| Age | Commit message (Collapse) | Author |
|---|
|
Add pinctrl driver for RK3506.
Imported from vendor U-Boot linux-6.1-stan-rkr6 tag with adjustments
to use regmap_update_bits().
Signed-off-by: Ye Zhang <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Tested-by: Aaron Griffith <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add support for the rk3576 variant of pinctrl.
Signed-off-by: Steven Liu <[email protected]>
[adapted to mainline u-boot]
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add pinctrl driver for RK3528.
Imported from vendor U-Boot linux-6.1-stan-rkr5 tag with adjustments
to use regmap_update_bits().
Signed-off-by: Steven Liu <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add support for Rockchip rk3588 variant of pinctrl.
The driver is adapted from the Linux driver.
Signed-off-by: Jianqun Xu <[email protected]>
[[email protected]:
port to latest U-boot, bring more changes from Linux
use translated pull values table]
Signed-off-by: Eugen Hristev <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Tested-by: Jonas Karlman <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
|
|
Add driver supporting pin multiplexing on rk3568 platform.
Co-developed-by: Manoj Sai <[email protected]>
Signed-off-by: Manoj Sai <[email protected]>
Co-developed-by: Jianqun Xu <[email protected]>
Signed-off-by: Jianqun Xu <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add pinctrl driver for Rockchip RV1126.
Signed-off-by: Jianqun Xu <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add driver supporting pin multiplexing on rk3066 platform.
Signed-off-by: Paweł Jarosz <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
An iomux register contains 8 pins, each of which is represented
by 2 bits, but the register offset is 0x8.
For example, GRF_GPIO0A_IOMUX offset is 0x0, but GRF_GPIO0B_IOMUX
offset is 0x8, the offset 0x4 is reserved.
So add a type IOMUX_8WIDTH_2BIT to calculate offset.
Signed-off-by: David Wu <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add the necessary glue code to allow pinctrl setting on px30 socs.
Signed-off-by: David Wu <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Use this driver to fit all Rockchip SOCs and to support
the desired pinctrl configuration via DTS.
Signed-off-by: David Wu <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add rk3128 pinctrl driver and grf/iomux structure definition.
Signed-off-by: Kever Yang <[email protected]>
Acked-by: Philipp Tomsich <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>
|
|
Add init pinctrl driver support for:
- i2c;
- spi;
- uart;
- pwm;
- emmc/sdmmc;
Signed-off-by: Kever Yang <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>
|
|
Add pinctrl support for Rockchip rv1108 soc
Signed-off-by: Andy Yan <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add driver to support iomux setup for the most commonly
used peripherals on rk3368.
Signed-off-by: Andy Yan <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This originally started out as
"pinctrl: Kconfig: reorder to keep Rockchip options together"
and tried to keep the Rockchip-related config options together.
However, we now rewrite all chip-specific driver selections to start
with CONFIG_PINCTRL_ (with the inadvertent changes to related
Makefiles) and sort those alphabetically. And as this already means
touching most of the file, we also reformat the help text to not exceed
80 characters (but make full use of those 80 characters).
Signed-off-by: Philipp Tomsich <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Add rk3328 pinctrl driver and grf/iomux structure definition.
Signed-off-by: William Zhang <[email protected]>
Signed-off-by: Kever Yang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Add a driver which supports pin multiplexing setup for the most commonly
used peripherals.
Signed-off-by: Heiko Stuebner <[email protected]>
Acked-by: Simon Glass <[email protected]>
Tested-by: Kever Yang <[email protected]>
|
|
This patch add pinctrl driver for rk3399.
Signed-off-by: Kever Yang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Having some sort of ordering proofed helpful in a lot of other places
already. So for a larger number of rockchip socs it might be helpful
as well instead of an ever increasing unsorted list.
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Andreas Färber <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Rockchip socs are always named rkxxxx in all places, as also shown
by the naming of the rk3036 pinctrl file itself.
Therefore also name the config symbol according to this scheme.
Signed-off-by: Heiko Stuebner <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
The rk3288 pinctrl is very specific to this soc, so should
not hog the generic rockchip naming.
Signed-off-by: Heiko Stuebner <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Add a driver which support pin multiplexing setup for rk3036
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Add a driver which supports pin multiplexing setup for the most commonly
used peripherals.
Signed-off-by: Simon Glass <[email protected]>
|
