| Age | Commit message (Collapse) | Author |
|---|
|
The XSPI SET GMID command is used to assign GMID ownership to the
requester, allowing access to protected XSPI control registers. This API
must be called in SPL if XSPI GMID-protected settings need to be
modified. Otherwise, XSPI configuration depends on the previous GMID
owner to provide the correct settings.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
If CONFIG_CMD_FUSE is not enabled in imx93_11x11_evk_defconfig, then
compilation fails with various undefined references to 'fuse_read',
such as:
| .../arch/arm/mach-imx/imx9/soc.c:188:(.text.get_cpu_rev+0x38): undefined reference to `fuse_read'
therefore remove the 'fuse' command dependency in order to compile
fuse.c unconditionally to mitigate the issue.
Signed-off-by: Niko Mauno <[email protected]>
|
|
On GDET enabled part, need to call voltage change start and finish
APIs when adjust the voltage more than 100mv. Otherwise GDET will be
triggered and system is reset
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
When OSCCA is enabled, FSB fuse shadow (offset 0x8000)
access is disabled for SOC. So update the driver to read fuse
from ELE API. The ELE has supported to read all shadow fuses like
FSB, reuse the table of FSB for the word index used by ELE API.
Add ELE shadow fuse read and write to current ELE fuse driver.
But when LC is OEM closed, the ELE read/write shadow fuse APIs are
forbidden. Reading from any fuse will return error. This causes
problem to u-boot which must read out some fuse no matter whatever LC.
So we have to change back to read from FSB and ELE common fuse read API.
For using ELE shadow read API for development purpose like checking
the ELE shadow fuse write result, user can set env variable
"enable_ele_shd" to y to switch it.
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
There is a bug when checking fuse word with redundancy fuse in FSB
table. The redundancy fuses are combined into 4 words, so we can't
directly use word index to do the check, otherwise the high 4 words
will fail to match.
And When calling ELE API, res parameter will pass to ELE API to get ELE
response value for failure. So most of usage does not initialize
this variable and print it after calling ELE API.
However, when ELE API returns failure, we can't ensure this res is
always set because there may be other failure like MU failure.
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Add ELE APIs to support read and write shadow fuses
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
On iMX8ULP, the word index 1 is used to read OTP_UNIQ_ID with 4 words
data responsed. However this special index does not apply others.
So restrict the check to i.MX8ULP to avoid problem when reading from
fuse word 1 for others, such as i.MX93.
Also update header order
Signed-off-by: Peng Fan <[email protected]>
|
|
When OS is doing ELE API call, before OS get the response, OS is force
reseted, then it is possible that MU RR has data during initialization
in SPL stage. So clear the RR registers, otherwise SPL ELE API call will
work abnormal.
Cc: Alice Guo <[email protected]>
Cc: Marek Vasut <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
The MU parameter register can provide the TR and RR number.
For i.MX95 which has 8 RR is different with i.MX93 and i.MX8ULP,
so update the driver to read the PAR for exact TR and RR number.
Also update compatible string for i.MX95 ELE MU.
Cc: Alice Guo <[email protected]>
Cc: Marek Vasut <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
|
|
Add a new ahab_derive command that derives the hardware unique key (HUK)
into a 16 or 32 bytes key and stores it at the given address.
Signed-off-by: Mathieu Othacehe <[email protected]>
Reviewed-by: Ye Li <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
This message is used to commit into the fuses any new SRK revocation and
FW version information that have been found into the NXP (ELE FW) and
OEM containers.
Signed-off-by: Mathieu Othacehe <[email protected]>
|
|
On the imx8ulp A1 SoC, the ELE RNG needs to be manually started.
Signed-off-by: Clement Faure <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Extend the RX timeout value to 10s, because when authentication is failed
the ELE needs long time (>2s for 28M image) to return the result. Print
rx wait info per 1s.
Also correct TX and RX status registers in debug.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
According to SRM, the Sentinel MU has 8 TR and 4 RR registers. All
of them are used for ELE message. So update TR count to 8 and fix a
typo in receive msg
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
- Add crc computation.
- Add ele_generate_dek_blob API for encrypted boot support.
Signed-off-by: Clement Faure <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Add two ELE API: ele_return_lifecycle_update and ele_write_secure_fuse
Add two cmd: ahab_return_lifecycle and ahab_sec_fuse_prog
Signed-off-by: Peng Fan <[email protected]>
|
|
Per NXP requirement, we rename all the NXP EdgeLock Secure Enclave
code including comment, folder and API name to ELE to align.
Signed-off-by: Peng Fan <[email protected]>
|
