summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/aquila-imx95.h28
-rw-r--r--include/configs/bananapi-f3.h13
-rw-r--r--include/configs/evb_ast2700.h58
-rw-r--r--include/configs/k1.h20
-rw-r--r--include/configs/ls1028ardb.h99
-rw-r--r--include/configs/mt7987.h14
-rw-r--r--include/configs/mt7988.h14
-rw-r--r--include/configs/mx6sabre_common.h122
-rw-r--r--include/configs/mx6sabreauto.h1
-rw-r--r--include/configs/mx6sabresd.h1
-rw-r--r--include/configs/mx6ullevk.h73
-rw-r--r--include/configs/mx7ulp_evk.h63
12 files changed, 126 insertions, 380 deletions
diff --git a/include/configs/aquila-imx95.h b/include/configs/aquila-imx95.h
new file mode 100644
index 00000000000..07d09d138cb
--- /dev/null
+++ b/include/configs/aquila-imx95.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (c) Toradex */
+
+#ifndef __AQUILA_IMX95_H
+#define __AQUILA_IMX95_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#define CFG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+/* module has 8GB, 2GB from 0x80000000..0xffffffff, 6GB above */
+#define SZ_6G _AC(0x180000000, ULL)
+
+/* first 256MB reserved for firmware */
+#define CFG_SYS_INIT_RAM_ADDR 0x90000000
+#define CFG_SYS_INIT_RAM_SIZE SZ_2M
+
+#define CFG_SYS_SDRAM_BASE 0x90000000
+#define PHYS_SDRAM 0x90000000
+#define PHYS_SDRAM_SIZE (SZ_2G - SZ_256M)
+#define PHYS_SDRAM_2_SIZE SZ_6G
+
+#define CFG_SYS_SECURE_SDRAM_BASE 0x8A000000 /* Secure DDR region for A55, SPL could use first 2MB */
+#define CFG_SYS_SECURE_SDRAM_SIZE 0x06000000
+
+#endif
diff --git a/include/configs/bananapi-f3.h b/include/configs/bananapi-f3.h
deleted file mode 100644
index 97cf4d72df0..00000000000
--- a/include/configs/bananapi-f3.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2024, Kongyang Liu <[email protected]>
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CFG_SYS_SDRAM_BASE 0x0
-#define CFG_SYS_NS16550_IER 0x40 /* UART Unit Enable */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/evb_ast2700.h b/include/configs/evb_ast2700.h
new file mode 100644
index 00000000000..6b73eddc1af
--- /dev/null
+++ b/include/configs/evb_ast2700.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/aspeed-common.h>
+
+/* Extra ENV for Boot Command */
+#define STR_HELPER(n) #n
+#define STR(n) STR_HELPER(n)
+
+#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
+
+#define CFG_EXTRA_ENV_SETTINGS \
+ "bootspi=fdt addr ${fdtspiaddr} && " \
+ "fdt header get fitsize totalsize && " \
+ "cp.b ${fdtspiaddr} ${loadaddr} ${fitsize} && " \
+ "bootm ${loadaddr}; " \
+ "echo Error loading kernel FIT image\0" \
+ "loadaddr=" STR(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "bootside=a\0" \
+ "rootfs=rofs-a\0" \
+ "setmmcargs=setenv bootargs ${bootargs} " \
+ "rootwait root=PARTLABEL=${rootfs}\0" \
+ "boota=setenv bootpart 2; setenv rootfs rofs-a; " \
+ "run setmmcargs; " \
+ "ext4load mmc 0:${bootpart} ${loadaddr} fitImage && " \
+ "bootm ${loadaddr}; " \
+ "echo Error loading kernel FIT image\0" \
+ "bootb=setenv bootpart 3; setenv rootfs rofs-b; " \
+ "run setmmcargs; " \
+ "ext4load mmc 0:${bootpart} ${loadaddr} fitImage && " \
+ "bootm ${loadaddr}; " \
+ "echo Error loading kernel FIT image\0" \
+ "bootmmc=if test \"${bootside}\" = \"b\"; " \
+ "then run bootb; run boota; " \
+ "else run boota; run bootb; fi\0" \
+ "setufsargs=setenv bootargs ${bootargs} " \
+ "rootwait root=PARTLABEL=${rootfs}\0" \
+ "ufsboota=setenv bootpart 2; setenv rootfs rofs-a; " \
+ "run setufsargs; " \
+ "ext4load scsi 0:${bootpart} ${loadaddr} fitImage && " \
+ "bootm ${loadaddr}; " \
+ "echo Error loading kernel FIT image\0" \
+ "ufsbootb=setenv bootpart 3; setenv rootfs rofs-b; " \
+ "run setufsargs; " \
+ "ext4load scsi 0:${bootpart} ${loadaddr} fitImage && " \
+ "bootm ${loadaddr}; " \
+ "echo Error loading kernel FIT image\0" \
+ "bootufs=if test \"${bootside}\" = \"b\"; " \
+ "then run ufsbootb; run ufsboota; " \
+ "else run ufsboota; run ufsbootb; fi\0" \
+ "verify=no\0" \
+ ""
+#endif /* __CONFIG_H */
diff --git a/include/configs/k1.h b/include/configs/k1.h
new file mode 100644
index 00000000000..e09c3594905
--- /dev/null
+++ b/include/configs/k1.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2024, Kongyang Liu <[email protected]>
+ * Copyright (C) 2025-2026, RISCstar Ltd.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CFG_SYS_NS16550_CLK 14700000
+#define CFG_SYS_NS16550_IER 0x40 /* UART Unit Enable */
+#define CFG_SYS_SDRAM_BASE 0x0
+
+#define RISCV_MMODE_TIMERBASE 0xe4000000
+#define RISCV_MMODE_TIMEROFF 0xbff8
+#define RISCV_MMODE_TIMER_FREQ 24000000
+#define RISCV_SMODE_TIMER_FREQ 24000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 613abc50567..1811825baeb 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -50,85 +50,26 @@
/* Initial environment variables */
#ifndef SPL_NO_ENV
#undef CFG_EXTRA_ENV_SETTINGS
-#define CFG_EXTRA_ENV_SETTINGS \
- "board=ls1028ardb\0" \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "fdtfile=fsl-ls1028a-rdb.dtb\0" \
- "image=Image\0" \
- "extra_bootargs=iommu.passthrough=1 arm-smmu.disable_bypass=0\0" \
- "othbootargs=video=1920x1080-32@60 cma=640M\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "bootm_size=0x10000000\0" \
- "kernel_addr=0x01000000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_addr_r=0x81000000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "kernel_start=0x1000000\0" \
- "kernelheader_start=0x600000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernelheader_size=0x40000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x3000\0" \
- "kernelhdr_size_sd=0x20\0" \
- "console=ttyS0,115200\0" \
- "console_dbg=earlycon=uart8250,mmio,0x21c0500\0" \
- BOOTENV \
- "boot_scripts=ls1028ardb_boot.scr\0" \
- "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
+#define CFG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ "boot_scripts=ls1028ardb_boot.scr\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
- "sf probe 0:0 && sf read $load_addr " \
- "$kernel_start $kernel_size ; env exists secureboot &&" \
- "sf read $kernelheader_addr_r $kernelheader_start " \
- "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
- " bootm $load_addr#$board\0" \
- "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
- "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
- "&& hdp load $load_addr 0x2000\0" \
- "sd_bootcmd=echo Trying load from SD ...;" \
- "mmc dev 0;mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
- "mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
- "&& hdp load $load_addr 0x2000\0" \
- "emmc_bootcmd=echo Trying load from EMMC ..;" \
- "mmc dev 1;mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
- "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
- "&& hdp load $load_addr 0x2000\0"
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0"
#endif
#endif /* __LS1028A_RDB_H */
diff --git a/include/configs/mt7987.h b/include/configs/mt7987.h
deleted file mode 100644
index 18ed3c7a55b..00000000000
--- a/include/configs/mt7987.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Configuration for MediaTek MT7987 SoC
- *
- * Copyright (C) 2025 MediaTek Inc.
- * Author: Sam Shih <[email protected]>
- */
-
-#ifndef __MT7987_H
-#define __MT7987_H
-
-#define CFG_MAX_MEM_MAPPED 0xC0000000
-
-#endif
diff --git a/include/configs/mt7988.h b/include/configs/mt7988.h
deleted file mode 100644
index e63825a5a19..00000000000
--- a/include/configs/mt7988.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Configuration for MediaTek MT7988 SoC
- *
- * Copyright (C) 2022 MediaTek Inc.
- * Author: Sam Shih <[email protected]>
- */
-
-#ifndef __MT7988_H
-#define __MT7988_H
-
-#define CFG_MAX_MEM_MAPPED 0xC0000000
-
-#endif
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index ef2848b71f3..d3a57a10a16 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -8,133 +8,11 @@
#ifndef __MX6QSABRE_COMMON_CONFIG_H
#define __MX6QSABRE_COMMON_CONFIG_H
-#include <linux/stringify.h>
-
#include "mx6_common.h"
/* MMC Configs */
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
-#define EMMC_ENV \
- "emmcdev=2\0" \
- "update_emmc_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "if mmc dev ${emmcdev} 1; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0"
-#else
-#define EMMC_ENV ""
-#endif
-
-#define CFG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "fdtfile=undefined\0" \
- "fdt_addr=0x18000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "console=" CONSOLE_DEV "\0" \
- "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
- "dfu_alt_info_spl=spl raw 0x400\0" \
- "dfu_alt_info_img=u-boot raw 0x10000\0" \
- "dfu_alt_info=spl raw 0x400\0" \
- "initrd_high=0xffffffff\0" \
- "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "mmcdev=" __stringify(CONFIG_ENV_MMC_DEVICE_INDEX) "\0" \
- "mmcpart=1\0" \
- "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
- "update_sd_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if mmc dev ${mmcdev}; then " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0" \
- EMMC_ENV \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=PARTUUID=${uuid} rootwait rw\0" \
- "loadbootscript=" \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || " \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || " \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \
- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || " \
- "load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run finduuid; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "findfdt="\
- "if test $fdtfile = undefined; then " \
- "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
- "setenv fdtfile imx6qp-sabreauto.dtb; fi; " \
- "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
- "setenv fdtfile imx6q-sabreauto.dtb; fi; " \
- "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
- "setenv fdtfile imx6dl-sabreauto.dtb; fi; " \
- "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
- "setenv fdtfile imx6qp-sabresd.dtb; fi; " \
- "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
- "setenv fdtfile imx6q-sabresd.dtb; fi; " \
- "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
- "setenv fdtfile imx6dl-sabresd.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
- "echo WARNING: Could not determine dtb to use; fi; " \
- "fi;\0" \
-
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index e491af3e927..b5602def87d 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -9,7 +9,6 @@
#define __MX6SABREAUTO_CONFIG_H
#define CFG_MXC_UART_BASE UART4_BASE
-#define CONSOLE_DEV "ttymxc3"
#define CFG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index e34947c94d0..1ea08f835dd 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -9,7 +9,6 @@
#define __MX6SABRESD_CONFIG_H
#define CFG_MXC_UART_BASE UART1_BASE
-#define CONSOLE_DEV "ttymxc0"
#include "mx6sabre_common.h"
diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
index 88b535e1bd0..a535163fd19 100644
--- a/include/configs/mx6ullevk.h
+++ b/include/configs/mx6ullevk.h
@@ -9,7 +9,6 @@
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
-#include <linux/stringify.h>
#include "mx6_common.h"
#include <asm/mach-imx/gpio.h>
@@ -23,78 +22,6 @@
#define CFG_SYS_FSL_USDHC_NUM 2
#endif
-#define CFG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttymxc0\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_file=undefined\0" \
- "fdt_addr=0x83000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
- "mmcdev="__stringify(CONFIG_ENV_MMC_DEVICE_INDEX)"\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "findfdt="\
- "if test $fdt_file = undefined; then " \
- "if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \
- "setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \
- "if test $board_name = EVK && test $board_rev = 14X14; then " \
- "setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \
- "if test $fdt_file = undefined; then " \
- "echo WARNING: Could not determine dtb to use; " \
- "fi; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
-
/* Miscellaneous configurable options */
/* Physical Memory Map */
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index 21dbec837f0..f36265f13e6 100644
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -24,69 +24,6 @@
#define PHYS_SDRAM_SIZE SZ_1G
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CFG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttyLP0\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_file=imx7ulp-evk.dtb\0" \
- "fdt_addr=0x63000000\0" \
- "boot_fdt=try\0" \
- "earlycon=lpuart32,0x402D0010\0" \
- "ip_dyn=yes\0" \
- "mmcdev="__stringify(CONFIG_ENV_MMC_DEVICE_INDEX)"\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=:::::eth0:dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "usb start; "\
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
-
#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CFG_SYS_INIT_RAM_SIZE SZ_256K
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-28 07:29:51 +0000