| Age | Commit message (Collapse) | Author |
|---|
|
Updates to the JH7110 common description:
- add detailed overview of JH-7110 SoC and boot process
- revise descriptions of deprecated StarFive loader modes
- refresh build directions grouped with SPL debug advice
- reduce usage instructions into common methods shared by supported boards
- cite starfive_visionfive2 board maintainer description of StarFive loader
- cite published datasheets for ambient operating temperature data
Redundant/deprecated sections of each board doc are dropped accordingly:
- deepcomputing fml13v01
- milk-v mars
- pine64 star64 (also add inclusion of JH7110 common description)
- visionfive2
Signed-off-by: E Shattow <[email protected]>
|
|
This patch is not as E Shattow authored it, but contains non-trivial
changes from Heinrich Schuchardt as well. The original author has
requested that this commit be reverted until the changes can be
committed showing which parts were authored by E Shattow and which by
Heinrich Schuchardt.
This reverts commit 4c105d2ae7b0f847668ff1ef6b410f63ab4290b7.
Signed-off-by: Tom Rini <[email protected]>
|
|
Updates to the JH7110 common description:
- add detailed overview of JH-7110 SoC and boot process
- revise descriptions of deprecated StarFive loader modes
- refresh build directions grouped with SPL debug advice
- reduce usage instructions into common methods shared by supported boards
- cite starfive_visionfive2 board maintainer description of StarFive loader
- cite published datasheets for ambient operating temperature data
Redundant/deprecated sections of each board doc are dropped accordingly:
- deepcomputing fml13v01
- milk-v mars
- pine64 star64 (also add inclusion of JH7110 common description)
- visionfive2
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
To avoid duplicate maintenance just include jh7110_common.rst to describe
the usage of the different boot sources.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Always use ---- for the H2 level.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Currently in set_fdtfile() we set the value of environment variable fdtfile
unconditionally. The implies that a value in the environment will be
ignored.
With the patch environment variable fdtfile will only be set if it does not
yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set.
Now the user can either set and save fdtfile interactively or in the U-Boot
configuration to overrule the device-tree name chosen based on the
hardware in set_fdtfile().
Reported-by: E Shattow <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The rendering of the OpenSBI logo should look like the screen output.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.
Add some missing empty lines after titles.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The StarFive VisionFive 2 board cannot load spl/u-boot-spl.bin but needs a
prefixed header. We have referring to a vendor tool (spl_tool) for this
task. 'mkimage -T sfspl' can generate the prefixed file.
Use binman to invoke mkimage for the generation of file
spl/u-boot-spl.bin.normal.out.
Update the documentation.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
Since PLDA PCIE driver is added and VL805 support is enabled in
defconfig for Starfive Visionfive 2, modify the document to keep
consistent.
Signed-off-by: Shengyu Qu <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
Apply the trailing space changes in the guide document.
Signed-off-by: Chanho Park <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The defconfig file name for StarFive VisionFive2 has been changed, and
the documentation description has also changed.
Signed-off-by: Yanhong Wang <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The number of the partition that U-Boot SPL loads the main U-Boot from is
defined as 2 by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2. The
partition type GUID is not used currently.
Reword the description of the boot process to make it clearer.
Fixes: 5ecf9b0b8a75 ("board: starfive: add StarFive VisionFive v2 board support")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Support for the VisionFive 2 board is not contained in the most recent
OpenSBI release (v1.2).
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Add board support for StarFive VisionFive v2.
Signed-off-by: Yanhong Wang <[email protected]>
Tested-by: Conor Dooley <[email protected]>
|
