| Age | Commit message (Collapse) | Author |
|---|
|
Add support for QCS615 QUSB2 PHY by introducing platform-specific
initialization table and register layout. The implementation reuses
the IPQ6018 register layout and defines QCS615-specific tuning
parameters for proper USB PHY operation.
Taken from Linux commit 8adbf20e0502 ("phy: qcom-qusb2: Add support for QCS615")
Signed-off-by: Balaji Selvanathan <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This change is imported from Linux driver and tested with SM6125 SoC.
Note, the msm8996_phy_cfg struct is same as sdm660_phy_cfg but
qusb2_phy_cfg::se_clk_scheme_default differs only.
Signed-off-by: Biswapriyo Nath <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Recent addition of support for SDM660 inadvertently broke USB PHY power
on sequence on RB1/RB2 and others with following error:
starting USB...
Bus usb@4e00000: QUSB2PHY pll lock failed: status reg = 0
qcom-qusb2-phy phy@1613000: PHY: Failed to power on phy@1613000: -16.
Can't power on PHY0
probe failed, error -16
No USB controllers found
The root cause was the addition of flag se_clk_scheme_default which was
configured correctly for SDM660 but incorrect for all other supported
SoC. Fix that by properly assignment as per upstream Linux driver.
Fixes: 475497dc3c15 ("phy: Add SDM660 support to Qualcomm QUSB2 phy")
Signed-off-by: Sumit Garg <[email protected]>
Reviewed-by:
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Imported from Linux driver.
Note that already existing but previously unused member of
struct qusb2_phy::has_se_clk_scheme is now utilized for it's
purpose.
Signed-off-by: Alexey Minnekhanov <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
The Snapdragon 845 and several other Qualcomm SoCs feature this
USB high-speed phy. Add a driver for it based on the Linux driver, with
support for the SDM845, and the QCM2290 and SM6115 SoCs which will gain
support in U-Boot in future patches.
Signed-off-by: Bhupesh Sharma <[email protected]>
[code cleanup, switch to clk_bulk]
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
