arm: armv8: mmu: add mem_map_from_dram_banks

For armv8, U-Boot uses a static map defined as 'mem_map' for configuring
the MMU as part of mmu_setup.

But since the exact configuration of memory banks might not be known at
build time, many platforms such as imx9, versal2 etc. utilize
gd->bd->bi_dram to configure the static map at runtime.

Therefore this patch adds a new API mem_map_from_dram_banks that
modifies the static map in a similar way. Allowing the caller to map all
dram banks by just passing the index to last entry in their mem_map and
it's length.

Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
Tested-by: Wadim Egorov <[email protected]>

2 files changed, 39 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 74c78cb2fb0..9b3c37dae82 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -58,6 +58,34 @@ static int get_effective_el(void)
 	return el;
 }
 
+int mem_map_from_dram_banks(unsigned int index, unsigned int len, u64 attrs)
+{
+	unsigned int i;
+	int ret = fdtdec_setup_memory_banksize();
+
+	if (ret) {
+		log_err("%s: Failed to setup dram banks\n", __func__);
+		return ret;
+	}
+
+	if (index + CONFIG_NR_DRAM_BANKS >= len) {
+		log_err("%s: Provided mem_map array has insufficient size for DRAM entries\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		mem_map[index].virt = gd->bd->bi_dram[i].start;
+		mem_map[index].phys = gd->bd->bi_dram[i].start;
+		mem_map[index].size = gd->bd->bi_dram[i].size;
+		mem_map[index].attrs = attrs;
+		index++;
+	}
+
+	memset(&mem_map[index], 0, sizeof(mem_map[index]));
+
+	return 0;
+}
 u64 get_tcr(u64 *pips, u64 *pva_bits)
 {
 	int el = get_effective_el();
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index 3807c702fb6..6e7a3366844 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -194,8 +194,19 @@ struct mm_region {
 	u64 attrs;
 };
 
+/* Used as the memory map for MMU configuration by mmu_setup */
 extern struct mm_region *mem_map;
 void setup_pgtables(void);
+
+/**
+ * mem_map_from_dram_banks() - Populate mem_map with entries corresponding to
+ * dram banks as per the gd. This should be called prior to mmu_setup.
+ *
+ * @index: The entry in mem_map to start the over-write
+ * @len: The size of mem_map
+ */
+int mem_map_from_dram_banks(unsigned int index, unsigned int len, u64 attrs);
+
 u64 get_tcr(u64 *pips, u64 *pva_bits);
 
 /**