| Age | Commit message (Collapse) | Author |
|---|
|
Introduce board/renesas/common/Makefile and remove the multiple
duplicate copies of obj := ../common/*.o from board Makefiles.
Let the build system include the common Makefile using the
HAVE_VENDOR_COMMON_LIB and build the common objects that are
shared by all the boards that way. No functional change intended.
Some of the remaining board files which include board specific
settings have been updated to use obj-y += to avoid rewriting
the board obj-y target and avoid dropping object files from the
build.
The board/renesas/common/Makefile is now also used when building
RZG2L targets which also set CONFIG_RCAR_64 symbol and 32bit R-Car
Gen2 targets, however, this common code is specific to 64bit R-Car
only. Inhibit the build of this common code for RZG2L using extra
ifndef CONFIG_RZG2L and do not include any code for R-Car Gen2 so
far.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
The SPL on R-Car V3U Falcon is never built, remove the Makefile entry.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Rename directory board/renesas/rcar-common to board/renesas/common and
move files. This allows the build system to use HAVE_VENDOR_COMMON_LIB
which automatically includes board/$(VENDOR)/common/Makefile . Create
temporarily empty board/renesas/common/Makefile to be extended with
actual content later in this series. This is a preparatory patch for
board Makefile simplification. No functional change so far.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
All R-Car Gen4 board files are copies of one another at this point.
Deduplicate them into single board/renesas/rcar-common/gen4-common.c
and remove all the duplicates. The one exception is R-Car V3U Falcon
board, which enables RWDT reset in board_init(), conditionally build
RWDT enablement in board_init() in the new common code for V3U.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rename arch-rmobile to arch-renesas and mach-rmobile to mach-renesas
because all the chips are made by Renesas, while only a subset of
them is from the R-Mobile line.
Use the following command to perform the rename, with manual move of
the directories using git mv and manual fix up to arch/arm/Makefile:
"
$ git grep -l '\<\(arch\|mach\)-rmobile\>' | \
xargs -I {} sed -i 's@\<\(arch\|mach\)-rmobile\>@\1-renesas@g' {}
$ sed -i 's@rmobile@renesas@' board/*/*/Kconfig
"
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Rename rmobile.h to renesas.h because all the chips are made
by Renesas, while only a subset of them is from the R-Mobile
line.
Use the following command to perform the rename:
"
$ git grep -l 'include.*rmobile.h' | \
xargs -I {} sed -i '/include.*rmobile.h/ [email protected]@renesas.h@g' {}
"
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
The header file is not necessary in either of those files,
remove it as common.h is going away.
Include missing asm/arch/rmobile.h in board/renesas/rcar-common/v3-common.c
to prevent build failure of r8a77970_eagle r8a779a0_falcon r8a77980_v3hsk
and r8a77970_v3msk .
Include missing asm/u-boot.h in falcon.c and grpeach.c to fix build failure
due to missing definition of struct bd_info . Include errno.h in grpeach.c
to fix build error due to missing definition of EINVAL.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Update MAINTAINERS file. Add missing MAINTAINERS file for Spider,
Whitehawk and V3HSK boards. Update mail addresses. Add file globs
to match on DT and driver files related to these boards.
The GRPEACH and R2DPLUS are special in that they are not R-Car
and have their own set of specialized drivers.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The reset_cpu() implementation is basically the same across Gen3
SoCs and identical across Gen4 SoCs. Introduce weak default for
reset_cpu(), so that it does not have to be duplicated in every
board file again.
There is a slight difference for CA53 only systems, like E3 and D3,
which now check MIDR for CPU ID first just like the other systems,
but this is OK since the MIDR always returns CA53 core type and the
correct reset register is written.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Enable RWDT reset on Reset Controller so that it can be used as
reset trigger source for V3U Falcon.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]> # Use one current_el() in board_init
|
|
U-Boot executes at EL3 is required to initalize those settings.
In other cases, they will be done by prior-stage firmware instead.
This fixes crash when U-Boot is at non-secure exception level.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().
Rename it to resolve this problem.
Signed-off-by: Simon Glass <[email protected]>
|
|
Init GICv3 for V3U Falcon in early phase
Signed-off-by: Koji Matsuoka <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Init the Generic Timer for V3U Falcon in early phase
Signed-off-by: Koji Matsuoka <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add board code for the R8A779A0 V3U Falcon board.
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
--
Marek: - various small rebase fixes and clean ups
|
