| Age | Commit message (Collapse) | Author |
|---|
|
Introduce board/renesas/common/Makefile and remove the multiple
duplicate copies of obj := ../common/*.o from board Makefiles.
Let the build system include the common Makefile using the
HAVE_VENDOR_COMMON_LIB and build the common objects that are
shared by all the boards that way. No functional change intended.
Some of the remaining board files which include board specific
settings have been updated to use obj-y += to avoid rewriting
the board obj-y target and avoid dropping object files from the
build.
The board/renesas/common/Makefile is now also used when building
RZG2L targets which also set CONFIG_RCAR_64 symbol and 32bit R-Car
Gen2 targets, however, this common code is specific to 64bit R-Car
only. Inhibit the build of this common code for RZG2L using extra
ifndef CONFIG_RZG2L and do not include any code for R-Car Gen2 so
far.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Rename directory board/renesas/rcar-common to board/renesas/common and
move files. This allows the build system to use HAVE_VENDOR_COMMON_LIB
which automatically includes board/$(VENDOR)/common/Makefile . Create
temporarily empty board/renesas/common/Makefile to be extended with
actual content later in this series. This is a preparatory patch for
board Makefile simplification. No functional change so far.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Split common board code for R-Car Gen3 and Gen4 into separate files.
The R-Car Gen3 board code contains fixups specific to TFA which are
no longer required on R-Car Gen4, keep those fixups in its own file
so they would not interfere with Gen4.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename arch-rmobile to arch-renesas and mach-rmobile to mach-renesas
because all the chips are made by Renesas, while only a subset of
them is from the R-Mobile line.
Use the following command to perform the rename, with manual move of
the directories using git mv and manual fix up to arch/arm/Makefile:
"
$ git grep -l '\<\(arch\|mach\)-rmobile\>' | \
xargs -I {} sed -i 's@\<\(arch\|mach\)-rmobile\>@\1-renesas@g' {}
$ sed -i 's@rmobile@renesas@' board/*/*/Kconfig
"
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Update MAINTAINERS file. Add missing MAINTAINERS file for Spider,
Whitehawk and V3HSK boards. Update mail addresses. Add file globs
to match on DT and driver files related to these boards.
The GRPEACH and R2DPLUS are special in that they are not R-Car
and have their own set of specialized drivers.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Introduce weak default board_init() in rcar-common/common.c , which
allows complete removal of ebisu.c and condor.c at the same time .
Signed-off-by: Marek Vasut <[email protected]>
|
|
There is no need to pull in all those headers as the board file is
basically empty. Drop them all.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The reset_cpu() implementation is basically the same across Gen3
SoCs and identical across Gen4 SoCs. Introduce weak default for
reset_cpu(), so that it does not have to be duplicated in every
board file again.
There is a slight difference for CA53 only systems, like E3 and D3,
which now check MIDR for CPU ID first just like the other systems,
but this is OK since the MIDR always returns CA53 core type and the
correct reset register is written.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The bootparams do not have to be at fixed location, they can be
dynamically mallocated instead. Make it so to get rid of another
fixed assignment.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Biju Das <[email protected]>
Cc: Lad Prabhakar <[email protected]>
|
|
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to. This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value. Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.
Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g. COLD vs WARM resets). As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).
To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely. Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.
This transformation was done with the following coccinelle patch:
@@
expression argvalue;
@@
- reset_cpu(argvalue)
+ reset_cpu()
@@
identifier argname;
type argtype;
@@
- reset_cpu(argtype argname)
+ reset_cpu(void)
{ ... }
Signed-off-by: Harald Seiler <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove empty board_early_init_f function, since it is disabled
in ebisu and condor board configs.
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
|
|
Default s_init weak function available, so remove the
s_init empty function.
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
|
|
Move this uncommon header out of the common header.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.
Signed-off-by: Simon Glass <[email protected]>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <[email protected]>
|
|
Move this function out of common.h and into a relevant header file.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add board code for the R8A77980 V3H Condor board.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
|
