k210: use the board vendor name rather than the marketing name

"kendryte" is the marketing name for the K210 RISC-V SoC produced by
Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210"
vendor,SoC compatibility string format in the device tree files and
use the SoC name for file names.
With these changes, the device tree files are more in sync with the
Linux kernel DTS and drivers, making uboot device tree usable by the
kernel.

Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>

1 files changed, 6 insertions, 6 deletions

diff --git a/doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt b/doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
index 73871f59305..deca0cfab76 100644
--- a/doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
+++ b/doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
@@ -5,10 +5,10 @@ in Kendryte K210 SoCs. Any of the 256 functions can be mapped to any of the 48
 pins.
 
 Required properties:
-- compatible: should be "kendryte,k210-fpioa"
+- compatible: should be "canaan,k210-fpioa"
 - reg: address and length of the FPIOA registers
-- kendryte,sysctl: phandle to the "sysctl" register map node
-- kendryte,power-offset: offset in the register map of the power bank control
+- canaan,sysctl: phandle to the "sysctl" register map node
+- canaan,k210-power-offset: offset in the register map of the power bank control
   register (in bytes)
 
 Configuration nodes
@@ -54,10 +54,10 @@ Notes on specific properties include:
 
 Example:
 fpioa: pinmux@502B0000 {
-	compatible = "kendryte,k210-fpioa";
+	compatible = "canaan,k210-fpioa";
 	reg = <0x502B0000 0x100>;
-	kendryte,sysctl = <&sysctl>;
-	kendryte,power-offset = <K210_SYSCTL_POWER_SEL>;
+	canaan,k210-sysctl = <&sysctl>;
+	canaan,k210-power-offset = <K210_SYSCTL_POWER_SEL>;
 
 	/* JTAG running at 3.3V and driven at 11 mA */
 	fpioa_jtag: jtag {