| Age | Commit message (Collapse) | Author |
|---|
|
The CAAM JR driver is initialized from arch_misc_init(). If
ARCH_MISC_INIT is not enabled, the driver is never initialized,
which can lead to crashes or hangs (e.g. during hash operations).
Select ARCH_MISC_INIT when enabling FSL_CAAM to ensure proper
initialization.
Signed-off-by: Heiko Schocher <[email protected]>
Suggested-by: Fabio Estevam <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
These drivers require various headers which only exist on the ARM /
PowerPC platforms which implement the hardware. Express that requirement
in Kconfig as well.
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Differentiate between "Enable Random Number Generator support" and
"Enable Random Number Generator support" in Kconfig entry, mark the
first as CAAM and the second as DCP, otherwise users cannot easily
decide which of the options is which and enable the correct one.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add SPL variant of SPL_FSL_CAAM_RNG so that the SPL_FSL_CAAM_RNG can
be disabled in SPL if necessary. This may be necessary due to e.g.
size constraints of the SPL.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add a new kconfig option to allow non-secure world access
to the CAAM Job Ring.
This is needed, for example, when running linux without
OP-TEE services, as it's done on Colibri iMX7.
Fixes: 51f1357f3428 ("Revert "drivers/crypto/fsl: assign job-rings to non-TrustZone"")
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all
default n/no options") and again sync is required.
default n/no doesn't need to be specified. It is default option anyway.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Svyatoslav Ryhel <[email protected]> # tegra
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Angelo Dureghello <[email protected]>
|
|
This commit introduces Random number generator to uboot. It uses DCP
driver for number generation.
RNG driver can be invoked by using below command on uboot prompt:-
rng <number of bytes>
Signed-off-by: Kshitiz Varshney <[email protected]>
Reviewed-by: Ye Li <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_SYS_FSL_MAX_NUM_OF_SEC
Signed-off-by: Tom Rini <[email protected]>
|
|
i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain <[email protected]>
Signed-off-by: Horia Geantă <[email protected]>
Reviewed-by: Ye Li <[email protected]>
|
|
added device tree support for job ring driver.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain <[email protected]>
Reviewed-by: Ye Li <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
calculate_hash() would try to select the appropriate hashing function
by a if/elseif contruct. But that is exactly why hash_lookup_algo()
exists, so use it instead.
This does mean that we now have to 'select HASH' to make sure we get
the hash_lookup_algo() symbol. However, the change makes sense because
even basic FITs will have to deal with "hash" nodes.
My only concern is that the 'select SPL_HASH' might cause some
platform to grow above its SPL size allowance
Signed-off-by: Alexandru Gagniuc <[email protected]>
[trini: Make FSL_CAAM be implied only on ARM && SPL]
Signed-off-by: Tom Rini <[email protected]>
|
|
Previous patch "MLK-18044-4: crypto: caam: Fix pointer size to 32bit
for i.MX8M" breaks the 64 bits CAAM.
Since i.MX CAAM are all 32 bits no matter the ARM arch (32 or 64),
to adapt and not break 64 bits CAAM support, add a new config
CONFIG_CAAM_64BIT and new relevant type "caam_dma_addr_t".
This config is default enabled when CONFIG_PHYS_64BIT is set except
for iMX8M.
Signed-off-by: Ye Li <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Register the random number generator with the rng subsystem in u-boot.
This way it can be used by EFI as well as for the 'rng' command.
Signed-off-by: Michael Walle <[email protected]>
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Priyanka Jain <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_HASH
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini <[email protected]>
|
|
Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it. Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool. In many cases we can select
these because they are required to implement other drivers. We also
correct how we include the various hashing algorithms in SPL.
This commit was generated as follows (after Kconfig additions):
[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL
Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.
Cc: Poonam Aggrwal <[email protected]>
Cc: Naveen Burmi <[email protected]>
Cc: Po Liu <[email protected]>
Cc: Shengzhou Liu <[email protected]>
Cc: Priyanka Jain <[email protected]>
Cc: Shaohui Xie <[email protected]>
Cc: Chunhe Lan <[email protected]>
Cc: Chander Kashyap <[email protected]>
Cc: Steve Rae <[email protected]>
Cc: Dirk Eibach <[email protected]>
Cc: Feng Li <[email protected]>
Cc: Alison Wang <[email protected]>
Cc: Sumit Garg <[email protected]>
Cc: Mingkai Hu <[email protected]>
Cc: York Sun <[email protected]>
Cc: Prabhakar Kushwaha <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Akshay Saraswat <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Jagan Teki <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Use Kconfig option to set little- or big-endian access to secure
boot and trust architecture.
Signed-off-by: York Sun <[email protected]>
|
|
Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
and ARM SoCs, move it to Kconfig under the driver.
Signed-off-by: York Sun <[email protected]>
|
|
Driver added for RSA Modular Exponentiation using Freescale Hardware
Accelerator CAAM. The driver uses UCLASS_MOD_EXP
Signed-off-by: Ruchika Gupta <[email protected]>
CC: Simon Glass <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
