| Age | Commit message (Collapse) | Author |
|---|
|
Add pinctrl driver for QCS615. Driver code is based on the
similar U-Boot and Linux drivers.
Signed-off-by: Aswin Murugan <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This SoC features a pinctrl block with north, south, and west tiles
accessible to the AP.
Signed-off-by: Danila Tikhonov <[email protected]>
Co-developed-by: Jens Reidel <[email protected]>
Signed-off-by: Jens Reidel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add support for TLMM pin controller block (Top Level Mode Multiplexer)
on SM6350 SoC, with support for special pins.
Correct pin configuration is required for working debug UART and eMMC/SD
cards.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
Add a pinctrl driver for the TLMM block found in the SDM670 SoC.
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the ipq5424 SoC.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add support for TLMM pin controller block (Top Level Mode
Multiplexer) on SDM630/660 SoCs, with support for special pins.
Correct pin configuration is required for working debug UART
and eMMC/SD cards.
SDM630 and SDM660 TLMM blocks are the same.
Signed-off-by: Alexey Minnekhanov <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl and GPIO driver for SA8775P. Driver code is based on the
similar U-Boot and Linux drivers.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Introduce a pinctrl driver for SC7280/QCM6490, this is used by the RB3
Gen 2, FairPhone 5 and other devices.
Tested-by: Christopher Obbard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the ipq9574 SoC.
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the X1E80100 SoC.
Signed-off-by: Neil Armstrong <[email protected]>
Tested-by: Caleb Connolly <[email protected]> # Yoga Slim 7x
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl and GPIO driver for SM8150. Driver code is based on the
similar U-Boot drivers. All constants are taken from the corresponding
Linux driver. This drivers differs from the similar U-Boot drivers,
because SM8150 SoC have different function IDs for the same functions
on different pins.
Co-authored-by: Volodymyr Babchuk <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Julius Lehmann <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
This SoC features a pinctrl block with north, south, and west tiles
accessible to the AP.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This SoC features a pinctrl block with west, east, and south tiles.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This SoC has a basic pinctrl block with no tiles.
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the SM8650 SoC.
This driver only handles the gpio and qup2_se7 pinmux, and makes sure
the pinconf applies on SDC2 pins.
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the SM8550 SoC.
This driver only handles the gpio and qup1_se7 pinmux, and makes sure
the pinconf applies on SDC2 pins.
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Drop the duplicated pinctrl-snapdragon driver from mach-ipq40xx and add
it to drivers/pinctrl/qcom.
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Move the Qualcomm pinctrl drivers out of mach-snapdragon and over to the
rest of the pinctrl drivers, adjust the drivers so that support for each
platform can be enabled/disabled individually and introduce platform
specific configuration options.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
