Merge tag 'qcom-2024.04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon

Qualcomm architecture changes:

* Move clock and pinctrl drivers out of mach-snapdragon
* Various clock driver improvements
* Convert PMIC power/reset key driver to use the button API
* Preparetory work for migrating to upstream DT

3 files changed, 0 insertions, 168 deletions

diff --git a/doc/device-tree-bindings/gpio/pm8916_gpio.txt b/doc/device-tree-bindings/gpio/pm8916_gpio.txt
deleted file mode 100644
index 58185b83352..00000000000
--- a/doc/device-tree-bindings/gpio/pm8916_gpio.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Driver for part of pm8916 PMIC - gpio and power/reset keys
-
-This device should be child of SPMI pmic.
-
-1) GPIO driver
-
-Required properties:
-- compatible: "qcom,pm8916-gpio"
-- reg: peripheral ID, size of register block
-- gpio-controller
-- gpio-count: number of GPIOs
-- #gpio-cells: 2
-
-Optional properties:
-- gpio-bank-name: name of bank (as default "pm8916" is used)
-
-Example:
-
-pmic_gpios: gpios@c000 {
-	compatible = "qcom,pm8916-gpio";
-	reg = <0xc000 0x400>;
-	gpio-controller;
-	gpio-count = <4>;
-	#gpio-cells = <2>;
-	gpio-bank-name="pmic";
-};
-
-
-2) Power/Reset key driver
-
-Required properties:
-- compatible: "qcom,pm8916-pwrkey"
-- reg: peripheral ID, size of register block
-- gpio-controller
-- #gpio-cells: 2
-
-Optional properties:
-- gpio-bank-name: name of bank (as default "pm8916_key" is used)
-
-
-Example:
-
-pmic_pon: pon@800 {
-	compatible = "qcom,pm8916-pwrkey";
-	reg = <0x800 0x96>;
-	#gpio-cells = <2>;
-	gpio-controller;
-};
diff --git a/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt b/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
deleted file mode 100644
index eb78e3ae770..00000000000
--- a/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-          Qualcomm SPMI PMICs multi-function device bindings
-
-The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
-PMICs.  These PMICs use a QPNP scheme through SPMI interface.
-QPNP is effectively a partitioning scheme for dividing the SPMI extended
-register space up into logical pieces, and set of fixed register
-locations/definitions within these regions, with some of these regions
-specifically used for interrupt handling.
-
-The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
-interfaced to the chip via the SPMI (System Power Management Interface) bus.
-Support for multiple independent functions are implemented by splitting the
-16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
-each. A function can consume one or more of these fixed-size register regions.
-
-Required properties:
-- compatible:      Should contain one of:
-                   "qcom,pm660",
-                   "qcom,pm660l",
-                   "qcom,pm7325",
-                   "qcom,pm8004",
-                   "qcom,pm8005",
-                   "qcom,pm8019",
-                   "qcom,pm8028",
-                   "qcom,pm8110",
-                   "qcom,pm8150",
-                   "qcom,pm8150b",
-                   "qcom,pm8150c",
-                   "qcom,pm8150l",
-                   "qcom,pm8226",
-                   "qcom,pm8350c",
-                   "qcom,pm8841",
-                   "qcom,pm8901",
-                   "qcom,pm8909",
-                   "qcom,pm8916",
-                   "qcom,pm8941",
-                   "qcom,pm8950",
-                   "qcom,pm8953",
-                   "qcom,pm8994",
-                   "qcom,pm8998",
-                   "qcom,pma8084",
-                   "qcom,pmd9635",
-                   "qcom,pmi8950",
-                   "qcom,pmi8962",
-                   "qcom,pmi8994",
-                   "qcom,pmi8998",
-                   "qcom,pmk8002",
-                   "qcom,pmk8350",
-                   "qcom,pmr735a",
-                   "qcom,smb2351",
-                   or generalized "qcom,spmi-pmic".
-- reg:             Specifies the SPMI USID slave address for this device.
-                   For more information see:
-                   Documentation/devicetree/bindings/spmi/spmi.yaml
-
-Required properties for peripheral child nodes:
-- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
-
-Optional properties for peripheral child nodes:
-- interrupts:      Interrupts are specified as a 4-tuple. For more information
-                   see:
-                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
-- interrupt-names: Corresponding interrupt name to the interrupts property
-
-Each child node of SPMI slave id represents a function of the PMIC. In the
-example below the rtc device node represents a peripheral of pm8941
-SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-
-		pm8941@0 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x0 SPMI_USID>;
-
-			rtc {
-				compatible = "qcom,rtc";
-				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "alarm";
-			};
-		};
-
-		pm8941@1 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x1 SPMI_USID>;
-
-			regulator {
-				compatible = "qcom,regulator";
-				regulator-name = "8941_boost";
-			};
-		};
-	};
diff --git a/doc/device-tree-bindings/spmi/spmi-msm.txt b/doc/device-tree-bindings/spmi/spmi-msm.txt
deleted file mode 100644
index ae47673b768..00000000000
--- a/doc/device-tree-bindings/spmi/spmi-msm.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Qualcomm SPMI arbiter/bus driver
-
-This is bus driver for Qualcomm chips that use SPMI to communicate with PMICs.
-
-Required properties:
-- compatible: "qcom,spmi-pmic-arb"
-- reg: Register block adresses and sizes for various parts of device:
-   1) PMIC arbiter channel mapping base (PMIC_ARB_REG_CHNLn)
-   2) SPMI write command (master) registers (PMIC_ARB_CORE_SW_DEC_CHANNELS)
-   3) SPMI read command (observer) registers (PMIC_ARB_CORE_REGISTERS_OBS)
-
-Optional properties (if not set by parent):
-- #address-cells: 0x1 - childs slave ID address
-- #size-cells: 0x1
-
-All PMICs should be placed as a child nodes of bus arbiter.
-Automatic detection of childs is currently not supported.
-
-Example:
-
-spmi@200f000 {
-	compatible = "qcom,spmi-pmic-arb";
-	reg = <0x200f800 0x200 0x2400000 0x400000 0x2c00000 0x400000>;
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-};