| Age | Commit message (Collapse) | Author |
|---|
|
Use tabs instead of spaces.
Signed-off-by: Teresa Remmet <[email protected]>
|
|
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Teresa Remmet <[email protected]>
|
|
The PHYCORE_IMX8MM is used by the phyBOARD-Polis and the
phyGATE-Tauri-L. Migrate both boards to OF_UPSTREAM. Linux kernel device
trees for both boards can be used as is, corresponding U-Boot device
tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Teresa Remmet <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Wadim Egorov <[email protected]> says:
Factor out code that we can reuse across all our K3 based SoMs.
2nd patch of this series require patch [1] to be applied first.
[1] https://lists.denx.de/pipermail/u-boot/2024-April/552021.html
|
|
Environment handling code can be reused across all our K3 based SoMs.
Instead of adding the same code for every new SoM, move it to a common
board.c file.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Acked-by: Wadim Egorov <[email protected]>
Acked-by: Teresa Remmet <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The file include/eeprom.h is used only in some legacy non-DM I2C EEPROM
access cases. Remove most inclusions of this file as they are not
needed.
Signed-off-by: Tom Rini <[email protected]>
|
|
Daniel Schultz <[email protected]> says:
This patch series extends PHYTEC's SOM detection by minor
fixes, a generic helper function and a new valid flag.
Moreover, it adds a module to provide access to the SOM
detection for our TI AM6 products.
|
|
Add all functions to read each SOM option from the EEPROM
image and detect whether it's the correct product for this
image.
Signed-off-by: Daniel Schultz <[email protected]>
|
|
The ptr variable is currently defined as int and sizeof
returns the size of the eeprom data struct as Byte (32 in total).
In case the eeprom is empty, the check, if the eeprom is empty,
will most likely stop after 8 iterations because it will continue
with the stack which should contain some data. Therefore, the
init function will detect an empty EEPROM as API0 and return with
the valid flag set to True.
Fixes: dc22188cdc8 ("board: phytec: Add common PHYTEC SoM detection")
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
For all of the functions that access the eeprom_data, make sure these
data are valid. Use the valid member of the phytec_eeprom_data struct.
This fixes a bug where only the API revision check guarded against
accessing rubbish. But if API revision was e.g. 6, eeprom setup failed
before, but phytec_get_imx8m_eth would still happily access the data.
Fixes: dc22188cdc8 ("board: phytec: Add common PHYTEC SoM detection")
Signed-off-by: Yannic Moog <[email protected]>
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
Add a new nember to the eeprom_data that indicates whether the
associated data is valid or not. Make use of this new member in the
phytec_eeprom_data_init function by setting the valid value
appropriately.
Move the eeprom data to a new struct payload that holds
the payload of the eeprom.
Signed-off-by: Yannic Moog <[email protected]>
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
Add a generic function to apply overlays in our board code to not
implement the same logic in different PHYTEC products.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
Wadim Egorov <[email protected]> says:
Migrate the boards I maintain to OF_UPSTREAM.
|
|
The phycore-rk3288 can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for rockchip vendor prefix accordingly.
Move device tree nodes required for u-boot to rk3288-phycore-rdk-u-boot.dtsi
such as chosen, i2c_eeprom_id and it's alias.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
The phycore-am64x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB
& SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
The phycore-am62x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
The following information printed on every boot is not very
helpful for the users:
SOC: 0xa0009300
LC: 0x40040
Move them to debug() level.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Mathieu Othacehe <[email protected]>
|
|
Select environment location based on the device we boot from.
Also, introduce a "boot" variable that represents the current boot
device and can be used by scripts.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Since the event callback imx9_probe_mu is re-defined, update
its prototype.
Signed-off-by: Ye Li <[email protected]>
|
|
Prepare v2024.04-rc5
|
|
The "run netargs" command should come later in the "netboot" command
order when using dhcp since it sets the server and client ip addresses.
The previous order led to misconfigured kernel boot params and thus
kernel panic when serverip was not manually set.
Further, following Linux FHS 3.0, change the nfsroot default directory
to /srv/nfs.
Fixes: 60f64bec414e ("board: phytec: phycore_imx8mp: Add fec support")
Signed-off-by: Yannic Moog <[email protected]>
|
|
Add RAUC boot logic to the environment. This is the first board to
utilize this environment.
Signed-off-by: Leonard Anderweit <[email protected]>
Tested-by: Teresa Remmet <[email protected]>
|
|
Move the default bootcmd from the defconfig to the board environment.
No change in functionality.
Signed-off-by: Leonard Anderweit <[email protected]>
Tested-by: Teresa Remmet <[email protected]>
|
|
Move the environment into the board directory and convert it from a C
header to a text file. Sort the variables alphabetically.
No functional changes.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
Tested-by: Teresa Remmet <[email protected]>
|
|
define the phytec_get_som_type function also when the SoM detection is
disabled.
Fixes:
commit 110d321a56c3 ("board: phytec: common: phytec_som_detection: Add phytec_get_som_type")
Signed-off-by: Benjamin Hahn <[email protected]>
|
|
While there are currently uses for a stanza of "config BOARD_SPECIFIC_OPTIONS"
followed by "def_bool y" and a series of select/imply statements, having
this option set followed by nothing else doesn't provide anything.
Remove these stanzas.
Signed-off-by: Tom Rini <[email protected]>
|
|
Prepare v2024.04-rc4
|
|
We need to differ between PCL-070 and PCM-070. PCL-070 supports 2GHz RAM
timings from pcb rev 1 or newer. PCM-070 supports 2GHz RAM timings from
pcb rev 3 or newer.
Signed-off-by: Benjamin Hahn <[email protected]>
|
|
Add a function that gets the som_type from the EEPROM.
Add an enum for the som_type.
Signed-off-by: Benjamin Hahn <[email protected]>
|
|
Add support for PHYTEC phyCORE-AM64x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- external uSD
- OSPI NOR Flash
- debug UART
Product page SoM: https://www.phytec.com/product/phycore-am64x
Device trees were taken from Linux v6.8-rc2.
Signed-off-by: Wadim Egorov <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
This fixes OP-TEE support by:
- Adding tee.bin to container.cfg
- Starting ELE RNG in SPL
Signed-off-by: Mathieu Othacehe <[email protected]>
|
|
Put imx9_probe_mu declaration in a new mu.h header file.
Signed-off-by: Mathieu Othacehe <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
|
|
add support for Serial Downloader Boot via UUU as well as flashing emmc
via UUU on USB0 Port of phyBOARD Pollux.
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Benjamin Hahn <[email protected]>
|
|
Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
the PHYTEC phyCORE-i.MX93 SoM.
Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- FEC Ethernet
- debug UART
- watchdog
Signed-off-by: Mathieu Othacehe <[email protected]>
Tested-by: Primoz Fiser <[email protected]>
Reviewed-by: Yannic Moog <[email protected]>
|
|
Clean up all configuration files to adhere to yamllint rules.
Signed-off-by: Neha Malcom Francis <[email protected]>
[trini: Update more yaml files added since this was posted]
Signed-off-by: Tom Rini <[email protected]>
Suggested-by: Nishanth Menon <[email protected]>
|
|
Add basic support for PHYTEC phyCORE-AM62x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- OSPI NOR Flash
- external uSD
- Ethernet
- debug UART
Product page SoM: https://www.phytec.com/product/phycore-am62x
Device trees were taken from Linux v6.7-rc3.
Signed-off-by: Wadim Egorov <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Commit aa7858fe5e2e ("board: phytec: som_detection: move definitions to
source file") moved function definitions from header to source file.
Makefile however was not updated to unconditionally (from
[..]_SOM_DETECTION) build the imx8 and phytec som detection units.
Also remove unused includes that cause build failures on arm 32bit
boards. SoM detection shall support 32bit boards as well, but arch
specific code should not be included in the generic module.
Fixes: aa7858fe5e2e ("board: phytec: som_detection: move definitions to source file")
Signed-off-by: Yannic Moog <[email protected]>
|
|
Add rst documentation files to the respective MAINTAINERS file for
PHYTEC boards.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
Add brief documentation on how to build a bootable U-Boot image for the
phyGATE-Tauri-L.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
phyGATE-Tauri-L-iMX8MM is a Gateway based on the phycore-imx8mm SoM.
As a result, all the board code of the phycore-imx8mm is used.
Device tree synced with kernel v6.7.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
|
|
When som_type does not match any case, it is uninitialized and the
function still tries to print the SoM info. Rather, this is an error
condition and the function should abort prematurely. Highlight this by
printing an error message and returning early.
Signed-off-by: Yannic Moog <[email protected]>
|
|
Move all function definitions in {phytec|imx8m}_som_detection from the
header to the source file to prevent potential linker error regarding
multiple definitions. Also move the #if blocks with the definitions.
Signed-off-by: Yannic Moog <[email protected]>
|
|
In phytec_eeprom_data_init, after reading eeprom data into buffer, it is
checked whether all bytes are 0x0 by iterating over chunks of the
buffer. The offset, or index of the chunk, was never changed, leading to
repeated comparison of only the first chunk. Use array notation and
access chunk via array index to compare all chunks of the buffer.
Signed-off-by: Yannic Moog <[email protected]>
|
|
Pointer in phytec_imx8m_detect was accessed without checking it first.
Fix this by moving the pointer check in front of any accesses.
Signed-off-by: Yannic Moog <[email protected]>
|
|
phytec_imx8m_detect returns -1 on error, but the return type is u8
leading to 255 return values. Fix this by changing the return type to
int; there is no reason to keep it as u8 .
Signed-off-by: Yannic Moog <[email protected]>
|
|
Sync the devicetree files used in the kernel for the imx8mm-phyboard-polis
with the corresponding devicetree files in U-Boot.
Replaced phycore-imx8mm.dts with kernel dts imx8mm-phyboard-polis-rdk.dts
Synced with kernel 6.5.0-rc1 commit
e752a4f9589c (arm64: dts: freescale: imx8mm-phyboard: Add I2C4 pinmuxing)
Signed-off-by: Cem Tenruh <[email protected]>
|
|
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <[email protected]>
|
