diff options
Diffstat (limited to 'examples')
228 files changed, 2560 insertions, 2534 deletions
diff --git a/examples/CMakeLists.txt b/examples/CMakeLists.txt index c603d0c22..d34c6ed5d 100644 --- a/examples/CMakeLists.txt +++ b/examples/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) #set(CMAKE_EXPORT_COMPILE_COMMANDS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../hw/bsp/family_support.cmake) diff --git a/examples/CMakePresets.json b/examples/CMakePresets.json new file mode 100644 index 000000000..2f904a269 --- /dev/null +++ b/examples/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/build_system/cmake/cpu/cortex-m85.cmake b/examples/build_system/cmake/cpu/cortex-m85.cmake new file mode 100644 index 000000000..30314acbc --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m85.cmake @@ -0,0 +1,25 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m85 + -mfloat-abi=hard + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-m85 + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m85 + --fpu VFPv5_D16 + ) + set(FREERTOS_PORT IAR_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/toolchain/aarch64_gcc.cmake b/examples/build_system/cmake/toolchain/aarch64_gcc.cmake index 2d30a0b71..ac1e482eb 100644 --- a/examples/build_system/cmake/toolchain/aarch64_gcc.cmake +++ b/examples/build_system/cmake/toolchain/aarch64_gcc.cmake @@ -7,9 +7,9 @@ if (NOT DEFINED CMAKE_CXX_COMPILER) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE "aarch64-none-elf-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "aarch64-none-elf-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "aarch64-none-elf-objdump" CACHE FILEPATH "") +find_program(CMAKE_SIZE aarch64-none-elf-size) +find_program(CMAKE_OBJCOPY aarch64-none-elf-objcopy) +find_program(CMAKE_OBJDUMP aarch64-none-elf-objdump) include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/cmake/toolchain/arm_clang.cmake b/examples/build_system/cmake/toolchain/arm_clang.cmake index 754d672fd..fe3c2b453 100644 --- a/examples/build_system/cmake/toolchain/arm_clang.cmake +++ b/examples/build_system/cmake/toolchain/arm_clang.cmake @@ -7,9 +7,9 @@ if (NOT DEFINED CMAKE_CXX_COMPILER) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE "llvm-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "llvm-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "llvm-objdump" CACHE FILEPATH "") +find_program(CMAKE_SIZE llvm-size) +find_program(CMAKE_OBJCOPY llvm-objcopy) +find_program(CMAKE_OBJDUMP llvm-objdump) include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/cmake/toolchain/arm_gcc.cmake b/examples/build_system/cmake/toolchain/arm_gcc.cmake index d3d73c629..6a660e259 100644 --- a/examples/build_system/cmake/toolchain/arm_gcc.cmake +++ b/examples/build_system/cmake/toolchain/arm_gcc.cmake @@ -1,3 +1,7 @@ +if (RTOS STREQUAL zephyr) + return() +endif () + if (NOT DEFINED CMAKE_C_COMPILER) set(CMAKE_C_COMPILER "arm-none-eabi-gcc") endif () @@ -7,9 +11,9 @@ if (NOT DEFINED CMAKE_CXX_COMPILER) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE "arm-none-eabi-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "arm-none-eabi-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "arm-none-eabi-objdump" CACHE FILEPATH "") +find_program(CMAKE_SIZE arm-none-eabi-size) +find_program(CMAKE_OBJCOPY arm-none-eabi-objcopy) +find_program(CMAKE_OBJDUMP arm-none-eabi-objdump) include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/cmake/toolchain/arm_iar.cmake b/examples/build_system/cmake/toolchain/arm_iar.cmake index 6d2219ca8..083815715 100644 --- a/examples/build_system/cmake/toolchain/arm_iar.cmake +++ b/examples/build_system/cmake/toolchain/arm_iar.cmake @@ -10,8 +10,8 @@ if (NOT DEFINED CMAKE_ASM_COMPILER) set(CMAKE_ASM_COMPILER "iasmarm") endif() -set(CMAKE_SIZE "size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "ielftool" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "iefdumparm" CACHE FILEPATH "") +find_program(CMAKE_SIZE size) +find_program(CMAKE_OBJCOPY ielftool) +find_program(CMAKE_OBJDUMP iefdumparm) include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index 688715914..4c181137b 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -4,6 +4,7 @@ include(CMakePrintHelpers) # Common # ---------------------------------------------------------------------------- set(CMAKE_SYSTEM_NAME Generic) +set(CMAKE_SYSTEM_PROCESSOR ${CMAKE_SYSTEM_CPU}) set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) # Look for includes and libraries only in the target system prefix. @@ -13,8 +14,8 @@ set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) # pass TOOLCHAIN_CPU to -set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR) -include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_PROCESSOR}.cmake) +set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR CMAKE_SYSTEM_CPU) +include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_CPU}.cmake) # ---------------------------------------------------------------------------- # Compile flags diff --git a/examples/build_system/cmake/toolchain/msp430_gcc.cmake b/examples/build_system/cmake/toolchain/msp430_gcc.cmake index 73368adba..799518931 100644 --- a/examples/build_system/cmake/toolchain/msp430_gcc.cmake +++ b/examples/build_system/cmake/toolchain/msp430_gcc.cmake @@ -8,8 +8,8 @@ endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE "msp430-elf-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "msp430-elf-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "msp430-elf-objdump" CACHE FILEPATH "") +find_program(CMAKE_SIZE msp430-elf-size) +find_program(CMAKE_OBJCOPY msp430-elf-objcopy) +find_program(CMAKE_OBJDUMP msp430-elf-objdump) include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/cmake/toolchain/riscv_gcc.cmake b/examples/build_system/cmake/toolchain/riscv_gcc.cmake index d788df023..60a24528b 100644 --- a/examples/build_system/cmake/toolchain/riscv_gcc.cmake +++ b/examples/build_system/cmake/toolchain/riscv_gcc.cmake @@ -16,9 +16,9 @@ if (NOT DEFINED CMAKE_CXX_COMPILER) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE ${CROSS_COMPILE}size CACHE FILEPATH "") -set(CMAKE_OBJCOPY ${CROSS_COMPILE}objcopy CACHE FILEPATH "") -set(CMAKE_OBJDUMP ${CROSS_COMPILE}objdump CACHE FILEPATH "") +find_program(CMAKE_SIZE ${CROSS_COMPILE}size) +find_program(CMAKE_OBJCOPY ${CROSS_COMPILE}objcopy) +find_program(CMAKE_OBJDUMP ${CROSS_COMPILE}objdump) include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/make/cpu/cortex-m85.mk b/examples/build_system/make/cpu/cortex-m85.mk new file mode 100644 index 000000000..75e8f3aaf --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m85.mk @@ -0,0 +1,27 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m85 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + --target=arm-none-eabi \ + -mcpu=cortex-m85 \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m85 \ + --fpu VFPv5_D16 \ + + ASFLAGS += \ + --cpu cortex-m85 \ + --fpu VFPv5_D16 \ + +else + $(error "TOOLCHAIN is not supported") +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM85_NTZ/non_secure diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk index 1500a51e0..3101b66b9 100644 --- a/examples/build_system/make/make.mk +++ b/examples/build_system/make/make.mk @@ -6,7 +6,6 @@ # Toolchain # Can be changed via TOOLCHAIN=gcc|iar or CC=arm-none-eabi-gcc|iccarm|clang #------------------------------------------------------------- - ifneq (,$(findstring clang,$(CC))) TOOLCHAIN = clang else ifneq (,$(findstring iccarm,$(CC))) @@ -65,7 +64,9 @@ BUILD := _build/$(BOARD) PROJECT := $(notdir $(CURDIR)) BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) -#-------------- Select the board to build for. ------------ +#------------------------------------------------------------- +# Board / Family +#------------------------------------------------------------- # Board without family ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) @@ -93,7 +94,9 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -#-------------- Source files and compiler flags -------------- +#------------------------------------------------------------- +# Source files and compiler flags +#------------------------------------------------------------- # tinyusb makefile include $(TOP)/src/tinyusb.mk SRC_C += $(TINYUSB_SRC_C) @@ -148,7 +151,37 @@ endif # toolchain specific include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk -# Handy check parameter function +#---------------------- FreeRTOS ----------------------- +FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) + +ifeq ($(RTOS),freertos) + SRC_C += \ + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) + + SRC_S += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) + INC += \ + $(TOP)/hw/bsp/$(FAMILY)/FreeRTOSConfig \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_PORTABLE_SRC) + + CFLAGS += -DCFG_TUSB_OS=OPT_OS_FREERTOS + + # Suppress FreeRTOSConfig.h warnings + CFLAGS_GCC += -Wno-error=redundant-decls + + # Suppress FreeRTOS source warnings + CFLAGS_GCC += -Wno-error=cast-qual + + # FreeRTOS (lto + Os) linker issue + LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext +endif + +#---------------- Helper ---------------- check_defined = \ $(strip $(foreach 1,$1, \ $(call __check_defined,$1,$(strip $(value 2))))) diff --git a/examples/build_system/make/rules.mk b/examples/build_system/make/rules.mk index f322dbae6..86de17b6c 100644 --- a/examples/build_system/make/rules.mk +++ b/examples/build_system/make/rules.mk @@ -166,6 +166,11 @@ flash-bmp: $(BUILD)/$(PROJECT).elf debug-bmp: $(BUILD)/$(PROJECT).elf $(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $< +# --------------- TI Uniflash ----------------- +DSLITE ?= dslite.sh +flash-uniflash: $(BUILD)/$(PROJECT).hex + ${DSLITE} ${UNIFLASH_OPTION} -f $< + #-------------- Artifacts -------------- # Create binary directory diff --git a/examples/build_system/make/toolchain/gcc_common.mk b/examples/build_system/make/toolchain/gcc_common.mk index 6986d8bba..0cbb6774d 100644 --- a/examples/build_system/make/toolchain/gcc_common.mk +++ b/examples/build_system/make/toolchain/gcc_common.mk @@ -31,6 +31,7 @@ CFLAGS += \ -Wreturn-type \ -Wredundant-decls \ +# -Wmissing-prototypes \ # conversion is too strict for most mcu driver, may be disable sign/int/arith-conversion # -Wconversion diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 638440795..bb7dd0a0f 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) @@ -28,6 +28,7 @@ family_add_subdirectory(midi_test) family_add_subdirectory(msc_dual_lun) family_add_subdirectory(net_lwip_webserver) family_add_subdirectory(uac2_headset) +family_add_subdirectory(uac2_speaker_fb) family_add_subdirectory(usbtmc) family_add_subdirectory(video_capture) family_add_subdirectory(video_capture_2ch) diff --git a/examples/device/CMakePresets.json b/examples/device/CMakePresets.json new file mode 100644 index 000000000..c22e8c0ec --- /dev/null +++ b/examples/device/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index 0f5d36193..c8086ae46 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_4_channel_mic/CMakePresets.json b/examples/device/audio_4_channel_mic/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 10e6fe88a..e8c40309e 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -86,7 +86,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py index d17a908b6..4d61e7f5e 100644..100755 --- a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt index e8ca3751d..c50d4fef7 100644 --- a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -19,7 +19,6 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) diff --git a/examples/device/audio_4_channel_mic_freertos/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic_freertos/Makefile b/examples/device/audio_4_channel_mic_freertos/Makefile index df2cdef4e..bd625b345 100644 --- a/examples/device/audio_4_channel_mic_freertos/Makefile +++ b/examples/device/audio_4_channel_mic_freertos/Makefile @@ -1,38 +1,15 @@ +RTOS = freertos include ../../build_system/make/make.mk -FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) - INC += \ src \ - src/FreeRTOSConfig \ $(TOP)/hw \ - $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) \ # Example source EXAMPLE_SOURCE = \ - src/freertos_hook.c \ src/main.c \ src/usb_descriptors.c SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# FreeRTOS source, all files in port folder -SRC_C += \ - $(FREERTOS_SRC)/list.c \ - $(FREERTOS_SRC)/queue.c \ - $(FREERTOS_SRC)/tasks.c \ - $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) - -SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) - -# Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls - -# FreeRTOS (lto + Os) linker issue -LDFLAGS += -Wl,--undefined=vTaskSwitchContext - include ../../build_system/make/rules.mk diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index 012ca4e74..30cd46e7e 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -4,6 +4,7 @@ mcu:CH32V307 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 +mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx mcu:RP2040 diff --git a/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index 869500ad2..000000000 --- a/examples/device/audio_4_channel_mic_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - -// Include MCU header -#include "bsp/board_mcu.h" - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" -#endif - -// TODO fix later -#if CFG_TUSB_MCU == OPT_MCU_MM32F327X - extern u32 SystemCoreClock; -#else - // FIXME cause redundant-decls warnings - extern uint32_t SystemCoreClock; -#endif - -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) -#define configRUN_FREERTOS_SECURE_ONLY 1 - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 0 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -#ifdef __RX__ -/* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 -#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 - -#else - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ -#if defined(__NVIC_PRIO_BITS) - // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h - #define configPRIO_BITS __NVIC_PRIO_BITS - -#elif defined(__ECLIC_INTCTLBITS) - // RISC-V Bumblebee core from nuclei - #define configPRIO_BITS __ECLIC_INTCTLBITS - -#elif defined(__IASMARM__) - // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. - // Therefore we will hard coded it to minimum value of 2 to get pass ci build. - // IAR user must update this to correct value of the target MCU - #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" - #define configPRIO_BITS 2 - -#else - #error "FreeRTOS configPRIO_BITS to be defined" -#endif - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) - -/* The highest interrupt priority that can be used by any interrupt service -routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL -INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER -PRIORITY THAN THIS! (higher priorities are lower numeric values. */ -#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 - -/* Interrupt priorities used by the kernel port layer itself. These are generic -to all Cortex-M ports, and do not rely on any particular library functions. */ -#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! -See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -#endif - -#endif /* __FREERTOS_CONFIG__H */ diff --git a/examples/device/audio_4_channel_mic_freertos/src/freertos_hook.c b/examples/device/audio_4_channel_mic_freertos/src/freertos_hook.c deleted file mode 100644 index 4920e3fae..000000000 --- a/examples/device/audio_4_channel_mic_freertos/src/freertos_hook.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#include "FreeRTOS.h" -#include "task.h" -#include "common/tusb_common.h" - - -void vApplicationMallocFailedHook(void) -{ - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) -{ - (void) pxTask; - (void) pcTaskName; - - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an - * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is - * used by the Idle task. */ -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) -{ - /* If the buffers to be provided to the Idle task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xIdleTaskTCB; - static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Idle task's - state will be stored. */ - *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; - - /* Pass out the array that will be used as the Idle task's stack. */ - *ppxIdleTaskStackBuffer = uxIdleTaskStack; - - /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configMINIMAL_STACK_SIZE is specified in words, not bytes. */ - *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; -} - -/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the - * application must provide an implementation of vApplicationGetTimerTaskMemory() - * to provide the memory that is used by the Timer service task. */ -void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) -{ - /* If the buffers to be provided to the Timer task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xTimerTaskTCB; - static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Timer - task's state will be stored. */ - *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; - - /* Pass out the array that will be used as the Timer task's stack. */ - *ppxTimerTaskStackBuffer = uxTimerTaskStack; - - /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ - *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; -} - -#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X -#include "iodefine.h" -void vApplicationSetupTimerInterrupt(void) -{ - /* Enable CMT0 */ - unsigned short oldPRCR = SYSTEM.PRCR.WORD; - SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR; - - CMT0.CMCNT = 0; - CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); - CMT0.CMCR.WORD = TU_BIT(6) | 2; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -} -#endif diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 08f49326c..c9de4029a 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -39,7 +39,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -186,14 +186,14 @@ int main(void) #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); @@ -209,7 +209,11 @@ void usb_device_task(void* param) // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py index 8312b4e28..4d5ca28d6 100644..100755 --- a/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 88f20278b..5cd93b0d6 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_test/CMakePresets.json b/examples/device/audio_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index f79bb4468..018c48994 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -79,7 +79,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test/src/plot_audio_samples.py b/examples/device/audio_test/src/plot_audio_samples.py index 1504684a6..ea6aa661e 100644..100755 --- a/examples/device/audio_test/src/plot_audio_samples.py +++ b/examples/device/audio_test/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_test_freertos/CMakeLists.txt b/examples/device/audio_test_freertos/CMakeLists.txt index eb22014fb..6ce9e72fe 100644 --- a/examples/device/audio_test_freertos/CMakeLists.txt +++ b/examples/device/audio_test_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -19,7 +19,6 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) diff --git a/examples/device/audio_test_freertos/CMakePresets.json b/examples/device/audio_test_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_freertos/Makefile b/examples/device/audio_test_freertos/Makefile index df2cdef4e..bd625b345 100644 --- a/examples/device/audio_test_freertos/Makefile +++ b/examples/device/audio_test_freertos/Makefile @@ -1,38 +1,15 @@ +RTOS = freertos include ../../build_system/make/make.mk -FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) - INC += \ src \ - src/FreeRTOSConfig \ $(TOP)/hw \ - $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) \ # Example source EXAMPLE_SOURCE = \ - src/freertos_hook.c \ src/main.c \ src/usb_descriptors.c SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# FreeRTOS source, all files in port folder -SRC_C += \ - $(FREERTOS_SRC)/list.c \ - $(FREERTOS_SRC)/queue.c \ - $(FREERTOS_SRC)/tasks.c \ - $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) - -SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) - -# Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls - -# FreeRTOS (lto + Os) linker issue -LDFLAGS += -Wl,--undefined=vTaskSwitchContext - include ../../build_system/make/rules.mk diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index c13667f56..650bf355b 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -4,6 +4,7 @@ mcu:CH32V307 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 +mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx mcu:RP2040 diff --git a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index 869500ad2..000000000 --- a/examples/device/audio_test_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - -// Include MCU header -#include "bsp/board_mcu.h" - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" -#endif - -// TODO fix later -#if CFG_TUSB_MCU == OPT_MCU_MM32F327X - extern u32 SystemCoreClock; -#else - // FIXME cause redundant-decls warnings - extern uint32_t SystemCoreClock; -#endif - -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) -#define configRUN_FREERTOS_SECURE_ONLY 1 - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 0 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -#ifdef __RX__ -/* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 -#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 - -#else - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ -#if defined(__NVIC_PRIO_BITS) - // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h - #define configPRIO_BITS __NVIC_PRIO_BITS - -#elif defined(__ECLIC_INTCTLBITS) - // RISC-V Bumblebee core from nuclei - #define configPRIO_BITS __ECLIC_INTCTLBITS - -#elif defined(__IASMARM__) - // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. - // Therefore we will hard coded it to minimum value of 2 to get pass ci build. - // IAR user must update this to correct value of the target MCU - #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" - #define configPRIO_BITS 2 - -#else - #error "FreeRTOS configPRIO_BITS to be defined" -#endif - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) - -/* The highest interrupt priority that can be used by any interrupt service -routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL -INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER -PRIORITY THAN THIS! (higher priorities are lower numeric values. */ -#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 - -/* Interrupt priorities used by the kernel port layer itself. These are generic -to all Cortex-M ports, and do not rely on any particular library functions. */ -#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! -See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -#endif - -#endif /* __FREERTOS_CONFIG__H */ diff --git a/examples/device/audio_test_freertos/src/freertos_hook.c b/examples/device/audio_test_freertos/src/freertos_hook.c deleted file mode 100644 index 4920e3fae..000000000 --- a/examples/device/audio_test_freertos/src/freertos_hook.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#include "FreeRTOS.h" -#include "task.h" -#include "common/tusb_common.h" - - -void vApplicationMallocFailedHook(void) -{ - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) -{ - (void) pxTask; - (void) pcTaskName; - - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an - * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is - * used by the Idle task. */ -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) -{ - /* If the buffers to be provided to the Idle task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xIdleTaskTCB; - static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Idle task's - state will be stored. */ - *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; - - /* Pass out the array that will be used as the Idle task's stack. */ - *ppxIdleTaskStackBuffer = uxIdleTaskStack; - - /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configMINIMAL_STACK_SIZE is specified in words, not bytes. */ - *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; -} - -/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the - * application must provide an implementation of vApplicationGetTimerTaskMemory() - * to provide the memory that is used by the Timer service task. */ -void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) -{ - /* If the buffers to be provided to the Timer task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xTimerTaskTCB; - static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Timer - task's state will be stored. */ - *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; - - /* Pass out the array that will be used as the Timer task's stack. */ - *ppxTimerTaskStackBuffer = uxTimerTaskStack; - - /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ - *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; -} - -#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X -#include "iodefine.h" -void vApplicationSetupTimerInterrupt(void) -{ - /* Enable CMT0 */ - unsigned short oldPRCR = SYSTEM.PRCR.WORD; - SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR; - - CMT0.CMCNT = 0; - CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); - CMT0.CMCR.WORD = TU_BIT(6) | 2; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -} -#endif diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index a3751da40..c5143c3fc 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -38,7 +38,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -133,16 +133,15 @@ int main(void) #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) -void app_main(void) -{ +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { main(); } #endif @@ -156,7 +155,11 @@ void usb_device_task(void* param) // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_freertos/src/plot_audio_samples.py b/examples/device/audio_test_freertos/src/plot_audio_samples.py index 304b2d5de..46738eb3f 100644..100755 --- a/examples/device/audio_test_freertos/src/plot_audio_samples.py +++ b/examples/device/audio_test_freertos/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 8b376a4c3..61c5cbb96 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_test_multi_rate/CMakePresets.json b/examples/device/audio_test_multi_rate/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_multi_rate/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 2ff7f10bd..8fa902a04 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -85,7 +85,7 @@ audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Audio test data -CFG_TUSB_MEM_ALIGN uint8_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; +CFG_TUD_MEM_ALIGN uint8_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; uint16_t startVal = 0; void led_blinking_task(void); @@ -97,7 +97,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py index c92e49957..1f33a003e 100644..100755 --- a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py +++ b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 012eff095..9a604a732 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -15,18 +15,23 @@ if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +if (RTOS STREQUAL zephyr) + set(EXE_NAME app) +else() + set(EXE_NAME ${PROJECT}) + add_executable(${EXE_NAME}) +endif() # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${EXE_NAME} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${EXE_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${EXE_NAME} ${RTOS}) diff --git a/examples/device/board_test/CMakePresets.json b/examples/device/board_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/board_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 91799eb89..2269d45f1 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -67,7 +67,7 @@ int main(void) { } } -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 36eafe807..8ac3bc8de 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -30,11 +30,6 @@ extern "C" { #endif -// board_test example is special example that doesn't enable device or host stack -// This can cause some TinyUSB API missing, this define hack to allow us to fill those API -// to pass the compilation process -#define tud_int_handler(x) - //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- @@ -49,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_dual_ports/CMakePresets.json b/examples/device/cdc_dual_ports/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_dual_ports/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_dual_ports/skip.txt b/examples/device/cdc_dual_ports/skip.txt new file mode 100644 index 000000000..75184e5e5 --- /dev/null +++ b/examples/device/cdc_dual_ports/skip.txt @@ -0,0 +1,2 @@ +board:stm32f407disco +board:stm32f411disco diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index ef12186f2..63ae8a8c9 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -52,7 +52,11 @@ int main(void) { board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index de2505c07..7776eb958 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -98,19 +98,19 @@ enum #define EPNUM_CDC_1_OUT 0x05 #define EPNUM_CDC_1_IN 0x85 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_CDC_0_NOTIF 0x81 +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_0_NOTIF 0x83 #define EPNUM_CDC_0_OUT 0x02 - #define EPNUM_CDC_0_IN 0x83 + #define EPNUM_CDC_0_IN 0x81 - #define EPNUM_CDC_1_NOTIF 0x84 + #define EPNUM_CDC_1_NOTIF 0x86 #define EPNUM_CDC_1_OUT 0x05 - #define EPNUM_CDC_1_IN 0x86 + #define EPNUM_CDC_1_IN 0x84 -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_0_NOTIF 0x81 #define EPNUM_CDC_0_OUT 0x02 diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 9415f8c68..b07f92342 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,5 +1,5 @@ -cmake_minimum_required(VERSION 3.17) -set_property(GLOBAL PROPERTY USE_FOLDERS ON) +cmake_minimum_required(VERSION 3.20) +#set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -16,20 +16,25 @@ if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +if (RTOS STREQUAL zephyr) + set(EXE_NAME app) +else() + set(EXE_NAME ${PROJECT}) + add_executable(${EXE_NAME}) +endif() # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${EXE_NAME} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${EXE_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${EXE_NAME} ${RTOS}) diff --git a/examples/device/cdc_msc/CMakePresets.json b/examples/device/cdc_msc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc/prj.conf b/examples/device/cdc_msc/prj.conf new file mode 100644 index 000000000..2f5139d9d --- /dev/null +++ b/examples/device/cdc_msc/prj.conf @@ -0,0 +1,6 @@ +CONFIG_GPIO=y +CONFIG_FPU=y +CONFIG_NO_OPTIMIZATIONS=y +CONFIG_UART_INTERRUPT_DRIVEN=y +CONFIG_NRFX_POWER=y +CONFIG_NRFX_UARTE0=y diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 4581a3bab..f36c910d7 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -51,7 +51,11 @@ int main(void) { board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index d2f8628f1..d325d77fa 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -190,7 +190,14 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if ( lba >= DISK_BLOCK_NUM ) { + return -1; + } + + // Check for overflow of offset + bufsize + if ( offset + bufsize > DISK_BLOCK_SIZE ) { + return -1; + } uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 2afa24903..4b6b88041 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -93,19 +93,7 @@ enum { #define EPNUM_MSC_OUT 0x05 #define EPNUM_MSC_IN 0x85 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_CDC_NOTIF 0x81 - #define EPNUM_CDC_OUT 0x02 - #define EPNUM_CDC_IN 0x83 - - #define EPNUM_MSC_OUT 0x04 - #define EPNUM_MSC_IN 0x85 - #elif CFG_TUSB_MCU == OPT_MCU_CXD56 - // CXD56 doesn't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) #define EPNUM_CDC_NOTIF 0x83 @@ -115,8 +103,8 @@ enum { #define EPNUM_MSC_OUT 0x05 #define EPNUM_MSC_IN 0x84 -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_NOTIF 0x81 #define EPNUM_CDC_OUT 0x02 diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index 33c7a1ec0..f7636a07a 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -19,7 +19,6 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c diff --git a/examples/device/cdc_msc_freertos/CMakePresets.json b/examples/device/cdc_msc_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index fe3fb6482..10cff57a0 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,46 +1,16 @@ +RTOS = freertos include ../../build_system/make/make.mk -FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) - INC += \ src \ - src/FreeRTOSConfig \ $(TOP)/hw \ - $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) \ # Example source EXAMPLE_SOURCE = \ - src/freertos_hook.c \ src/main.c \ src/msc_disk.c \ src/usb_descriptors.c SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# FreeRTOS source, all files in port folder -SRC_C += \ - $(FREERTOS_SRC)/list.c \ - $(FREERTOS_SRC)/queue.c \ - $(FREERTOS_SRC)/tasks.c \ - $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) - -SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) - -# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 -# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c -# CFLAGS += -Wno-error=sign-compare - -# Suppress FreeRTOSConfig.h warnings -CFLAGS_GCC += -Wno-error=redundant-decls - -# Suppress FreeRTOS source warnings -CFLAGS_GCC += -Wno-error=cast-qual - -# FreeRTOS (lto + Os) linker issue -LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext - include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 75a79aff4..b73a6d8dd 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -4,6 +4,7 @@ mcu:CH32V307 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 +mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx mcu:RP2040 diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index 869500ad2..000000000 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - -// Include MCU header -#include "bsp/board_mcu.h" - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" -#endif - -// TODO fix later -#if CFG_TUSB_MCU == OPT_MCU_MM32F327X - extern u32 SystemCoreClock; -#else - // FIXME cause redundant-decls warnings - extern uint32_t SystemCoreClock; -#endif - -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) -#define configRUN_FREERTOS_SECURE_ONLY 1 - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 0 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -#ifdef __RX__ -/* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 -#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 - -#else - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ -#if defined(__NVIC_PRIO_BITS) - // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h - #define configPRIO_BITS __NVIC_PRIO_BITS - -#elif defined(__ECLIC_INTCTLBITS) - // RISC-V Bumblebee core from nuclei - #define configPRIO_BITS __ECLIC_INTCTLBITS - -#elif defined(__IASMARM__) - // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. - // Therefore we will hard coded it to minimum value of 2 to get pass ci build. - // IAR user must update this to correct value of the target MCU - #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" - #define configPRIO_BITS 2 - -#else - #error "FreeRTOS configPRIO_BITS to be defined" -#endif - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) - -/* The highest interrupt priority that can be used by any interrupt service -routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL -INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER -PRIORITY THAN THIS! (higher priorities are lower numeric values. */ -#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 - -/* Interrupt priorities used by the kernel port layer itself. These are generic -to all Cortex-M ports, and do not rely on any particular library functions. */ -#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! -See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -#endif - -#endif /* __FREERTOS_CONFIG__H */ diff --git a/examples/device/cdc_msc_freertos/src/freertos_hook.c b/examples/device/cdc_msc_freertos/src/freertos_hook.c deleted file mode 100644 index 4920e3fae..000000000 --- a/examples/device/cdc_msc_freertos/src/freertos_hook.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#include "FreeRTOS.h" -#include "task.h" -#include "common/tusb_common.h" - - -void vApplicationMallocFailedHook(void) -{ - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) -{ - (void) pxTask; - (void) pcTaskName; - - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an - * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is - * used by the Idle task. */ -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) -{ - /* If the buffers to be provided to the Idle task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xIdleTaskTCB; - static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Idle task's - state will be stored. */ - *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; - - /* Pass out the array that will be used as the Idle task's stack. */ - *ppxIdleTaskStackBuffer = uxIdleTaskStack; - - /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configMINIMAL_STACK_SIZE is specified in words, not bytes. */ - *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; -} - -/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the - * application must provide an implementation of vApplicationGetTimerTaskMemory() - * to provide the memory that is used by the Timer service task. */ -void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) -{ - /* If the buffers to be provided to the Timer task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xTimerTaskTCB; - static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Timer - task's state will be stored. */ - *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; - - /* Pass out the array that will be used as the Timer task's stack. */ - *ppxTimerTaskStackBuffer = uxTimerTaskStack; - - /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ - *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; -} - -#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X -#include "iodefine.h" -void vApplicationSetupTimerInterrupt(void) -{ - /* Enable CMT0 */ - unsigned short oldPRCR = SYSTEM.PRCR.WORD; - SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR; - - CMT0.CMCNT = 0; - CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); - CMT0.CMCR.WORD = TU_BIT(6) | 2; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -} -#endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 607d40270..c51e8ea81 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,24 +30,9 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF - // ESP-IDF need "freertos/" prefix in include path. - // CFG_TUSB_OS_INC_PATH should be defined accordingly. - #include "freertos/FreeRTOS.h" - #include "freertos/semphr.h" - #include "freertos/queue.h" - #include "freertos/task.h" - #include "freertos/timers.h" - +#if TUSB_MCU_VENDOR_ESPRESSIF #define USBD_STACK_SIZE 4096 #else - - #include "FreeRTOS.h" - #include "semphr.h" - #include "queue.h" - #include "task.h" - #include "timers.h" - // Increase stack size when debug log is enabled #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif @@ -95,14 +80,10 @@ void cdc_task(void *params); int main(void) { board_init(); + // Create task for: tinyusb, blinky, cdc #if configSUPPORT_STATIC_ALLOCATION - // blinky task xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); - - // Create a task for tinyusb device stack xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); - - // Create CDC task xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, cdc_stack, &cdc_taskdef); #else xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); @@ -110,15 +91,15 @@ int main(void) { xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif +#if !TUSB_MCU_VENDOR_ESPRESSIF // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); } @@ -132,7 +113,11 @@ static void usb_device_task(void *param) { // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index d2f8628f1..d325d77fa 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -190,7 +190,14 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if ( lba >= DISK_BLOCK_NUM ) { + return -1; + } + + // Check for overflow of offset + bufsize + if ( offset + bufsize > DISK_BLOCK_SIZE ) { + return -1; + } uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index e743c9148..c3f2f7fb5 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 9c29701c7..405a57fe4 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -42,8 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ +tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -69,8 +68,7 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const *tud_descriptor_device_cb(void) { return (uint8_t const *) &desc_device; } @@ -78,8 +76,7 @@ uint8_t const * tud_descriptor_device_cb(void) // Configuration Descriptor //--------------------------------------------------------------------+ -enum -{ +enum { ITF_NUM_CDC = 0, ITF_NUM_CDC_DATA, ITF_NUM_MSC, @@ -96,8 +93,18 @@ enum #define EPNUM_MSC_OUT 0x05 #define EPNUM_MSC_IN 0x85 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG - // SAMG doesn't support a same endpoint number with different direction IN and OUT +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x81 + + #define EPNUM_MSC_OUT 0x05 + #define EPNUM_MSC_IN 0x84 + +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_NOTIF 0x81 #define EPNUM_CDC_OUT 0x02 diff --git a/examples/device/cdc_uac2/CMakeLists.txt b/examples/device/cdc_uac2/CMakeLists.txt index 64e4374e9..c8c797637 100644 --- a/examples/device/cdc_uac2/CMakeLists.txt +++ b/examples/device/cdc_uac2/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_uac2/CMakePresets.json b/examples/device/cdc_uac2/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_uac2/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index 25b2cd9a5..b148593da 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -46,7 +46,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); #if (CFG_TUSB_MCU == OPT_MCU_RP2040) stdio_init_all(); diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index 72a695622..9f7255d8a 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -97,18 +97,8 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_CDC_OUT 0x02 #define EPNUM_CDC_IN 0x82 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_AUDIO_IN 0x01 - #define EPNUM_AUDIO_OUT 0x02 - - #define EPNUM_CDC_NOTIF 0x83 - #define EPNUM_CDC_OUT 0x04 - #define EPNUM_CDC_IN 0x85 - -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_AUDIO_IN 0x01 #define EPNUM_AUDIO_OUT 0x02 diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/dfu/CMakePresets.json b/examples/device/dfu/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dfu/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 81fc0a62c..af9e99857 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -75,7 +75,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/dfu_runtime/CMakePresets.json b/examples/device/dfu_runtime/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dfu_runtime/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 170dde932..4740c18c4 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -70,7 +70,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index 2b20d2234..8a62d6ba2 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/dynamic_configuration/CMakePresets.json b/examples/device/dynamic_configuration/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dynamic_configuration/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index b6409c8e1..32ff58232 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -57,7 +57,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 7f35b4b22..0a2049288 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -132,21 +132,8 @@ enum #define EPNUM_1_MSC_OUT 0x02 #define EPNUM_1_MSC_IN 0x82 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG - // SAMG doesn't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_0_CDC_NOTIF 0x81 - #define EPNUM_0_CDC_OUT 0x02 - #define EPNUM_0_CDC_IN 0x83 - - #define EPNUM_0_MIDI_OUT 0x04 - #define EPNUM_0_MIDI_IN 0x85 - - #define EPNUM_1_MSC_OUT 0x01 - #define EPNUM_1_MSC_IN 0x82 - -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_0_CDC_NOTIF 0x81 #define EPNUM_0_CDC_OUT 0x02 diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_boot_interface/CMakePresets.json b/examples/device/hid_boot_interface/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_boot_interface/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 7ad5c53c2..570e4e801 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -57,7 +57,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -161,8 +165,8 @@ void hid_task(void) { uint8_t const report_id = 0; uint8_t const button_mask = 0; - uint8_t const vertical = 0; - uint8_t const horizontal = 0; + int8_t const vertical = 0; + int8_t const horizontal = 0; int8_t const delta = 5; tud_hid_n_mouse_report(ITF_NUM_MOUSE, report_id, button_mask, delta, delta, vertical, horizontal); diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_composite/CMakePresets.json b/examples/device/hid_composite/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index dcf13079f..a58107b6f 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -58,7 +58,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -193,11 +197,43 @@ static void send_hid_report(uint8_t report_id, uint32_t btn) } } break; - default: break; } } +/* use this to send stylus touch signal through USB. */ +static void send_stylus_touch(uint16_t x, uint16_t y, bool state) +{ + // skip if hid is not ready yet + if ( !tud_hid_ready() ) return; + + static bool has_stylus_pen = false; + + hid_stylus_report_t report = + { + .attr = 0, + .x = 0, + .y = 0 + }; + + report.x = x; + report.y = y; + + if (state) + { + report.attr = STYLUS_ATTR_TIP_SWITCH | STYLUS_ATTR_IN_RANGE; + tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + + has_stylus_pen = true; + }else + { + report.attr = 0; + if (has_stylus_pen) tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + has_stylus_pen = false; + } + +} + // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) // tud_hid_report_complete_cb() is used to send the next report after previous one is complete void hid_task(void) @@ -205,6 +241,14 @@ void hid_task(void) // Poll every 10ms const uint32_t interval_ms = 10; static uint32_t start_ms = 0; + static uint32_t touch_ms = 0; + static bool touch_state = false; + + if (board_millis() - touch_ms < 100) { + touch_ms = board_millis(); + send_stylus_touch(0, 0, touch_state = !touch_state); + return; + } if ( board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index e174db46d..15c6e1f73 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -79,6 +79,7 @@ uint8_t const desc_hid_report[] = { TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD )), TUD_HID_REPORT_DESC_MOUSE ( HID_REPORT_ID(REPORT_ID_MOUSE )), + TUD_HID_REPORT_DESC_STYLUS_PEN( HID_REPORT_ID(REPORT_ID_STYLUS_PEN )), TUD_HID_REPORT_DESC_CONSUMER( HID_REPORT_ID(REPORT_ID_CONSUMER_CONTROL )), TUD_HID_REPORT_DESC_GAMEPAD ( HID_REPORT_ID(REPORT_ID_GAMEPAD )) }; diff --git a/examples/device/hid_composite/src/usb_descriptors.h b/examples/device/hid_composite/src/usb_descriptors.h index e733d31dd..18d31172b 100644 --- a/examples/device/hid_composite/src/usb_descriptors.h +++ b/examples/device/hid_composite/src/usb_descriptors.h @@ -29,6 +29,7 @@ enum { REPORT_ID_KEYBOARD = 1, REPORT_ID_MOUSE, + REPORT_ID_STYLUS_PEN, REPORT_ID_CONSUMER_CONTROL, REPORT_ID_GAMEPAD, REPORT_ID_COUNT diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index eb22014fb..6ce9e72fe 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -19,7 +19,6 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) diff --git a/examples/device/hid_composite_freertos/CMakePresets.json b/examples/device/hid_composite_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index 88d602393..bd625b345 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -1,47 +1,15 @@ -DEPS_SUBMODULES += lib/FreeRTOS-Kernel - +RTOS = freertos include ../../build_system/make/make.mk -FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) - INC += \ src \ - src/FreeRTOSConfig \ $(TOP)/hw \ - $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) # Example source EXAMPLE_SOURCE = \ - src/freertos_hook.c \ src/main.c \ src/usb_descriptors.c SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# FreeRTOS source, all files in port folder -SRC_C += \ - $(FREERTOS_SRC)/list.c \ - $(FREERTOS_SRC)/queue.c \ - $(FREERTOS_SRC)/tasks.c \ - $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) - -SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) - -# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 -# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c -# CFLAGS += -Wno-error=sign-compare - -# Suppress FreeRTOSConfig.h warnings -CFLAGS_GCC += -Wno-error=redundant-decls - -# Suppress FreeRTOS source warnings -CFLAGS_GCC += -Wno-error=cast-qual - -# FreeRTOS (lto + Os) linker issue -LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext - include ../../build_system/make/rules.mk diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index c13667f56..650bf355b 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -4,6 +4,7 @@ mcu:CH32V307 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 +mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx mcu:RP2040 diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index 869500ad2..000000000 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - -// Include MCU header -#include "bsp/board_mcu.h" - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" -#endif - -// TODO fix later -#if CFG_TUSB_MCU == OPT_MCU_MM32F327X - extern u32 SystemCoreClock; -#else - // FIXME cause redundant-decls warnings - extern uint32_t SystemCoreClock; -#endif - -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) -#define configRUN_FREERTOS_SECURE_ONLY 1 - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 0 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -#ifdef __RX__ -/* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 -#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 - -#else - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ -#if defined(__NVIC_PRIO_BITS) - // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h - #define configPRIO_BITS __NVIC_PRIO_BITS - -#elif defined(__ECLIC_INTCTLBITS) - // RISC-V Bumblebee core from nuclei - #define configPRIO_BITS __ECLIC_INTCTLBITS - -#elif defined(__IASMARM__) - // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. - // Therefore we will hard coded it to minimum value of 2 to get pass ci build. - // IAR user must update this to correct value of the target MCU - #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" - #define configPRIO_BITS 2 - -#else - #error "FreeRTOS configPRIO_BITS to be defined" -#endif - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) - -/* The highest interrupt priority that can be used by any interrupt service -routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL -INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER -PRIORITY THAN THIS! (higher priorities are lower numeric values. */ -#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 - -/* Interrupt priorities used by the kernel port layer itself. These are generic -to all Cortex-M ports, and do not rely on any particular library functions. */ -#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! -See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -#endif - -#endif /* __FREERTOS_CONFIG__H */ diff --git a/examples/device/hid_composite_freertos/src/freertos_hook.c b/examples/device/hid_composite_freertos/src/freertos_hook.c deleted file mode 100644 index 4920e3fae..000000000 --- a/examples/device/hid_composite_freertos/src/freertos_hook.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#include "FreeRTOS.h" -#include "task.h" -#include "common/tusb_common.h" - - -void vApplicationMallocFailedHook(void) -{ - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) -{ - (void) pxTask; - (void) pcTaskName; - - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false, ); -} - -/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an - * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is - * used by the Idle task. */ -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) -{ - /* If the buffers to be provided to the Idle task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xIdleTaskTCB; - static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Idle task's - state will be stored. */ - *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; - - /* Pass out the array that will be used as the Idle task's stack. */ - *ppxIdleTaskStackBuffer = uxIdleTaskStack; - - /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configMINIMAL_STACK_SIZE is specified in words, not bytes. */ - *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; -} - -/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the - * application must provide an implementation of vApplicationGetTimerTaskMemory() - * to provide the memory that is used by the Timer service task. */ -void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) -{ - /* If the buffers to be provided to the Timer task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xTimerTaskTCB; - static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ]; - - /* Pass out a pointer to the StaticTask_t structure in which the Timer - task's state will be stored. */ - *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; - - /* Pass out the array that will be used as the Timer task's stack. */ - *ppxTimerTaskStackBuffer = uxTimerTaskStack; - - /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ - *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; -} - -#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X -#include "iodefine.h" -void vApplicationSetupTimerInterrupt(void) -{ - /* Enable CMT0 */ - unsigned short oldPRCR = SYSTEM.PRCR.WORD; - SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR; - - CMT0.CMCNT = 0; - CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); - CMT0.CMCR.WORD = TU_BIT(6) | 2; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -} -#endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 2bd545bc2..30c0331ef 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -113,14 +113,14 @@ int main(void) xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUP_MCU_ESPRESSIF +#if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); @@ -136,7 +136,11 @@ void usb_device_task(void* param) // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 0689e0f23..6ec38b95c 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_generic_inout/CMakePresets.json b/examples/device/hid_generic_inout/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_generic_inout/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_generic_inout/hid_test.py b/examples/device/hid_generic_inout/hid_test.py index 5bdba9db0..3aaca9d2c 100644..100755 --- a/examples/device/hid_generic_inout/hid_test.py +++ b/examples/device/hid_generic_inout/hid_test.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 # Install python3 HID package https://pypi.org/project/hid/ import hid diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index cfa9f6283..73f51002d 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -81,7 +81,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_multiple_interface/CMakePresets.json b/examples/device/hid_multiple_interface/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_multiple_interface/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 30b4ae055..92c7e8332 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -62,7 +62,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index e51f14c02..6a7e68c3d 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -9,22 +9,24 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() add_executable(${PROJECT}) + # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/device/midi_test/CMakePresets.json b/examples/device/midi_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index b1d51598f..e5c47bdb2 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -58,19 +58,21 @@ void led_blinking_task(void); void midi_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); } - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); midi_task(); @@ -82,29 +84,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ +void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -116,8 +114,7 @@ void tud_resume_cb(void) uint32_t note_pos = 0; // Store example melody as an array of note values -uint8_t note_sequence[] = -{ +const uint8_t note_sequence[] = { 74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78, 74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61, 56,61,64,68,74,78,81,86,90,93,98,102 @@ -133,11 +130,15 @@ void midi_task(void) // The MIDI interface always creates input and output port/jack descriptors // regardless of these being used or not. Therefore incoming traffic should be read // (possibly just discarded) to avoid the sender blocking in IO - uint8_t packet[4]; - while ( tud_midi_available() ) tud_midi_packet_read(packet); + while (tud_midi_available()) { + uint8_t packet[4]; + tud_midi_packet_read(packet); + } // send note periodically - if (board_millis() - start_ms < 286) return; // not enough time + if (board_millis() - start_ms < 286) { + return; // not enough time + } start_ms += 286; // Previous positions in the note sequence. @@ -145,7 +146,9 @@ void midi_task(void) // If we currently are at position 0, set the // previous position to the last note in the sequence. - if (previous < 0) previous = sizeof(note_sequence) - 1; + if (previous < 0) { + previous = sizeof(note_sequence) - 1; + } // Send Note On for current position at full velocity (127) on channel 1. uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 }; @@ -159,7 +162,9 @@ void midi_task(void) note_pos++; // If we are at the end of the sequence, start over. - if (note_pos >= sizeof(note_sequence)) note_pos = 0; + if (note_pos >= sizeof(note_sequence)) { + note_pos = 0; + } } //--------------------------------------------------------------------+ diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 9781d3d6f..384742ae8 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -39,8 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ +tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -62,18 +61,13 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const * tud_descriptor_device_cb(void) { return (uint8_t const *) &desc_device; } - - //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ - -enum -{ +enum { ITF_NUM_MIDI = 0, ITF_NUM_MIDI_STREAMING, ITF_NUM_TOTAL @@ -84,19 +78,27 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_MIDI_OUT 0x02 - #define EPNUM_MIDI_IN 0x02 -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // On Bridgetek FT9xx endpoint numbers must be unique... - #define EPNUM_MIDI_OUT 0x02 - #define EPNUM_MIDI_IN 0x03 + #define EPNUM_MIDI_OUT 0x02 + #define EPNUM_MIDI_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_MIDI_OUT 0x02 + #define EPNUM_MIDI_IN 0x81 + +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_MIDI_OUT 0x01 + #define EPNUM_MIDI_IN 0x82 + #else - #define EPNUM_MIDI_OUT 0x01 - #define EPNUM_MIDI_IN 0x01 + #define EPNUM_MIDI_OUT 0x01 + #define EPNUM_MIDI_IN 0x81 #endif -uint8_t const desc_fs_configuration[] = -{ +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -105,8 +107,7 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = -{ +uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -118,8 +119,7 @@ uint8_t const desc_hs_configuration[] = // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations #if TUD_OPT_HIGH_SPEED @@ -143,8 +143,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = -{ +char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product @@ -173,14 +172,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); - size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if ( chr_count > max_count ) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/midi_test_freertos/CMakeLists.txt b/examples/device/midi_test_freertos/CMakeLists.txt new file mode 100644 index 000000000..6ce9e72fe --- /dev/null +++ b/examples/device/midi_test_freertos/CMakeLists.txt @@ -0,0 +1,33 @@ +cmake_minimum_required(VERSION 3.20) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT} C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example with FreeRTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} freertos) diff --git a/examples/device/midi_test_freertos/CMakePresets.json b/examples/device/midi_test_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test_freertos/Makefile b/examples/device/midi_test_freertos/Makefile new file mode 100644 index 000000000..26cd83486 --- /dev/null +++ b/examples/device/midi_test_freertos/Makefile @@ -0,0 +1,15 @@ +RTOS = freertos +include ../../build_system/make/make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/main.c \ + src/usb_descriptors.c \ + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../build_system/make/rules.mk diff --git a/examples/device/midi_test_freertos/skip.txt b/examples/device/midi_test_freertos/skip.txt new file mode 100644 index 000000000..650bf355b --- /dev/null +++ b/examples/device/midi_test_freertos/skip.txt @@ -0,0 +1,16 @@ +mcu:CH32V103 +mcu:CH32V20X +mcu:CH32V307 +mcu:CXD56 +mcu:F1C100S +mcu:GD32VF103 +mcu:MCXA15 +mcu:MKL25ZXX +mcu:MSP430x5xx +mcu:RP2040 +mcu:SAMD11 +mcu:SAMX7X +mcu:VALENTYUSB_EPTRI +mcu:RAXXX +family:broadcom_32bit +family:broadcom_64bit diff --git a/examples/device/midi_test_freertos/src/CMakeLists.txt b/examples/device/midi_test_freertos/src/CMakeLists.txt new file mode 100644 index 000000000..9bd427c89 --- /dev/null +++ b/examples/device/midi_test_freertos/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS main.c usb_descriptors.c + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c new file mode 100644 index 000000000..dbe89080c --- /dev/null +++ b/examples/device/midi_test_freertos/src/main.c @@ -0,0 +1,239 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include "bsp/board_api.h" +#include "tusb.h" + +/* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install + * synth software and midi connection management software. On + * - Linux (Ubuntu): install qsynth, qjackctl. Then connect TinyUSB output port to FLUID Synth input port + * - Windows: install MIDI-OX + * - MacOS: SimpleSynth + */ + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +#if TUSB_MCU_VENDOR_ESPRESSIF + #define USBD_STACK_SIZE 4096 +#else + // Increase stack size when debug log is enabled + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + +#define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE +#define MIDI_STACK_SIZE configMINIMAL_STACK_SIZE + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t blinky_stack[BLINKY_STACK_SIZE]; +StaticTask_t blinky_taskdef; + +StackType_t usb_device_stack[USBD_STACK_SIZE]; +StaticTask_t usb_device_taskdef; + +StackType_t midi_stack[MIDI_STACK_SIZE]; +StaticTask_t midi_taskdef; +#endif + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void usb_device_task(void *param); +void led_blinking_task(void* param); +void midi_task(void* param); + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ +int main(void) { + board_init(); + +#if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); + xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + xTaskCreateStatic(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, midi_stack, &midi_taskdef); +#else + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); +#endif + +#if !TUSB_MCU_VENDOR_ESPRESSIF + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 + vTaskStartScheduler(); +#endif + + return 0; +} + +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { + main(); +} +#endif + +// USB Device Driver task +// This top level thread process all usb events and invoke callbacks +void usb_device_task(void *param) { + (void) param; + + // init device stack on configured roothub port + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + + // RTOS forever loop + while (1) { + // put this thread to waiting state until there is new events + tud_task(); + } +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) { + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) { + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) { + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) { + blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; +} + +//--------------------------------------------------------------------+ +// MIDI Task +//--------------------------------------------------------------------+ + +// Store example melody as an array of note values +const uint8_t note_sequence[] = { + 74,78,81,86,90,93,98,102,57,61,66,69,73,78,81,85,88,92,97,100,97,92,88,85,81,78, + 74,69,66,62,57,62,66,69,74,78,81,86,90,93,97,102,97,93,90,85,81,78,73,68,64,61, + 56,61,64,68,74,78,81,86,90,93,98,102 +}; + +void midi_task(void* param) { + (void) param; + + const uint8_t cable_num = 0; // MIDI jack associated with USB endpoint + const uint8_t channel = 0; // 0 for channel 1 + + // Variable that holds the current position in the sequence. + uint32_t note_pos = 0; + + while (1) { + // send note periodically + vTaskDelay(286 / portTICK_PERIOD_MS); + + // Previous positions in the note sequence. + int previous = (int) (note_pos - 1); + + // If we currently are at position 0, set the + // previous position to the last note in the sequence. + if (previous < 0) { + previous = sizeof(note_sequence) - 1; + } + + // Send Note On for current position at full velocity (127) on channel 1. + uint8_t note_on[3] = { 0x90 | channel, note_sequence[note_pos], 127 }; + tud_midi_stream_write(cable_num, note_on, 3); + + // Send Note Off for previous note. + uint8_t note_off[3] = { 0x80 | channel, note_sequence[previous], 0}; + tud_midi_stream_write(cable_num, note_off, 3); + + // Increment position + note_pos++; + + // If we are at the end of the sequence, start over. + if (note_pos >= sizeof(note_sequence)) { + note_pos = 0; + } + + // The MIDI interface always creates input and output port/jack descriptors + // regardless of these being used or not. Therefore incoming traffic should be read + // (possibly just discarded) to avoid the sender blocking in IO + while (tud_midi_available()) { + uint8_t packet[4]; + tud_midi_packet_read(packet); + } + } +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void* param) { + (void) param; + static uint32_t start_ms = 0; + static bool led_state = false; + + while (1) { + // Blink every interval ms + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} diff --git a/examples/device/midi_test_freertos/src/tusb_config.h b/examples/device/midi_test_freertos/src/tusb_config.h new file mode 100644 index 000000000..0ffdc37fb --- /dev/null +++ b/examples/device/midi_test_freertos/src/tusb_config.h @@ -0,0 +1,108 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_FREERTOS +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 1 +#define CFG_TUD_VENDOR 0 + +// MIDI FIFO size of TX and RX +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/device/midi_test_freertos/src/usb_descriptors.c b/examples/device/midi_test_freertos/src/usb_descriptors.c new file mode 100644 index 000000000..384742ae8 --- /dev/null +++ b/examples/device/midi_test_freertos/src/usb_descriptors.c @@ -0,0 +1,199 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) { + return (uint8_t const *) &desc_device; +} +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum { + ITF_NUM_MIDI = 0, + ITF_NUM_MIDI_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MIDI_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_MIDI_OUT 0x02 + #define EPNUM_MIDI_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_MIDI_OUT 0x02 + #define EPNUM_MIDI_IN 0x81 + +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_MIDI_OUT 0x01 + #define EPNUM_MIDI_IN 0x82 + +#else + #define EPNUM_MIDI_OUT 0x01 + #define EPNUM_MIDI_IN 0x81 +#endif + +uint8_t const desc_fs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI_OUT, (0x80 | EPNUM_MIDI_IN), 64) +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI_OUT, (0x80 | EPNUM_MIDI_IN), 512) +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// String Descriptor Index +enum { + STRID_LANGID = 0, + STRID_MANUFACTURER, + STRID_PRODUCT, + STRID_SERIAL, +}; + +// array of pointer to string descriptors +char const *string_desc_arr[] = { + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible +}; + +static uint16_t _desc_str[32 + 1]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void) langid; + size_t chr_count; + + switch ( index ) { + case STRID_LANGID: + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + break; + + case STRID_SERIAL: + chr_count = board_usb_get_serial(_desc_str + 1, 32); + break; + + default: + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } + + const char *str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if ( chr_count > max_count ) { + chr_count = max_count; + } + + // Convert ASCII string into UTF-16 + for ( size_t i = 0; i < chr_count; i++ ) { + _desc_str[1 + i] = str[i]; + } + break; + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + + return _desc_str; +} diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index e69fead35..3955bfb49 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -15,20 +15,25 @@ if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +if (RTOS STREQUAL zephyr) + set(EXE_NAME app) +else() + set(EXE_NAME ${PROJECT}) + add_executable(${EXE_NAME}) +endif() # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${EXE_NAME} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${EXE_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${EXE_NAME} ${RTOS}) diff --git a/examples/device/msc_dual_lun/CMakePresets.json b/examples/device/msc_dual_lun/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/msc_dual_lun/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/msc_dual_lun/prj.conf b/examples/device/msc_dual_lun/prj.conf new file mode 100644 index 000000000..2f5139d9d --- /dev/null +++ b/examples/device/msc_dual_lun/prj.conf @@ -0,0 +1,6 @@ +CONFIG_GPIO=y +CONFIG_FPU=y +CONFIG_NO_OPTIMIZATIONS=y +CONFIG_UART_INTERRUPT_DRIVEN=y +CONFIG_NRFX_POWER=y +CONFIG_NRFX_UARTE0=y diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index aabd0bf8a..012095dca 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -54,7 +54,11 @@ int main(void) { board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index c0610945f..efb9a966d 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -85,17 +85,17 @@ enum #define EPNUM_MSC_OUT 0x02 #define EPNUM_MSC_IN 0x82 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG - // SAMG doesn't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_MSC_OUT 0x01 - #define EPNUM_MSC_IN 0x82 +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_MSC_OUT 0x02 + #define EPNUM_MSC_IN 0x81 -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_MSC_OUT 0x01 - #define EPNUM_MSC_IN 0x82 + #define EPNUM_MSC_OUT 0x01 + #define EPNUM_MSC_IN 0x82 #else #define EPNUM_MSC_OUT 0x01 diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 13923b583..87b92f4dc 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_LIST_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/net_lwip_webserver/CMakePresets.json b/examples/device/net_lwip_webserver/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/net_lwip_webserver/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 85c450e82..5ebe71612 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -3,6 +3,7 @@ mcu:CH32V20X mcu:LPC11UXX mcu:LPC13XX mcu:LPC15XX +mcu:MCXA15 mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 791e09b4f..36f402332 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -194,8 +194,13 @@ uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) { static void service_traffic(void) { /* handle any packet received by tud_network_recv_cb() */ if (received_frame) { - ethernet_input(received_frame, &netif_data); - pbuf_free(received_frame); + // Surrender ownership of our pbuf unless there was an error + // Only call pbuf_free if not Ok else it will panic with "pbuf_free: p->ref > 0" + // or steal it from whatever took ownership of it with undefined consequences. + // See: https://savannah.nongnu.org/patch/index.php?10121 + if (ethernet_input(received_frame, &netif_data)!=ERR_OK) { + pbuf_free(received_frame); + } received_frame = NULL; tud_network_recv_renew(); } @@ -216,7 +221,11 @@ int main(void) { board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index d3e094517..22082fc81 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -91,6 +91,8 @@ extern "C" { #define USE_ECM 1 #elif TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F1) #define USE_ECM 1 +#elif TU_CHECK_MCU(OPT_MCU_MAX32690, OPT_MCU_MAX32650, OPT_MCU_MAX32666, OPT_MCU_MAX78002) + #define USE_ECM 1 #else #define USE_ECM 0 #define INCLUDE_IPERF diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index da628c8be..cd800f521 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -72,8 +72,11 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, +#if CFG_TUD_NCM + .bcdUSB = 0x0201, +#else .bcdUSB = 0x0200, - +#endif // Use Interface Association Descriptor (IAD) device class .bDeviceClass = TUSB_CLASS_MISC, .bDeviceSubClass = MISC_SUBCLASS_COMMON, @@ -113,8 +116,15 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_NET_OUT 0x02 #define EPNUM_NET_IN 0x82 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_NET_NOTIF 0x83 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x81 + +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_NET_NOTIF 0x81 #define EPNUM_NET_OUT 0x02 @@ -181,6 +191,110 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL; } +#if CFG_TUD_NCM +//--------------------------------------------------------------------+ +// BOS Descriptor +//--------------------------------------------------------------------+ + +/* Used to automatically load the NCM driver on Windows 10, otherwise manual driver install is needed. + Associate NCM interface with WINNCM driver. */ + +/* Microsoft OS 2.0 registry property descriptor +Per MS requirements https://msdn.microsoft.com/en-us/library/windows/hardware/hh450799(v=vs.85).aspx +device should create DeviceInterfaceGUIDs. It can be done by driver and +in case of real PnP solution device should expose MS "Microsoft OS 2.0 +registry property descriptor". Such descriptor can insert any record +into Windows registry per device/configuration/interface. In our case it +will insert "DeviceInterfaceGUIDs" multistring property. + +GUID is freshly generated and should be OK to use. + +https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ +(Section Microsoft OS compatibility descriptors) +*/ + +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) + +#define MS_OS_20_DESC_LEN 0xB2 + +// BOS Descriptor is required for webUSB +uint8_t const desc_bos[] = +{ + // total length, number of device caps + TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), + + // Microsoft OS 2.0 descriptor + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1) +}; + +uint8_t const * tud_descriptor_bos_cb(void) +{ + return desc_bos; +} + +uint8_t const desc_ms_os_20[] = +{ + // Set header: length, type, windows version, total length + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + + // Configuration subset header: length, type, configuration index, reserved, configuration total length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + + // Function Subset header: length, type, first interface, reserved, subset length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + + // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + + // MS OS 2.0 Registry property descriptor: length, type + U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, + 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(0x0050), // wPropertyDataLength + //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} + '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, + '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, + '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, + '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); + +// Invoked when a control transfer occurred on an interface of this class +// Driver response accordingly to the request and the transfer stage (setup/data/ack) +// return false to stall control endpoint (e.g unsupported request) +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { + // nothing to with DATA & ACK stage + if (stage != CONTROL_STAGE_SETUP) return true; + + switch (request->bmRequestType_bit.type) { + case TUSB_REQ_TYPE_VENDOR: + switch (request->bRequest) { + case 1: + if (request->wIndex == 7) { + // Get Microsoft OS 2.0 compatible descriptor + uint16_t total_len; + memcpy(&total_len, desc_ms_os_20 + 8, 2); + + return tud_control_xfer(rhport, request, (void*)(uintptr_t)desc_ms_os_20, total_len); + } else { + return false; + } + + default: break; + } + break; + + default: break; + } + + // stall unknown request + return false; +} + +#endif //--------------------------------------------------------------------+ // String Descriptors //--------------------------------------------------------------------+ diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index e92a57148..ced98a909 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/uac2_headset/CMakePresets.json b/examples/device/uac2_headset/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/uac2_headset/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index c285211b8..6b2ab0973 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -100,7 +100,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 328e35f52..c921a37ae 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -146,7 +146,7 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN)*2 +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN)*4 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index ff4dc2acc..bc9160d5e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -84,21 +84,21 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_AUDIO_OUT 0x03 #define EPNUM_AUDIO_INT 0x01 +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + // #define EPNUM_AUDIO_IN 0x01 + // #define EPNUM_AUDIO_OUT 0x02 + // #define EPNUM_AUDIO_INT 0x03 + #elif CFG_TUSB_MCU == OPT_MCU_NRF5X // ISO endpoints for NRF5x are fixed to 0x08 (0x88) #define EPNUM_AUDIO_IN 0x08 #define EPNUM_AUDIO_OUT 0x08 #define EPNUM_AUDIO_INT 0x01 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_AUDIO_IN 0x01 - #define EPNUM_AUDIO_OUT 0x02 - #define EPNUM_AUDIO_INT 0x03 - -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_AUDIO_IN 0x01 #define EPNUM_AUDIO_OUT 0x02 diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt index e92a57148..0ed3db646 100644 --- a/examples/device/uac2_speaker_fb/CMakeLists.txt +++ b/examples/device/uac2_speaker_fb/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -21,6 +21,7 @@ add_executable(${PROJECT}) target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/quirk_os_guessing.c ) # Example include diff --git a/examples/device/uac2_speaker_fb/CMakePresets.json b/examples/device/uac2_speaker_fb/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/uac2_speaker_fb/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/uac2_speaker_fb/src/audio_debug.py b/examples/device/uac2_speaker_fb/src/audio_debug.py index 336c46c01..05b49baf6 100644..100755 --- a/examples/device/uac2_speaker_fb/src/audio_debug.py +++ b/examples/device/uac2_speaker_fb/src/audio_debug.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 # Install python3 HID package https://pypi.org/project/hid/ # Install python3 matplotlib package https://pypi.org/project/matplotlib/ diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 0a8529a61..ea5a2941d 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -106,7 +106,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -414,7 +418,7 @@ void audio_task(void) if ( start_ms == curr_ms ) return; // not enough time start_ms = curr_ms; - uint16_t length = current_sample_rate/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX; + uint16_t length = (uint16_t) (current_sample_rate/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX); if (current_sample_rate == 44100 && (curr_ms % 10 == 0)) { @@ -465,7 +469,7 @@ void audio_debug_task(void) debug_info.alt_settings = current_alt_settings; debug_info.fifo_size = CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ; debug_info.fifo_count = fifo_count; - debug_info.fifo_count_avg = fifo_count_avg >> 16; + debug_info.fifo_count_avg = (uint16_t) (fifo_count_avg >> 16); for (int i = 0; i < CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1; i++) { debug_info.mute[i] = mute[i]; diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index 31c5e116d..ee1b92225 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -131,15 +131,8 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) #define EPNUM_AUDIO_OUT 0x08 #define EPNUM_DEBUG 0x01 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_AUDIO_FB 0x01 - #define EPNUM_AUDIO_OUT 0x02 - #define EPNUM_DEBUG 0x03 - -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_AUDIO_FB 0x01 #define EPNUM_AUDIO_OUT 0x02 diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index a63ca2d81..d2deb72d5 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/usbtmc/CMakePresets.json b/examples/device/usbtmc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/usbtmc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 9d8f0783d..aa7902a15 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -55,7 +55,11 @@ int main(void) board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 54948291e..85acd990a 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -38,7 +38,7 @@ #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) -#define USB_VID 0xCafe +#define USB_VID 0xcafe #define USB_BCD 0x0200 //--------------------------------------------------------------------+ @@ -48,8 +48,8 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = 0x00, + .bcdUSB = USB_BCD, + .bDeviceClass = TUSB_CLASS_UNSPECIFIED, .bDeviceSubClass = 0x00, .bDeviceProtocol = 0x00, @@ -57,7 +57,7 @@ tusb_desc_device_t const desc_device = .idVendor = USB_VID, .idProduct = USB_PID, - .bcdDevice = USB_BCD, + .bcdDevice = 0x0100, .iManufacturer = 0x01, .iProduct = 0x02, @@ -112,17 +112,6 @@ enum #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_USBTMC_DESC_LEN) -#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - // Note: since CDC EP ( 1 & 2), HID (4) are spot-on, thus we only need to force - // endpoint number for MSC to 5 - #define EPNUM_MSC 0x05 -#else - #define EPNUM_MSC 0x03 -#endif - - uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA @@ -151,7 +140,7 @@ tusb_desc_device_qualifier_t const desc_device_qualifier = .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, - .bDeviceClass = 0x00, + .bDeviceClass = TUSB_CLASS_UNSPECIFIED, .bDeviceSubClass = 0x00, .bDeviceProtocol = 0x00, diff --git a/examples/device/usbtmc/visaQuery.py b/examples/device/usbtmc/visaQuery.py index ca65daf97..ca65daf97 100644..100755 --- a/examples/device/usbtmc/visaQuery.py +++ b/examples/device/usbtmc/visaQuery.py diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index 80dc39ca5..90788fa60 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/video_capture/CMakePresets.json b/examples/device/video_capture/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index cb0c7d2e6..50302c544 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,5 +1,6 @@ mcu:CH32V103 mcu:CH32V20X +mcu:MCXA15 mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index ddb51e03a..04d4af4e5 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -68,7 +68,11 @@ int main(void) { freertos_init_task(); #else // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -181,7 +185,7 @@ static void fill_color_bar(uint8_t* buffer, unsigned start_position) { #endif -void video_send_frame(void) { +static void video_send_frame(void) { static unsigned start_ms = 0; static unsigned already_sent = 0; @@ -288,7 +292,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -319,7 +323,11 @@ void usb_device_task(void *param) { // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -344,7 +352,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUP_MCU_ESPRESSIF + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 21483a2da..6dbd6f2a5 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif @@ -106,7 +106,7 @@ #define CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE 256 // use bulk endpoint for streaming interface -#define CFG_TUD_VIDEO_STREAMING_BULK 1 + #define CFG_TUD_VIDEO_STREAMING_BULK 0 //#define CFG_EXAMPLE_VIDEO_READONLY //#define CFG_EXAMPLE_VIDEO_DISABLE_MJPEG diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 5011bee18..b3e19b0f0 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -118,6 +118,8 @@ enum { #elif TU_CHECK_MCU(OPT_MCU_NRF5X) // nRF5x ISO can only be endpoint 8 #define EPNUM_VIDEO_IN (CFG_TUD_VIDEO_STREAMING_BULK ? 0x81 : 0x88) +#elif TU_CHECK_MCU(OPT_MCU_MAX32650, OPT_MCU_MAX32666, OPT_MCU_MAX32690, OPT_MCU_MAX78002) + #define EPNUM_VIDEO_IN 0x81 #else #define EPNUM_VIDEO_IN 0x81 #endif diff --git a/examples/device/video_capture_2ch/CMakeLists.txt b/examples/device/video_capture_2ch/CMakeLists.txt index 80dc39ca5..90788fa60 100644 --- a/examples/device/video_capture_2ch/CMakeLists.txt +++ b/examples/device/video_capture_2ch/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/video_capture_2ch/CMakePresets.json b/examples/device/video_capture_2ch/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture_2ch/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index af3b0de04..0f6508226 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -6,6 +6,7 @@ mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 mcu:STM32L0 +mcu:MCXA15 family:espressif board:curiosity_nano board:kuiic diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index e8c2ec6b0..245e7abb8 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -68,7 +68,11 @@ int main(void) { freertos_init_task(); #else // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -296,7 +300,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -327,7 +331,11 @@ void usb_device_task(void *param) { // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -352,7 +360,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUP_MCU_ESPRESSIF + #if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index 43c7dfc90..91775a327 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index e92a57148..ced98a909 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/webusb_serial/CMakePresets.json b/examples/device/webusb_serial/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/webusb_serial/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 800d435b8..d189af91f 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -73,8 +73,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; #define URL "example.tinyusb.org/webusb-serial/index.html" -const tusb_desc_webusb_url_t desc_url = -{ +const tusb_desc_webusb_url_t desc_url = { .bLength = 3 + sizeof(URL) - 1, .bDescriptorType = 3, // WEBUSB URL type .bScheme = 1, // 0: http, 1: https @@ -86,47 +85,44 @@ static bool web_serial_connected = false; //------------- prototypes -------------// void led_blinking_task(void); void cdc_task(void); -void webserial_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); } - while (1) - { + while (1) { tud_task(); // tinyusb device task cdc_task(); - webserial_task(); led_blinking_task(); } } // send characters to both CDC and WebUSB -void echo_all(uint8_t buf[], uint32_t count) -{ +void echo_all(const uint8_t buf[], uint32_t count) { // echo to web serial - if ( web_serial_connected ) - { + if (web_serial_connected) { tud_vendor_write(buf, count); tud_vendor_write_flush(); } // echo to cdc - if ( tud_cdc_connected() ) - { - for(uint32_t i=0; i<count; i++) - { + if (tud_cdc_connected()) { + for (uint32_t i = 0; i < count; i++) { tud_cdc_write_char(buf[i]); - - if ( buf[i] == '\r' ) tud_cdc_write_char('\n'); + if (buf[i] == '\r') { + tud_cdc_write_char('\n'); + } } tud_cdc_write_flush(); } @@ -137,29 +133,25 @@ void echo_all(uint8_t buf[], uint32_t count) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -170,61 +162,53 @@ void tud_resume_cb(void) // Invoked when a control transfer occurred on an interface of this class // Driver response accordingly to the request and the transfer stage (setup/data/ack) // return false to stall control endpoint (e.g unsupported request) -bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) -{ +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { // nothing to with DATA & ACK stage if (stage != CONTROL_STAGE_SETUP) return true; - switch (request->bmRequestType_bit.type) - { + switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: - switch (request->bRequest) - { + switch (request->bRequest) { case VENDOR_REQUEST_WEBUSB: // match vendor request in BOS descriptor // Get landing page url - return tud_control_xfer(rhport, request, (void*)(uintptr_t) &desc_url, desc_url.bLength); + return tud_control_xfer(rhport, request, (void*)(uintptr_t)&desc_url, desc_url.bLength); case VENDOR_REQUEST_MICROSOFT: - if ( request->wIndex == 7 ) - { + if (request->wIndex == 7) { // Get Microsoft OS 2.0 compatible descriptor uint16_t total_len; - memcpy(&total_len, desc_ms_os_20+8, 2); + memcpy(&total_len, desc_ms_os_20 + 8, 2); - return tud_control_xfer(rhport, request, (void*)(uintptr_t) desc_ms_os_20, total_len); - }else - { + return tud_control_xfer(rhport, request, (void*)(uintptr_t)desc_ms_os_20, total_len); + } else { return false; } default: break; } - break; + break; case TUSB_REQ_TYPE_CLASS: - if (request->bRequest == 0x22) - { + if (request->bRequest == 0x22) { // Webserial simulate the CDC_REQUEST_SET_CONTROL_LINE_STATE (0x22) to connect and disconnect. web_serial_connected = (request->wValue != 0); // Always lit LED if connected - if ( web_serial_connected ) - { + if (web_serial_connected) { board_led_write(true); blink_interval_ms = BLINK_ALWAYS_ON; tud_vendor_write_str("\r\nWebUSB interface connected\r\n"); tud_vendor_write_flush(); - }else - { + } else { blink_interval_ms = BLINK_MOUNTED; } // response with status OK return tud_control_status(rhport, request); } - break; + break; default: break; } @@ -233,32 +217,24 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ return false; } -void webserial_task(void) -{ - if ( web_serial_connected ) - { - if ( tud_vendor_available() ) - { - uint8_t buf[64]; - uint32_t count = tud_vendor_read(buf, sizeof(buf)); +void tud_vendor_rx_cb(uint8_t itf, uint8_t const* buffer, uint16_t bufsize) { + (void) itf; - // echo back to both web serial and cdc - echo_all(buf, count); - } - } -} + echo_all(buffer, bufsize); + // if using RX buffered is enabled, we need to flush the buffer to make room for new data + #if CFG_TUD_VENDOR_RX_BUFSIZE > 0 + tud_vendor_read_flush(); + #endif +} //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ -void cdc_task(void) -{ - if ( tud_cdc_connected() ) - { +void cdc_task(void) { + if (tud_cdc_connected()) { // connected and there are data available - if ( tud_cdc_available() ) - { + if (tud_cdc_available()) { uint8_t buf[64]; uint32_t count = tud_cdc_read(buf, sizeof(buf)); @@ -270,34 +246,30 @@ void cdc_task(void) } // Invoked when cdc when line state changed e.g connected/disconnected -void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) -{ - (void) itf; +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { + (void)itf; // connected - if ( dtr && rts ) - { + if (dtr && rts) { // print initial message when connected tud_cdc_write_str("\r\nTinyUSB WebUSB device example\r\n"); } } // Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ - (void) itf; +void tud_cdc_rx_cb(uint8_t itf) { + (void)itf; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index fde732b9e..b86ad3752 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -102,7 +102,7 @@ #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // Vendor FIFO size of TX and RX -// If not configured vendor endpoints will not be buffered +// If zero: vendor endpoints will not be buffered #define CFG_TUD_VENDOR_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #define CFG_TUD_VENDOR_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index b01fae8e3..2b69a5b56 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -87,29 +87,40 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_CDC_IN 2 - #define EPNUM_CDC_OUT 2 - #define EPNUM_VENDOR_IN 5 - #define EPNUM_VENDOR_OUT 5 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X - // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_CDC_IN 2 - #define EPNUM_CDC_OUT 3 - #define EPNUM_VENDOR_IN 4 - #define EPNUM_VENDOR_OUT 5 -#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_VENDOR_OUT 0x05 + #define EPNUM_VENDOR_IN 0x85 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x81 + + #define EPNUM_VENDOR_OUT 0x05 + #define EPNUM_VENDOR_IN 0x84 + +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_CDC_IN 2 - #define EPNUM_CDC_OUT 3 - #define EPNUM_VENDOR_IN 4 - #define EPNUM_VENDOR_OUT 5 + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + + #define EPNUM_VENDOR_OUT 0x04 + #define EPNUM_VENDOR_IN 0x85 + #else - #define EPNUM_CDC_IN 2 - #define EPNUM_CDC_OUT 2 - #define EPNUM_VENDOR_IN 3 - #define EPNUM_VENDOR_OUT 3 + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + + #define EPNUM_VENDOR_OUT 0x03 + #define EPNUM_VENDOR_IN 0x83 #endif uint8_t const desc_configuration[] = @@ -118,7 +129,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC_OUT, 0x80 | EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, 0x80 | EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & IN address, EP size TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR_OUT, 0x80 | EPNUM_VENDOR_IN, TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt index f11074e93..c5e3ffce4 100644 --- a/examples/dual/CMakeLists.txt +++ b/examples/dual/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/dual/CMakePresets.json b/examples/dual/CMakePresets.json new file mode 100644 index 000000000..c22e8c0ec --- /dev/null +++ b/examples/dual/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index a6557c2d0..6ae5b5766 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -28,13 +28,15 @@ target_include_directories(${PROJECT} PUBLIC family_configure_dual_usb_example(${PROJECT} noos) # due to warnings from Pico-PIO-USB -target_compile_options(${PROJECT} PUBLIC - -Wno-error=shadow - -Wno-error=cast-align - -Wno-error=cast-qual - -Wno-error=redundant-decls - -Wno-error=sign-conversion - -Wno-error=conversion - -Wno-error=sign-compare - -Wno-error=unused-function - ) +if (FAMILY STREQUAL rp2040) + target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) +endif () diff --git a/examples/dual/host_hid_to_device_cdc/CMakePresets.json b/examples/dual/host_hid_to_device_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 2c2168f5d..474ae9814 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -8,7 +8,7 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference +CFLAGS_GCC += -Wno-error=cast-align -Wno-error=null-dereference SRC_C += \ src/class/hid/hid_host.c \ diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index cfc87eb4e..3f40b4e7c 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -4,3 +4,6 @@ board:mcb1800 mcu:RP2040 mcu:ra6m5 mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 0b4165e38..633f7a6ac 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -79,8 +79,17 @@ int main(void) { printf("TinyUSB Host HID <-> Device CDC Example\r\n"); // init device and host stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); + + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt index a6557c2d0..6ae5b5766 100644 --- a/examples/dual/host_info_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -28,13 +28,15 @@ target_include_directories(${PROJECT} PUBLIC family_configure_dual_usb_example(${PROJECT} noos) # due to warnings from Pico-PIO-USB -target_compile_options(${PROJECT} PUBLIC - -Wno-error=shadow - -Wno-error=cast-align - -Wno-error=cast-qual - -Wno-error=redundant-decls - -Wno-error=sign-conversion - -Wno-error=conversion - -Wno-error=sign-compare - -Wno-error=unused-function - ) +if (FAMILY STREQUAL rp2040) + target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) +endif () diff --git a/examples/dual/host_info_to_device_cdc/CMakePresets.json b/examples/dual/host_info_to_device_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_info_to_device_cdc/Makefile b/examples/dual/host_info_to_device_cdc/Makefile index 0ede79c17..083c9169a 100644 --- a/examples/dual/host_info_to_device_cdc/Makefile +++ b/examples/dual/host_info_to_device_cdc/Makefile @@ -8,7 +8,7 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference +CFLAGS_GCC += -Wno-error=cast-align -Wno-error=null-dereference SRC_C += \ src/host/hub.c \ diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt index cfc87eb4e..3f40b4e7c 100644 --- a/examples/dual/host_info_to_device_cdc/only.txt +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -4,3 +4,6 @@ board:mcb1800 mcu:RP2040 mcu:ra6m5 mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 5be531098..7e593f234 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -24,7 +24,7 @@ */ /* Host example will get device descriptors of attached devices and print it out via device cdc as follows: - * Device 1: ID 046d:c52f + * Device 1: ID 046d:c52f SN 11223344 Device Descriptor: bLength 18 bDescriptorType 1 @@ -70,8 +70,11 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; static bool is_print[CFG_TUH_DEVICE_MAX+1] = { 0 }; +static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); +static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device); + void led_blinking_task(void); void cdc_task(void); @@ -82,8 +85,17 @@ int main(void) { printf("TinyUSB Host Information -> Device CDC Example\r\n"); // init device and host stack on configured roothub port - tud_init(BOARD_TUD_RHPORT); - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUD_RHPORT, &dev_init); + + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -126,84 +138,99 @@ void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } -#if 1 +void cdc_task(void) { + if (!tud_cdc_connected()) { + // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. + // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop + board_delay(20); + return; + } + + for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { + if (tuh_mounted(daddr)) { + if (is_print[daddr]) { + is_print[daddr] = false; + print_device_info(daddr, &descriptor_device[daddr]); + tud_cdc_write_flush(); + } + } + } +} + +//--------------------------------------------------------------------+ +// Host Get device information +//--------------------------------------------------------------------+ #define cdc_printf(...) \ do { \ char _tempbuf[256]; \ - int count = sprintf(_tempbuf, __VA_ARGS__); \ - tud_cdc_write(_tempbuf, (uint32_t) count); \ - tud_cdc_write_flush(); \ - tud_task(); \ + char* _bufptr = _tempbuf; \ + uint32_t count = (uint32_t) sprintf(_tempbuf, __VA_ARGS__); \ + while (count > 0) { \ + uint32_t wr_count = tud_cdc_write(_bufptr, count); \ + count -= wr_count; \ + _bufptr += wr_count; \ + if (count > 0){ \ + tud_task();\ + tud_cdc_write_flush(); \ + } \ + } \ } while(0) -#endif -//#define cdc_printf printf +static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device) { + // Get String descriptor using Sync API + uint16_t serial[64]; + uint16_t buf[128]; + (void) buf; -void print_device_info(uint8_t daddr) { - tusb_desc_device_t desc_device; - uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); + cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device->idVendor, desc_device->idProduct); + uint8_t xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); if (XFER_RESULT_SUCCESS != xfer_result) { - tud_cdc_write_str("Failed to get device descriptor\r\n"); - return; + serial[0] = 'n'; + serial[1] = '/'; + serial[2] = 'a'; + serial[3] = 0; } + print_utf16(serial, TU_ARRAY_SIZE(serial)); + cdc_printf("\r\n"); - cdc_printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); cdc_printf("Device Descriptor:\r\n"); - cdc_printf(" bLength %u\r\n" , desc_device.bLength); - cdc_printf(" bDescriptorType %u\r\n" , desc_device.bDescriptorType); - cdc_printf(" bcdUSB %04x\r\n" , desc_device.bcdUSB); - cdc_printf(" bDeviceClass %u\r\n" , desc_device.bDeviceClass); - cdc_printf(" bDeviceSubClass %u\r\n" , desc_device.bDeviceSubClass); - cdc_printf(" bDeviceProtocol %u\r\n" , desc_device.bDeviceProtocol); - cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device.bMaxPacketSize0); - cdc_printf(" idVendor 0x%04x\r\n" , desc_device.idVendor); - cdc_printf(" idProduct 0x%04x\r\n" , desc_device.idProduct); - cdc_printf(" bcdDevice %04x\r\n" , desc_device.bcdDevice); - - // Get String descriptor using Sync API - uint16_t buf[128]; + cdc_printf(" bLength %u\r\n" , desc_device->bLength); + cdc_printf(" bDescriptorType %u\r\n" , desc_device->bDescriptorType); + cdc_printf(" bcdUSB %04x\r\n" , desc_device->bcdUSB); + cdc_printf(" bDeviceClass %u\r\n" , desc_device->bDeviceClass); + cdc_printf(" bDeviceSubClass %u\r\n" , desc_device->bDeviceSubClass); + cdc_printf(" bDeviceProtocol %u\r\n" , desc_device->bDeviceProtocol); + cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device->bMaxPacketSize0); + cdc_printf(" idVendor 0x%04x\r\n" , desc_device->idVendor); + cdc_printf(" idProduct 0x%04x\r\n" , desc_device->idProduct); + cdc_printf(" bcdDevice %04x\r\n" , desc_device->bcdDevice); - cdc_printf(" iManufacturer %u " , desc_device.iManufacturer); + cdc_printf(" iManufacturer %u " , desc_device->iManufacturer); xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result ) { + if (XFER_RESULT_SUCCESS == xfer_result) { print_utf16(buf, TU_ARRAY_SIZE(buf)); } - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); - cdc_printf(" iProduct %u " , desc_device.iProduct); + cdc_printf(" iProduct %u " , desc_device->iProduct); xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); if (XFER_RESULT_SUCCESS == xfer_result) { print_utf16(buf, TU_ARRAY_SIZE(buf)); } - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); - cdc_printf(" iSerialNumber %u " , desc_device.iSerialNumber); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); - } - tud_cdc_write_str("\r\n"); + cdc_printf(" iSerialNumber %u " , desc_device->iSerialNumber); + cdc_printf((char*)serial); // serial is already to UTF-8 + cdc_printf("\r\n"); - cdc_printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + cdc_printf(" bNumConfigurations %u\r\n" , desc_device->bNumConfigurations); } -void cdc_task(void) { - if (tud_cdc_connected()) { - for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { - if (tuh_mounted(daddr)) { - if (is_print[daddr]) { - is_print[daddr] = false; - print_device_info(daddr); - tud_cdc_write_flush(); - } - } - } - } +void tuh_enum_descriptor_device_cb(uint8_t daddr, tusb_desc_device_t const* desc_device) { + (void) daddr; + descriptor_device[daddr] = *desc_device; // save device descriptor } -//--------------------------------------------------------------------+ -// Host Get device information -//--------------------------------------------------------------------+ void tuh_mount_cb(uint8_t daddr) { printf("mounted device %u\r\n", daddr); is_print[daddr] = true; @@ -279,7 +306,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - tud_cdc_write(temp_buf, utf8_len); - tud_cdc_write_flush(); - tud_task(); + cdc_printf((char*) temp_buf); } diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index 793f6ab08..2783dd84e 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) @@ -11,4 +11,5 @@ family_add_subdirectory(cdc_msc_hid) family_add_subdirectory(cdc_msc_hid_freertos) family_add_subdirectory(device_info) family_add_subdirectory(hid_controller) +family_add_subdirectory(midi_rx) family_add_subdirectory(msc_file_explorer) diff --git a/examples/host/CMakePresets.json b/examples/host/CMakePresets.json new file mode 100644 index 000000000..c22e8c0ec --- /dev/null +++ b/examples/host/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 76182d6fa..0efe84b60 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/bare_api/CMakePresets.json b/examples/host/bare_api/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/bare_api/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index ae574c078..0c76ff0c9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -55,21 +55,23 @@ uint8_t* get_hid_buf(uint8_t daddr); void free_hid_buf(uint8_t daddr); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); } - while (1) - { + while (1) { // tinyusb host task tuh_task(); led_blinking_task(); @@ -81,8 +83,7 @@ int main(void) /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) -void tuh_mount_cb (uint8_t daddr) -{ +void tuh_mount_cb(uint8_t daddr) { printf("Device attached, address = %d\r\n", daddr); // Get Device Descriptor @@ -91,8 +92,7 @@ void tuh_mount_cb (uint8_t daddr) } /// Invoked when device is unmounted (bus reset/unplugged) -void tuh_umount_cb(uint8_t daddr) -{ +void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); free_hid_buf(daddr); } @@ -100,11 +100,8 @@ void tuh_umount_cb(uint8_t daddr) //--------------------------------------------------------------------+ // Device Descriptor //--------------------------------------------------------------------+ - -void print_device_descriptor(tuh_xfer_t* xfer) -{ - if ( XFER_RESULT_SUCCESS != xfer->result ) - { +void print_device_descriptor(tuh_xfer_t *xfer) { + if (XFER_RESULT_SUCCESS != xfer->result) { printf("Failed to get device descriptor\r\n"); return; } @@ -127,33 +124,29 @@ void print_device_descriptor(tuh_xfer_t* xfer) // Get String descriptor using Sync API uint16_t temp_buf[128]; - printf(" iManufacturer %u " , desc_device.iManufacturer); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) ) - { + printf(" iManufacturer %u ", desc_device.iManufacturer); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iProduct %u " , desc_device.iProduct); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iProduct %u ", desc_device.iProduct); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iSerialNumber %u " , desc_device.iSerialNumber); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iSerialNumber %u ", desc_device.iSerialNumber); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); // Get configuration descriptor with sync API - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) - { - parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) { + parse_config_descriptor(daddr, (tusb_desc_configuration_t *) temp_buf); } } @@ -167,37 +160,33 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); // simple configuration parser to open and listen to HID Endpoint IN -void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) -{ - uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); - uint8_t const* p_desc = tu_desc_next(desc_cfg); +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const *desc_cfg) { + uint8_t const *desc_end = ((uint8_t const *) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); + uint8_t const *p_desc = tu_desc_next(desc_cfg); // parse each interfaces - while( p_desc < desc_end ) - { + while (p_desc < desc_end) { uint8_t assoc_itf_count = 1; // Class will always starts with Interface Association (if any) and then Interface descriptor - if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) - { - tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; + if (TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc)) { + tusb_desc_interface_assoc_t const *desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; assoc_itf_count = desc_iad->bInterfaceCount; - p_desc = tu_desc_next(p_desc); // next to Interface + p_desc = tu_desc_next(p_desc);// next to Interface } // must be interface from now - if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return; - tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc; + if (TUSB_DESC_INTERFACE != tu_desc_type(p_desc)) { return; } + tusb_desc_interface_t const *desc_itf = (tusb_desc_interface_t const *) p_desc; - uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc)); + uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end - p_desc)); // probably corrupted descriptor - if(drv_len < sizeof(tusb_desc_interface_t)) return; + if (drv_len < sizeof(tusb_desc_interface_t)) { return; } // only open and listen to HID endpoint IN - if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) - { + if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) { open_hid_interface(dev_addr, desc_itf, drv_len); } @@ -206,25 +195,21 @@ void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* } } -uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len) -{ - uint8_t const* p_desc = (uint8_t const*) desc_itf; +uint16_t count_interface_total_len(tusb_desc_interface_t const *desc_itf, uint8_t itf_count, uint16_t max_len) { + uint8_t const *p_desc = (uint8_t const *) desc_itf; uint16_t len = 0; - while (itf_count--) - { + while (itf_count--) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); - while (len < max_len) - { + while (len < max_len) { // return on IAD regardless of itf count - if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len; + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { return len; } - if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && - ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 ) - { + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && + ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == 0) { break; } @@ -242,46 +227,45 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void hid_report_received(tuh_xfer_t* xfer); -void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) { // len = interface + hid + n*endpoints uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); // corrupted descriptor - if (max_len < drv_len) return; + if (max_len < drv_len) { return; } uint8_t const *p_desc = (uint8_t const *) desc_itf; // HID descriptor p_desc = tu_desc_next(p_desc); tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc; - if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return; + if (HID_DESC_TYPE_HID != desc_hid->bDescriptorType) { return; } // Endpoint descriptor p_desc = tu_desc_next(p_desc); - tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc; + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; - for(int i = 0; i < desc_itf->bNumEndpoints; i++) - { - if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return; + for (int i = 0; i < desc_itf->bNumEndpoints; i++) { + if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) { return; } - if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { - // skip if failed to open endpoint - if ( ! tuh_edpt_open(daddr, desc_ep) ) return; + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + if (!tuh_edpt_open(daddr, desc_ep)) { + return; // skip if failed to open endpoint + } - uint8_t* buf = get_hid_buf(daddr); - if (!buf) return; // out of memory + uint8_t *buf = get_hid_buf(daddr); + if (!buf) { + return;// out of memory + } - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = desc_ep->bEndpointAddress, - .buflen = 64, - .buffer = buf, - .complete_cb = hid_report_received, - .user_data = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = desc_ep->bEndpointAddress, + .buflen = 64, + .buffer = buf, + .complete_cb = hid_report_received, + .user_data = (uintptr_t) buf,// since buffer is not available in callback, use user data to store the buffer }; // submit transfer for this EP @@ -295,18 +279,17 @@ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, ui } } -void hid_report_received(tuh_xfer_t* xfer) -{ +void hid_report_received(tuh_xfer_t *xfer) { // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback - uint8_t* buf = (uint8_t*) xfer->user_data; + uint8_t *buf = (uint8_t *) xfer->user_data; - if (xfer->result == XFER_RESULT_SUCCESS) - { + if (xfer->result == XFER_RESULT_SUCCESS) { printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr); - for(uint32_t i=0; i<xfer->actual_len; i++) - { - if (i%16 == 0) printf("\r\n "); + for (uint32_t i = 0; i < xfer->actual_len; i++) { + if (i % 16 == 0) { + printf("\r\n "); + } printf("%02X ", buf[i]); } printf("\r\n"); @@ -325,12 +308,9 @@ void hid_report_received(tuh_xfer_t* xfer) //--------------------------------------------------------------------+ // get an buffer from pool -uint8_t* get_hid_buf(uint8_t daddr) -{ - for(size_t i=0; i<BUF_COUNT; i++) - { - if (buf_owner[i] == 0) - { +uint8_t *get_hid_buf(uint8_t daddr) { + for (size_t i = 0; i < BUF_COUNT; i++) { + if (buf_owner[i] == 0) { buf_owner[i] = daddr; return buf_pool[i]; } @@ -341,10 +321,8 @@ uint8_t* get_hid_buf(uint8_t daddr) } // free all buffer owned by device -void free_hid_buf(uint8_t daddr) -{ - for(size_t i=0; i<BUF_COUNT; i++) - { +void free_hid_buf(uint8_t daddr) { + for (size_t i = 0; i < BUF_COUNT; i++) { if (buf_owner[i] == daddr) buf_owner[i] = 0; } } @@ -352,70 +330,70 @@ void free_hid_buf(uint8_t daddr) //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) { + return; // not enough time + } start_ms += interval_ms; board_led_write(led_state); - led_state = 1 - led_state; // toggle + led_state = 1 - led_state;// toggle } //--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ - static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) { - // TODO: Check for runover. - (void)utf8_len; - // Get the UTF-16 length out of the data itself. + // TODO: Check for runover. + (void) utf8_len; + // Get the UTF-16 length out of the data itself. - for (size_t i = 0; i < utf16_len; i++) { - uint16_t chr = utf16[i]; - if (chr < 0x80) { - *utf8++ = chr & 0xffu; - } else if (chr < 0x800) { - *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } else { - // TODO: Verify surrogate. - *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } - // TODO: Handle UTF-16 code points that take two entries. + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t) (0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t) (0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); } + // TODO: Handle UTF-16 code points that take two entries. + } } // Count how many bytes a utf-16-le encoded string will take in utf-8. static int _count_utf8_bytes(const uint16_t *buf, size_t len) { - size_t total_bytes = 0; - for (size_t i = 0; i < len; i++) { - uint16_t chr = buf[i]; - if (chr < 0x80) { - total_bytes += 1; - } else if (chr < 0x800) { - total_bytes += 2; - } else { - total_bytes += 3; - } - // TODO: Handle UTF-16 code points that take two entries. + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; } - return (int) total_bytes; + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { - if ((temp_buf[0] & 0xff) == 0) return; // empty - size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); - size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); - _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); - ((uint8_t*) temp_buf)[utf8_len] = '\0'; + if ((temp_buf[0] & 0xff) == 0) return;// empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t *) temp_buf)[utf8_len] = '\0'; - printf("%s", (char*)temp_buf); + printf("%s", (char *) temp_buf); } diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index fab233be0..a03675c5f 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index a7c372a34..e8928cda5 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/cdc_msc_hid/CMakePresets.json b/examples/host/cdc_msc_hid/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index 4a13f8b27..e68ec383b 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -size_t get_console_inputs(uint8_t* buf, size_t bufsize) { +static size_t get_console_inputs(uint8_t* buf, size_t bufsize) { size_t count = 0; while (count < bufsize) { int ch = board_getchar(); diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 6bb3a2072..a751c9c80 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -39,18 +39,16 @@ static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; // Each HID instance can has multiple reports -static struct -{ +static struct { uint8_t report_count; tuh_hid_report_info_t report_info[MAX_REPORT]; -}hid_info[CFG_TUH_HID]; +} hid_info[CFG_TUH_HID]; static void process_kbd_report(hid_keyboard_report_t const *report); static void process_mouse_report(hid_mouse_report_t const * report); static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len); -void hid_app_task(void) -{ +void hid_app_task(void) { // nothing to do } @@ -63,64 +61,57 @@ void hid_app_task(void) // can be used to parse common/simple enough descriptor. // Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped // therefore report_desc = NULL, desc_len = 0 -void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) -{ +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *desc_report, uint16_t desc_len) { printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); // Interface protocol (hid_interface_protocol_enum_t) - const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; + const char *protocol_str[] = {"None", "Keyboard", "Mouse"}; uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]); // By default host stack will use activate boot protocol on supported interface. // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser) - if ( itf_protocol == HID_ITF_PROTOCOL_NONE ) - { + if (itf_protocol == HID_ITF_PROTOCOL_NONE) { hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, desc_report, desc_len); printf("HID has %u reports \r\n", hid_info[instance].report_count); } // request to receive report // tuh_hid_report_received_cb() will be invoked when report is available - if ( !tuh_hid_receive_report(dev_addr, instance) ) - { + if (!tuh_hid_receive_report(dev_addr, instance)) { printf("Error: cannot request to receive report\r\n"); } } // Invoked when device with hid interface is un-mounted -void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) -{ +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) { printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); } // Invoked when received report from device via interrupt endpoint -void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) -{ +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); - switch (itf_protocol) - { + switch (itf_protocol) { case HID_ITF_PROTOCOL_KEYBOARD: TU_LOG2("HID receive boot keyboard report\r\n"); - process_kbd_report( (hid_keyboard_report_t const*) report ); - break; + process_kbd_report((hid_keyboard_report_t const *) report); + break; case HID_ITF_PROTOCOL_MOUSE: TU_LOG2("HID receive boot mouse report\r\n"); - process_mouse_report( (hid_mouse_report_t const*) report ); - break; + process_mouse_report((hid_mouse_report_t const *) report); + break; default: // Generic report requires matching ReportID and contents with previous parsed report info process_generic_report(dev_addr, instance, report, len); - break; + break; } // continue to request to receive report - if ( !tuh_hid_receive_report(dev_addr, instance) ) - { + if (!tuh_hid_receive_report(dev_addr, instance)) { printf("Error: cannot request to receive report\r\n"); } } @@ -130,13 +121,12 @@ void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t cons //--------------------------------------------------------------------+ // look up new key in previous keys -static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) -{ - for(uint8_t i=0; i<6; i++) - { - if (report->keycode[i] == keycode) return true; +static inline bool find_key_in_report(hid_keyboard_report_t const* report, uint8_t keycode) { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i] == keycode) { + return true; + } } - return false; } @@ -175,8 +165,7 @@ static void process_kbd_report(hid_keyboard_report_t const *report) // Mouse //--------------------------------------------------------------------+ -void cursor_movement(int8_t x, int8_t y, int8_t wheel) -{ +static void cursor_movement(int8_t x, int8_t y, int8_t wheel) { #if USE_ANSI_ESCAPE // Move X using ansi escape if ( x < 0) @@ -232,29 +221,24 @@ static void process_mouse_report(hid_mouse_report_t const * report) //--------------------------------------------------------------------+ // Generic Report //--------------------------------------------------------------------+ -static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) -{ +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { (void) dev_addr; (void) len; uint8_t const rpt_count = hid_info[instance].report_count; - tuh_hid_report_info_t* rpt_info_arr = hid_info[instance].report_info; - tuh_hid_report_info_t* rpt_info = NULL; + tuh_hid_report_info_t *rpt_info_arr = hid_info[instance].report_info; + tuh_hid_report_info_t *rpt_info = NULL; - if ( rpt_count == 1 && rpt_info_arr[0].report_id == 0) - { + if (rpt_count == 1 && rpt_info_arr[0].report_id == 0) { // Simple report without report ID as 1st byte rpt_info = &rpt_info_arr[0]; - }else - { + } else { // Composite report, 1st byte is report ID, data starts from 2nd byte uint8_t const rpt_id = report[0]; // Find report id in the array - for(uint8_t i=0; i<rpt_count; i++) - { - if (rpt_id == rpt_info_arr[i].report_id ) - { + for (uint8_t i = 0; i < rpt_count; i++) { + if (rpt_id == rpt_info_arr[i].report_id) { rpt_info = &rpt_info_arr[i]; break; } @@ -264,8 +248,7 @@ static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t c len--; } - if (!rpt_info) - { + if (!rpt_info) { printf("Couldn't find report info !\r\n"); return; } @@ -277,23 +260,22 @@ static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t c // - Consumer Control (Media Key) : Consumer, Consumer Control // - System Control (Power key) : Desktop, System Control // - Generic (vendor) : 0xFFxx, xx - if ( rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP ) - { - switch (rpt_info->usage) - { + if (rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP) { + switch (rpt_info->usage) { case HID_USAGE_DESKTOP_KEYBOARD: TU_LOG1("HID receive keyboard report\r\n"); // Assume keyboard follow boot report layout - process_kbd_report( (hid_keyboard_report_t const*) report ); - break; + process_kbd_report((hid_keyboard_report_t const *) report); + break; case HID_USAGE_DESKTOP_MOUSE: TU_LOG1("HID receive mouse report\r\n"); // Assume mouse follow boot report layout - process_mouse_report( (hid_mouse_report_t const*) report ); - break; + process_mouse_report((hid_mouse_report_t const *) report); + break; - default: break; + default: + break; } } } diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index a3b80e030..7b02e238e 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -31,18 +31,12 @@ #include "tusb.h" //--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF PROTYPES +// MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); extern void cdc_app_task(void); extern void hid_app_task(void); -#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 -// API to read/rite MAX3421's register. Implemented by TinyUSB -extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); -extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); -#endif - /*------------- MAIN -------------*/ int main(void) { board_init(); @@ -50,7 +44,11 @@ int main(void) { printf("TinyUSB Host CDC MSC HID Example\r\n"); // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -78,12 +76,12 @@ int main(void) { void tuh_mount_cb(uint8_t dev_addr) { // application set-up - printf("A device with address %d is mounted\r\n", dev_addr); + printf("A device with address %u is mounted\r\n", dev_addr); } void tuh_umount_cb(uint8_t dev_addr) { // application tear-down - printf("A device with address %d is unmounted \r\n", dev_addr); + printf("A device with address %u is unmounted \r\n", dev_addr); } @@ -97,7 +95,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) { + return;// not enough time + } start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index a59a0ffb9..cc8d6e5c4 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt index 2e95a18e0..78b2784fe 100644 --- a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt +++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -20,7 +20,6 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c diff --git a/examples/host/cdc_msc_hid_freertos/CMakePresets.json b/examples/host/cdc_msc_hid_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index bf4725f47..178341f81 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,34 +1,17 @@ +RTOS = freertos include ../../build_system/make/make.mk -FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) - INC += \ src \ - src/FreeRTOSConfig \ $(TOP)/hw \ - $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) \ # Example source EXAMPLE_SOURCE = \ src/cdc_app.c \ - src/freertos_hook.c \ src/hid_app.c \ src/main.c \ src/msc_app.c \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# FreeRTOS source, all files in port folder -SRC_C += \ - $(FREERTOS_SRC)/list.c \ - $(FREERTOS_SRC)/queue.c \ - $(FREERTOS_SRC)/tasks.c \ - $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) - -SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) - include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 1e0e60075..e3ae25260 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -1,3 +1,4 @@ +mcu:ESP32P4 mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -9,3 +10,6 @@ mcu:MIMXRT11XX mcu:MSP432E4 mcu:RX65X mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index bd754518d..000000000 --- a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - -// Include MCU header -#include "bsp/board_mcu.h" - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" -#endif - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wredundant-decls" -#endif - -// TODO fix later -// FIXME cause redundant-decls warnings -#if CFG_TUSB_MCU == OPT_MCU_MM32F327X - extern u32 SystemCoreClock; -#else - extern uint32_t SystemCoreClock; -#endif - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 0 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -#ifdef __RX__ -/* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 -#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 - -#else - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ -#if defined(__NVIC_PRIO_BITS) - // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h - #define configPRIO_BITS __NVIC_PRIO_BITS - -#elif defined(__ECLIC_INTCTLBITS) - // RISC-V Bumblebee core from nuclei - #define configPRIO_BITS __ECLIC_INTCTLBITS - -#elif defined(__IASMARM__) - // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. - // Therefore we will hard coded it to minimum value of 2 to get pass ci build. - // IAR user must update this to correct value of the target MCU - #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" - #define configPRIO_BITS 2 - -#else - #error "FreeRTOS configPRIO_BITS to be defined" -#endif - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) - -/* The highest interrupt priority that can be used by any interrupt service -routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL -INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER -PRIORITY THAN THIS! (higher priorities are lower numeric values. */ -#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 - -/* Interrupt priorities used by the kernel port layer itself. These are generic -to all Cortex-M ports, and do not rely on any particular library functions. */ -#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! -See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) - -#endif - -#endif /* __FREERTOS_CONFIG__H */ diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index f3495ab28..e279ad509 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,23 +27,9 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TUP_MCU_ESPRESSIF -// ESP-IDF need "freertos/" prefix in include path. -// CFG_TUSB_OS_INC_PATH should be defined accordingly. - #include "freertos/FreeRTOS.h" - #include "freertos/semphr.h" - #include "freertos/queue.h" - #include "freertos/task.h" - #include "freertos/timers.h" - +#if TUSB_MCU_VENDOR_ESPRESSIF #define CDC_STACK_SZIE 2048 #else - #include "FreeRTOS.h" - #include "semphr.h" - #include "queue.h" - #include "task.h" - #include "timers.h" - #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) #endif @@ -66,7 +52,7 @@ void cdc_app_init(void) { } // helper -size_t get_console_inputs(uint8_t *buf, size_t bufsize) { +static size_t get_console_inputs(uint8_t *buf, size_t bufsize) { size_t count = 0; while (count < bufsize) { int ch = board_getchar(); diff --git a/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c deleted file mode 100644 index 07d159fd5..000000000 --- a/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#include "FreeRTOS.h" -#include "task.h" -#include "common/tusb_common.h" - -void vApplicationMallocFailedHook(void) { - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false,); -} - -void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) { - (void) pxTask; - (void) pcTaskName; - - taskDISABLE_INTERRUPTS(); - TU_ASSERT(false,); -} - -/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an - * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is - * used by the Idle task. */ -void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, - uint32_t *pulIdleTaskStackSize) { - /* If the buffers to be provided to the Idle task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xIdleTaskTCB; - static StackType_t uxIdleTaskStack[configMINIMAL_STACK_SIZE]; - - /* Pass out a pointer to the StaticTask_t structure in which the Idle task's - state will be stored. */ - *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; - - /* Pass out the array that will be used as the Idle task's stack. */ - *ppxIdleTaskStackBuffer = uxIdleTaskStack; - - /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configMINIMAL_STACK_SIZE is specified in words, not bytes. */ - *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; -} - -/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the - * application must provide an implementation of vApplicationGetTimerTaskMemory() - * to provide the memory that is used by the Timer service task. */ -void vApplicationGetTimerTaskMemory(StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, - uint32_t *pulTimerTaskStackSize) { - /* If the buffers to be provided to the Timer task are declared inside this - * function then they must be declared static - otherwise they will be allocated on - * the stack and so not exists after this function exits. */ - static StaticTask_t xTimerTaskTCB; - static StackType_t uxTimerTaskStack[configTIMER_TASK_STACK_DEPTH]; - - /* Pass out a pointer to the StaticTask_t structure in which the Timer - task's state will be stored. */ - *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; - - /* Pass out the array that will be used as the Timer task's stack. */ - *ppxTimerTaskStackBuffer = uxTimerTaskStack; - - /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. - Note that, as the array is necessarily of type StackType_t, - configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ - *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; -} - -#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X -#include "iodefine.h" -void vApplicationSetupTimerInterrupt(void) -{ - /* Enable CMT0 */ - SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8); - - CMT0.CMCNT = 0; - CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); - CMT0.CMCR.WORD = TU_BIT(6) | 2; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -} -#endif diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index fa799aede..64a108254 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,23 +30,9 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUP_MCU_ESPRESSIF - // ESP-IDF need "freertos/" prefix in include path. - // CFG_TUSB_OS_INC_PATH should be defined accordingly. - #include "freertos/FreeRTOS.h" - #include "freertos/semphr.h" - #include "freertos/queue.h" - #include "freertos/task.h" - #include "freertos/timers.h" - +#if TUSB_MCU_VENDOR_ESPRESSIF #define USBH_STACK_SIZE 4096 #else - #include "FreeRTOS.h" - #include "semphr.h" - #include "queue.h" - #include "task.h" - #include "timers.h" - // Increase stack size when debug log is enabled #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif @@ -83,12 +69,6 @@ extern void cdc_app_init(void); extern void hid_app_init(void); extern void msc_app_init(void); -#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 -// API to read/rite MAX3421's register. Implemented by TinyUSB -extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); -extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); -#endif - /*------------- MAIN -------------*/ int main(void) { board_init(); @@ -107,14 +87,14 @@ int main(void) { xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUP_MCU_ESPRESSIF +#if !TUSB_MCU_VENDOR_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); } @@ -126,7 +106,12 @@ static void usb_host_task(void *param) { (void) param; // init host stack on configured roothub port - if (!tuh_init(BOARD_TUH_RHPORT)) { + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + + if (!tusb_init(BOARD_TUH_RHPORT, &host_init)) { printf("Failed to init USB Host Stack\r\n"); vTaskSuspend(NULL); } diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index 9ffd5d965..6439495a8 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -25,13 +25,16 @@ #include "tusb.h" -static scsi_inquiry_resp_t inquiry_resp; +// define the buffer to be place in USB/DMA memory with correct alignment/cache line size +CFG_TUH_MEM_SECTION static struct { + TUH_EPBUF_TYPE_DEF(scsi_inquiry_resp_t, inquiry); +} scsi_resp; void msc_app_init(void) { // nothing to do } -bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) { +static bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) { msc_cbw_t const *cbw = cb_data->cbw; msc_csw_t const *csw = cb_data->csw; @@ -41,7 +44,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_dat } // Print out Vendor ID, Product ID and Rev - printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev); + printf("%.8s %.16s rev %.4s\r\n", scsi_resp.inquiry.vendor_id, scsi_resp.inquiry.product_id, scsi_resp.inquiry.product_rev); // Get capacity of device uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); @@ -58,7 +61,7 @@ void tuh_msc_mount_cb(uint8_t dev_addr) { printf("A MassStorage device is mounted\r\n"); uint8_t const lun = 0; - tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0); + tuh_msc_inquiry(dev_addr, lun, &scsi_resp.inquiry, inquiry_complete_cb, 0); } void tuh_msc_umount_cb(uint8_t dev_addr) { diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 0aab2cd2f..682265f59 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUP_MCU_ESPRESSIF +#if TUSB_MCU_VENDOR_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif @@ -74,9 +74,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/device_info/CMakeLists.txt b/examples/host/device_info/CMakeLists.txt index 76182d6fa..33953233d 100644 --- a/examples/host/device_info/CMakeLists.txt +++ b/examples/host/device_info/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) @@ -19,13 +19,13 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/host/device_info/CMakePresets.json b/examples/host/device_info/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/device_info/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index fee10f9e2..b6f87f423 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,14 +1,20 @@ +mcu:ESP32S2 +mcu:ESP32S3 +mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX +mcu:MAX3421 mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX -mcu:RP2040 mcu:MSP432E4 +mcu:RP2040 mcu:RX65X mcu:RAXXX -mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/device_info/src/CMakeLists.txt b/examples/host/device_info/src/CMakeLists.txt new file mode 100644 index 000000000..1908a32c3 --- /dev/null +++ b/examples/host/device_info/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 18beea663..e924a137b 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -24,7 +24,7 @@ */ /* Host example will get device descriptors of attached devices and print it out via uart/rtt (logger) as follows: - * Device 1: ID 046d:c52f + * Device 1: ID 046d:c52f SN 11223344 Device Descriptor: bLength 18 bDescriptorType 1 @@ -56,107 +56,136 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -void led_blinking_task(void); -static void print_utf16(uint16_t* temp_buf, size_t buf_len); +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -/*------------- MAIN -------------*/ -int main(void) { - board_init(); +// Declare for buffer for usb transfer, may need to be in USB/DMA section and +// multiple of dcache line size if dcache is enabled (for some ports). +CFG_TUH_MEM_SECTION struct { + TUH_EPBUF_TYPE_DEF(tusb_desc_device_t, device); + TUH_EPBUF_DEF(serial, 64*sizeof(uint16_t)); + TUH_EPBUF_DEF(buf, 128*sizeof(uint16_t)); +} desc; - printf("TinyUSB Device Info Example\r\n"); +void led_blinking_task(void* param); +static void print_utf16(uint16_t* temp_buf, size_t buf_len); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +void init_freertos_task(void); +#endif +//-------------------------------------------------------------------- +// Main +//-------------------------------------------------------------------- +static void init_tinyusb(void) { // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); } +} + +int main(void) { + board_init(); + printf("TinyUSB Device Info Example\r\n"); +#if CFG_TUSB_OS == OPT_OS_FREERTOS + init_freertos_task(); +#else + init_tinyusb(); while (1) { - // tinyusb host task - tuh_task(); - led_blinking_task(); + tuh_task(); // tinyusb host task + led_blinking_task(NULL); } - return 0; +#endif } /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) void tuh_mount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_MOUNTED; + // Get Device Descriptor - tusb_desc_device_t desc_device; - uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); + uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc.device, 18); if (XFER_RESULT_SUCCESS != xfer_result) { printf("Failed to get device descriptor\r\n"); return; } - uint16_t buf[256]; + printf("Device %u: ID %04x:%04x SN ", daddr, desc.device.idVendor, desc.device.idProduct); + + xfer_result = XFER_RESULT_FAILED; + if (desc.device.iSerialNumber != 0) { + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, desc.serial, sizeof(desc.serial)); + } + if (XFER_RESULT_SUCCESS != xfer_result) { + uint16_t* serial = (uint16_t*)(uintptr_t) desc.serial; + serial[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * 3 + 2)); + serial[1] = 'n'; + serial[2] = '/'; + serial[3] = 'a'; + serial[4] = 0; + } + print_utf16((uint16_t*)(uintptr_t) desc.serial, sizeof(desc.serial)/2); + printf("\r\n"); - printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); printf("Device Descriptor:\r\n"); - printf(" bLength %u\r\n", desc_device.bLength); - printf(" bDescriptorType %u\r\n", desc_device.bDescriptorType); - printf(" bcdUSB %04x\r\n", desc_device.bcdUSB); - printf(" bDeviceClass %u\r\n", desc_device.bDeviceClass); - printf(" bDeviceSubClass %u\r\n", desc_device.bDeviceSubClass); - printf(" bDeviceProtocol %u\r\n", desc_device.bDeviceProtocol); - printf(" bMaxPacketSize0 %u\r\n", desc_device.bMaxPacketSize0); - printf(" idVendor 0x%04x\r\n", desc_device.idVendor); - printf(" idProduct 0x%04x\r\n", desc_device.idProduct); - printf(" bcdDevice %04x\r\n", desc_device.bcdDevice); + printf(" bLength %u\r\n", desc.device.bLength); + printf(" bDescriptorType %u\r\n", desc.device.bDescriptorType); + printf(" bcdUSB %04x\r\n", desc.device.bcdUSB); + printf(" bDeviceClass %u\r\n", desc.device.bDeviceClass); + printf(" bDeviceSubClass %u\r\n", desc.device.bDeviceSubClass); + printf(" bDeviceProtocol %u\r\n", desc.device.bDeviceProtocol); + printf(" bMaxPacketSize0 %u\r\n", desc.device.bMaxPacketSize0); + printf(" idVendor 0x%04x\r\n", desc.device.idVendor); + printf(" idProduct 0x%04x\r\n", desc.device.idProduct); + printf(" bcdDevice %04x\r\n", desc.device.bcdDevice); // Get String descriptor using Sync API - printf(" iManufacturer %u ", desc_device.iManufacturer); - xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); + printf(" iManufacturer %u ", desc.device.iManufacturer); + if (desc.device.iManufacturer != 0) { + xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + } } printf("\r\n"); - printf(" iProduct %u ", desc_device.iProduct); - xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); + printf(" iProduct %u ", desc.device.iProduct); + if (desc.device.iProduct != 0) { + xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + } } printf("\r\n"); - printf(" iSerialNumber %u ", desc_device.iSerialNumber); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); - } + printf(" iSerialNumber %u ", desc.device.iSerialNumber); + printf((char*)desc.serial); // serial is already to UTF-8 printf("\r\n"); - printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); + printf(" bNumConfigurations %u\r\n", desc.device.bNumConfigurations); } -/// Invoked when device is unmounted (bus reset/unplugged) +// Invoked when device is unmounted (bus reset/unplugged) void tuh_umount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_NOT_MOUNTED; printf("Device removed, address = %d\r\n", daddr); } //--------------------------------------------------------------------+ -// Blinking Task -//--------------------------------------------------------------------+ -void led_blinking_task(void) { - const uint32_t interval_ms = 1000; - static uint32_t start_ms = 0; - - static bool led_state = false; - - // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return; // not enough time - start_ms += interval_ms; - - board_led_write(led_state); - led_state = 1 - led_state; // toggle -} - -//--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ @@ -208,3 +237,81 @@ static void print_utf16(uint16_t* temp_buf, size_t buf_len) { printf("%s", (char*) temp_buf); } + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void* param) { + (void) param; + static uint32_t start_ms = 0; + static bool led_state = false; + + while (1) { +#if CFG_TUSB_OS == OPT_OS_FREERTOS + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); +#else + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } +#endif + + start_ms += blink_interval_ms; + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE + +#if TUSB_MCU_VENDOR_ESPRESSIF + #define USB_STACK_SIZE 4096 +#else + // Increase stack size when debug log is enabled + #define USB_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t blinky_stack[BLINKY_STACK_SIZE]; +StaticTask_t blinky_taskdef; + +StackType_t usb_stack[USB_STACK_SIZE]; +StaticTask_t usb_taskdef; +#endif + +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { + main(); +} +#endif + +void usb_host_task(void *param) { + (void) param; + init_tinyusb(); + while (1) { + tuh_task(); + } +} + +void init_freertos_task(void) { +#if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); + xTaskCreateStatic(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_stack, &usb_taskdef); +#else + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); +#endif + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if !TUSB_MCU_VENDOR_ESPRESSIF + vTaskStartScheduler(); +#endif +} + +#endif diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 2e9731eaf..e12970c12 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -39,6 +39,11 @@ #error CFG_TUSB_MCU must be defined #endif +// Espressif IDF requires "freertos/" prefix in include path +#if TUSB_MCU_VENDOR_ESPRESSIF +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + #ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE #endif @@ -69,9 +74,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) @@ -104,8 +110,7 @@ // only hub class is enabled #define CFG_TUH_HUB 1 -// max device support (excluding hub device) -// 1 hub typically has 4 ports +// max device support (excluding hub device): 1 hub typically has 4 ports #define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) #ifdef __cplusplus diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index c1b500dd8..fb5faf210 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/hid_controller/CMakePresets.json b/examples/host/hid_controller/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/hid_controller/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index 6ffe0b6d4..1d6ca8b07 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -231,14 +231,12 @@ void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) } // check if different than 2 -bool diff_than_2(uint8_t x, uint8_t y) -{ +static inline bool diff_than_2(uint8_t x, uint8_t y) { return (x - y > 2) || (y - x > 2); } // check if 2 reports are different enough -bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2) -{ +static bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2) { bool result; // x, y, z, rz must different than 2 to be counted @@ -251,7 +249,7 @@ bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2) return result; } -void process_sony_ds4(uint8_t const* report, uint16_t len) +static void process_sony_ds4(uint8_t const* report, uint16_t len) { (void)len; const char* dpad_str[] = { "N", "NE", "E", "SE", "S", "SW", "W", "NW", "none" }; @@ -310,16 +308,13 @@ void process_sony_ds4(uint8_t const* report, uint16_t len) } // Invoked when received report from device via interrupt endpoint -void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) -{ - if ( is_sony_ds4(dev_addr) ) - { +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { + if (is_sony_ds4(dev_addr)) { process_sony_ds4(report, len); } // continue to request to receive report - if ( !tuh_hid_receive_report(dev_addr, instance) ) - { + if (!tuh_hid_receive_report(dev_addr, instance)) { printf("Error: cannot request to receive report\r\n"); } } diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 05a5ae176..ba12774bd 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -52,7 +52,11 @@ int main(void) printf("Note: Events only displayed for explicit supported controllers\r\n"); // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 3ac591d8f..351fe0178 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/midi_rx/CMakeLists.txt b/examples/host/midi_rx/CMakeLists.txt new file mode 100644 index 000000000..33953233d --- /dev/null +++ b/examples/host/midi_rx/CMakeLists.txt @@ -0,0 +1,32 @@ +cmake_minimum_required(VERSION 3.20) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT} C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} noos) diff --git a/examples/host/midi_rx/Makefile b/examples/host/midi_rx/Makefile new file mode 100644 index 000000000..0235e08c3 --- /dev/null +++ b/examples/host/midi_rx/Makefile @@ -0,0 +1,13 @@ +include ../../build_system/make/make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/main.c + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../build_system/make/rules.mk diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt new file mode 100644 index 000000000..b6f87f423 --- /dev/null +++ b/examples/host/midi_rx/only.txt @@ -0,0 +1,20 @@ +mcu:ESP32S2 +mcu:ESP32S3 +mcu:ESP32P4 +mcu:KINETIS_KL +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MAX3421 +mcu:MIMXRT1XXX +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:MSP432E4 +mcu:RP2040 +mcu:RX65X +mcu:RAXXX +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/midi_rx/src/main.c b/examples/host/midi_rx/src/main.c new file mode 100644 index 000000000..78b1a11b9 --- /dev/null +++ b/examples/host/midi_rx/src/main.c @@ -0,0 +1,123 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#include "bsp/board_api.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// STATIC GLOBALS DECLARATION +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTOTYPES +//--------------------------------------------------------------------+ +void led_blinking_task(void); +void midi_host_rx_task(void); + +/*------------- MAIN -------------*/ +int main(void) { + board_init(); + + printf("TinyUSB Host MIDI Example\r\n"); + + // init host stack on configured roothub port + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); + + while (1) { + tuh_task(); + led_blinking_task(); + midi_host_rx_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) { + const uint32_t interval_ms = 1000; + static uint32_t start_ms = 0; + + static bool led_state = false; + + // Blink every interval ms + if (board_millis() - start_ms < interval_ms) return;// not enough time + start_ms += interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state;// toggle +} + +//--------------------------------------------------------------------+ +// MIDI host receive task +//--------------------------------------------------------------------+ +void midi_host_rx_task(void) { + // nothing to do, we just print out received data in callback +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device with MIDI interface is mounted. +void tuh_midi_mount_cb(uint8_t idx, const tuh_midi_mount_cb_t* mount_cb_data) { + printf("MIDI Interface Index = %u, Address = %u, Number of RX cables = %u, Number of TX cables = %u\r\n", + idx, mount_cb_data->daddr, mount_cb_data->rx_cable_count, mount_cb_data->tx_cable_count); +} + +// Invoked when device with hid interface is un-mounted +void tuh_midi_umount_cb(uint8_t idx) { + printf("MIDI Interface Index = %u is unmounted\r\n", idx); +} + +void tuh_midi_rx_cb(uint8_t idx, uint32_t xferred_bytes) { + if (xferred_bytes == 0) { + return; + } + + uint8_t buffer[48]; + uint8_t cable_num = 0; + uint32_t bytes_read = tuh_midi_stream_read(idx, &cable_num, buffer, sizeof(buffer)); + + printf("Cable %u rx: ", cable_num); + for (uint32_t i = 0; i < bytes_read; i++) { + printf("%02X ", buffer[i]); + } + printf("\r\n"); +} + +void tuh_midi_tx_cb(uint8_t idx, uint32_t xferred_bytes) { + (void) idx; + (void) xferred_bytes; +} diff --git a/examples/host/midi_rx/src/tusb_config.h b/examples/host/midi_rx/src/tusb_config.h new file mode 100644 index 000000000..c9b430388 --- /dev/null +++ b/examples/host/midi_rx/src/tusb_config.h @@ -0,0 +1,118 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +// Espressif IDF requires "freertos/" prefix in include path +#if TUSB_MCU_VENDOR_ESPRESSIF +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// Driver Configuration +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 +// max device support (excluding hub device): 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) +#define CFG_TUH_MIDI CFG_TUH_DEVICE_MAX + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 1a57c7466..5ac75c04a 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/msc_file_explorer/CMakePresets.json b/examples/host/msc_file_explorer/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/msc_file_explorer/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index f6b6810f5..8197c3c8d 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -62,15 +62,13 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "msc_app.h" + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); -// from msc_app.c -extern bool msc_app_init(void); -extern void msc_app_task(void); - /*------------- MAIN -------------*/ int main(void) { board_init(); @@ -78,7 +76,11 @@ int main(void) { printf("TinyUSB Host MassStorage Explorer Example\r\n"); // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index ddd39c674..40a9ef57e 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -34,6 +34,8 @@ #define EMBEDDED_CLI_IMPL #include "embedded_cli.h" +#include "msc_app.h" + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION @@ -53,7 +55,11 @@ static CLI_UINT cli_buffer[BYTES_TO_CLI_UINTS(CLI_BUFFER_SIZE)]; static FATFS fatfs[CFG_TUH_DEVICE_MAX]; // for simplicity only support 1 LUN per device static volatile bool _disk_busy[CFG_TUH_DEVICE_MAX]; -static scsi_inquiry_resp_t inquiry_resp; +// define the buffer to be place in USB/DMA memory with correct alignment/cache line size +CFG_TUH_MEM_SECTION static struct { + TUH_EPBUF_TYPE_DEF(scsi_inquiry_resp_t, inquiry); +} scsi_resp; + //--------------------------------------------------------------------+ // @@ -63,7 +69,9 @@ bool cli_init(void); bool msc_app_init(void) { - for(size_t i=0; i<CFG_TUH_DEVICE_MAX; i++) _disk_busy[i] = false; + for(size_t i=0; i<CFG_TUH_DEVICE_MAX; i++) { + _disk_busy[i] = false; + } // disable stdout buffered for echoing typing command #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? @@ -77,7 +85,9 @@ bool msc_app_init(void) void msc_app_task(void) { - if (!_cli) return; + if (!_cli) { + return; + } int ch = board_getchar(); if ( ch > 0 ) @@ -95,8 +105,7 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ -bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; @@ -107,7 +116,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da } // Print out Vendor ID, Product ID and Rev - printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev); + printf("%.8s %.16s rev %.4s\r\n", scsi_resp.inquiry.vendor_id, scsi_resp.inquiry.product_id, scsi_resp.inquiry.product_rev); // Get capacity of device uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); @@ -145,7 +154,7 @@ void tuh_msc_mount_cb(uint8_t dev_addr) printf("A MassStorage device is mounted\r\n"); uint8_t const lun = 0; - tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0); + tuh_msc_inquiry(dev_addr, lun, &scsi_resp.inquiry, inquiry_complete_cb, 0); } void tuh_msc_umount_cb(uint8_t dev_addr) @@ -290,18 +299,11 @@ void cli_cmd_mkdir(EmbeddedCli *cli, char *args, void *context); void cli_cmd_mv(EmbeddedCli *cli, char *args, void *context); void cli_cmd_rm(EmbeddedCli *cli, char *args, void *context); -void cli_write_char(EmbeddedCli *cli, char c) -{ +static void cli_write_char(EmbeddedCli *cli, char c) { (void) cli; putchar((int) c); } -void cli_cmd_unknown(EmbeddedCli *cli, CliCommand *command) -{ - (void) cli; - printf("%s: command not found\r\n", command->name); -} - bool cli_init(void) { EmbeddedCliConfig *config = embeddedCliDefaultConfig(); diff --git a/examples/host/msc_file_explorer/src/msc_app.h b/examples/host/msc_file_explorer/src/msc_app.h new file mode 100644 index 000000000..3ba03d0dc --- /dev/null +++ b/examples/host/msc_file_explorer/src/msc_app.h @@ -0,0 +1,35 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef MSC_APP_H +#define MSC_APP_H + +#include <stdbool.h> + +bool msc_app_init(void); +void msc_app_task(void); + + +#endif diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index c798b4383..c1829c300 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/typec/CMakeLists.txt b/examples/typec/CMakeLists.txt index c7641494e..24c25908a 100644 --- a/examples/typec/CMakeLists.txt +++ b/examples/typec/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/typec/CMakePresets.json b/examples/typec/CMakePresets.json new file mode 100644 index 000000000..c22e8c0ec --- /dev/null +++ b/examples/typec/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/typec/power_delivery/CMakeLists.txt b/examples/typec/power_delivery/CMakeLists.txt index 012eff095..837b4996a 100644 --- a/examples/typec/power_delivery/CMakeLists.txt +++ b/examples/typec/power_delivery/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/typec/power_delivery/CMakePresets.json b/examples/typec/power_delivery/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/typec/power_delivery/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index 489d01aa1..068dbbeb1 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -71,7 +71,7 @@ int main(void) } } -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 +#if TUSB_MCU_VENDOR_ESPRESSIF void app_main(void) { main(); @@ -98,7 +98,7 @@ bool tuc_pd_data_received_cb(uint8_t rhport, pd_header_t const* header, uint8_t pd_pdo_fixed_t const* fixed = (pd_pdo_fixed_t const*) &pdo; uint32_t const voltage_mv = fixed->voltage_50mv*50; uint32_t const current_ma = fixed->current_max_10ma*10; - printf("[Fixed] %lu mV %lu mA\r\n", voltage_mv, current_ma); + printf("[Fixed] %"PRIu32" mV %"PRIu32" mA\r\n", voltage_mv, current_ma); if (voltage_mv <= VOLTAGE_MAX_MV && current_ma >= CURRENT_MAX_MA) { // Found a suitable PDO diff --git a/examples/west.yml b/examples/west.yml new file mode 100644 index 000000000..0683f6861 --- /dev/null +++ b/examples/west.yml @@ -0,0 +1,12 @@ +manifest: + remotes: + - name: zephyrproject-rtos + url-base: https://github.com/zephyrproject-rtos + projects: + - name: zephyr + remote: zephyrproject-rtos + revision: main + path: zephyr + import: true + self: + path: . |