| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a new Kconfig option PINCTRL_QCOM_GENERIC that, when selected,
enables all Qualcomm pinctrl drivers by default. This simplifies defconfigs
for platforms supporting multiple SoCs and avoids manual driver selection.
Individual drivers can still be disabled if required.
Signed-off-by: Aswin Murugan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add pinctrl driver for QCS615. Driver code is based on the
similar U-Boot and Linux drivers.
Signed-off-by: Aswin Murugan <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This SoC features a pinctrl block with north, south, and west tiles
accessible to the AP.
Signed-off-by: Danila Tikhonov <[email protected]>
Co-developed-by: Jens Reidel <[email protected]>
Signed-off-by: Jens Reidel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add support for TLMM pin controller block (Top Level Mode Multiplexer)
on SM6350 SoC, with support for special pins.
Correct pin configuration is required for working debug UART and eMMC/SD
cards.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
Add a pinctrl driver for the TLMM block found in the SDM670 SoC.
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the ipq5424 SoC.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add support for TLMM pin controller block (Top Level Mode
Multiplexer) on SDM630/660 SoCs, with support for special pins.
Correct pin configuration is required for working debug UART
and eMMC/SD cards.
SDM630 and SDM660 TLMM blocks are the same.
Signed-off-by: Alexey Minnekhanov <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl and GPIO driver for SA8775P. Driver code is based on the
similar U-Boot and Linux drivers.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
A copy-paste error is starting to get out of hand... Fix all these so
they don't look like clock drivers in menuconfig.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Introduce a pinctrl driver for SC7280/QCM6490, this is used by the RB3
Gen 2, FairPhone 5 and other devices.
Tested-by: Christopher Obbard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the ipq9574 SoC.
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the X1E80100 SoC.
Signed-off-by: Neil Armstrong <[email protected]>
Tested-by: Caleb Connolly <[email protected]> # Yoga Slim 7x
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl and GPIO driver for SM8150. Driver code is based on the
similar U-Boot drivers. All constants are taken from the corresponding
Linux driver. This drivers differs from the similar U-Boot drivers,
because SM8150 SoC have different function IDs for the same functions
on different pins.
Co-authored-by: Volodymyr Babchuk <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Julius Lehmann <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
IPQ4019 pinctrl driver was moved to the dedicated Qualcomm pinctrl
directory, but the KConfig depends on ARCH_SNAPDRAGON only and thus
PINCTRL_QCOM_IPQ4019 cannot be selected when ARCH_IPQ40XX is used.
Fixes: 24d2908e987a ("pinctrl: qcom: move ipq4019 driver from mach-ipq40xx")
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This SoC features a pinctrl block with north, south, and west tiles
accessible to the AP.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This SoC features a pinctrl block with west, east, and south tiles.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This SoC has a basic pinctrl block with no tiles.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the SM8650 SoC.
This driver only handles the gpio and qup2_se7 pinmux, and makes sure
the pinconf applies on SDC2 pins.
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the SM8550 SoC.
This driver only handles the gpio and qup1_se7 pinmux, and makes sure
the pinconf applies on SDC2 pins.
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Drop the duplicated pinctrl-snapdragon driver from mach-ipq40xx and add
it to drivers/pinctrl/qcom.
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Move the Qualcomm pinctrl drivers out of mach-snapdragon and over to the
rest of the pinctrl drivers, adjust the drivers so that support for each
platform can be enabled/disabled individually and introduce platform
specific configuration options.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
