| Age | Commit message (Collapse) | Author |
|---|
|
As explained in commit 03d2d5fc003f ("board: sifive: unmatched: set
fdtfile with unquoted variable.") using the syntax of
'fdtfile=CONFIG_DEFAULT_FDT_FILE' in the plain text environment files
will lead to extraneous and problematic "s in the output. This is fixed
by using fdtfile=DEFAULT_FDT_FILE which was introduced recently.
Acked-by: Peng Fan <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
PHYTEC maintains an actively monitored mailing list for upstream
activities: [email protected]. Add it to the MAINTAINERS
entries for PHYTEC boards we actively develop and contribute to.
Signed-off-by: Wadim Egorov <[email protected]>
Acked-by: Teresa Remmet <[email protected]>
|
|
The current spl_board_fixups API allows for modification of spl_image
before the SPL jumps to it. This can be used to modify the DT for the
next boot stage, however the current API only allows either the machine
arch or the board to use it.
This limits the utility of the API as there might be certain fixups that
should be applied to all boards sharing the same machine architecture
with others being board specific.
For TI's K3 specifically, this prevents us from performing architecture
level fixups since a lot of TI boards are already making use of the
spl_board_fixups API.
Therefore this patch splits the API into two to allow both board and the
architecture specific fixups. The order is kept as arch then board to
give board specific fixups the precedence.
Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
SoCFPGA updates for v2025.10:
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762
This pull request brings a set of updates across SoCFPGA platforms
covering Agilex5, Agilex7, N5X, and Stratix10. The changes include:
* Agilex5 enhancements:
- USB3.1 enablement and DWC3 host driver support
- System Manager register configuration for USB3
- Watchdog timeout increase and SDMMC clock API integration
- dcache handling improvements in SMC mailbox path
- Enable SPL_SYS_DCACHE_OFF in defconfig
* Clock driver improvements:
- Introduce dt-bindings header for Agilex clocks
- Add enable/disable API and EMAC clock selection fixes
- Replace manual shifts with FIELD_GET usage
* DDR updates:
- IOSSM mailbox compatibility check
- Correct DDR calibration status handling
* Device tree changes:
- Agilex5: disable cache allocation for reads
- Stratix10: add NAND IP node
- Enable driver model watchdog
- Enable USB3.1 node for Agilex5
* Config cleanups:
- Simplify Agilex7 VAB defconfig
- Remove obsolete SYS_BOOTM_LEN from N5X VAB config
- Enable CRC32 support for SoCFPGA
- Increase USB hub debounce timeout
Overall this set improves reliability of DDR and cache flows,
adds missing USB and MMC features for Agilex5, and refines clock
and configuration handling across platforms.
This patch set has been tested on Agilex 5 devkit, and Agilex devkit.
|
|
After switching our boards to standard boot, we observed that the
kernel hangs when booting with the "script" boot method over the
network.
The original scriptaddr value was copied from ti_common.env and
remained unused for some time. On phycore-am62x and phycore-am62ax,
however, this address conflicts with the current location where
ATF is loaded (CONFIG_K3_ATF_LOAD_ADDR).
Move scriptaddr to 0x89100000, directly after fdtoverlay_addr_r.
The phycore-am64x is not affected by this issue, but we update it
as well to keep all phycore-am6xx boards consistent.
Signed-off-by: Wadim Egorov <[email protected]>
Reviewed-by: Anshul Dalal <[email protected]>
|
|
Prepare v2025.10-rc3
|
|
Add rauc to bootmeths variable if BOOTMETH_RAUC is enabled.
This is setting a proper default for RAUC enabled systems.
Signed-off-by: Wadim Egorov <[email protected]>
Reviewed-by: Martin Schwan <[email protected]>
|
|
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <[email protected]>
Tested-by: Adam Ford <[email protected]> #imx8mm_beacon
Tested-by: Bryan Brattlof <[email protected]>
Acked-by: Peng Fan <[email protected]> #NXP boards
|
|
As part of our migration to the standard boot process, configure the
default values for the bootmeths and boot_targets environment variables.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Add fit_addr_r to the environment to allow us to boot from a FIT image.
Signed-off-by: Nathan Morrisson <[email protected]>
Signed-off-by: Wadim Egorov <[email protected]>
|
|
The write_host_id is the last element here and order does matter. This
may have gone unnoticed before as by default all elements are 0, but
if this is updated to a different host, it will not work. Update
the order so write_host_id is the last element in all current secure
board configs.
Reported-by: Prashant Shivhare <[email protected]>
Signed-off-by: Andrew Davis <[email protected]>
|
|
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
Detect RAM size via EEPROM and adjust DDR size and banks accordingly.
Include necessary fixups to handle ECC-enabled configurations.
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: Daniel Schultz <[email protected]>
|
|
Include the boot logic to boot via Network or from a OSPI/QSPI
NOR flash. Moreover, set all required variables to both boot
methods to the environment.
Note: The phyBOARD-Electra AM64x is not able to load the U-Boot
via Network. However, it's still possible to load the kernel.
Signed-off-by: Daniel Schultz <[email protected]>
|
|
Use our common environment file to implement MMC boot.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
By moving the earlycon definition into a dedicated variable, it's
easier to change these values in case the kernel should print on
a different serial interface.
Signed-off-by: Daniel Schultz <[email protected]>
|
|
Daniel Schultz <[email protected]> says:
This patch series extends PHYTEC's SOM detection by minor
fixes, a generic helper function and a new valid flag.
Moreover, it adds a module to provide access to the SOM
detection for our TI AM6 products.
|
|
Add all functions to read each SOM option from the EEPROM
image and detect whether it's the correct product for this
image.
Signed-off-by: Daniel Schultz <[email protected]>
|
|
The phycore-am64x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB
& SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Add support for PHYTEC phyCORE-AM64x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- external uSD
- OSPI NOR Flash
- debug UART
Product page SoM: https://www.phytec.com/product/phycore-am64x
Device trees were taken from Linux v6.8-rc2.
Signed-off-by: Wadim Egorov <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
