| Age | Commit message (Collapse) | Author |
|---|
|
As exposed by "make randconfig", CPU_MICROBLAZE uses select to
force-enable XILINX_MICROBLAZE0_PVR, but that symbol depends on
TARGET_MICROBLAZE_GENERIC. The select bypasses this dependency chain,
triggering a Kconfig warning:
WARNING: unmet direct dependencies detected for XILINX_MICROBLAZE0_PVR
Depends on [n]: MICROBLAZE [=y] && TARGET_MICROBLAZE_GENERIC [=n]
Selected by [y]:
- CPU_MICROBLAZE [=y] && CPU [=y] && MICROBLAZE [=y]
Change XILINX_MICROBLAZE0_PVR from select to depends on, so that the
CPU driver is only available when PVR support has been explicitly
enabled.
Fixes: 816226d27efa ("cpu: add CPU driver for microblaze")
Reported-by: Tom Rini <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/61ddd555f58ef5169c48b190423640d949e4aad1.1773764781.git.michal.simek@amd.com
|
|
Replace then -> they so that the sentence makes sense.
Signed-off-by: Hugo Villeneuve <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Fill the MADT table in the GIC driver and armv8 CPU driver to
drop SoC specific code. While the GIC only needs devicetree
data, the CPU driver needs additional information stored in
the cpu_plat struct.
While on it update the only board making use of the existing
drivers and writing ACPI MADT in mainboard code.
TEST: Booted on QEMU sbsa-ref using GICV3 driver model generated MADT.
Booted on QEMU raspb4 using GICV2 driver model generated MADT.
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Simon Glass <[email protected]>
|
|
Add a generic driver that binds to armv8 CPU nodes. The generic driver allows
- to enumerate CPUs present in a system, even when no other driver binds it
- generates ACPI SSDT code for each CPU
- Fill the ACPI MADT table (implemented in a follow up patch)
The newly introduced code could also be reused on other CPU drivers that are
compatible with armv8.
TEST: Booted on QEMU sbsa and verify the driver binds to CPU nodes.
Confirmed with FWTS that all ACPI processor devices are present.
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Simon Glass <[email protected]>
|
|
Implement various CPU related functions.
I'm actually just using it to get cpu clock frequency.
Tested-by: Max Filippov <[email protected]>
Signed-off-by: Jiaxun Yang <[email protected]>
|
|
Add CPU_IMX Kconfig
Support imx8_cpu driver for i.MX9
Signed-off-by: Peng Fan <[email protected]>
|
|
The event framework is just that, a framework. Enabling it by itself
does nothing, so we shouldn't ask the user about it. Reword (and correct
typos) around this the option and help text. This also applies to
DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be
visible to the user to select, when EVENT is selected.
With this, it's time to address the larger problems. When functionality
uses events, typically via EVENT_SPY, the appropriate framework then
must be select'd and NOT imply'd. As the functionality will cease to
work (and so, platforms will fail to boot) this is non-optional and
where select is appropriate. Audit the current users of EVENT_SPY to
have a more fine-grained approach to select'ing the framework where
used. Also ensure the current users of event_register and also select
EVENT_DYNAMIC.
Cc: AKASHI Takahiro <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Reported-by: Oliver Graute <[email protected]>
Reported-by: Francesco Dolcini <[email protected]>
Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")
Fixes: 42fdcebf859f ("event: Convert misc_init_f() to use events")
Fixes: c5ef2025579e ("dm: fix DM_EVENT dependencies")
Signed-off-by: Tom Rini <[email protected]>
Tested-by: Simon Glass <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Add a basic CPU driver that retrieves information about the microblaze CPU
core. cpu_ops handlers are implemented so that the "cpu" command can work
properly:
U-Boot-mONStR> cpu list
0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000
U-Boot-mONStR> cpu detail
0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000
ID = 0, freq = 50 MHz: L1 cache, MMU
Note: cpu_ver_lookup[] and family_string_lookup[] arrays were imported from
linux.
Signed-off-by: Ovidiu Panait <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
It looks quite weird that for non PPC platforms cpu driver for MPC83xx can
be selected. That's why define proper dependency.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
This adds a driver for RISC-V CPU. Note the driver will bind
a RISC-V timer driver if "timebase-frequency" property is
present in the device tree.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Lukas Auer <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add a CPU driver for the MPC83xx architecture.
Signed-off-by: Mario Six <[email protected]>
|
|
It is useful to be able to keep track of the available CPUs in a multi-CPU
system. This uclass is mostly intended for use with SMP systems.
The uclass provides methods for getting basic information about each CPU.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
