| Age | Commit message (Collapse) | Author |
|---|
|
Restyle all Kconfigs:
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
On the j722s platform, the DM firmware resets the wkup_r5 core at boot to
enable both of its TCM memories.
This reset sequence involves three steps:
- Acquiring processor ownership of wkup_r5
- Configuring the core and requesting a reset via TIFS
- Releasing ownership.
When the Linux remoteproc driver comes up, it acquires ownership of wkup_r5
to query its state, making A53_2 the new owner.
During system suspend, TIFS saves the processor ACL[1] table to DDR as
part of its context.
On resume, TIFS restores the ACL table, leaving A53_2 as the owner of
wkup_r5. At this point, DM (WKUP_0_R5_0 host[2]) no longer has ownership
and is therefore unable to perform the reset sequence it needs,
causing it to crash.
To fix this, configure the wkup_r5[3] processor with dual ownership:
- WKUP_0_R5_0 (Secure) as primary owner.
- A53_2 (Non-Secure) as secondary owner.
[1] https://software-dl.ti.com/tisci/esd/latest/3_boardcfg/BOARDCFG_SEC.html#pub-boardcfg-proc-acl
[2] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/hosts.html
[3] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j722s/processors.html
Signed-off-by: Abhash Kumar Jha <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
Repurpose the allocated resources with version V11.02.07 of
k3-resource-partition.
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
The current spl_board_fixups API allows for modification of spl_image
before the SPL jumps to it. This can be used to modify the DT for the
next boot stage, however the current API only allows either the machine
arch or the board to use it.
This limits the utility of the API as there might be certain fixups that
should be applied to all boards sharing the same machine architecture
with others being board specific.
For TI's K3 specifically, this prevents us from performing architecture
level fixups since a lot of TI boards are already making use of the
spl_board_fixups API.
Therefore this patch splits the API into two to allow both board and the
architecture specific fixups. The order is kept as arch then board to
give board specific fixups the precedence.
Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
|
|
Chintan Vankar <[email protected]> says:
This series adds bind method for CPSW to avoid explicit probing, removes
explicit probing of CPSW, adds support for Ethernet boot on SK-AM68,
SK-AM62P-LP, J722S, SK-AM69.
Link: https://lore.kernel.org/r/[email protected]
|
|
Enable cache for J722s to optimize performance of CPU to access data from
memory.
Reviewed-by: Alexander Sverdlin <[email protected]>
Signed-off-by: Chintan Vankar <[email protected]>
|
|
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <[email protected]>
Tested-by: Adam Ford <[email protected]> #imx8mm_beacon
Tested-by: Bryan Brattlof <[email protected]>
Acked-by: Peng Fan <[email protected]> #NXP boards
|
|
Move to using the latest generated RM YAML configuration files generated
by the K3 Resource Partitioning Tool which updates them to have standard
formatting with respect to indentation.
These files were generated from the untagged commit 41718bd5f915 ("docs: Update
docs and move them to docs folder") of the K3 Resource Partitioning tool. This
tool is packaged as a part of the public SDK and is not otherwise
publicly available.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Udit Kumar <[email protected]>
|
|
The write_host_id is the last element here and order does matter. This
may have gone unnoticed before as by default all elements are 0, but
if this is updated to a different host, it will not work. Update
the order so write_host_id is the last element in all current secure
board configs.
Reported-by: Prashant Shivhare <[email protected]>
Signed-off-by: Andrew Davis <[email protected]>
|
|
Siddharth Vadapalli <[email protected]> says:
This series enables USB DFU and USB Mass Storage functionality for
AM62, AM62-LP, AM62A, AM62P and J722S SoCs.
Link: https://lore.kernel.org/r/[email protected]
|
|
Include the TI K3 DFU environment to support DFU Boot and DFU Flash.
Signed-off-by: Siddharth Vadapalli <[email protected]>
|
|
Include k3_rproc.env to access rproc boot commands and specify rproc
firmware names for adding remoteproc support in J722S SoCs.
Signed-off-by: Beleswar Padhi <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
|
|
size when ECC is enabled
As there are few redundant functions in board/ti/*/evm.c files, pull
them to a common location of access to reuse and include the common file
to access the functions.
Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the
device tree and resize the available amount of DDR, if ECC is enabled.
Otherwise, fixup the device tree using the regular
fdt_fixup_memory_banks().
Also call dram_init_banksize() after every call to
fixup_ddr_driver_for_ecc() is made so that gd->bd is populated
correctly.
Ensure that fixup_ddr_driver_for_ecc() is agnostic to the number of DDR
controllers present.
Signed-off-by: Santhosh Kumar K <[email protected]>
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
Update J722S Resource Management configs to the latest output
generated by K3 Resource Partitioning tool. Main change includes
allocating more BCDMA channels to A53 for CSI2RX to support
4 x CSIRX capture instance simultaneously.
Signed-off-by: Vaishnav Achath <[email protected]>
Reviewed-by: Jayesh Choudhary <[email protected]>
|
|
stdboot and legacy boot depend on fdtfile. Since findfdt is getting
deprecated, move the rest of k3 platforms dependent on findfdt to
ti_set_fdt_env.
Populate fdtfile by calling ti_set_fdt_env in board files.
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
Introduce the basic files needed to support the TI J722S family of SoCs.
Co-developed-by: Vaishnav Achath <[email protected]>
Signed-off-by: Vaishnav Achath <[email protected]>
Signed-off-by: Jayesh Choudhary <[email protected]>
|
