summaryrefslogtreecommitdiff
path: root/arch/arm/include
AgeCommit message (Collapse)Author
2021-01-25sunxi: Introduce common symbol for H6 like SoCsJernej Skrabec
It turns out that there are at least 2 other SoCs which have basically the same memory map, similar clocks and other features as H6. It's very likely that we'll see more such SoCs in the future. In order to ease porting to new SoCs and lower ifdef clutter, introduce common symbol for them. Signed-off-by: Jernej Skrabec <[email protected]> Reviewed-by: Samuel Holland <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Andre Przywara <[email protected]>
2021-01-23spi: imx: Define register bits in the driverMarek Vasut
The CSPI/ECSPI register bits do not differ between newer SoCs, instead of having multiple copies of the same thing for each iMX SoC, define the bits in the driver. Signed-off-by: Marek Vasut <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Stefano Babic <[email protected]>
2021-01-23imx8m: clock: add type of set_clk_eqosPeng Fan
Add type of set_clk_eqos to make it could be used by other files. Signed-off-by: Peng Fan <[email protected]>
2021-01-23imx: imx8mp_evk: enable eth supportPeng Fan
Add board code to configure the network interface Add net defconfig Signed-off-by: Peng Fan <[email protected]>
2021-01-18aspeed: Add AST2600 platform supportChia-Wei, Wang
Add low level platform initialization for the AST2600 SoC. The 2-stage booting with U-Boot SPL are leveraged to support different booting mode. However, currently the patch supports only the booting from memory-mapped SPI flash. Signed-off-by: Chia-Wei, Wang <[email protected]> Reviewed-by: Ryan Chen <[email protected]>
2021-01-18wdt: aspeed: Add AST2600 watchdog supportChia-Wei, Wang
AST2600 has 8 watchdog timers including 8 sets of 32-bit decrement counters, based on 1MHz clock. A 64-bit reset mask is also supported to specify which controllers should be reset by the WDT reset. Signed-off-by: Chia-Wei, Wang <[email protected]> Reviewed-by: Ryan Chen <[email protected]>
2021-01-18ram: aspeed: Add AST2600 DRAM control supportDylan Hung
AST2600 supports DDR4 SDRAM with maximum speed DDR4-1600. The DDR4 DRAM types including 128MbX16 (2Gb), 256MbX16 (4Gb), 512MbX16 (8Gb), 1GbX16 (16Gb), and 1GbX8 TwinDie (16Gb) are supported. Signed-off-by: Dylan Hung <[email protected]> Signed-off-by: Chia-Wei, Wang <[email protected]> Reviewed-by: Ryan Chen <[email protected]>
2021-01-18clk: aspeed: Add AST2600 clock supportRyan Chen
This patch adds the clock control driver for the AST2600 SoC. Signed-off-by: Ryan Chen <[email protected]> Signed-off-by: Chia-Wei, Wang <[email protected]>
2021-01-18acpi: Add missing ARM acpi_table headerHarm Berntsen
The pci_mmc.c driver can generate ACPI info and therefore includes asm/acpi_table.h by proxy. This file does not exist for the ARM architecture and thus code compilation failed when using this driver on ARM. Signed-off-by: Harm Berntsen <[email protected]> CC: Simon Glass <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-01-18gpio: do not include <asm/arch/gpio.h> on ARCH_QEMUHarm Berntsen
As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for QEMU. Signed-off-by: Harm Berntsen <[email protected]>
2021-01-15common: board_r: Drop initr_noncached wrapperOvidiu Panait
Add a return value to noncached_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-01-13Merge tag 'u-boot-amlogic-20210112' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync amlogic GX & AXG DT to Linux 5.10 - Add new MESON_EE driver support for GXBB & AXG - Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards - add driver for TDO tl070wsh30 panel driver - meson: isolate loading of socinfo - Add soc_rev to environment - Enable G12A support for saradc - Add correct mmcdev on VIM3(L) & Odroid-N2(C4) - Read MAC from fuses for VIM3 & VIM3L boards
2021-01-12Merge tag 'ti-v2021.04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - DM support for OMAP PWM backlight - USB host mode support for AM654 - Minor SPI fixes - Add support k2g ice board with 1GHz silicon - Fix GTC programming for K3 devices
2021-01-12arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macroDario Binacchi
Add missing DPLL_EN_FAST_RELOCK_BYPASS macro. Used to put the DPLL in idle bypass fast relock mode. Signed-off-by: Dario Binacchi <[email protected]>
2021-01-11sunxi: Add arm64 FEL supportAndre Przywara
So far we did not support the BootROM based FEL USB debug mode on the 64-bit builds for Allwinner SoCs: The BootROM is using AArch32, but the SPL runs in AArch64. Returning back to AArch32 was not working as expected, since the RMR reset into 32-bit mode always starts execution in the BootROM, but not in the FEL routine. After some debug and research and with help via IRC, the CPU hotplug mechanism emerged as a solution: If a certain R_CPUCFG register contains some magic, the BootROM will immediately branch to an address stored in some other register. This works well for our purposes. Enable the FEL feature by providing early AArch32 code to first save the FEL state, *before* initially entering AArch64. If we eventually determine that we should return to FEL, we reset back into AArch32, and use the CPU hotplug mechanism to run some small AArch32 code snippet that restores the initially saved FEL state. That allows the normal AArch64 SPL build to be loaded via the sunxi-fel tool, with it returning into FEL mode, so that other payloads can be transferred via FEL as well. Tested on A64, H5 and H6. Signed-off-by: Andre Przywara <[email protected]> Tested-by: Icenowy Zheng <[email protected]> Acked-by: Jagan Teki <[email protected]> Tested-by: Priit Laes <[email protected]> (on Olimex A64-Olinuxino)
2021-01-11sunxi: Fix is_boot0_magic macroAndre Przywara
The is_boot0_magic macro is missing parentheses around the macro argument, breaking any usage with a more complex argument. Signed-off-by: Andre Przywara <[email protected]>
2021-01-11sunxi: Factor out eGON BROM header descriptionAndre Przywara
To be able to easily share the Allwinner eGON BROM header structure between the tools and the SPL code, move the struct definition into a separate header file. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Jernej Skrabec <[email protected]> Reviewed-by: Samuel Holland <[email protected]>
2021-01-11meson: Add soc_rev to environmentPascal Vizeli
Add SoC revision to environment. This can be useful to select the correct device tree at runtime (N2/N2+). Signed-off-by: Pascal Vizeli <[email protected]> Signed-off-by: Stefan Agner <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <[email protected]>
2020-12-18dm: Avoid accessing seq directlySimon Glass
At present various drivers etc. access the device's 'seq' member directly. This makes it harder to change the meaning of that member. Change access to go through a function instead. The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now. Signed-off-by: Simon Glass <[email protected]>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <[email protected]>
2020-12-10armv8: lx2162a: Add Soc changes to support LX2162AMeenakshi Aggarwal
LX2162 is LX2160 based SoC, it has same die as of LX2160 with different packaging. LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module, microSD card, eMMC support, serial console, qspi nor flash, qsgmii, sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes interface to support three PCIe gen3 interface. Signed-off-by: Meenakshi Aggarwal <[email protected]> [Fixed whitespace errors] Signed-off-by: Priyanka Jain <[email protected]>
2020-12-09Merge tag 'u-boot-stm32-20201209' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board - Update ARM STI and ARM STM STM32MP Arch maintainers emails - Enable internal pull-ups for SDMMC1 on DHCOM SoM
2020-12-09treewide: Update email address Patrick Delaunay and Patrice ChotardPatrice Chotard
Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2020-12-06imx8: allow overriding memory layoutMarcel Ziswiler
Introduce weak function board_mem_get_layout() which allows overriding the memory layout from board code in runtime, useful for handling different SKU versions. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]>
2020-11-17sunxi: allow to use AXP20[39] attached to I2C0 on V3 seriesIcenowy Zheng
The reference design of Allwinner V3 series uses an AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the first community-available V3s board, Lichee Pi Zero, omitted it. Allow to introduce support for the PMIC on boards with it. Signed-off-by: Icenowy Zheng <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
2020-11-16Merge tag 'u-boot-amlogic-20201116' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Clock fix MMC driver for SM1 based platforms - sync SOC Ids from Linux 5.10-rc1 - fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
2020-11-13video: rockchip: Restrict EDP, VOP, MIPI files to GPL-2.0Alper Nebi Yasak
These files have a lot of code in common with their counterparts in coreboot, especially in their earlier revisions: U-Boot | coreboot --------------------------------------|-------------------------------------------- drivers/video/rockchip/: | src/soc/rockchip/: - rk_edp.c (GPL-2.0+) | - common/edp.c (GPL-2.0-only) " | - rk3288/display.c (GPL-2.0-only) " | - rk3399/display.c (GPL-2.0-only) - rk_hdmi.h (GPL-2.0+) | (none) - rk_hdmi.c (GPL-2.0+) | - rk3288/hdmi.c (GPL-2.0-or-later) - rk3288_hdmi.c (GPL-2.0+) | - rk3288/hdmi.c (GPL-2.0-or-later) - rk3399_hdmi.c (GPL-2.0+) | (none) - rk_mipi.h (GPL-2.0+) | (none) - rk_mipi.c (GPL-2.0+) | - rk3399/mipi.c (GPL-2.0-only) - rk3288_mipi.c (GPL-2.0+) | - rk3399/mipi.c (GPL-2.0-only) - rk3399_mipi.c (GPL-2.0+) | - rk3399/mipi.c (GPL-2.0-only) - rk_lvds.c (GPL-2.0+) | (none) - rk_vop.h (GPL-2.0+) | (none) - rk_vop.c (GPL-2.0+) | - common/vop.c (GPL-2.0-only) - rk3288_vop.c (GPL-2.0+) | - common/vop.c (GPL-2.0-only) - rk3399_vop.c (GPL-2.0+) | (none) | arch/arm/include/asm/arch-rockchip/: | src/soc/rockchip/*/include/soc/*: - edp_rk3288.h (GPL-2.0+) | - common/.../edp.h (GPL-2.0-only) " | - rk3288/.../display.h (GPL-2.0-only) " | - rk3399/.../display.h (GPL-2.0-only) - vop_rk3288.h (GPL-2.0+) | - common/.../vop.h (GPL-2.0-only) Restrict the licenses to match coreboot's so that changes from coreboot can be imported to U-Boot as necessary. HDMI files are already 2.0+ there and rk_lvds.c has no counterpart, so keep them as is. Cc: Simon Glass <[email protected]> Cc: Philipp Tomsich <[email protected]> Cc: Eric Gao <[email protected]> Cc: Jacob Chen <[email protected]> Signed-off-by: Alper Nebi Yasak <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang<[email protected]>
2020-11-12mmc: meson-gx: move arch header to local headerNeil Armstrong
Move the asm/arch-meson/sd_emmc.h to a local meson_gx_mmc.h, remove the useless if/then and fix the meson_gx_mmc.c include. Signed-off-by: Neil Armstrong <[email protected]>
2020-10-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape platforms. - Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-23Revert "arch: arm/xen: add putc() for debugging"Tom Rini
This reverts commit 3a51b2a2c3cedc0d2a9ce981b8e00ab8cefcb6b7. Signed-off-by: Tom Rini <[email protected]>
2020-10-23net: lx2160a.c: Update to set ECx_PMUX precedenceRazvan Ionut Cirjan
As per hardware documentation, ECx_PMUX has precedence over SerDes protocol. For LX2160/LX2162 if DPMACs 17 and 18 are enabled as SGMII through SerDes protocol but ECx_PMUX configured them as RGMII, then the ports will be configured as RGMII and not SGMII. Signed-off-by: Razvan Ionut Cirjan <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2020-10-22Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- sun8i emac changes (Andre) - SCP firmware (Samuel)
2020-10-22arch: arm/xen: add putc() for debuggingAKASHI Takahiro
This new function, xen_debug_putc(), is intended to be used to enable CONFIG_DEBUG_UART on xen guest. Please note that the underlying functionality in Xen is available only when Xen is configured with !NDEBUG but is much simpler than a generic HYPERVISOR_console_io(). Signed-off-by: AKASHI Takahiro <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2020-10-22sunxi: make V3s DRAM initialization more properIcenowy Zheng
Previously, because we have no source code about the DRAM initialization of V3s and missing some configurations (delays and MBUS QoS info), our V3s DRAM initialization sequence is hacked from the H3 one. As the SDK shipped with PineCube contains source code for V3s libdram, we can retrieve these information from it and tweak some other magic bits. Signed-off-by: Icenowy Zheng <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Acked-by: Jagan Teki <[email protected]>
2020-10-21arm: stm32: cleanup arch gpio.hPatrick Delaunay
Cosmetic update of gpio.h: - remove enumerate: stm32_gpio_port, stm32_gpio_pin because STM32_GPIO_XXX values are unused - move STM32_GPIOS_PER_BANK in stm32_gpio.c as its value is IP dependent and not arch dependent No functional change as number of banks and number of gpio by banks is managed by device tree since since DM migration and commit 8f651ca60ba1 ("pinctrl: stm32: Add get_pins_count() ops"). Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-10-05phy: meson-gxl: remove invalid USB3 PHY driverNeil Armstrong
The registers which are managed by the meson-gxl-usb3 PHY driver are actually "USB control" registers (which are "glue" registers which manage OTG detection and routing of the OTG capable port between the DWC2 peripheral-only controller and the DWC3 host-only controller). Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-gxl-usb driver supports the USB control registers on GXL and GXM SoCs (these were previously managed by the meson-gxl-usb3 PHY driver). Signed-off-by: Neil Armstrong <[email protected]>
2020-10-05usb: dwc3: add Amlogic GXL & GXL DWC3 GlueNeil Armstrong
The USB support was initialy done with a set of PHYs and dwc3-of-simple because the architecture of the USB complex was not understood correctly at the time (and proper documentation was missing...). But with the G12A family, the USB complex was correctly understood and implemented correctly. This adds a proper driver for the glue, based on the G12A one, but with enough changes to require a different driver in U-Boot. Signed-off-by: Neil Armstrong <[email protected]>
2020-09-17imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 supportPeng Fan
Latest datasheet revE has removed MIMX8ML7D/5D/7C/5C parts, so update u-boot to remove decoding and support for those parts. Signed-off-by: Ye Li <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2020-09-17imx8mq: fix SSCG_PLL_REFCLK_SEL_xPeng Fan
Fix SSCG_PLL_REFCLK_SEL_x, the offset starts from 0, not 16 Reported-by: Coverity 3448860 Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Ye Li <[email protected]>
2020-09-17imx8mq: fix FRAC_PLL_REFCLK_SEL_MASKPeng Fan
Coverity reported dead code, however it is FRAC_PLL_REFCLK_SEL_MASK was wrongly set. Reported-by: Coverity 10045172 Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Ye Li <[email protected]>
2020-09-17imx7: ccm: correct target interface numPeng Fan
According to i.MX 7Dual Applications Processor Reference Manual, Rev. 1 The target interface CCM root index ranges [0,124], so the number should be 125. Reported-by: Coverity 18045 Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Ye Li <[email protected]>
2020-08-25Merge tag 'u-boot-imx-20200825' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - mx6: SOCs user selectable Fix for imx6q_logic Some DM conversion - mx7: introduce secondary boot device Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/720918010 Signed-off-by: Tom Rini <[email protected]>
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
2020-08-25arm: octeontx2: Add headers for OcteonTX2Suneel Garapati
Signed-off-by: Suneel Garapati <[email protected]>
2020-08-25arm: octeontx: Add headers for OcteonTXSuneel Garapati
Signed-off-by: Suneel Garapati <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-25arm: include/asm/io.h: Add 64bit clrbits and setbits helpersSuneel Garapati
Add 64bit API for clrbits and setbits. Signed-off-by: Suneel Garapati <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-24board: armltd: Add support for Total Compute platformUsama Arif
Total Compute is based on ARM architecture and has the following features enabled in u-boot: - PL011 UART - PL180 MMC - NOR Flash - FIT image with Signature - AVB Signed-off-by: Usama Arif <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2020-08-17ARM: imx: ddr: Add deskew register programmingMarek Vasut
Fill is code for programming the DDR_PHY_CMD_DESKEW_CONx registers, which are optional, but can be used to fill in the byte lane delays. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP i.MX U-Boot Team <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]>
2020-08-17ARM: imx: Add support for switching primary/secondary boot mode to bmodeMarek Vasut
The i.MX6/i.MX7 is capable of booting a secondary "redundant" system image in case the primary one is corrupted. The user can force this boot mode as well by explicitly setting SRC GPR10 bit 30. This can be potentially useful when upgrading the bootloader itself. Expose this functionality to the user. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP i.MX U-Boot Team <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Reviewed-by: Stefano Babic <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-24 17:00:21 +0000