| Age | Commit message (Collapse) | Author |
|---|
|
The build system uses HAVE_VENDOR_COMMON_LIB to automatically include
board/$(VENDOR)/common/Makefile, therefore let's use that to implicitly
include board/theobroma-systems/common/Makefile and compile the common.c
file when building proper.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Currently, if the environment is stored on an MMC device, the device
number is hardcoded by CONFIG_SYS_MMC_ENV_DEV. This is problematic
because many boards can choose between booting from an SD card or a
removable eMMC. For example, the Rock64 defconfig sets
CONFIG_SYS_MMC_ENV_DEV=1, which corresponds to the SD card. If an eMMC
is used as the boot device and no SD card is installed, it is impossible
to save the environment.
To avoid this problem, we can choose the environment MMC device based on
the boot device. The theobroma-systems boards already contain code to do
this, so this commit simply moves it to the common Rockchip board file,
with some refactoring. I also removed another implementation of
mmc_get_env_dev() from tinker_rk3288 that performed MMC boot device
detection by reading a bootrom register.
This has been tested on a Rock64v2.
Signed-off-by: Ben Wolsieffer <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
U-Boot proper automatically modifies boot_targets to swap the order in
which MMC storage media are used for standard boot based on which MMC
storage medium was used to load U-Boot proper. This is however only done
if the user has not changed it manually, therefore a check between the
default and current value is done.
This used to work fine until the migration to standard boot where
boot_targets value size in the default environment went above the 32
characters that env_get_default function can return, thus resulting in a
truncated variable.
Therefore the check between default and current value would always fail.
By using the newly added env_get_default_into function, a buffer of
the appropriate size can be allocated on the stack to get the whole
value of boot_targets in the default environment and thus fixing the
check.
Cc: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
Ringneck PX30 and Puma RK3399 both have the same expectation with regard
to bootstd device order and U-Boot environment storage device, except
that Puma RK3399 also supports SPI Flash.
Let's move all of this into a common file where common logic can be put.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
