diff options
Diffstat (limited to 'arch')
30 files changed, 121 insertions, 59 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 25f4a15b19f..507ebf75f05 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -351,6 +351,63 @@ config SYS_DISABLE_DCACHE_OPS Note that, its up to the individual architectures to implement this functionality. +config SKIP_LOWLEVEL_INIT + bool "Skip the calls to certain low level initialization functions" + depends on ARM || NDS32 || MIPS || RISCV + help + If enabled, then certain low level initializations (like setting up + the memory controller) are omitted and/or U-Boot does not relocate + itself into RAM. + Normally this variable MUST NOT be defined. The only exception is + when U-Boot is loaded (to RAM) by some other boot loader or by a + debugger which performs these initializations itself. + +config SPL_SKIP_LOWLEVEL_INIT + bool "Skip the calls to certain low level initialization functions" + depends on SPL && (ARM || NDS32 || MIPS || RISCV) + help + If enabled, then certain low level initializations (like setting up + the memory controller) are omitted and/or U-Boot does not relocate + itself into RAM. + Normally this variable MUST NOT be defined. The only exception is + when U-Boot is loaded (to RAM) by some other boot loader or by a + debugger which performs these initializations itself. + +config TPL_SKIP_LOWLEVEL_INIT + bool "Skip the calls to certain low level initialization functions" + depends on SPL && ARM + help + If enabled, then certain low level initializations (like setting up + the memory controller) are omitted and/or U-Boot does not relocate + itself into RAM. + Normally this variable MUST NOT be defined. The only exception is + when U-Boot is loaded (to RAM) by some other boot loader or by a + debugger which performs these initializations itself. + +config SKIP_LOWLEVEL_INIT_ONLY + bool "Skip the call to lowlevel_init during early boot ONLY" + depends on ARM + help + This allows just the call to lowlevel_init() to be skipped. The + normal CP15 init (such as enabling the instruction cache) is still + performed. + +config SPL_SKIP_LOWLEVEL_INIT_ONLY + bool "Skip the call to lowlevel_init during early boot ONLY" + depends on SPL && ARM + help + This allows just the call to lowlevel_init() to be skipped. The + normal CP15 init (such as enabling the instruction cache) is still + performed. + +config TPL_SKIP_LOWLEVEL_INIT_ONLY + bool "Skip the call to lowlevel_init during early boot ONLY" + depends on TPL && ARM + help + This allows just the call to lowlevel_init() to be skipped. The + normal CP15 init (such as enabling the instruction cache) is still + performed. + source "arch/arc/Kconfig" source "arch/arm/Kconfig" source "arch/m68k/Kconfig" diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index da7278e59fa..4bc27f63736 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -39,7 +39,7 @@ reset: msr cpsr,r0 /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) bl cpu_init_crit #endif @@ -62,7 +62,7 @@ c_runtime_cpu_setup: * ************************************************************************* */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) cpu_init_crit: /* * flush v4 I/D caches @@ -81,7 +81,7 @@ cpu_init_crit: orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache mcr p15, 0, r0, c1, c0, 0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /* * Jump to board specific initialization... The Mask ROM will have already initialized * basic memory. Go here to bump up clock rate and handle wake up conditions. @@ -91,4 +91,4 @@ cpu_init_crit: mov lr, ip /* restore link */ #endif mov pc, lr /* back to my caller */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index ecb4e44fd8d..9ad1f031429 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -37,8 +37,8 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \ - !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \ + !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) bl cpu_init_crit #endif @@ -62,8 +62,8 @@ c_runtime_cpu_setup: ************************************************************************* */ -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \ - !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \ + !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) cpu_init_crit: mov ip, lr @@ -76,4 +76,4 @@ cpu_init_crit: mov lr, ip mov pc, lr -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index e2b5f2bff4a..02cbda9d224 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -53,7 +53,7 @@ copyex: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) bl cpu_init_crit #endif @@ -78,7 +78,7 @@ c_runtime_cpu_setup: */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) cpu_init_crit: /* * flush v4 I/D caches @@ -97,7 +97,7 @@ cpu_init_crit: orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache mcr p15, 0, r0, c1, c0, 0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will @@ -109,4 +109,4 @@ cpu_init_crit: mov lr, ip #endif mov pc, lr -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index ff592ba8101..0afcc47aad7 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -46,7 +46,7 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) bl cpu_init_crit #endif @@ -69,7 +69,7 @@ c_runtime_cpu_setup: * ************************************************************************* */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) cpu_init_crit: /* * flush D cache before disabling it @@ -100,7 +100,7 @@ flush_dcache: #endif mcr p15, 0, r0, c1, c0, 0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /* * Go setup Memory and board specific bits prior to relocation. */ @@ -109,4 +109,4 @@ flush_dcache: mov lr, r4 /* restore link */ #endif mov pc, lr /* back to my caller */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 0ec340b1a6e..2d5186774a7 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -45,7 +45,7 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) bl cpu_init_crit #endif @@ -70,7 +70,7 @@ c_runtime_cpu_setup: */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) cpu_init_crit: /* * flush v4 I/D caches @@ -89,7 +89,7 @@ cpu_init_crit: orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ mcr p15, 0, r0, c1, c0, 0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /* * Go setup Memory and board specific bits prior to relocation. */ diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 0e83e394d52..bfbd85ae64e 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_EFI_LOADER) += sctlr.o obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o endif -ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) +ifneq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),y) obj-y += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index dcb4195d7b4..87329d26e10 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -80,11 +80,11 @@ switch_to_hypervisor_ret: #endif /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) #ifdef CONFIG_CPU_V7A bl cpu_init_cp15 #endif -#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) bl cpu_init_crit #endif #endif @@ -320,8 +320,8 @@ skip_errata_801819: mov pc, r5 @ back to my caller ENDPROC(cpu_init_cp15) -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \ - !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \ + !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /************************************************************************* * * CPU_init_critical registers diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 9ca61b3f59e..b10b56d2d30 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -5,6 +5,7 @@ config ARCH_LS1012A select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 + select SKIP_LOWLEVEL_INIT select SYS_FSL_SRDS_1 select SYS_HAS_SERDES select SYS_FSL_DDR_BE @@ -62,6 +63,7 @@ config ARCH_LS1043A select FSL_LSCH2 select GICV2 select HAS_FSL_XHCI_USB if USB_HOST + select SKIP_LOWLEVEL_INIT select SYS_FSL_SRDS_1 select SYS_HAS_SERDES select SYS_FSL_DDR @@ -96,6 +98,7 @@ config ARCH_LS1046A select FSL_LSCH2 select GICV2 select HAS_FSL_XHCI_USB if USB_HOST + select SKIP_LOWLEVEL_INIT select SYS_FSL_SRDS_1 select SYS_HAS_SERDES select SYS_FSL_DDR @@ -134,6 +137,7 @@ config ARCH_LS1088A select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 + select SKIP_LOWLEVEL_INIT select SYS_FSL_SRDS_1 select SYS_HAS_SERDES select SYS_FSL_DDR @@ -181,6 +185,7 @@ config ARCH_LS2080A select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 + select SKIP_LOWLEVEL_INIT select SYS_FSL_SRDS_1 select SYS_HAS_SERDES select SYS_FSL_DDR @@ -296,6 +301,7 @@ config ARCH_LX2160A config FSL_LSCH2 bool + select SKIP_LOWLEVEL_INIT select SYS_FSL_HAS_CCI400 select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_5 diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 575abac09c2..896e05f1fda 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -45,7 +45,7 @@ reset: orr r0,r0,#0xd3 msr cpsr,r0 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) bl cpu_init_crit #endif @@ -92,7 +92,7 @@ c_runtime_cpu_setup: * ************************************************************************* */ -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X) cpu_init_crit: /* * flush v4 I/D caches @@ -111,7 +111,7 @@ cpu_init_crit: mcr p15, 0, r0, c1, c0, 0 mov pc, lr /* back to my caller */ -#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */ +#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || CONFIG_CPU_PXA25X */ /* * Enable MMU to use DCache as DRAM. diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 8eb005309e0..2f84f20575c 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -39,7 +39,7 @@ reset: * we do sys-critical inits only at reboot, * not when booting from ram! */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) bl cpu_init_crit #endif @@ -95,7 +95,7 @@ cpu_init_crit: ldr r1, cpuspeed str r1, [r0, #PPCR] -#ifndef CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will diff --git a/arch/arm/include/asm/arch-am33xx/chilisom.h b/arch/arm/include/asm/arch-am33xx/chilisom.h index 493be643116..e423c9d071f 100644 --- a/arch/arm/include/asm/arch-am33xx/chilisom.h +++ b/arch/arm/include/asm/arch-am33xx/chilisom.h @@ -6,7 +6,7 @@ #ifndef __ARCH_ARM_MACH_CHILISOM_SOM_H__ #define __ARCH_ARM_MACH_CHILISOM_SOM_H__ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) void chilisom_enable_pin_mux(void); void chilisom_spl_board_init(void); #endif diff --git a/arch/arm/mach-at91/arm920t/lowlevel_init.S b/arch/arm/mach-at91/arm920t/lowlevel_init.S index de99c616ac8..5e3cce03b7e 100644 --- a/arch/arm/mach-at91/arm920t/lowlevel_init.S +++ b/arch/arm/mach-at91/arm920t/lowlevel_init.S @@ -10,7 +10,7 @@ #include <config.h> -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) #include <asm/arch/hardware.h> #include <asm/arch/at91_mc.h> @@ -148,4 +148,4 @@ SMRDATA1: .word CONFIG_SYS_SDRAM_VAL SMRDATA1E: /* SMRDATA1 is 176 bytes long */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index fda25ba66a3..6f9a30bb5f4 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -224,7 +224,7 @@ const struct rproc_att hostmap[] = { }; #endif -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) /* enable all periherial can be accessed in nosec mode */ static void init_csu(void) { diff --git a/arch/arm/mach-imx/syscounter.c b/arch/arm/mach-imx/syscounter.c index 6dfed365d29..7c02e199a38 100644 --- a/arch/arm/mach-imx/syscounter.c +++ b/arch/arm/mach-imx/syscounter.c @@ -59,7 +59,7 @@ static inline unsigned long long us_to_tick(unsigned long long usec) return usec; } -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) int timer_init(void) { struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR; diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 80d0a85ec1c..6ecd394a533 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -27,10 +27,6 @@ #define CONFIG_SYS_L2_PL310 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#endif - /* * By default the generated mvebu kwbimage.cfg is used * If for some board, different configuration file need to be used, diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 08639653b79..dfb63df9a19 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -120,6 +120,7 @@ config AM33XX select SPECIFY_CONSOLE_INDEX imply NAND_OMAP_ELM imply NAND_OMAP_GPMC + imply SKIP_LOWLEVEL_INIT imply SPL_NAND_AM33XX_BCH imply SPL_NAND_SUPPORT imply SYS_I2C_OMAP24XX diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile index 61c76d045f3..4e4f98ea903 100644 --- a/arch/arm/mach-omap2/am33xx/Makefile +++ b/arch/arm/mach-omap2/am33xx/Makefile @@ -13,7 +13,7 @@ endif obj-$(CONFIG_TI816X) += clock_ti816x.o obj-y += sys_info.o obj-y += ddr.o -ifeq ($(CONFIG_TI816X)$(CONFIG_SKIP_LOWLEVEL_INIT),) +ifeq ($(CONFIG_TI816X)$(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),) obj-y += emif4.o endif obj-$(CONFIG_TI816X) += ti816x_emif4.o diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index d390f2e1f3e..c44667668e9 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -65,7 +65,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) sdram_init(); #endif @@ -351,7 +351,7 @@ int arch_misc_init(void) #endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)) @@ -599,7 +599,7 @@ void board_init_f(ulong dummy) int arch_cpu_init_dm(void) { hw_data_init(); -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) early_system_init(); #endif return 0; diff --git a/arch/arm/mach-omap2/am33xx/chilisom.c b/arch/arm/mach-omap2/am33xx/chilisom.c index 15b6b35ae7c..459bac13e05 100644 --- a/arch/arm/mach-omap2/am33xx/chilisom.c +++ b/arch/arm/mach-omap2/am33xx/chilisom.c @@ -22,7 +22,7 @@ #include <power/tps65217.h> #include <spl.h> -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; @@ -182,4 +182,4 @@ void sdram_init(void) &ddr3_chilisom_emif_reg_data, 0); } -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c index 363af528450..8b70251457e 100644 --- a/arch/arm/mach-omap2/omap3/board.c +++ b/arch/arm/mach-omap2/omap3/board.c @@ -76,8 +76,8 @@ void early_system_init(void) hw_data_init(); } -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \ - !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \ + !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) /****************************************************************************** * Routine: secure_unlock diff --git a/arch/arm/mach-omap2/omap3/lowlevel_init.S b/arch/arm/mach-omap2/omap3/lowlevel_init.S index 4fa89418a11..ab7cdcf3d42 100644 --- a/arch/arm/mach-omap2/omap3/lowlevel_init.S +++ b/arch/arm/mach-omap2/omap3/lowlevel_init.S @@ -170,8 +170,8 @@ pll_div_val5: go_to_speed_end: #endif -#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \ - !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) && \ + !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY) ENTRY(lowlevel_init) ldr sp, SRAM_STACK str ip, [sp] /* stash ip register */ diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 606153e407c..a8b87f6d710 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -11,7 +11,7 @@ obj-y = cpu.o obj-y += dram.o obj-y += timer.o -ifndef CONFIG_SKIP_LOWLEVEL_INIT +ifndef CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT obj-y += lowlevel_init.o endif diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index b164afb5290..d617c4bc89c 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -100,6 +100,7 @@ config ROCKCHIP_RK3288 bool "Support Rockchip RK3288" select CPU_V7A select OF_BOARD_SETUP + select SKIP_LOWLEVEL_INIT_ONLY select SUPPORT_SPL select SPL select SUPPORT_TPL diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 311266400df..6998a500453 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -72,6 +72,7 @@ config TEGRA_ARMV7_COMMON select CPU_V7A select SPL select SPL_BOARD_INIT if SPL + select SPL_SKIP_LOWLEVEL_INIT_ONLY if SPL select SUPPORT_SPL select TEGRA_CLKRST select TEGRA_COMMON diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index 335aafa6a8d..47251a5b92a 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -233,7 +233,7 @@ wr_done: # endif #endif -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) # ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD /* Initialize any external memory */ PTR_LA t9, lowlevel_init @@ -254,7 +254,7 @@ wr_done: nop #endif -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) # ifndef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD /* Initialize any external memory */ PTR_LA t9, lowlevel_init diff --git a/arch/mips/mach-mtmips/mt7628/lowlevel_init.S b/arch/mips/mach-mtmips/mt7628/lowlevel_init.S index e4a6c035808..83cd8fa9b6b 100644 --- a/arch/mips/mach-mtmips/mt7628/lowlevel_init.S +++ b/arch/mips/mach-mtmips/mt7628/lowlevel_init.S @@ -28,7 +28,7 @@ .set noreorder LEAF(mips_sram_init) -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) /* Setup CPU PLL */ li t0, DELAY_USEC(1000000) li t1, KSEG1ADDR(SYSCTL_BASE + SYSCTL_ROM_STATUS_REG) @@ -116,7 +116,7 @@ _cpu_pll_done: sub a1, CONFIG_SYS_DCACHE_LINE_SIZE bnez a1, 3b nop -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ jr ra nop diff --git a/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S b/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S index 507d79e77b8..25ec185d69d 100644 --- a/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S +++ b/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S @@ -94,7 +94,7 @@ mem_init: move $lp, $r11 ret -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) .globl lowlevel_init lowlevel_init: move $r10, $lp @@ -144,4 +144,4 @@ enable_fpu: ret #endif -#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S index 73f1f52056a..ce5fefda765 100644 --- a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S +++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S @@ -164,7 +164,7 @@ sdram_b0_cr: ret -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) .globl lowlevel_init lowlevel_init: @@ -314,4 +314,4 @@ show_led: li $r8, (CONFIG_DEBUG_LED) swi $r7, [$r8] ret -#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */ +#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S index 3395721552a..f02508f04f6 100644 --- a/arch/nds32/cpu/n1213/start.S +++ b/arch/nds32/cpu/n1213/start.S @@ -174,7 +174,7 @@ set_ivb: jal mem_init -#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) jal lowlevel_init /* * gp = ~VMA for burn mode |