| Age | Commit message (Collapse) | Author |
|---|
|
Restyle all Kconfigs for "arm":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
All of these platforms enable CONFIG_BOARD_EARLY_INIT_F and then have a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <[email protected]>
|
|
Move the arch specific atmel_serial.h header from AT91 to the generic
include/dm/platform_data.
This will be used for support on Microchip LAN969x.
Signed-off-by: Robert Marko <[email protected]>
|
|
With commit 0535e46d55d7 ("scripts/dtc: Update to upstream version
v1.7.2-35-g52f07dcca47c") it is now a fatal error to U-Boot if our
device tree is not 8-byte aligned. In commit 85f586035d75 ("ARM: OMAP2+:
Pad SPL binary to 8-byte alignment before DTB") Beleswar Padhi explains
that we must have ALIGN(x) statements inside of a section to ensure that
padding is included and not simply that the linker address counter is
incremented. To that end, this patch:
- Expands some linker sections to be more readable when adding a second
statement to the section.
- Aligns the final section before _end (for U-Boot) or
_image_binary_end or __bss_end (for xPL phases) by 8-bytes by adding
'. = ALIGN(8);' to the final section before the symbol.
- Ensure that we do have alignment by adding an ASSERT so that when not
aligned we fail to link (and explain why).
- Remove now-spurious '. = ALIGN(x);' statements that were intended to
provide the above alignments.
Tested-by: Michal Simek <[email protected]> # Zynq
Reviewed-by: Ilias Apalodimas <[email protected]>
[trini: Also update arch/arm/cpu/armv8/u-boot.lds as Ilas requested]
Signed-off-by: Tom Rini <[email protected]>
|
|
Our last sync with the kernel was 5.1.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>a #rebased on -next
|
|
Add board specific functions for sama7d65_curiosity.
Signed-off-by: Ryan Wanner <[email protected]>
|
|
Add support for new SoC sama7d65.
Signed-off-by: Ryan Wanner <[email protected]>
|
|
Add board specific functions for sam9x75 curiosity
Signed-off-by: Manikandan Muralidharan <[email protected]>
Reviewed-by: Eugen Hristev <[email protected]>
|
|
Add new Microchip sam9x7 SoC based on an ARM926.
Signed-off-by: Varshini Rajendran <[email protected]>
Signed-off-by: Balamanikandan Gunasundar <[email protected]>
Signed-off-by: Manikandan Muralidharan <[email protected]>
|
|
SAM9X60 has a slightly different watchdog implementation:
- Timer value moved into a new register WLR
- Some MR register fields have their position changed
This patch add SAM9X60 support, also adds a compatible
for SAMA5D4 which is the same as existing SAM9260.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Use the name "mr" since we are referring to timer mode register.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
at91_wdt struct is only used by spl, remove this reference and the struct
itself.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Use consistent lowercase hex prefix style in arch/*
Signed-off-by: E Shattow <[email protected]>
|
|
Tom Rini <[email protected]> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/[email protected]
|
|
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <[email protected]>
|
|
Compared to SAM9X5 the only difference is the DPRAM memory from the
USB High Speed Device Port (UDPHS) hardware block was increased,
so we can reuse the same endpoint data.
Also add compatible "microchip,sam9x60-udc".
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
In one inline function in this header `readl()` is used, but the
declaration was not found, so buildman gave this warning:
w+include/asm/arch/clk.h: In function 'get_h32mxdiv':
w+include/asm/arch/clk.h:65:16: warning: implicit declaration of function 'readl' [-Wimplicit-function-declaration]
Fixes: 927b901b47a6 ("ARM: atmel: add sama5d4ek board support")
Signed-off-by: Alexander Dahl <[email protected]>
|
|
Simon Glass <[email protected]> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <[email protected]>
|
|
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
The AT91-based platforms have a mem_init() function declared in
arch/arm/mach-at91/include/mach/at91_common.h and implemented in various
places. In preparation of the introduction of the lwIP networking library
which also has a global mem_init() function, rename the AT91 one to
at91_mem_init().
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Hari Prasath Gujulan Elango <[email protected]>
|
|
As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.
Acked-by: Nicolas Ferre <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
commit 6e2228fb052b ("Merge patch series "Clean up arm linker scripts")
was cleaning up linker scripts for armv7 and v8 but was leaving
_end and __secure_stack_start/end.
commit d0b5d9da5de2 ("arm: make _end compiler-generated")
was moving _end to be compiler generated. _end is defined as c variable
in its own section to force the compiler emit relative a reference.
However, defining those in the linker script will do the same thing
since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols.
It's worth noting that _image_binary_end symbol is now redundant and
can be removed in the future.
- SPL
The .end section has been removed from the new binary
[ 5] .end
PROGBITS 00000000fffdf488 000000000002f488 0
0000000000000000 0000000000000000 0 1
[0000000000000003]: WRITE, ALLOC
$~ bloat-o-meter kria_old/spl/u-boot-spl krina_new/spl/u-boot-spl
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=115980, After=115980, chg +0.00%
$~ readelf -sW kria_old/u-boot kria_new/u-boot | grep -w _end
12047: 000000000813a0f0 0 OBJECT GLOBAL DEFAULT 11 _end
12047: 000000000813a118 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW kria_old/spl/u-boot-spl kria_new/spl/u-boot-spl | grep -w _end
1605: 00000000fffdf488 0 OBJECT GLOBAL DEFAULT 5 _end
1603: 00000000fffdf498 0 NOTYPE GLOBAL DEFAULT 4 _end
$~ readelf -sW old/u-boot new/u-boot | grep -w _end
8847: 0000000000103710 0 OBJECT GLOBAL DEFAULT 11 _end
8847: 0000000000103738 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW old_v7/u-boot new_v7/u-boot | grep -w _end
10638: 000da824 0 OBJECT GLOBAL DEFAULT 10 _end
10637: 000da84c 0 NOTYPE GLOBAL DEFAULT 10 _end
- For both QEMU instances
$~ bloat-o-meter old/u-boot new/u-boot
add/remove: 0/0 grow/shrink: 1/0 up/down: 20/0 (20)
Function old new delta
version_string 50 70 +20
Total: Before=656915, After=656935, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from all mach-at91 files and when needed add missing
include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add initial support for SAMA7G54 Curiosity board.
Hardware:
SoC: SAMA7G54D2G SiP 1000 MHz
DRAM: DDR3 256 MiB
PMIC: MCP16502
Debug: UART3
Flash: QSPI NOR 8 MiB, SLC NAND 512 MiB
M.2 slot for wireless
Mikrobus connectors x 2
SD-Card connectors x 1
USB 2.0 x 3
Signed-off-by: Mihai Sain <[email protected]>
|
|
The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.
Signed-off-by: Tom Rini <[email protected]>
|
|
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama <[email protected]>
Signed-off-by: Jakub Klama <[email protected]>
Co-developed-by: Marcin Jabrzyk <[email protected]>
Signed-off-by: Marcin Jabrzyk <[email protected]>
Signed-off-by: Artur Rojek <[email protected]>
|
|
Add initial support for sama5d29_curiosity board.
Hardware:
SoC: SAMA5D29 500 MHz
DRAM: LPDDR2 512 MiB
PMIC: MCP16502
Debug: UART0
Flash: QSPI NOR 8 MiB
RGB LCD connector
Mikrobus connectors x 2
SD-Card connectors x 2
USB 2.0 x 2
Signed-off-by: Mihai Sain <[email protected]>
|
|
Prepare v2023.07-rc6
|
|
Because clock devices are initialized by the SCMI server, if
CONFIG_CLK_SCMI is defined.
Signed-off-by: Clément Léger <[email protected]>
Signed-off-by: Thomas Perrot <[email protected]>
|
|
As part of various code clean-ups we have on occasion missed removing
unused header files. None of these files are referenced anywhere else
at this point.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove some CONFIG symbols and related comments, etc, that are unused
within the code itself at this point.
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2023.04 cycle:
This feature set includes the new DM-based NAND flash driver (old non-DM
driver is still kept for backwards compatibility), and the move to DM
NAND flash driver for sam9x60ek board. Feature set also includes
devicetree alignment for sama7g5 with Linux, devicetree alignment on USB
with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor
configs and tweaks.
|
|
Special Function Registers(SFR) definitions for SAMA7 product family.
Signed-off-by: Cristian Birsan <[email protected]>
Signed-off-by: Sergiu Moga <[email protected]>
|
|
Add SAMA7G5 series chip id definitions to align with linux SoC driver.
Add support for SAMA7G5 System-In-Package (SIP):
SAMA7G54D1G, SAMA7G54D2G, SAMA7G54D4G.
Signed-off-by: Mihai Sain <[email protected]>
|
|
We only need to enable DM_ETH if we have a networking driver. All
networking drivers depend on DM_ETH being enabled, and their selection
ensures DM_ETH will be enabled.
Signed-off-by: Tom Rini <[email protected]>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().
Rename it to resolve this problem.
Signed-off-by: Simon Glass <[email protected]>
|
|
This has not been migrated to DM_VIDEO since 2019. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Globally replace all occurances of WATCHDOG_RESET() with schedule(),
which handles the HW_WATCHDOG functionality and the cyclic
infrastructure.
Signed-off-by: Stefan Roese <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Tom Rini <[email protected]> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
|
|
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.
Cc: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2022.10 cycle:
This feature set includes mostly fixes and alignments: DT alignment with
Linux for sama7g5, removal of invalid eeprom compatibles, removal of
extra debug_uart_init calls for all at91 boards, support for pio4 driver
pioE bank, and other minor fixes and enhancements for sam9x60 and
sama5d2_icp boards.
|
|
Add support for gpio PORT E, which is available on e.g. sama7g5 SoC.
Signed-off-by: Mihai Sain <[email protected]>
|
|
We want to keep all of the default values for SPL_LDSCRIPT in the same
place both for overall clarity as well as not polluting unrelated config
files.
Signed-off-by: Tom Rini <[email protected]>
|
