diff options
Diffstat (limited to 'examples')
21 files changed, 468 insertions, 579 deletions
diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt new file mode 100644 index 000000000..4ed693cde --- /dev/null +++ b/examples/device/CMakeLists.txt @@ -0,0 +1,27 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake) + +project(tinyusb_device_examples) +family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) + +# family_add_subdirectory will filter what to actually add based on selected FAMILY +family_add_subdirectory(audio_4_channel_mic) +family_add_subdirectory(audio_test) +family_add_subdirectory(board_test) +family_add_subdirectory(cdc_dual_ports) +family_add_subdirectory(cdc_msc) +family_add_subdirectory(cdc_msc_freertos) +family_add_subdirectory(dfu) +family_add_subdirectory(dfu_runtime) +family_add_subdirectory(dynamic_configuration) +family_add_subdirectory(hid_composite) +family_add_subdirectory(hid_composite_freertos) +family_add_subdirectory(hid_generic_inout) +family_add_subdirectory(hid_multiple_interface) +family_add_subdirectory(midi_test) +family_add_subdirectory(msc_dual_lun) +family_add_subdirectory(net_lwip_webserver) +family_add_subdirectory(uac2_headset) +family_add_subdirectory(usbtmc) +family_add_subdirectory(webusb_serial) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index f2c81c4d3..b653fc91f 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -1,37 +1,28 @@ -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index f2c81c4d3..fac0ca64f 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -1,37 +1,28 @@ -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index c41ad92ab..8cd5b9ea4 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -1,44 +1,43 @@ cmake_minimum_required(VERSION 3.5) -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) - -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) # Check for -DFAMILY= if(FAMILY MATCHES "^esp32s[2-3]") - cmake_minimum_required(VERSION 3.5) + # use BOARD-Directory name for project id + get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + set(PROJECT ${BOARD}-${PROJECT}) + + # TOP is absolute path to root directory of TinyUSB git repo + set(TOP "../../..") + get_filename_component(TOP "${TOP}" REALPATH) include(${TOP}/hw/bsp/${FAMILY}/family.cmake) project(${PROJECT}) -elseif(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) +else() + + # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) + family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + project(${PROJECT}) - add_executable(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + # Checks this example is valid for the family and initializes the project + family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + + add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) - -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") + # Configure compilation flags and libraries for the example... see the corresponding function + # in hw/bsp/FAMILY/family.cmake for details. + family_configure_device_example(${PROJECT}) endif() diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index 4160c0c88..18367a893 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index 7db520dd1..c7e87bf67 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -64,8 +64,9 @@ #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE +#endif // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 6c828a396..5da761a04 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index 4160c0c88..18367a893 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index 2bac7c329..18367a893 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index a99b755d3..5da761a04 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index 3b677b3b1..18367a893 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index 2bac7c329..18367a893 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index 2bac7c329..18367a893 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index 2bac7c329..18367a893 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 8b4722278..f60be8eda 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 4325b4ea6..f1f79b2d1 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -1,84 +1,81 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +if (EXISTS ${TOP}/lib/lwip/src) + include(${TOP}/hw/bsp/${FAMILY}/family.cmake) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) + # gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) + family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - # lwip Stack source - set(SRC_LWIP - ${TOP}/lib/lwip/src/core/altcp.c - ${TOP}/lib/lwip/src/core/altcp_alloc.c - ${TOP}/lib/lwip/src/core/altcp_tcp.c - ${TOP}/lib/lwip/src/core/def.c - ${TOP}/lib/lwip/src/core/dns.c - ${TOP}/lib/lwip/src/core/inet_chksum.c - ${TOP}/lib/lwip/src/core/init.c - ${TOP}/lib/lwip/src/core/ip.c - ${TOP}/lib/lwip/src/core/mem.c - ${TOP}/lib/lwip/src/core/memp.c - ${TOP}/lib/lwip/src/core/netif.c - ${TOP}/lib/lwip/src/core/pbuf.c - ${TOP}/lib/lwip/src/core/raw.c - ${TOP}/lib/lwip/src/core/stats.c - ${TOP}/lib/lwip/src/core/sys.c - ${TOP}/lib/lwip/src/core/tcp.c - ${TOP}/lib/lwip/src/core/tcp_in.c - ${TOP}/lib/lwip/src/core/tcp_out.c - ${TOP}/lib/lwip/src/core/timeouts.c - ${TOP}/lib/lwip/src/core/udp.c - ${TOP}/lib/lwip/src/core/ipv4/autoip.c - ${TOP}/lib/lwip/src/core/ipv4/dhcp.c - ${TOP}/lib/lwip/src/core/ipv4/etharp.c - ${TOP}/lib/lwip/src/core/ipv4/icmp.c - ${TOP}/lib/lwip/src/core/ipv4/igmp.c - ${TOP}/lib/lwip/src/core/ipv4/ip4.c - ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c - ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c - ${TOP}/lib/lwip/src/netif/ethernet.c - ${TOP}/lib/lwip/src/netif/slipif.c - ${TOP}/lib/lwip/src/apps/http/httpd.c - ${TOP}/lib/lwip/src/apps/http/fs.c - ${TOP}/lib/networking/dhserver.c - ${TOP}/lib/networking/dnserver.c - ${TOP}/lib/networking/rndis_reports.c - ) + project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ${SRC_LWIP} - ) + # Checks this example is valid for the family and initializes the project + family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ${TOP}/lib/lwip/src/include - ${TOP}/lib/lwip/src/include/ipv4 - ${TOP}/lib/lwip/src/include/lwip/apps - ${TOP}/lib/networking - ) + add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - PBUF_POOL_SIZE=2 - TCP_WND=2*TCP_MSS - HTTPD_USE_CUSTOM_FSDATA=0 - ) + # Example source + target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() + # Example include + target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ${TOP}/lib/lwip/src/include + ${TOP}/lib/lwip/src/include/ipv4 + ${TOP}/lib/lwip/src/include/lwip/apps + ${TOP}/lib/networking + ) + + target_sources(${PROJECT} PUBLIC + ${TOP}/lib/lwip/src/core/altcp.c + ${TOP}/lib/lwip/src/core/altcp_alloc.c + ${TOP}/lib/lwip/src/core/altcp_tcp.c + ${TOP}/lib/lwip/src/core/def.c + ${TOP}/lib/lwip/src/core/dns.c + ${TOP}/lib/lwip/src/core/inet_chksum.c + ${TOP}/lib/lwip/src/core/init.c + ${TOP}/lib/lwip/src/core/ip.c + ${TOP}/lib/lwip/src/core/mem.c + ${TOP}/lib/lwip/src/core/memp.c + ${TOP}/lib/lwip/src/core/netif.c + ${TOP}/lib/lwip/src/core/pbuf.c + ${TOP}/lib/lwip/src/core/raw.c + ${TOP}/lib/lwip/src/core/stats.c + ${TOP}/lib/lwip/src/core/sys.c + ${TOP}/lib/lwip/src/core/tcp.c + ${TOP}/lib/lwip/src/core/tcp_in.c + ${TOP}/lib/lwip/src/core/tcp_out.c + ${TOP}/lib/lwip/src/core/timeouts.c + ${TOP}/lib/lwip/src/core/udp.c + ${TOP}/lib/lwip/src/core/ipv4/autoip.c + ${TOP}/lib/lwip/src/core/ipv4/dhcp.c + ${TOP}/lib/lwip/src/core/ipv4/etharp.c + ${TOP}/lib/lwip/src/core/ipv4/icmp.c + ${TOP}/lib/lwip/src/core/ipv4/igmp.c + ${TOP}/lib/lwip/src/core/ipv4/ip4.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c + ${TOP}/lib/lwip/src/netif/ethernet.c + ${TOP}/lib/lwip/src/netif/slipif.c + ${TOP}/lib/lwip/src/apps/http/httpd.c + ${TOP}/lib/lwip/src/apps/http/fs.c + ${TOP}/lib/networking/dhserver.c + ${TOP}/lib/networking/dnserver.c + ${TOP}/lib/networking/rndis_reports.c + ) + + target_compile_definitions(${PROJECT} PUBLIC + PBUF_POOL_SIZE=2 + TCP_WND=2*TCP_MSS + HTTPD_USE_CUSTOM_FSDATA=0 + ) + + # Configure compilation flags and libraries for the example... see the corresponding function + # in hw/bsp/FAMILY/family.cmake for details. + family_configure_device_example(${PROJECT}) +endif()
\ No newline at end of file diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index 2bac7c329..18367a893 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index c14595dbe..4306da8cb 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index 2bac7c329..18367a893 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT})
\ No newline at end of file diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt new file mode 100644 index 000000000..c70d11d5b --- /dev/null +++ b/examples/host/CMakeLists.txt @@ -0,0 +1,9 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake) + +project(tinyusb_host_examples) +family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) + +# family_add_subdirectory will filter what to actually add based on selected FAMILY +family_add_subdirectory(cdc_msc_hid) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index ac57bf6dd..ad0f412e2 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT})
\ No newline at end of file |