
+//  return false;
+//}
+
+// Stall endpoint
+void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr)
+{
+  (void) rhport;
+  endpoint_t *ep = pio_usb_device_get_endpoint_by_address(ep_addr);
+  ep->has_transfer = false;
+  ep->stalled = true;
+}
+
+// clear stall, data toggle is also reset to DATA0
+void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
+{
+  (void) rhport;
+  endpoint_t *ep = pio_usb_device_get_endpoint_by_address(ep_addr);
+  ep->data_id = 0;
+  ep->stalled = false;
+}
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+
+static void __no_inline_not_in_flash_func(handle_endpoint_irq)(uint8_t tu_rhport, xfer_result_t result, volatile uint32_t* ep_reg)
+{
+  const uint32_t ep_all = *ep_reg;
+
+  for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++)
+  {
+    uint32_t const mask = (1u << ep_idx);
+
+    if (ep_all & mask)
+    {
+      endpoint_t* ep = PIO_USB_ENDPOINT(ep_idx);
+      dcd_event_xfer_complete(tu_rhport, ep->ep_num, ep->actual_len, result, true);
+    }
+  }
+
+  // clear all
+  (*ep_reg) &= ~ep_all;
+}
+
+// IRQ Handler
+void __no_inline_not_in_flash_func(pio_usb_device_irq_handler)(uint8_t root_id)
+{
+  uint8_t const tu_rhport = root_id + 1;
+  root_port_t* rport = PIO_USB_ROOT_PORT(root_id);
+  uint32_t const ints = rport->ints;
+
+  if (ints & PIO_USB_INTS_RESET_END_BITS)
+  {
+    dcd_event_bus_reset(tu_rhport, TUSB_SPEED_FULL, true);
+  }
+
+  if (ints & PIO_USB_INTS_SETUP_REQ_BITS)
+  {
+    dcd_event_setup_received(tu_rhport, rport->setup_packet, true);
+  }
+
+  if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS )
+  {
+    handle_endpoint_irq(tu_rhport, XFER_RESULT_SUCCESS, &rport->ep_complete);
+  }
+
+  if ( ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS )
+  {
+    handle_endpoint_irq(tu_rhport, XFER_RESULT_STALLED, &rport->ep_stalled);
+  }
+
+  if ( ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS )
+  {
+    handle_endpoint_irq(tu_rhport, XFER_RESULT_FAILED, &rport->ep_error);
+  }
+
+  // clear all
+  rport->ints &= ~ints;
+}
+
+#endif
diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
new file mode 100644
index 000000000..58b153ac3
--- /dev/null
+++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
@@ -0,0 +1,225 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUH_RPI_PIO_USB
+
+#include "pico.h"
+#include "pio_usb.h"
+#include "pio_usb_ll.h"
+
+//--------------------------------------------------------------------+
+// INCLUDE
+//--------------------------------------------------------------------+
+#include "osal/osal.h"
+
+#include "host/hcd.h"
+#include "host/usbh.h"
+
+#define RHPORT_OFFSET     1
+#define RHPORT_PIO(_x)    ((_x)-RHPORT_OFFSET)
+
+static pio_usb_configuration_t pio_host_cfg = PIO_USB_DEFAULT_CONFIG;
+
+//--------------------------------------------------------------------+
+// HCD API
+//--------------------------------------------------------------------+
+bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param)
+{
+  (void) rhport;
+  TU_VERIFY(cfg_id == TUH_CFGID_RPI_PIO_USB_CONFIGURATION);
+  memcpy(&pio_host_cfg, cfg_param, sizeof(pio_usb_configuration_t));
+  return true;
+}
+
+bool hcd_init(uint8_t rhport)
+{
+  (void) rhport;
+
+  // To run USB SOF interrupt in core1, call this init in core1
+  pio_usb_host_init(&pio_host_cfg);
+
+  return true;
+}
+
+void hcd_port_reset(uint8_t rhport)
+{
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  pio_usb_host_port_reset_start(pio_rhport);
+}
+
+void hcd_port_reset_end(uint8_t rhport)
+{
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  pio_usb_host_port_reset_end(pio_rhport);
+}
+
+bool hcd_port_connect_status(uint8_t rhport)
+{
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+
+  root_port_t *root = PIO_USB_ROOT_PORT(pio_rhport);
+  port_pin_status_t line_state = pio_usb_bus_get_line_state(root);
+
+  return line_state != PORT_PIN_SE0;
+}
+
+tusb_speed_t hcd_port_speed_get(uint8_t rhport)
+{
+  // TODO determine link speed
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  return PIO_USB_ROOT_PORT(pio_rhport)->is_fullspeed ? TUSB_SPEED_FULL : TUSB_SPEED_LOW;
+}
+
+// Close all opened endpoint belong to this device
+void hcd_device_close(uint8_t rhport, uint8_t dev_addr)
+{
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  pio_usb_host_close_device(pio_rhport, dev_addr);
+}
+
+uint32_t hcd_frame_number(uint8_t rhport)
+{
+  (void) rhport;
+  return 0;
+}
+
+void hcd_int_enable(uint8_t rhport)
+{
+  (void) rhport;
+}
+
+void hcd_int_disable(uint8_t rhport)
+{
+  (void) rhport;
+}
+
+//--------------------------------------------------------------------+
+// Endpoint API
+//--------------------------------------------------------------------+
+
+bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep)
+{
+  hcd_devtree_info_t dev_tree;
+  hcd_devtree_get_info(dev_addr, &dev_tree);
+  bool const need_pre = (dev_tree.hub_addr && dev_tree.speed == TUSB_SPEED_LOW);
+
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const*) desc_ep, need_pre);
+}
+
+bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen)
+{
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen);
+}
+
+bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8])
+{
+  uint8_t const pio_rhport = RHPORT_PIO(rhport);
+  return pio_usb_host_send_setup(pio_rhport, dev_addr, setup_packet);
+}
+
+//bool hcd_edpt_busy(uint8_t dev_addr, uint8_t ep_addr)
+//{
+//    // EPX is shared, so multiple device addresses and endpoint addresses share that
+//    // so if any transfer is active on epx, we are busy. Interrupt endpoints have their own
+//    // EPX so ep->active will only be busy if there is a pending transfer on that interrupt endpoint
+//    // on that device
+//    pico_trace("hcd_edpt_busy dev addr %d ep_addr 0x%x\n", dev_addr, ep_addr);
+//    struct hw_endpoint *ep = get_dev_ep(dev_addr, ep_addr);
+//    assert(ep);
+//    bool busy = ep->active;
+//    pico_trace("busy == %d\n", busy);
+//    return busy;
+//}
+
+bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr)
+{
+  (void) dev_addr;
+  (void) ep_addr;
+
+  return true;
+}
+
+static void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t* rport, xfer_result_t result, volatile uint32_t* ep_reg)
+{
+  (void) rport;
+  const uint32_t ep_all = *ep_reg;
+
+  for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++)
+  {
+    uint32_t const mask = (1u << ep_idx);
+
+    if (ep_all & mask)
+    {
+      endpoint_t* ep = PIO_USB_ENDPOINT(ep_idx);
+      hcd_event_xfer_complete(ep->dev_addr, ep->ep_num, ep->actual_len, result, true);
+    }
+  }
+
+  // clear all
+  (*ep_reg) &= ~ep_all;
+}
+
+// IRQ Handler
+void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id)
+{
+  uint8_t const tu_rhport = root_id + 1;
+  root_port_t* rport = PIO_USB_ROOT_PORT(root_id);
+  uint32_t const ints = rport->ints;
+
+  if ( ints & PIO_USB_INTS_CONNECT_BITS )
+  {
+    hcd_event_device_attach(tu_rhport, true);
+  }
+
+  if ( ints & PIO_USB_INTS_DISCONNECT_BITS )
+  {
+    hcd_event_device_remove(tu_rhport, true);
+  }
+
+  if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS )
+  {
+    handle_endpoint_irq(rport, XFER_RESULT_SUCCESS, &rport->ep_complete);
+  }
+
+  if ( ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS )
+  {
+    handle_endpoint_irq(rport, XFER_RESULT_STALLED, &rport->ep_stalled);
+  }
+
+  if ( ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS )
+  {
+    handle_endpoint_irq(rport, XFER_RESULT_FAILED, &rport->ep_error);
+  }
+
+  // clear all
+  rport->ints &= ~ints;
+}
+
+#endif
diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c
index 915822798..4952d29b1 100644
--- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c
+++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c
@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040
+#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUD_RPI_PIO_USB
 
 #include "pico.h"
 #include "rp2040_usb.h"
@@ -55,7 +55,10 @@ static uint8_t *next_buffer_ptr;
 // USB_MAX_ENDPOINTS Endpoints, direction TUSB_DIR_OUT for out and TUSB_DIR_IN for in.
 static struct hw_endpoint hw_endpoints[USB_MAX_ENDPOINTS][2];
 
-static inline struct hw_endpoint *hw_endpoint_get_by_num(uint8_t num, tusb_dir_t dir)
+// SOF may be used by remote wakeup as RESUME, this indicate whether SOF is actually used by usbd
+static bool _sof_enable = false;
+
+TU_ATTR_ALWAYS_INLINE static inline struct hw_endpoint *hw_endpoint_get_by_num(uint8_t num, tusb_dir_t dir)
 {
   return &hw_endpoints[num][dir];
 }
@@ -85,7 +88,7 @@ static void _hw_endpoint_alloc(struct hw_endpoint *ep, uint8_t transfer_type)
   uint dpram_offset = hw_data_offset(ep->hw_data_buf);
   hard_assert(hw_data_offset(next_buffer_ptr) <= USB_DPRAM_MAX);
 
-  pico_info("  Alloced %d bytes at offset 0x%x (0x%p)\r\n", size, dpram_offset, ep->hw_data_buf);
+  pico_info("  Allocated %d bytes at offset 0x%x (0x%p)\r\n", size, dpram_offset, ep->hw_data_buf);
 
   // Fill in endpoint control register with buffer offset
   uint32_t const reg = EP_CTRL_ENABLE_BITS | ((uint)transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | dpram_offset;
@@ -185,7 +188,7 @@ static void hw_endpoint_xfer(uint8_t ep_addr, uint8_t *buffer, uint16_t total_by
     hw_endpoint_xfer_start(ep, buffer, total_bytes);
 }
 
-static void hw_handle_buff_status(void)
+static void __tusb_irq_path_func(hw_handle_buff_status)(void)
 {
     uint32_t remaining_buffers = usb_hw->buf_status;
     pico_trace("buf_status = 0x%08x\n", remaining_buffers);
@@ -214,7 +217,7 @@ static void hw_handle_buff_status(void)
     }
 }
 
-static void reset_ep0_pid(void)
+TU_ATTR_ALWAYS_INLINE static inline void reset_ep0_pid(void)
 {
     // If we have finished this transfer on EP0 set pid back to 1 for next
     // setup transfer. Also clear a stall in case
@@ -226,7 +229,7 @@ static void reset_ep0_pid(void)
     }
 }
 
-static void reset_non_control_endpoints(void)
+static void __tusb_irq_path_func(reset_non_control_endpoints)(void)
 {
   // Disable all non-control
   for ( uint8_t i = 0; i < USB_MAX_ENDPOINTS-1; i++ )
@@ -242,11 +245,21 @@ static void reset_non_control_endpoints(void)
   next_buffer_ptr = &usb_dpram->epx_data[0];
 }
 
-static void dcd_rp2040_irq(void)
+static void __tusb_irq_path_func(dcd_rp2040_irq)(void)
 {
     uint32_t const status = usb_hw->ints;
     uint32_t handled = 0;
 
+    if (status & USB_INTF_DEV_SOF_BITS)
+    {
+      handled |= USB_INTF_DEV_SOF_BITS;
+
+      // disable SOF interrupt if it is used for RESUME in remote wakeup
+      if (!_sof_enable) usb_hw_clear->inte = USB_INTS_DEV_SOF_BITS;
+
+      dcd_event_sof(0, usb_hw->sof_rd & USB_SOF_RD_BITS, true);
+    }
+
     // xfer events are handled before setup req. So if a transfer completes immediately
     // before closing the EP, the events will be delivered in same order.
     if (status & USB_INTS_BUFF_STATUS_BITS)
@@ -357,7 +370,7 @@ void dcd_init (uint8_t rhport)
   usb_hw->pwr = USB_USB_PWR_VBUS_DETECT_BITS | USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS;
 #endif
 
-  irq_set_exclusive_handler(USBCTRL_IRQ, dcd_rp2040_irq);
+  irq_add_shared_handler(USBCTRL_IRQ, dcd_rp2040_irq, PICO_SHARED_IRQ_HANDLER_HIGHEST_ORDER_PRIORITY);
 
   // Init control endpoints
   tu_memclr(hw_endpoints[0], 2*sizeof(hw_endpoint_t));
@@ -405,9 +418,13 @@ void dcd_set_address (__unused uint8_t rhport, __unused uint8_t dev_addr)
 
 void dcd_remote_wakeup(__unused uint8_t rhport)
 {
-    pico_info("dcd_remote_wakeup %d\n", rhport);
-    assert(rhport == 0);
-    usb_hw_set->sie_ctrl = USB_SIE_CTRL_RESUME_BITS;
+  pico_info("dcd_remote_wakeup %d\n", rhport);
+  assert(rhport == 0);
+
+  // since RESUME interrupt is not triggered if we are the one initiate
+  // briefly enable SOF to notify usbd when bus is ready
+  usb_hw_set->inte = USB_INTS_DEV_SOF_BITS;
+  usb_hw_set->sie_ctrl = USB_SIE_CTRL_RESUME_BITS;
 }
 
 // disconnect by disabling internal pull-up resistor on D+/D-
@@ -424,6 +441,21 @@ void dcd_connect(__unused uint8_t rhport)
   usb_hw_set->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+
+  _sof_enable = en;
+
+  if (en)
+  {
+    usb_hw_set->inte = USB_INTS_DEV_SOF_BITS;
+  }else
+  {
+    usb_hw_clear->inte = USB_INTS_DEV_SOF_BITS;
+  }
+}
+
 /*------------------------------------------------------------------*/
 /* DCD Endpoint port
  *------------------------------------------------------------------*/
@@ -501,7 +533,7 @@ void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr)
     hw_endpoint_close(ep_addr);
 }
 
-void dcd_int_handler(uint8_t rhport)
+void __tusb_irq_path_func(dcd_int_handler)(uint8_t rhport)
 {
   (void) rhport;
   dcd_rp2040_irq();
diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c
index 0c7a5220d..1125d30b6 100644
--- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c
+++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c
@@ -27,7 +27,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUH_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040
+#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUH_RPI_PIO_USB
 
 #include "pico.h"
 #include "rp2040_usb.h"
@@ -40,7 +40,8 @@
 #include "host/hcd.h"
 #include "host/usbh.h"
 
-#define ROOT_PORT 0
+// port 0 is native USB port, other is counted as software PIO
+#define RHPORT_NATIVE 0
 
 //--------------------------------------------------------------------+
 // Low level rp2040 controller functions
@@ -78,7 +79,7 @@ static struct hw_endpoint *get_dev_ep(uint8_t dev_addr, uint8_t ep_addr)
   return NULL;
 }
 
-static inline uint8_t dev_speed(void)
+TU_ATTR_ALWAYS_INLINE static inline uint8_t dev_speed(void)
 {
     return (usb_hw->sie_status & USB_SIE_STATUS_SPEED_BITS) >> USB_SIE_STATUS_SPEED_LSB;
 }
@@ -90,7 +91,7 @@ static bool need_pre(uint8_t dev_addr)
     return hcd_port_speed_get(0) != tuh_speed_get(dev_addr);
 }
 
-static void hw_xfer_complete(struct hw_endpoint *ep, xfer_result_t xfer_result)
+static void __tusb_irq_path_func(hw_xfer_complete)(struct hw_endpoint *ep, xfer_result_t xfer_result)
 {
     // Mark transfer as done before we tell the tinyusb stack
     uint8_t dev_addr = ep->dev_addr;
@@ -100,9 +101,11 @@ static void hw_xfer_complete(struct hw_endpoint *ep, xfer_result_t xfer_result)
     hcd_event_xfer_complete(dev_addr, ep_addr, xferred_len, xfer_result, true);
 }
 
-static void _handle_buff_status_bit(uint bit, struct hw_endpoint *ep)
+static void __tusb_irq_path_func(_handle_buff_status_bit)(uint bit, struct hw_endpoint *ep)
 {
     usb_hw_clear->buf_status = bit;
+    // EP may have been stalled?
+    assert(ep->active);
     bool done = hw_endpoint_xfer_continue(ep);
     if (done)
     {
@@ -110,7 +113,7 @@ static void _handle_buff_status_bit(uint bit, struct hw_endpoint *ep)
     }
 }
 
-static void hw_handle_buff_status(void)
+static void __tusb_irq_path_func(hw_handle_buff_status)(void)
 {
     uint32_t remaining_buffers = usb_hw->buf_status;
     pico_trace("buf_status 0x%08x\n", remaining_buffers);
@@ -162,13 +165,15 @@ static void hw_handle_buff_status(void)
     }
 }
 
-static void hw_trans_complete(void)
+static void __tusb_irq_path_func(hw_trans_complete)(void)
 {
   if (usb_hw->sie_ctrl & USB_SIE_CTRL_SEND_SETUP_BITS)
   {
     pico_trace("Sent setup packet\n");
     struct hw_endpoint *ep = &epx;
     assert(ep->active);
+    // Set transferred length to 8 for a setup packet
+    ep->xferred_len = 8;
     hw_xfer_complete(ep, XFER_RESULT_SUCCESS);
   }
   else
@@ -178,7 +183,7 @@ static void hw_trans_complete(void)
   }
 }
 
-static void hcd_rp2040_irq(void)
+static void __tusb_irq_path_func(hcd_rp2040_irq)(void)
 {
     uint32_t status = usb_hw->ints;
     uint32_t handled = 0;
@@ -189,17 +194,29 @@ static void hcd_rp2040_irq(void)
         
         if (dev_speed())
         {
-            hcd_event_device_attach(ROOT_PORT, true);
+            hcd_event_device_attach(RHPORT_NATIVE, true);
         }
         else
         {
-            hcd_event_device_remove(ROOT_PORT, true);
+            hcd_event_device_remove(RHPORT_NATIVE, true);
         }
 
         // Clear speed change interrupt
         usb_hw_clear->sie_status = USB_SIE_STATUS_SPEED_BITS;
     }
 
+    if (status & USB_INTS_STALL_BITS)
+    {
+        // We have rx'd a stall from the device
+        // NOTE THIS SHOULD HAVE PRIORITY OVER BUFF_STATUS
+        // AND TRANS_COMPLETE as the stall is an alternative response
+        // to one of those events
+        pico_trace("Stall REC\n");
+        handled |= USB_INTS_STALL_BITS;
+        usb_hw_clear->sie_status = USB_SIE_STATUS_STALL_REC_BITS;
+        hw_xfer_complete(&epx, XFER_RESULT_STALLED);
+    }
+
     if (status & USB_INTS_BUFF_STATUS_BITS)
     {
         handled |= USB_INTS_BUFF_STATUS_BITS;
@@ -215,15 +232,6 @@ static void hcd_rp2040_irq(void)
         hw_trans_complete();
     }
 
-    if (status & USB_INTS_STALL_BITS)
-    {
-        // We have rx'd a stall from the device
-        pico_trace("Stall REC\n");
-        handled |= USB_INTS_STALL_BITS;
-        usb_hw_clear->sie_status = USB_SIE_STATUS_STALL_REC_BITS;
-        hw_xfer_complete(&epx, XFER_RESULT_STALLED);
-    }
-
     if (status & USB_INTS_ERROR_RX_TIMEOUT_BITS)
     {
         handled |= USB_INTS_ERROR_RX_TIMEOUT_BITS;
@@ -243,6 +251,12 @@ static void hcd_rp2040_irq(void)
     }
 }
 
+void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport)
+{
+  (void) rhport;
+  hcd_rp2040_irq();
+}
+
 static struct hw_endpoint *_next_free_interrupt_ep(void)
 {
     struct hw_endpoint *ep = NULL;
@@ -252,7 +266,7 @@ static struct hw_endpoint *_next_free_interrupt_ep(void)
         if (!ep->configured)
         {
             // Will be configured by _hw_endpoint_init / _hw_endpoint_allocate
-            ep->interrupt_num = i - 1;
+            ep->interrupt_num = (uint8_t) (i - 1);
             return ep;
         }
     }
@@ -287,7 +301,7 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type)
     return ep;
 }
 
-static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep_addr, uint wMaxPacketSize, uint8_t transfer_type, uint8_t bmInterval)
+static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type, uint8_t bmInterval)
 {
     // Already has data buffer, endpoint control, and buffer control allocated at this point
     assert(ep->endpoint_control);
@@ -319,7 +333,10 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t
                   | EP_CTRL_INTERRUPT_PER_BUFFER
                   | (ep->transfer_type << EP_CTRL_BUFFER_TYPE_LSB)
                   | dpram_offset;
-    ep_reg |= bmInterval ? (bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB : 0;
+    if (bmInterval)
+    {
+      ep_reg |= (uint32_t) ((bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB);
+    }
     *ep->endpoint_control = ep_reg;
     pico_trace("endpoint control (0x%p) <- 0x%x\n", ep->endpoint_control, ep_reg);
     ep->configured = true;
@@ -332,7 +349,7 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t
         // device address
         // endpoint number / direction
         // preamble
-        uint32_t reg = dev_addr | (num << USB_ADDR_ENDP1_ENDPOINT_LSB);
+        uint32_t reg = (uint32_t) (dev_addr | (num << USB_ADDR_ENDP1_ENDPOINT_LSB));
 
         if (dir == TUSB_DIR_OUT)
         {
@@ -358,62 +375,74 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t
 //--------------------------------------------------------------------+
 bool hcd_init(uint8_t rhport)
 {
-    pico_trace("hcd_init %d\n", rhport);
-    assert(rhport == 0);
+  (void) rhport;
+  pico_trace("hcd_init %d\n", rhport);
+  assert(rhport == 0);
 
-    // Reset any previous state
-    rp2040_usb_init();
+  // Reset any previous state
+  rp2040_usb_init();
 
-    // Force VBUS detect to always present, for now we assume vbus is always provided (without using VBUS En)
-    usb_hw->pwr = USB_USB_PWR_VBUS_DETECT_BITS | USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS;
+  // Force VBUS detect to always present, for now we assume vbus is always provided (without using VBUS En)
+  usb_hw->pwr = USB_USB_PWR_VBUS_DETECT_BITS | USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS;
 
-    irq_set_exclusive_handler(USBCTRL_IRQ, hcd_rp2040_irq);
+  // Remove shared irq if it was previously added so as not to fill up shared irq slots
+  irq_remove_handler(USBCTRL_IRQ, hcd_rp2040_irq);
 
-    // clear epx and interrupt eps
-    memset(&ep_pool, 0, sizeof(ep_pool));
+  irq_add_shared_handler(USBCTRL_IRQ, hcd_rp2040_irq, PICO_SHARED_IRQ_HANDLER_HIGHEST_ORDER_PRIORITY);
 
-    // Enable in host mode with SOF / Keep alive on
-    usb_hw->main_ctrl = USB_MAIN_CTRL_CONTROLLER_EN_BITS | USB_MAIN_CTRL_HOST_NDEVICE_BITS;
-    usb_hw->sie_ctrl = SIE_CTRL_BASE;
-    usb_hw->inte = USB_INTE_BUFF_STATUS_BITS      | 
-                   USB_INTE_HOST_CONN_DIS_BITS    | 
-                   USB_INTE_HOST_RESUME_BITS      | 
-                   USB_INTE_STALL_BITS            | 
-                   USB_INTE_TRANS_COMPLETE_BITS   |
-                   USB_INTE_ERROR_RX_TIMEOUT_BITS |
-                   USB_INTE_ERROR_DATA_SEQ_BITS   ;
+  // clear epx and interrupt eps
+  memset(&ep_pool, 0, sizeof(ep_pool));
 
-    return true;
+  // Enable in host mode with SOF / Keep alive on
+  usb_hw->main_ctrl = USB_MAIN_CTRL_CONTROLLER_EN_BITS | USB_MAIN_CTRL_HOST_NDEVICE_BITS;
+  usb_hw->sie_ctrl = SIE_CTRL_BASE;
+  usb_hw->inte = USB_INTE_BUFF_STATUS_BITS      |
+                 USB_INTE_HOST_CONN_DIS_BITS    |
+                 USB_INTE_HOST_RESUME_BITS      |
+                 USB_INTE_STALL_BITS            |
+                 USB_INTE_TRANS_COMPLETE_BITS   |
+                 USB_INTE_ERROR_RX_TIMEOUT_BITS |
+                 USB_INTE_ERROR_DATA_SEQ_BITS   ;
+
+  return true;
 }
 
 void hcd_port_reset(uint8_t rhport)
 {
-    pico_trace("hcd_port_reset\n");
-    assert(rhport == 0);
-    // TODO: Nothing to do here yet. Perhaps need to reset some state?
+  (void) rhport;
+  pico_trace("hcd_port_reset\n");
+  assert(rhport == 0);
+  // TODO: Nothing to do here yet. Perhaps need to reset some state?
+}
+
+void hcd_port_reset_end(uint8_t rhport)
+{
+  (void) rhport;
 }
 
 bool hcd_port_connect_status(uint8_t rhport)
 {
-    pico_trace("hcd_port_connect_status\n");
-    assert(rhport == 0);
-    return usb_hw->sie_status & USB_SIE_STATUS_SPEED_BITS;
+  (void) rhport;
+  pico_trace("hcd_port_connect_status\n");
+  assert(rhport == 0);
+  return usb_hw->sie_status & USB_SIE_STATUS_SPEED_BITS;
 }
 
 tusb_speed_t hcd_port_speed_get(uint8_t rhport)
 {
-    assert(rhport == 0);
-    // TODO: Should enumval this register
-    switch (dev_speed())
-    {
-        case 1:
-            return TUSB_SPEED_LOW;
-        case 2:
-            return TUSB_SPEED_FULL;
-        default:
-            panic("Invalid speed\n");
-            return TUSB_SPEED_INVALID;
-    }
+  (void) rhport;
+  assert(rhport == 0);
+  // TODO: Should enumval this register
+  switch (dev_speed())
+  {
+      case 1:
+          return TUSB_SPEED_LOW;
+      case 2:
+          return TUSB_SPEED_FULL;
+      default:
+          panic("Invalid speed\n");
+          return TUSB_SPEED_INVALID;
+  }
 }
 
 // Close all opened endpoint belong to this device
@@ -451,15 +480,17 @@ uint32_t hcd_frame_number(uint8_t rhport)
 
 void hcd_int_enable(uint8_t rhport)
 {
-    assert(rhport == 0);
-    irq_set_enabled(USBCTRL_IRQ, true);
+  (void) rhport;
+  assert(rhport == 0);
+  irq_set_enabled(USBCTRL_IRQ, true);
 }
 
 void hcd_int_disable(uint8_t rhport)
 {
-    // todo we should check this is disabling from the correct core; note currently this is never called
-    assert(rhport == 0);
-    irq_set_enabled(USBCTRL_IRQ, false);
+  (void) rhport;
+  // todo we should check this is disabling from the correct core; note currently this is never called
+  assert(rhport == 0);
+  irq_set_enabled(USBCTRL_IRQ, false);
 }
 
 //--------------------------------------------------------------------+
@@ -474,6 +505,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
 
     // Allocated differently based on if it's an interrupt endpoint or not
     struct hw_endpoint *ep = _hw_endpoint_allocate(ep_desc->bmAttributes.xfer);
+    TU_ASSERT(ep);
 
     _hw_endpoint_init(ep,
         dev_addr,
@@ -496,10 +528,11 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *
 
     // Get appropriate ep. Either EPX or interrupt endpoint
     struct hw_endpoint *ep = get_dev_ep(dev_addr, ep_addr);
-    assert(ep);
-    // Should we maybe be able to check if endpt is busy/active instead?
-    if(ep->active)
-        return false;
+
+    TU_ASSERT(ep);
+
+    // EP should be inactive
+    assert(!ep->active);
 
     // Control endpoint can change direction 0x00 <-> 0x80
     if ( ep_addr != ep->ep_addr )
@@ -518,7 +551,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *
 
         // That has set up buffer control, endpoint control etc
         // for host we have to initiate the transfer
-        usb_hw->dev_addr_ctrl = dev_addr | (ep_num << USB_ADDR_ENDP_ENDPOINT_LSB);
+        usb_hw->dev_addr_ctrl = (uint32_t) (dev_addr | (ep_num << USB_ADDR_ENDP_ENDPOINT_LSB));
 
         uint32_t flags = USB_SIE_CTRL_START_TRANS_BITS | SIE_CTRL_BASE |
                          (ep_dir ? USB_SIE_CTRL_RECEIVE_DATA_BITS : USB_SIE_CTRL_SEND_DATA_BITS);
@@ -539,11 +572,17 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet
     (void) rhport;
 
     // Copy data into setup packet buffer
-    memcpy((void*)&usbh_dpram->setup_packet[0], setup_packet, 8);
+    for(uint8_t i=0; i<8; i++)
+    {
+      usbh_dpram->setup_packet[i] = setup_packet[i];
+    }
 
     // Configure EP0 struct with setup info for the trans complete
     struct hw_endpoint *ep = _hw_endpoint_allocate(0);
-    assert(ep == &epx);
+    TU_ASSERT(ep);
+
+    // EPX should be inactive
+    assert(!ep->active);
 
     // EP0 out
     _hw_endpoint_init(ep, dev_addr, 0x00, ep->wMaxPacketSize, 0, 0);
@@ -564,21 +603,6 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet
     return true;
 }
 
-
-//bool hcd_edpt_busy(uint8_t dev_addr, uint8_t ep_addr)
-//{
-//    // EPX is shared, so multiple device addresses and endpoint addresses share that
-//    // so if any transfer is active on epx, we are busy. Interrupt endpoints have their own
-//    // EPX so ep->active will only be busy if there is a pending transfer on that interrupt endpoint
-//    // on that device
-//    pico_trace("hcd_edpt_busy dev addr %d ep_addr 0x%x\n", dev_addr, ep_addr);
-//    struct hw_endpoint *ep = get_dev_ep(dev_addr, ep_addr);
-//    assert(ep);
-//    bool busy = ep->active;
-//    pico_trace("busy == %d\n", busy);
-//    return busy;
-//}
-
 bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr)
 {
     (void) dev_addr;
diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c
index 9c3e5d011..25c013bd2 100644
--- a/src/portable/raspberrypi/rp2040/rp2040_usb.c
+++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c
@@ -38,7 +38,7 @@ const char *ep_dir_string[] = {
         "in",
 };
 
-static inline void _hw_endpoint_lock_update(__unused struct hw_endpoint * ep, __unused int delta) {
+TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_lock_update(__unused struct hw_endpoint * ep, __unused int delta) {
     // todo add critsec as necessary to prevent issues between worker and IRQ...
     //  note that this is perhaps as simple as disabling IRQs because it would make
     //  sense to have worker and IRQ on same core, however I think using critsec is about equivalent.
@@ -58,9 +58,11 @@ void rp2040_usb_init(void)
   unreset_block_wait(RESETS_RESET_USBCTRL_BITS);
 
   // Clear any previous state just in case
-  // TODO Suppress warning array-bounds with gcc11
 #pragma GCC diagnostic push
 #pragma GCC diagnostic ignored "-Warray-bounds"
+#if __GNUC__ > 6
+#pragma GCC diagnostic ignored "-Wstringop-overflow"
+#endif
   memset(usb_hw, 0, sizeof(*usb_hw));
   memset(usb_dpram, 0, sizeof(*usb_dpram));
 #pragma GCC diagnostic pop
@@ -69,7 +71,7 @@ void rp2040_usb_init(void)
   usb_hw->muxing = USB_USB_MUXING_TO_PHY_BITS | USB_USB_MUXING_SOFTCON_BITS;
 }
 
-void hw_endpoint_reset_transfer(struct hw_endpoint *ep)
+void __tusb_irq_path_func(hw_endpoint_reset_transfer)(struct hw_endpoint *ep)
 {
   ep->active = false;
   ep->remaining_len = 0;
@@ -77,7 +79,7 @@ void hw_endpoint_reset_transfer(struct hw_endpoint *ep)
   ep->user_buf = 0;
 }
 
-void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask) {
+void __tusb_irq_path_func(_hw_endpoint_buffer_control_update32)(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask) {
     uint32_t value = 0;
     if (and_mask) {
         value = *ep->buffer_control & and_mask;
@@ -108,7 +110,7 @@ void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_m
 }
 
 // prepare buffer, return buffer control
-static uint32_t prepare_ep_buffer(struct hw_endpoint *ep, uint8_t buf_id)
+static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint *ep, uint8_t buf_id)
 {
   uint16_t const buflen = tu_min16(ep->remaining_len, ep->wMaxPacketSize);
   ep->remaining_len = (uint16_t)(ep->remaining_len - buflen);
@@ -143,7 +145,7 @@ static uint32_t prepare_ep_buffer(struct hw_endpoint *ep, uint8_t buf_id)
 }
 
 // Prepare buffer control register value
-static void _hw_endpoint_start_next_buffer(struct hw_endpoint *ep)
+static void __tusb_irq_path_func(_hw_endpoint_start_next_buffer)(struct hw_endpoint *ep)
 {
   uint32_t ep_ctrl = *ep->endpoint_control;
 
@@ -174,7 +176,7 @@ static void _hw_endpoint_start_next_buffer(struct hw_endpoint *ep)
 
   *ep->endpoint_control = ep_ctrl;
 
-  TU_LOG(3, "  Prepare BufCtrl: [0] = 0x%04u  [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
+  TU_LOG(3, "  Prepare BufCtrl: [0] = 0x%04x  [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
 
   // Finally, write to buffer_control which will trigger the transfer
   // the next time the controller polls this dpram address
@@ -205,7 +207,7 @@ void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t to
 }
 
 // sync endpoint buffer and return transferred bytes
-static uint16_t sync_ep_buffer(struct hw_endpoint *ep, uint8_t buf_id)
+static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint *ep, uint8_t buf_id)
 {
   uint32_t buf_ctrl = _hw_endpoint_buffer_control_get_value32(ep);
   if (buf_id)  buf_ctrl = buf_ctrl >> 16;
@@ -241,13 +243,13 @@ static uint16_t sync_ep_buffer(struct hw_endpoint *ep, uint8_t buf_id)
   return xferred_bytes;
 }
 
-static void _hw_endpoint_xfer_sync (struct hw_endpoint *ep)
+static void __tusb_irq_path_func(_hw_endpoint_xfer_sync) (struct hw_endpoint *ep)
 {
   // Update hw endpoint struct with info from hardware
   // after a buff status interrupt
 
   uint32_t __unused buf_ctrl = _hw_endpoint_buffer_control_get_value32(ep);
-  TU_LOG(3, "  Sync BufCtrl: [0] = 0x%04u  [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
+  TU_LOG(3, "  Sync BufCtrl: [0] = 0x%04x  [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
 
   // always sync buffer 0
   uint16_t buf0_bytes = sync_ep_buffer(ep, 0);
@@ -285,14 +287,14 @@ static void _hw_endpoint_xfer_sync (struct hw_endpoint *ep)
       usb_hw->abort &= ~TU_BIT(ep_id);
 
       TU_LOG(3, "----SHORT PACKET buffer0 on EP %02X:\r\n", ep->ep_addr);
-      TU_LOG(3, "  BufCtrl: [0] = 0x%04u  [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
+      TU_LOG(3, "  BufCtrl: [0] = 0x%04x  [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
 #endif
     }
   }
 }
 
 // Returns true if transfer is complete
-bool hw_endpoint_xfer_continue(struct hw_endpoint *ep)
+bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint *ep)
 {
   _hw_endpoint_lock_update(ep, 1);
   // Part way through a transfer
diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h
index da1933ddd..c72dae64c 100644
--- a/src/portable/raspberrypi/rp2040/rp2040_usb.h
+++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h
@@ -16,6 +16,15 @@
 #define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX PICO_RP2040_USB_DEVICE_ENUMERATION_FIX
 #endif
 
+#ifndef PICO_RP2040_USB_FAST_IRQ
+#define PICO_RP2040_USB_FAST_IRQ 0
+#endif
+
+#if PICO_RP2040_USB_FAST_IRQ
+#define __tusb_irq_path_func(x) __no_inline_not_in_flash_func(x)
+#else
+#define __tusb_irq_path_func(x) x
+#endif
 
 #define pico_info(...)  TU_LOG(2, __VA_ARGS__)
 #define pico_trace(...) TU_LOG(3, __VA_ARGS__)
@@ -72,16 +81,20 @@ bool hw_endpoint_xfer_continue(struct hw_endpoint *ep);
 void hw_endpoint_reset_transfer(struct hw_endpoint *ep);
 
 void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask);
-static inline uint32_t _hw_endpoint_buffer_control_get_value32(struct hw_endpoint *ep) {
+
+TU_ATTR_ALWAYS_INLINE static inline uint32_t _hw_endpoint_buffer_control_get_value32(struct hw_endpoint *ep) {
     return *ep->buffer_control;
 }
-static inline void _hw_endpoint_buffer_control_set_value32(struct hw_endpoint *ep, uint32_t value) {
+
+TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_buffer_control_set_value32(struct hw_endpoint *ep, uint32_t value) {
     return _hw_endpoint_buffer_control_update32(ep, 0, value);
 }
-static inline void _hw_endpoint_buffer_control_set_mask32(struct hw_endpoint *ep, uint32_t value) {
+
+TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_buffer_control_set_mask32(struct hw_endpoint *ep, uint32_t value) {
     return _hw_endpoint_buffer_control_update32(ep, ~value, value);
 }
-static inline void _hw_endpoint_buffer_control_clear_mask32(struct hw_endpoint *ep, uint32_t value) {
+
+TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_buffer_control_clear_mask32(struct hw_endpoint *ep, uint32_t value) {
     return _hw_endpoint_buffer_control_update32(ep, ~value, 0);
 }
 
diff --git a/src/portable/renesas/usba/dcd_usba.c b/src/portable/renesas/usba/dcd_usba.c
index 330f65348..fa87c9f4d 100644
--- a/src/portable/renesas/usba/dcd_usba.c
+++ b/src/portable/renesas/usba/dcd_usba.c
@@ -687,6 +687,14 @@ void dcd_disconnect(uint8_t rhport)
   USB0.SYSCFG.BIT.DPRPU = 0;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/renesas/usba/hcd_usba.c b/src/portable/renesas/usba/hcd_usba.c
index ebb682342..5246ecb94 100644
--- a/src/portable/renesas/usba/hcd_usba.c
+++ b/src/portable/renesas/usba/hcd_usba.c
@@ -620,6 +620,11 @@ void hcd_port_reset(uint8_t rhport)
   _hcd.need_reset = false;
 }
 
+void hcd_port_reset_end(uint8_t rhport)
+{
+  (void) rhport;
+}
+
 tusb_speed_t hcd_port_speed_get(uint8_t rhport)
 {
   (void)rhport;
diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c
index fbea03b1d..6677891a5 100644
--- a/src/portable/sony/cxd56/dcd_cxd56.c
+++ b/src/portable/sony/cxd56/dcd_cxd56.c
@@ -247,6 +247,14 @@ void dcd_disconnect(uint8_t rhport)
   DEV_DISCONNECT(usbdev);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
@@ -363,7 +371,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to
 
     if (usbdcd_driver.setup_processed)
     {
-      if (osal_queue_receive(usbdcd_driver.setup_queue, &ctrl))
+      if (osal_queue_receive(usbdcd_driver.setup_queue, &ctrl, 100))
       {
         usbdcd_driver.setup_processed = false;
         dcd_event_setup_received(0, (uint8_t *)&ctrl, false);
diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
index 4fd189188..0e78c796e 100644
--- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
@@ -287,6 +287,14 @@ void dcd_connect(uint8_t rhport)
 }
 #endif
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 // Enable device interrupt
 void dcd_int_enable (uint8_t rhport)
 {
diff --git a/src/portable/st/synopsys/dcd_synopsys.c b/src/portable/st/synopsys/dcd_synopsys.c
index d7f659340..2fc3adb4f 100644
--- a/src/portable/st/synopsys/dcd_synopsys.c
+++ b/src/portable/st/synopsys/dcd_synopsys.c
@@ -602,6 +602,13 @@ void dcd_disconnect(uint8_t rhport)
   dev->DCTL |= USB_OTG_DCTL_SDIS;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
 
 /*------------------------------------------------------------------*/
 /* DCD Endpoint port
diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c
index 27514339b..a0be846a5 100644
--- a/src/portable/sunxi/dcd_sunxi_musb.c
+++ b/src/portable/sunxi/dcd_sunxi_musb.c
@@ -909,6 +909,14 @@ void dcd_disconnect(uint8_t rhport)
   USBC_REG_clear_bit_b(USBC_BP_POWER_D_SOFT_CONNECT, USBC_REG_PCTL(USBC0_BASE));
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 void dcd_int_enable(uint8_t rhport)
 {
   (void)rhport;
diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c
index c71f38d2d..f5ecdfe4f 100644
--- a/src/portable/synopsys/dwc2/dcd_dwc2.c
+++ b/src/portable/synopsys/dwc2/dcd_dwc2.c
@@ -34,6 +34,13 @@
 #include "device/dcd.h"
 #include "dwc2_type.h"
 
+// Following symbols must be defined by port header
+// - _dwc2_controller[]: array of controllers
+// - DWC2_EP_MAX: largest EP counts of all controllers
+// - dwc2_phy_init/dwc2_phy_update: phy init called before and after core reset
+// - dwc2_dcd_int_enable/dwc2_dcd_int_disable
+// - dwc2_remote_wakeup_delay
+
 #if defined(TUP_USBIP_DWC2_STM32)
   #include "dwc2_stm32.h"
 #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
@@ -55,7 +62,7 @@
 //--------------------------------------------------------------------+
 
 // DWC2 registers
-#define DWC2_REG(_port)       ((dwc2_regs_t*) DWC2_REG_BASE)
+#define DWC2_REG(_port)       ((dwc2_regs_t*) _dwc2_controller[_port].reg_base)
 
 // Debug level for DWC2
 #define DWC2_DEBUG    2
@@ -72,7 +79,6 @@
 #define dcache_clean_invalidate(_addr, _size)
 #endif
 
-
 static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[2];
 
 typedef struct {
@@ -93,44 +99,47 @@ static uint16_t ep0_pending[2];                   // Index determines direction
 static uint16_t _allocated_fifo_words_tx;         // TX FIFO size in words (IN EPs)
 static bool     _out_ep_closed;                   // Flag to check if RX FIFO size needs an update (reduce its size)
 
+// SOF enabling flag - required for SOF to not get disabled in ISR when SOF was enabled by
+static bool _sof_en;
+
 // Calculate the RX FIFO size according to recommendations from reference manual
-static inline uint16_t calc_rx_ff_size(uint16_t ep_size)
+static inline uint16_t calc_grxfsiz(uint16_t max_ep_size, uint8_t ep_count)
 {
-  return 15 + 2*(ep_size/4) + 2*DWC2_EP_MAX;
+  return 15 + 2*(max_ep_size/4) + 2*ep_count;
 }
 
 static void update_grxfsiz(uint8_t rhport)
 {
-  (void) rhport;
-
-  dwc2_regs_t * dwc2 = DWC2_REG(rhport);
+  dwc2_regs_t * dwc2     = DWC2_REG(rhport);
+  uint8_t const ep_count = _dwc2_controller[rhport].ep_count;
 
   // Determine largest EP size for RX FIFO
   uint16_t max_epsize = 0;
-  for (uint8_t epnum = 0; epnum < DWC2_EP_MAX; epnum++)
+  for (uint8_t epnum = 0; epnum < ep_count; epnum++)
   {
     max_epsize = tu_max16(max_epsize, xfer_status[epnum][TUSB_DIR_OUT].max_size);
   }
 
   // Update size of RX FIFO
-  dwc2->grxfsiz = calc_rx_ff_size(max_epsize);
+  dwc2->grxfsiz = calc_grxfsiz(max_epsize, ep_count);
 }
 
-// Setup the control endpoint 0.
+// Start of Bus Reset
 static void bus_reset(uint8_t rhport)
 {
-  (void) rhport;
-
-  dwc2_regs_t * dwc2 = DWC2_REG(rhport);
+  dwc2_regs_t * dwc2     = DWC2_REG(rhport);
+  uint8_t const ep_count = _dwc2_controller[rhport].ep_count;
 
   tu_memclr(xfer_status, sizeof(xfer_status));
   _out_ep_closed = false;
 
+  _sof_en = false;
+
   // clear device address
   dwc2->dcfg &= ~DCFG_DAD_Msk;
 
   // 1. NAK for all OUT endpoints
-  for ( uint8_t n = 0; n < DWC2_EP_MAX; n++ )
+  for ( uint8_t n = 0; n < ep_count; n++ )
   {
     dwc2->epout[n].doepctl |= DOEPCTL_SNAK;
   }
@@ -180,22 +189,24 @@ static void bus_reset(uint8_t rhport)
   //   - 2 for each used OUT endpoint
   //
   //   Therefore GRXFSIZ = 13 + 1 + 1 + 2 x (Largest-EPsize/4) + 2 x EPOUTnum
-  //   - FullSpeed (64 Bytes ): GRXFSIZ = 15 + 2 x  16 + 2 x DWC2_EP_MAX = 47  + 2 x DWC2_EP_MAX
-  //   - Highspeed (512 bytes): GRXFSIZ = 15 + 2 x 128 + 2 x DWC2_EP_MAX = 271 + 2 x DWC2_EP_MAX
+  //   - FullSpeed (64 Bytes ): GRXFSIZ = 15 + 2 x  16 + 2 x ep_count = 47  + 2 x ep_count
+  //   - Highspeed (512 bytes): GRXFSIZ = 15 + 2 x 128 + 2 x ep_count = 271 + 2 x ep_count
   //
   //   NOTE: Largest-EPsize & EPOUTnum is actual used endpoints in configuration. Since DCD has no knowledge
-  //   of the overall picture yet. We will use the worst scenario: largest possible + DWC2_EP_MAX
+  //   of the overall picture yet. We will use the worst scenario: largest possible + ep_count
   //
   //   For Isochronous, largest EP size can be 1023/1024 for FS/HS respectively. In addition if multiple ISO
   //   are enabled at least "2 x (Largest-EPsize/4) + 1" are recommended.  Maybe provide a macro for application to
   //   overwrite this.
 
-  dwc2->grxfsiz = calc_rx_ff_size(TUD_OPT_HIGH_SPEED ? 512 : 64);
+  // EP0 out max is 64
+  dwc2->grxfsiz = calc_grxfsiz(64, ep_count);
 
+  // Setup the control endpoint 0
   _allocated_fifo_words_tx = 16;
 
   // Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word )
-  dwc2->dieptxf0 = (16 << DIEPTXF0_TX0FD_Pos) | (DWC2_EP_FIFO_SIZE/4 - _allocated_fifo_words_tx);
+  dwc2->dieptxf0 = (16 << DIEPTXF0_TX0FD_Pos) | (_dwc2_controller[rhport].ep_fifo_size/4 - _allocated_fifo_words_tx);
 
   // Fixed control EP0 size to 64 bytes
   dwc2->epin[0].diepctl &= ~(0x03 << DIEPCTL_MPSIZ_Pos);
@@ -358,7 +369,11 @@ static void reset_core(dwc2_regs_t * dwc2)
 static bool phy_hs_supported(dwc2_regs_t * dwc2)
 {
   // note: esp32 incorrect report its hs_phy_type as utmi
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
+  return false;
+#else
   return TUD_OPT_HIGH_SPEED && dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE;
+#endif
 }
 
 static void phy_fs_init(dwc2_regs_t * dwc2)
@@ -457,6 +472,7 @@ static bool check_dwc2(dwc2_regs_t * dwc2)
 #endif
 
   // For some reasons: GD32VF103 snpsid and all hwcfg register are always zero (skip it)
+  (void) dwc2;
 #if !TU_CHECK_MCU(OPT_MCU_GD32VF103)
   uint32_t const gsnpsid = dwc2->gsnpsid & GSNPSID_ID_MASK;
   TU_ASSERT(gsnpsid == DWC2_OTG_ID || gsnpsid == DWC2_FS_IOT_ID || gsnpsid == DWC2_HS_IOT_ID);
@@ -588,6 +604,24 @@ void dcd_disconnect(uint8_t rhport)
   dwc2->dctl |= DCTL_SDIS;
 }
 
+// Be advised: audio, video and possibly other iso-ep classes use dcd_sof_enable() to enable/disable its corresponding ISR on purpose!
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  dwc2_regs_t * dwc2 = DWC2_REG(rhport);
+
+  _sof_en = en;
+
+  if (en)
+  {
+    dwc2->gintsts = GINTSTS_SOF;
+    dwc2->gintmsk |= GINTMSK_SOFM;
+  }
+  else
+  {
+    dwc2->gintmsk &= ~GINTMSK_SOFM;
+  }
+}
 
 /*------------------------------------------------------------------*/
 /* DCD Endpoint port
@@ -597,12 +631,13 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 {
   (void) rhport;
 
-  dwc2_regs_t * dwc2 = DWC2_REG(rhport);
+  dwc2_regs_t * dwc2     = DWC2_REG(rhport);
+  uint8_t const ep_count = _dwc2_controller[rhport].ep_count;
 
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir   = tu_edpt_dir(desc_edpt->bEndpointAddress);
 
-  TU_ASSERT(epnum < DWC2_EP_MAX);
+  TU_ASSERT(epnum < ep_count);
 
   xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
   xfer->max_size = tu_edpt_packet_size(desc_edpt);
@@ -613,12 +648,12 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
   if(dir == TUSB_DIR_OUT)
   {
     // Calculate required size of RX FIFO
-    uint16_t const sz = calc_rx_ff_size(4*fifo_size);
+    uint16_t const sz = calc_grxfsiz(4*fifo_size, ep_count);
 
     // If size_rx needs to be extended check if possible and if so enlarge it
     if (dwc2->grxfsiz < sz)
     {
-      TU_ASSERT(sz + _allocated_fifo_words_tx <= DWC2_EP_FIFO_SIZE/4);
+      TU_ASSERT(sz + _allocated_fifo_words_tx <= _dwc2_controller[rhport].ep_fifo_size/4);
 
       // Enlarge RX FIFO
       dwc2->grxfsiz = sz;
@@ -655,15 +690,15 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
     // - IN EP 1 gets FIFO 1, IN EP "n" gets FIFO "n".
 
     // Check if free space is available
-    TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= DWC2_EP_FIFO_SIZE/4);
+    TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size/4);
 
     _allocated_fifo_words_tx += fifo_size;
 
-    TU_LOG(DWC2_DEBUG, "    Allocated %u bytes at offset %u", fifo_size*4, DWC2_EP_FIFO_SIZE-_allocated_fifo_words_tx*4);
+    TU_LOG(DWC2_DEBUG, "    Allocated %u bytes at offset %lu", fifo_size*4, _dwc2_controller[rhport].ep_fifo_size-_allocated_fifo_words_tx*4);
 
     // DIEPTXF starts at FIFO #1.
     // Both TXFD and TXSA are in unit of 32-bit words.
-    dwc2->dieptxf[epnum - 1] = (fifo_size << DIEPTXF_INEPTXFD_Pos) | (DWC2_EP_FIFO_SIZE/4 - _allocated_fifo_words_tx);
+    dwc2->dieptxf[epnum - 1] = (fifo_size << DIEPTXF_INEPTXFD_Pos) | (_dwc2_controller[rhport].ep_fifo_size/4 - _allocated_fifo_words_tx);
 
     dwc2->epin[epnum].diepctl |= (1 << DIEPCTL_USBAEP_Pos) |
                                  (epnum << DIEPCTL_TXFNUM_Pos) |
@@ -680,14 +715,13 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 // Close all non-control endpoints, cancel all pending transfers if any.
 void dcd_edpt_close_all (uint8_t rhport)
 {
-  (void) rhport;
-
-  dwc2_regs_t * dwc2 = DWC2_REG(rhport);
+  dwc2_regs_t * dwc2     = DWC2_REG(rhport);
+  uint8_t const ep_count = _dwc2_controller[rhport].ep_count;
 
   // Disable non-control interrupt
   dwc2->daintmsk = (1 << DAINTMSK_OEPM_Pos) | (1 << DAINTMSK_IEPM_Pos);
 
-  for(uint8_t n = 1; n < DWC2_EP_MAX; n++)
+  for(uint8_t n = 1; n < ep_count; n++)
   {
     // disable OUT endpoint
     dwc2->epout[n].doepctl = 0;
@@ -796,8 +830,7 @@ static void dcd_edpt_disable (uint8_t rhport, uint8_t ep_addr, bool stall)
     }
 
     // Flush the FIFO, and wait until we have confirmed it cleared.
-    dwc2->grstctl |= (epnum << GRSTCTL_TXFNUM_Pos);
-    dwc2->grstctl |= GRSTCTL_TXFFLSH;
+    dwc2->grstctl = ((epnum << GRSTCTL_TXFNUM_Pos) | GRSTCTL_TXFFLSH);
     while ( (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) != 0 ) {}
   }
   else
@@ -849,8 +882,9 @@ void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr)
   {
     uint16_t const fifo_size = (dwc2->dieptxf[epnum - 1] & DIEPTXF_INEPTXFD_Msk) >> DIEPTXF_INEPTXFD_Pos;
     uint16_t const fifo_start = (dwc2->dieptxf[epnum - 1] & DIEPTXF_INEPTXSA_Msk) >> DIEPTXF_INEPTXSA_Pos;
+
     // For now only the last opened endpoint can be closed without fuss.
-    TU_ASSERT(fifo_start == DWC2_EP_FIFO_SIZE/4 - _allocated_fifo_words_tx,);
+    TU_ASSERT(fifo_start == _dwc2_controller[rhport].ep_fifo_size/4 - _allocated_fifo_words_tx,);
     _allocated_fifo_words_tx -= fifo_size;
   }
   else
@@ -1053,11 +1087,12 @@ static void handle_rxflvl_irq(uint8_t rhport)
 
 static void handle_epout_irq (uint8_t rhport)
 {
-  dwc2_regs_t *dwc2 = DWC2_REG(rhport);
+  dwc2_regs_t * dwc2     = DWC2_REG(rhport);
+  uint8_t const ep_count = _dwc2_controller[rhport].ep_count;
 
   // DAINT for a given EP clears when DOEPINTx is cleared.
   // OEPINT will be cleared when DAINT's out bits are cleared.
-  for ( uint8_t n = 0; n < DWC2_EP_MAX; n++ )
+  for ( uint8_t n = 0; n < ep_count; n++ )
   {
     if ( dwc2->daint & TU_BIT(DAINT_OEPINT_Pos + n) )
     {
@@ -1104,12 +1139,13 @@ static void handle_epout_irq (uint8_t rhport)
 
 static void handle_epin_irq (uint8_t rhport)
 {
-  dwc2_regs_t *dwc2 = DWC2_REG(rhport);
-  dwc2_epin_t* epin = dwc2->epin;
+  dwc2_regs_t * dwc2     = DWC2_REG(rhport);
+  uint8_t const ep_count = _dwc2_controller[rhport].ep_count;
+  dwc2_epin_t* epin      = dwc2->epin;
 
   // DAINT for a given EP clears when DIEPINTx is cleared.
   // IEPINT will be cleared when DAINT's out bits are cleared.
-  for ( uint8_t n = 0; n < DWC2_EP_MAX; n++ )
+  for ( uint8_t n = 0; n < ep_count; n++ )
   {
     if ( dwc2->daint & TU_BIT(DAINT_IEPINT_Pos + n) )
     {
@@ -1251,8 +1287,16 @@ void dcd_int_handler(uint8_t rhport)
   {
     dwc2->gotgint = GINTSTS_SOF;
 
-    // Disable SOF interrupt since currently only used for remote wakeup detection
-    dwc2->gintmsk &= ~GINTMSK_SOFM;
+    if (_sof_en)
+    {
+      uint32_t frame = (dwc2->dsts & (DSTS_FNSOF)) >> 8;
+      dcd_event_sof(rhport, frame, true);
+    }
+    else
+    {
+      // Disable SOF interrupt if SOF was not explicitly enabled. SOF was used for remote wakeup detection
+      dwc2->gintmsk &= ~GINTMSK_SOFM;
+    }
 
     dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true);
   }
diff --git a/src/portable/synopsys/dwc2/dwc2_bcm.h b/src/portable/synopsys/dwc2/dwc2_bcm.h
index 14194e754..732d96ae0 100644
--- a/src/portable/synopsys/dwc2/dwc2_bcm.h
+++ b/src/portable/synopsys/dwc2/dwc2_bcm.h
@@ -35,9 +35,12 @@
 #include "broadcom/interrupts.h"
 #include "broadcom/caches.h"
 
-#define DWC2_REG_BASE       USB_OTG_GLOBAL_BASE
 #define DWC2_EP_MAX         8
-#define DWC2_EP_FIFO_SIZE   4096
+
+static const dwc2_controller_t _dwc2_controller[] =
+{
+  { .reg_base = USB_OTG_GLOBAL_BASE, .irqnum = USB_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = 4096 }
+};
 
 #define dcache_clean(_addr, _size)              data_clean(_addr, _size)
 #define dcache_invalidate(_addr, _size)         data_invalidate(_addr, _size)
@@ -46,15 +49,13 @@
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_enable(uint8_t rhport)
 {
-  (void) rhport;
-  BP_EnableIRQ(USB_IRQn);
+  BP_EnableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_disable (uint8_t rhport)
 {
-  (void) rhport;
-  BP_DisableIRQ(USB_IRQn);
+  BP_DisableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 static inline void dwc2_remote_wakeup_delay(void)
diff --git a/src/portable/synopsys/dwc2/dwc2_efm32.h b/src/portable/synopsys/dwc2/dwc2_efm32.h
index ee4c3c715..0e3570cbb 100644
--- a/src/portable/synopsys/dwc2/dwc2_efm32.h
+++ b/src/portable/synopsys/dwc2/dwc2_efm32.h
@@ -37,20 +37,22 @@
 // EFM32 has custom control register before DWC registers
 #define DWC2_REG_BASE       (USB_BASE + offsetof(USB_TypeDef, GOTGCTL))
 #define DWC2_EP_MAX         7
-#define DWC2_EP_FIFO_SIZE   2048
+
+static const dwc2_controller_t _dwc2_controller[] =
+{
+  { .reg_base = DWC2_REG_BASE, .irqnum = USB_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = 2048 }
+};
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_enable(uint8_t rhport)
 {
-  (void) rhport;
-  NVIC_EnableIRQ(USB_IRQn);
+  NVIC_EnableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_disable (uint8_t rhport)
 {
-  (void) rhport;
-  NVIC_DisableIRQ(USB_IRQn);
+  NVIC_DisableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 static inline void dwc2_remote_wakeup_delay(void)
diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h
index 78da277d5..c50dd66b8 100644
--- a/src/portable/synopsys/dwc2/dwc2_esp32.h
+++ b/src/portable/synopsys/dwc2/dwc2_esp32.h
@@ -37,10 +37,12 @@
 //#include "soc/usb_periph.h"
 
 #define DWC2_REG_BASE       0x60080000UL
-#define DWC2_EP_MAX         5             // USB_OUT_EP_NUM
-#define DWC2_EP_FIFO_SIZE   1024
+#define DWC2_EP_MAX         6             // USB_OUT_EP_NUM. TODO ESP32Sx only has 5 tx fifo (5 endpoint IN)
 
-// #define EP_FIFO_NUM 5
+static const dwc2_controller_t _dwc2_controller[] =
+{
+  { .reg_base = DWC2_REG_BASE, .irqnum = 0, .ep_count = DWC2_EP_MAX, .ep_fifo_size = 1024 }
+};
 
 static intr_handle_t usb_ih;
 
diff --git a/src/portable/synopsys/dwc2/dwc2_gd32.h b/src/portable/synopsys/dwc2/dwc2_gd32.h
index f8fa01ee0..0375fffe4 100644
--- a/src/portable/synopsys/dwc2/dwc2_gd32.h
+++ b/src/portable/synopsys/dwc2/dwc2_gd32.h
@@ -34,8 +34,11 @@
 
 #define DWC2_REG_BASE       0x50000000UL
 #define DWC2_EP_MAX         4
-#define DWC2_EP_FIFO_SIZE   1280
-#define RHPORT_IRQn         86
+
+static const dwc2_controller_t _dwc2_controller[] =
+{
+  { .reg_base = DWC2_REG_BASE, .irqnum = 86, .ep_count = DWC2_EP_MAX, .ep_fifo_size = 1280 }
+};
 
 extern uint32_t SystemCoreClock;
 
@@ -57,15 +60,13 @@ static inline void __eclic_disable_interrupt (uint32_t irq){
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_enable(uint8_t rhport)
 {
-  (void) rhport;
-  __eclic_enable_interrupt(RHPORT_IRQn);
+  __eclic_enable_interrupt(_dwc2_controller[rhport].irqnum);
 }
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_disable (uint8_t rhport)
 {
-  (void) rhport;
-  __eclic_disable_interrupt(RHPORT_IRQn);
+  __eclic_disable_interrupt(_dwc2_controller[rhport].irqnum);
 }
 
 static inline void dwc2_remote_wakeup_delay(void)
diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h
index 469045ac4..ea786362e 100644
--- a/src/portable/synopsys/dwc2/dwc2_stm32.h
+++ b/src/portable/synopsys/dwc2/dwc2_stm32.h
@@ -43,10 +43,14 @@
   #define EP_MAX_FS       USB_OTG_FS_MAX_IN_ENDPOINTS
   #define EP_FIFO_SIZE_FS USB_OTG_FS_TOTAL_FIFO_SIZE
 
+  #define EP_MAX_HS       USB_OTG_HS_MAX_IN_ENDPOINTS
+  #define EP_FIFO_SIZE_HS USB_OTG_HS_TOTAL_FIFO_SIZE
+
 #elif CFG_TUSB_MCU == OPT_MCU_STM32F4
   #include "stm32f4xx.h"
   #define EP_MAX_FS       USB_OTG_FS_MAX_IN_ENDPOINTS
   #define EP_FIFO_SIZE_FS USB_OTG_FS_TOTAL_FIFO_SIZE
+
   #define EP_MAX_HS       USB_OTG_HS_MAX_IN_ENDPOINTS
   #define EP_FIFO_SIZE_HS USB_OTG_HS_TOTAL_FIFO_SIZE
 
@@ -54,13 +58,22 @@
   #include "stm32h7xx.h"
   #define EP_MAX_FS       9
   #define EP_FIFO_SIZE_FS 4096
+
   #define EP_MAX_HS       9
   #define EP_FIFO_SIZE_HS 4096
 
+  // NOTE: H7 with only 1 USB port: H72x / H73x / H7Ax / H7Bx
+  // USB_OTG_FS_PERIPH_BASE and OTG_FS_IRQn not defined
+  #if (! defined USB2_OTG_FS)
+    #define USB_OTG_FS_PERIPH_BASE  USB1_OTG_HS_PERIPH_BASE
+    #define OTG_FS_IRQn             OTG_HS_IRQn
+  #endif
+
 #elif CFG_TUSB_MCU == OPT_MCU_STM32F7
   #include "stm32f7xx.h"
   #define EP_MAX_FS       6
   #define EP_FIFO_SIZE_FS 1280
+
   #define EP_MAX_HS       9
   #define EP_FIFO_SIZE_HS 4096
 
@@ -69,39 +82,53 @@
   #define EP_MAX_FS       6
   #define EP_FIFO_SIZE_FS 1280
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32U5
+  #include "stm32u5xx.h"
+  #define USB_OTG_FS_PERIPH_BASE       USB_OTG_FS_BASE
+  #define EP_MAX_FS       6
+  #define EP_FIFO_SIZE_FS 1280
+
 #else
   #error "Unsupported MCUs"
 #endif
 
-// On STM32 we associate Port0 to OTG_FS, and Port1 to OTG_HS
-#if TUD_OPT_RHPORT == 0
-  #define DWC2_REG_BASE       USB_OTG_FS_PERIPH_BASE
-  #define DWC2_EP_MAX         EP_MAX_FS
-  #define DWC2_EP_FIFO_SIZE   EP_FIFO_SIZE_FS
-  #define RHPORT_IRQn         OTG_FS_IRQn
-
+// OTG HS always has higher number of endpoints than FS
+#ifdef USB_OTG_HS_PERIPH_BASE
+  #define DWC2_EP_MAX   EP_MAX_HS
 #else
-  #define DWC2_REG_BASE       USB_OTG_HS_PERIPH_BASE
-  #define DWC2_EP_MAX         EP_MAX_HS
-  #define DWC2_EP_FIFO_SIZE   EP_FIFO_SIZE_HS
-  #define RHPORT_IRQn         OTG_HS_IRQn
+  #define DWC2_EP_MAX   EP_MAX_FS
+#endif
 
+// On STM32 for consistency we associate
+// - Port0 to OTG_FS, and Port1 to OTG_HS
+static const dwc2_controller_t _dwc2_controller[] =
+{
+#ifdef USB_OTG_FS_PERIPH_BASE
+  { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = OTG_FS_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS },
+#endif
+
+#ifdef USB_OTG_HS_PERIPH_BASE
+  { .reg_base = USB_OTG_HS_PERIPH_BASE, .irqnum = OTG_HS_IRQn, .ep_count = EP_MAX_HS, .ep_fifo_size = EP_FIFO_SIZE_HS },
 #endif
+};
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
 
-extern uint32_t SystemCoreClock;
+// SystemCoreClock is alrady included by family header
+// extern uint32_t SystemCoreClock;
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_enable(uint8_t rhport)
 {
-  (void) rhport;
-  NVIC_EnableIRQ(RHPORT_IRQn);
+  NVIC_EnableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_disable (uint8_t rhport)
 {
-  (void) rhport;
-  NVIC_DisableIRQ(RHPORT_IRQn);
+  NVIC_DisableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 TU_ATTR_ALWAYS_INLINE
diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h
index 7fa2028eb..3fc979337 100644
--- a/src/portable/synopsys/dwc2/dwc2_type.h
+++ b/src/portable/synopsys/dwc2/dwc2_type.h
@@ -19,6 +19,19 @@
 
 #include "stdint.h"
 
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// Controller
+typedef struct
+{
+  uintptr_t reg_base;
+  uint32_t  irqnum;
+  uint8_t   ep_count;
+  uint32_t  ep_fifo_size;
+}dwc2_controller_t;
+
 /* DWC OTG HW Release versions */
 #define DWC2_CORE_REV_2_71a   0x4f54271a
 #define DWC2_CORE_REV_2_72a   0x4f54272a
@@ -40,10 +53,6 @@
 #define DWC2_FS_IOT_ID        0x55310000
 #define DWC2_HS_IOT_ID        0x55320000
 
-#ifdef __cplusplus
- extern "C" {
-#endif
-
 #if 0
 // HS PHY
 typedef struct
diff --git a/src/portable/synopsys/dwc2/dwc2_xmc.h b/src/portable/synopsys/dwc2/dwc2_xmc.h
index 4e6bebb01..63419abf7 100644
--- a/src/portable/synopsys/dwc2/dwc2_xmc.h
+++ b/src/portable/synopsys/dwc2/dwc2_xmc.h
@@ -34,23 +34,24 @@
 
 #include "xmc_device.h"
 
-// XMC has custom control register before DWC registers
-#define DWC2_REG_BASE       USB0_BASE
 #define DWC2_EP_MAX         7
-#define DWC2_EP_FIFO_SIZE   2048
+
+static const dwc2_controller_t _dwc2_controller[] =
+{
+  // Note: XMC has some custom control registers before DWC registers
+  { .reg_base = USB0_BASE, .irqnum = USB0_0_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = 2048 }
+};
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_enable(uint8_t rhport)
 {
-  (void) rhport;
-  NVIC_EnableIRQ(USB0_0_IRQn);
+  NVIC_EnableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 TU_ATTR_ALWAYS_INLINE
 static inline void dwc2_dcd_int_disable (uint8_t rhport)
 {
-  (void) rhport;
-  NVIC_DisableIRQ(USB0_0_IRQn);
+  NVIC_DisableIRQ(_dwc2_controller[rhport].irqnum);
 }
 
 static inline void dwc2_remote_wakeup_delay(void)
diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c
index 977369300..26b5dce9d 100644
--- a/src/portable/template/dcd_template.c
+++ b/src/portable/template/dcd_template.c
@@ -82,6 +82,14 @@ void dcd_disconnect(uint8_t rhport)
   (void) rhport;
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
index c3b3b2403..b4dfda575 100644
--- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
+++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
@@ -222,6 +222,14 @@ void dcd_disconnect(uint8_t rhport)
   dcd_int_enable(rhport);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
+
 /*------------------------------------------------------------------*/
 /* DCD Endpoint port
  *------------------------------------------------------------------*/
@@ -623,7 +631,18 @@ void dcd_int_handler(uint8_t rhport)
     handle_setup_packet();
   }
 
-  uint16_t curr_vector = USBVECINT;
+  // Workaround possible bug in MSP430 GCC 9.3.0 where volatile variable
+  // USBVECINT is read from twice when only once is intended. The second
+  // (garbage) read seems to be triggered by certain switch statement
+  // configurations.
+  uint16_t curr_vector;
+  #if __GNUC__ > 9 || (__GNUC__ == 9 && __GNUC_MINOR__ > 2)
+    asm volatile ("mov %1, %0"
+                  : "=r" (curr_vector)
+                  : "m" (USBVECINT));
+  #else
+    curr_vector = USBVECINT;
+  #endif
 
   switch(curr_vector)
   {
diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c
index dfadfdcb3..e368b5f39 100644
--- a/src/portable/valentyusb/eptri/dcd_eptri.c
+++ b/src/portable/valentyusb/eptri/dcd_eptri.c
@@ -401,6 +401,13 @@ void dcd_disconnect(uint8_t rhport)
   usb_pullup_out_write(0);
 }
 
+void dcd_sof_enable(uint8_t rhport, bool en)
+{
+  (void) rhport;
+  (void) en;
+
+  // TODO implement later
+}
 
 //--------------------------------------------------------------------+
 // DCD Endpoint Port