| Age | Commit message (Collapse) | Author |
|---|
|
This patch is used to add the imx type string of i.MX952 so that the
i.MX952 CPU info can be printed.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <[email protected]> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <[email protected]> #TI boards
Acked-by: Yao Zi <[email protected]> #TH1520
Signed-off-by: Peng Fan <[email protected]>
|
|
Linux kernel .get_temp() callback reports values in millicelsius,
U-Boot currently reports them in celsius. Align the two and report
in millicelsius. Update drivers accordingly. Update callsites that
use thermal_get_temp() as well.
The 'temperature' command now reports temperature in millicelsius
as well, with additional accuracy. This changes command line ABI
slightly.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: David Zang <[email protected]>
[trini: Update test/cmd/temperature.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
Add a case for i.MX94 to return the correct string identifier in the
get_imx_type_str() function. This ensures proper CPU type reporting for
i.MX94 platforms.
Signed-off-by: Alice Guo <[email protected]>
|
|
Add setting default temperatures to the weak version of
get_cpu_temp_grade so these values will not be used uninitialised.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
This patch is used to add the imx type string of i.MX95 ao that the
i.MX95 CPU info can be printed.
Signed-off-by: Alice Guo <[email protected]>
|
|
Much of the data that is display by imx8_cpu.c is also displayed from
arch/arm/mach-imx/cpu.c, except the temperature grade and active
temperature are only displayed when SoC is an i.MX9. Since IMX9 now
implies IMX_TMU, change this to check for IMX_TMU in the same way
it's done in mach-imx/cpu.c to enable displaying this information
for any SoC with either of this config enabled.
Since additional text may appear due to this commit, remove
the extra space in the message displaying the temperature
grade.
Before:
CPU: NXP i.MX8MP Rev1.1 A53 at 1200 MHz
Model: Beacon EmbeddedWorks i.MX8MPlus Development kit
After:
CPU: NXP i.MX8MP Rev1.1 A53 at 1200 MHz
CPU: Industrial temperature grade (-40C to 105C) at 28C
Model: Beacon EmbeddedWorks i.MX8MPlus Development kit
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
The imx8_cpu is capable of running on IMX8, IMX8M, and IMX9
families, but the CPU list is limited on the 8M variants. Expand
this list to show more variants and their respective names.
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
iMX91 is reduced part from iMX93 with part number: i.MX9131/11/01
It removed A55_1, M33, MIPI DSI, LVDS, etc.
i.MX9131:
- Support 2.4GT/s DDR and HWFFC at 1.2GT/s
i.MX9121:
- A55 at 800Mhz and DDR at 1600MTS, with low drive mode.
i.MX9111:
- Support 1.6GT/s DDR and HWFFC at 800MT/s
i.MX9101:
- Support 800Mhz ARM clock
- Support 1.6GT/s DDR and HWFFC at 800MT/s
- No parallel display, eQOS, flexcan
Updated Clock/Container/CPU and etc for i.MX91
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
U-Boot device tree is padded just after U-Boot proper.
After the whole stuff loaded to DRAM space, the device tree
area is conflict with BSS region before U-Boot relocation.
So any write to BSS area before reloc_fdt will corrupt the
device tree. Without the fix, there is issue that “binman_init
failed:-2” on i.MX8MP-EVK board.
Drop 'revision' and use malloc area in cpu_imx_plat->rev.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add support for iMX93 low performance parts 9302 and 9301 which
restrict to low drive voltage only.
The parts run A55 max speed at 900Mhz and M33 at 133Mhz, have NPU
and A55 core1 (9301) disabled.
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Release the secondary cores through the PSCI request.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Add i.MX 8M Mini, Nano and Plus SoCs support.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Return CPU description string without newline character in the end.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Increase one more bit to cover all CPU types. Otherwise it shows
wrong CPU info on some platforms, such as i.MX8M Plus:
U-Boot 2024.04+g674440bc73e+p0 (Jun 06 2024 - 10:05:34 +0000)
CPU: NXP i.MX8MM Rev1.1 A53 at 4154504685 MHz at 30C
Model: NXP i.MX8MPlus LPDDR4 EVK board
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
The cpu_freq stores the current CPU frequency in Hz.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
According to datasheet, iMX93 has fused parts with CORE1 or NPU or
both disabled. So update code to support it, the kernel device tree
runtime update will be added in future patches.
Signed-off-by: Peng Fan <[email protected]>
|
|
Support print out cpu grade temperature
Signed-off-by: Peng Fan <[email protected]>
|
|
Use CONFIG_DM_THERMAL to make the temperature function could be reused
by i.MX8 and i.MX9
Signed-off-by: Peng Fan <[email protected]>
|
|
Add CPU_IMX Kconfig
Support imx8_cpu driver for i.MX9
Signed-off-by: Peng Fan <[email protected]>
|
|
For local functions, use static for function.
Signed-off-by: Peng Fan <[email protected]>
|
|
Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Stefano Babic <[email protected]>
|
|
This function is also available as ofnode_is_enabled(), so use that
instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Try to maintain some consistency between these variables by using _plat as
a suffix for them.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this to be consistent with the change from 'platdata'.
Signed-off-by: Simon Glass <[email protected]>
|
|
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).
Rename some of the latter variables to end with 'plat' for consistency.
Signed-off-by: Simon Glass <[email protected]>
|
|
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.
Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.
Signed-off-by: Simon Glass <[email protected]>
|
|
These functions should not modify the device. Convert them to const so
that callers don't need to cast if they have a const udevice *.
Signed-off-by: Simon Glass <[email protected]>
|
|
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing
changes made to 56d37f1c564107e27d873181d838571b7d7860e7.
Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649
Signed-off-by: Tom Rini <[email protected]>
|
|
These functions should not modify the device. Convert them to const so
that callers don't need to cast if they have a const udevice *.
Signed-off-by: Simon Glass <[email protected]>
|
|
This fixes getting DT alert and critical pdata values in imx_scu_thermal
driver. On i.MX8QXP using not initialized alert pdata value resulted in
boot hang and endless loop outputting:
CPU Temperature (47200C) has beyond alert (0C), close to critical (0C) waiting...
While at it, preset CPU type values once to avoid multiple calls
of device_is_compatible() for same property.
Fixes: 3ee6ea443eb4 ("cpu: imx_cpu: Print the CPU temperature for iMX8QM A72")
Signed-off-by: Anatolij Gustschin <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
CPU type and rate detection is broken, for A35 cpu we get A53:
...
sc_pm_get_clock_rate: resource:0 clk:2: res:3
Could not read CPU frequency: -22
CPU: NXP i.MX8QXP RevB A53 at 0 MHz at 47C
Fixes: 55bc96f3b675 ("cpu: imx8: fix get core name and rate")
Signed-off-by: Anatolij Gustschin <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Move this uncommon header out of the common header.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.
Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add REVC informaiton.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
iMX8QM registers two thermal devices for CPUs, get the temperature
from "cpu-thermal1" device for A72
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
When current cpu is A53, using is_cortex_a53 could not detect A72
information, so check cpu device compatible property to get
the correct information.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Support booting i.MX8QM with A72 as boot cpu
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Return 4 is not correct on i.MX8DX/DXL/8QM and etc. we need to count
available cpu node with device_type "cpu".
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Move cpu desc code to cpu driver directory and name it imx8_cpu.c
No functional change.
Signed-off-by: Peng Fan <[email protected]>
|
