| Age | Commit message (Collapse) | Author |
|---|
|
add function sc_misc_get_boot_type() which returns the
boot type.
Signed-off-by: Heiko Schocher <[email protected]>
Signed-off-by: Walter Schweizer <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
The ahab_commit command allows the user to commit into the SECO fuses
that control the SRK key revocation information. This is used to Revoke
compromised SRK keys.
To use ahab_commit, the boot container must be built with an SRK
revocation bit mask that is not 0x0. For the SPSDK provided by NXP, this
means setting the 'srk_revoke_mask' option in the config file used to
sign the boot container. The 'ahab_commit 0x10' can then be used to commit
the SRK revocation information into the SECO fuses.
Signed-off-by: John Ripple <[email protected]>
|
|
In sc_seco_secvio_dgo_config there is a check for data being NULL but
this occurs after data has already been dereferenced. All callers of the
function provide a valid pointer for data so no need for the NULL check.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
Driver for a PMIC watchdog timer controlled via Siemens SCU firmware
extensions. Only useful on some Siemens i.MX8-based platforms as
special SCFW is needed which provides the needed SCU API.
Signed-off-by: Andrej Valek <[email protected]>
Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add implementation of sc_pm_reset_reason() call for obtaining
reset reason.
Signed-off-by: Igor Opaniuk <[email protected]>
|
|
Upgrade SCFW API to 1.16
Add more APIs:
sc_misc_get_button_status
sc_pm_reboot
sc_seco_v2x_build_info
Signed-off-by: Peng Fan <[email protected]>
|
|
Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Stefano Babic <[email protected]>
|
|
SCFW has fixed a overflow issue in sc_rm_is_pad_owned API. This
requires u-boot to update API implementation, since it will cause
compatible issue. Otherwise all pad checking will have problem and
cause pad setting not continue.
Due to the compatible issue, the new u-boot only works with new
SCFW (API version: 1.21 and later).
old scfw + old u-boot: API overflow issue
old scfw + new u-boot, or new scfw + old u-boot: API compatible issue
new scfw + new u-boot: Working
Signed-off-by: Ye Li <[email protected]>
Reviewed-by : Jason Liu <[email protected]>
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Add SCFW API sc_misc_get_boot_container to get current boot container
set index.
The index value returns 1 for primary container set, 2 for secondary
container set.
Signed-off-by: Ye Li <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Add a module to configure the tamper and secure violation of
the SNVS using the SCU API.
The module also adds some commands:
- snvs_cfg: Configure the SNVS HP and LP registers
- snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP)
- tamper_pin_cfg: Change the configuration of the tamper pins
- snvs_clear_status: Allow to write to LPSR and LPTDSR to clear
status bits
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Franck LENORMAND <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Sync the latest SCFW API with below commit
6dcd0242ae7a53ac ("SCF-105: Revert accidental change") to add
interfaces for PM resource reset and read/write SNVS security
violation and tamper DGO registers.
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
SECO provides APIs to support CAAM manufacturing protection:
- sc_seco_get_mp_key()
- sc_seco_get_mp_sign()
- sc_seco_update_mpmr()
Add SCFW APIs support.
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Breno Lima <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.
Move the compatibility features into a separate header file.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.
Signed-off-by: Simon Glass <[email protected]>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <[email protected]>
|
|
Add more scfw api for clk/partition/seco usage
The api will be used by ccf/partition/secure boot.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add sc_pm_is_partition_started to check whether a partition
has been started. This will be used to detect M4 partition booted up or
not, then we could choose which dtb to use. If M4 is up, we need
use dtb, such as imx8qm-mek-rpmsg.dtb.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add sc_rm_set_master_sid to set stream sid of masters to make
sure they could use smmu.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add sc_misc_get_temp to support get temperature
Signed-off-by: Peng Fan <[email protected]>
|
|
When boot_dev is true, fill boot device. However the original logic is when
boot_dev is false, fill boot device, this will trigger data abort.
Also fix sc_misc_get_control when using pointer val.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add clk/misc/pad/pm/rm scfw api implementaion for different
drivers to invoke. The low level code is using misc_call
to invoke imx8_scu driver.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Anatolij Gustschin <[email protected]>
Cc: Stefano Babic <[email protected]>
|
