| Age | Commit message (Collapse) | Author |
|---|
|
U-Boot does not support modules, so having tristate options is useless.
Therefore this patch does a blind replace of all tristate options to
bool tree-wide.
Signed-off-by: Anshul Dalal <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Romain Gantois <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Restyle all Kconfigs for "i2c":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'
Signed-off-by: Johan Jonker <[email protected]>
|
|
The devm alloc functions that we have may follow the Linux kernel model
where allocations are (almost always) automatically free()'d. However,
quite often we don't enable, in full U-Boot, the tracking and free()'ing
functionality. This in turn leads to memory leaks because the driver
author expects that since the functions have the same name as in the
Linux Kernel they have the same behavior. In turn we then get
functionally correct commits such as commit 00e1fed93c8c ("firmware:
ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource") that manually
add these calls. Rather than manually tracking allocations and
implementing free()s, rework things so that we follow expectations by
enabling the DEVRES functionality (outside of xPL phases).
This turns DEVRES from a prompted symbol to a symbol that must be
select'd, and we now remove our non-managed alloc/free functions from
outside of xPL builds.
Reviewed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Add a driver for the PCA9541 i2c bus arbitrator based
on the Linux driver for the same device.
Co-developed-by: Jonathan Stroud <[email protected]>
Signed-off-by: Jonathan Stroud <[email protected]>
Signed-off-by: Padmarao Begari <[email protected]>
|
|
Add support for the following Maxim chips using the existing PCA954x
driver:
- MAX7356
- MAX7357
- MAX7358
- MAX7367
- MAX7368
- MAX7369
All added Maxim chips behave like the PCA954x, where a single SMBUS byte
write selects up to 8 channels to be bridged to the primary bus.
Tested using the MAX7358.
Signed-off-by: Maksim Kiselev <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
Tighten up symbol dependencies in a number of places. Ensure that a SPL
specific option has at least a direct dependency on SPL. In places
where it's clear that we depend on something more specific, use that
dependency instead. This means in a very small number of places we can
drop redundant dependencies.
Reported-by: Pali Rohár <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This adds the PCA9546 4-channel i2c bus switch.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
The PCA9543 is a 2-channel I2C switch.
Signed-off-by: Luca Ceresoli <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Acked-by: Michal Simek <[email protected]>
Reviewed-by: Heiko Schocher<[email protected]>
|
|
The Kconfig help has not been updated while adding PCA9547 and PCA9646.
Signed-off-by: Luca Ceresoli <[email protected]>
Acked-by: Michal Simek <[email protected]>
Reviewed-by: Heiko Schocher<[email protected]>
|
|
Replaced misspelled words "parition"/"paritioning" (missing 't') in two
Kconfig files by correct words "partition"/"partitioning"
Signed-off-by: Simon Goldschmidt <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>
|
|
Add an i2c mux driver providing access to i2c bus segments using a
hardware MUX sitting on a master bus and controlled through gpio pins.
E.G. something like:
---------- ---------- Bus segment 1 - - - - -
| | SCL/SDA | |-------------- | |
| |------------| |
| | | | Bus segment 2 | |
| Linux | GPIO 1..N | MUX |--------------- Devices
| |------------| | | |
| | | | Bus segment M
| | | |---------------| |
---------- ---------- - - - - -
SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M
according to the settings of the GPIO pins 1..N.
Note commit log from kernel
commit 92ed1a76("i2c: Add generic I2C multiplexer using GPIO API")
Signed-off-by: Peng Fan <[email protected]>
Tested-by: Peng Fan <[email protected]> (i.MX6QP-Sabreauto)
Cc: Heiko Schocher <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Simon Glass <[email protected]>
|
|
Add support for common TI i2c mux which is available on ZynqMP zcu102
board.
DM i2c mux core code is selecting/deselecting bus before/after
every command is performed that's why only one channel is active at a
time. That's also the reason why deselect is just disable all available
channels.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Since I2C muxes are seldom needed in SPL, and the code for this increases
the size somewhat, add a separate option to enable I2C muxes for SPL.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use tabs instead of space for indentation.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Fix typo in command description.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
While I2C supports multi-master buses this is difficult to get right.
The implementation on the master side in software is quite complex.
Clock-stretching and the arbitrary time that an I2C transaction can take
make it difficult to share the bus fairly in the face of high traffic.
When one or more masters can be reset independently part-way through a
transaction it is hard to know the state of the bus.
This driver provides a scheme based on two 'claim' GPIOs, one driven by the
AP (Application Processor, meaning the main CPU) and one driven by the EC
(Embedded Controller, a small CPU aimed at handling system tasks). With
these they can communicate and reliably share the bus. This scheme has
minimal overhead and involves very little code. It is used on snow to
permit the EC and the AP to share access to the main system PMIC and
battery. The scheme can survive reboots by either side without difficulty.
This scheme has been tested in the field with millions of devices.
Since U-Boot runs on the AP, the terminology used is 'our' claim GPIO,
meaning the AP's, and 'their' claim GPIO, meaning the EC's. This terminology
is used by the device tree bindings in Linux also.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new I2C_MUX uclass. Devices in this class can multiplex between
several I2C buses, selecting them one at a time for use by the system.
The multiplexing mechanism is left to the driver to decide - it may be
controlled by GPIOs, for example.
The uclass supports only two methods: select() and deselect().
The current mux state is expected to be stored in the mux itself since
it is the only thing that knows how to make things work. The mux can
record the current state and then avoid switching unless it is necessary.
So select() can be skipped if the mux is already in the correct state.
Also deselect() can be made a nop if required.
Signed-off-by: Simon Glass <[email protected]>
|
