summaryrefslogtreecommitdiff
path: root/drivers/fpga/Kconfig
AgeCommit message (Collapse)Author
2026-02-14Replace TARGET namespace and cleanup properlyTien Fong Chee
TARGET namespace is for machines / boards / what-have-you that building U-Boot for. Simply replace from TARGET to ARCH make things more clear and proper for ALL SoCFPGA. Signed-off-by: Brian Sune <[email protected]> Reviewed-by: Tien Fong Chee <[email protected]> # Conflicts: # drivers/ddr/altera/Makefile
2025-08-25fpga: lattice: Remove unused supportMichal Simek
There is no single platform which is using this driver that's why remove it completely. Some issues regarding this code are also reported by Coverity (CID 583143, 583144, 583145, 583146). Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/367cd55ab8d9fb262ac23fe748babc6b2b59bee0.1753686468.git.michal.simek@amd.com
2025-08-25fpga: Remove ancient ACEX1K supportMichal Simek
Coverity (CID 583149) reports issue on code which is not enabled by any real platform that's why remove it completely. Acked-by: Alexander Dahl <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/20fe425910b6266a2bf0555bda67f60c1dd3aa61.1753686468.git.michal.simek@amd.com
2025-07-24drivers: fpga: add Kconfig dependencyPieter Van Trappen
FPGA_SOCFPGA requires ARCH_SOCFPGA cause socfpga.c contains arch/arm/mach-socfpga/* include macros. Signed-off-by: Pieter Van Trappen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-03-09arm64: zynqmp: Add missing ZYNQMP_FIRMWARE dependenciesAlgapally Santosh Sagar
There are missing Kconfig dependencies in the code which is using firmware interface. The commit 71efd45a5fc7 ("arm64: zynqmp: Change firmware dependency") add option to also disable ZYNQMP_FIRMWARE. But not all Kconfig dependencies were properly described and also sdhci and gem drivers didn't protect the code properly. So, add the missing ZYNQMP_FIRMWARE dependencies. Signed-off-by: Algapally Santosh Sagar <[email protected]> Signed-off-by: Ashok Reddy Soma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-02-07fpga: Add a FPGA_STRATIX_II optionSimon Glass
There is no Kconfig option for this code, but it seems to be useful. Add one. Signed-off-by: Simon Glass <[email protected]>
2023-02-07fpga: Add a LATTICE optionSimon Glass
There is no Kconfig option for this code, but it seems to be useful. Add one. Signed-off-by: Simon Glass <[email protected]>
2023-01-20fpga: Migrate CONFIG_MAX_FPGA_DEVICES to KconfigTom Rini
This is always defined to 5, so use that as the default. Cc: Michal Simek <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Michal Simek <[email protected]>
2022-12-23Convert CONFIG_SYS_FPGA_CHECK_BUSY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FPGA_CHECK_BUSY Signed-off-by: Tom Rini <[email protected]>
2022-10-10fpga: Add missing Kconfig symbols for old FPGA driversAlexander Dahl
Those drivers could not be built anymore without those options present. Signed-off-by: Alexander Dahl <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-10-05dm: fpga: Introduce new uclassAlexander Dahl
For future DM based FPGA drivers and for now to have a meaningful logging class for old FPGA drivers. Suggested-by: Michal Simek <[email protected]> Suggested-by: Simon Glass <[email protected]> Signed-off-by: Alexander Dahl <[email protected]> Reviewed-by: Simon Glass <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2022-07-26fpga: add option for loading FPGA secure bitstreamsOleksandr Suvorov
It allows using this feature without enabling the "fpga loads" command. Signed-off-by: Oleksandr Suvorov <[email protected]> Co-developed-by: Adrian Fiergolski <[email protected]> Signed-off-by: Adrian Fiergolski <[email protected]> Tested-by: Ricardo Salveti <[email protected]> Tested-by: Adrian Fiergolski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2022-07-26fpga: Convert SYS_FPGA_PROG_FEEDBACK to KconfigAlexander Dahl
This converts the following to Kconfig: SYS_FPGA_PROG_FEEDBACK Signed-off-by: Alexander Dahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2022-07-26fpga: Convert SYS_FPGA_CHECK_CTRLC to KconfigAlexander Dahl
After commit 8cca60a2cbf2 ("Kconfig: Remove some symbols from the whitelist") downstream builds failed for boards setting this in include/configs/… Signed-off-by: Alexander Dahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2022-06-28Convert CONFIG_FPGA_STRATIX_V to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FPGA_STRATIX_V Signed-off-by: Tom Rini <[email protected]>
2021-03-08arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim
Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <[email protected]>
2020-10-09arm: socfpga: agilex: Enable FPGA Full Reconfiguration supportChee Hong Ang
Enable FPGA full reconfiguration support with Intel FPGA SDM Mailbox driver for Agilex. Signed-off-by: Chee Hong Ang <[email protected]> Reviewed-by: Ley Foon Tan <[email protected]>
2020-10-09fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM MailboxChee Hong Ang
Rename Stratix10 FPGA driver to Intel FPGA SDM Mailbox driver because it is using generic SDM (Secure Device Manager) Mailbox interface shared by other platform (e.g. Agilex) as well. Signed-off-by: Chee Hong Ang <[email protected]> Reviewed-by: Ley Foon Tan <[email protected]>
2019-10-08arm64: versal: fpga: Add PL bit stream load supportSiva Durga Prasad Paladugu
This patch adds PL bitstream load support for Versal platform. The PL bitstream is loaded by making an SMC to ATF which in turn communicates with platform firmware which configures and loads PL bitstream on to PL. Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2019-07-30fpga: virtex2: added Kconfig optionRobert Hancock
Add an option to allow this driver to be selected with Kconfig. As noted in the description, this driver should also work with many newer Xilinx FPGA families as the programming methods are essentially the same. Also added a missing FPGA_XILINX dependency to the similar Spartan 3 driver. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2018-12-20arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration DriverAng, Chee Hong
Enable FPGA reconfiguration support for Stratix 10 SoC. Signed-off-by: Ang, Chee Hong <[email protected]>
2018-09-11fpga: Kconfig: Replace spaces with tabsMichal Simek
Trivial Kconfig cleanup. Use tabs instead of spaces. Signed-off-by: Michal Simek <[email protected]>
2018-02-28arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPLVipul Kumar
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <[email protected]> Signed-off-by: Siva Durga Prasad Paladugu <[email protected]>
2018-02-28fpga: Added Kconfig support for FPGA_SPARTAN3Vipul Kumar
This patch added Kconfig support for FPGA_SPARTAN3 and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <[email protected]> Signed-off-by: Siva Durga Prasad Paladugu <[email protected]>
2017-07-26kconfig: Convert FPGA_SOCFPGA configuration to KconfigTien Fong Chee
This converts the following to Kconfig: CONFIG_FPGA_SOCFPGA Signed-off-by: Tien Fong Chee <[email protected]> Reviewed-by: Ley Foon Tan <[email protected]> Reviewed-by: Dinh Nguyen <[email protected]>
2016-12-16arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCPatrick Bruenn
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <[email protected]>
2016-09-22fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMPSiva Durga Prasad Paladugu
Add PL bitstream dowload support for ZynqMP Bitstream will be validated by uboot and loaded to PL by invoking an smc instruction to ATF which route this request to PMU FW which will take care of loading it to PL Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2016-09-22fpga: Add Kconfig to fpga subsystemMichal Simek
Add missing Kconfig to fpga subsystem to be able to add new options. Signed-off-by: Michal Simek <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-13 08:22:19 +0000