| Age | Commit message (Collapse) | Author |
|---|
|
This commit implements SMBIOS Type 16 (Physical Memory Array)
generation with a hybrid approach supporting both:
1. Explicit definition via Device Tree 'smbios' node:
Child node under '/smbios/smbios/memory-array' will be used to
populate as individual Type 16 structure directly.
- Properties follow SMBIOS field names with lowercase letters and
hyphen-separated words (e.g., 'memory-error-correction',
'maximum-capacity', 'extended-maximum-capacity', etc.).
- This method supports precise platform-defined overrides and system
descriptions.
2. Fallback to automatic DT-based discovery:
If child node under '/smbios/smbios/memory-array' does not exist,
the implementation will:
- Scan all top-level 'memory@' nodes to populate Type 16 structure with
inferred size and location data.
- Scan nodes named or marked as 'memory-controller' and parse
associated 'dimm@' subnodes (if present) to extract DIMM sizes and
map them accordingly.
This dual-mode support enables flexible firmware SMBIOS reporting while
aligning with spec-compliant naming and runtime-detected memory topology.
Type 16 support is under GENERATE_SMBIOS_TABLE_VERBOSE to avoid
increasing rom size for those platforms which only require basic SMBIOS
support.
Signed-off-by: Raymond Mao <[email protected]>
Tested-by: Ilias Apalodimas <[email protected]>
|
|
This brings a sysinfo driver and DT entry for the IOT2050 board series.
It translates the board information passed from SE-Boot to SPL into
values that can be retrieved via the sysinfo API. Will is already used
to fill the SMBIOS table when booting via EFI.
Signed-off-by: Baocheng Su <[email protected]>
Signed-off-by: Li Hua Qian <[email protected]>
[Jan: split-off as separate patch, cleanup]
Signed-off-by: Jan Kiszka <[email protected]>
|
|
This commit introduces a new API to the sysinfo module, allowing access
to data elements. This is particularly useful for handling data with
multiple instances, such as MAC addresses.
Signed-off-by: Baocheng Su <[email protected]>
|
|
Add sysinfo driver to retrieve smbios information (Type 4 and 7).
So that the smbios library can use it for getting values from the
hardware platform instead of device tree.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Adding sysinfo_get_data into sandbox ut test dm_test_sysinfo.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Add interface for sysinfo to access a data area from the platform.
This is useful to save/read a memory region of platform-specific
data.
Signed-off-by: Raymond Mao <[email protected]>
|
|
We are about to add a large number of new entries. Update the prefix to
be a little shorter.
For SMBIOS items, use SYSID_SM_ (for System Management) which is enough
to distinguish it. For now at least, it seems that most items will be
for SMBIOS.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Raymond Mao <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
At present only the model name is shown on start. Some boards want to
display more information. Add some more options to allow display of the
manufacturer as well as the version and date of any prior-stage
firmware.
This is useful for coreboot, at least. If other boards have more
information to display, it is easy to add it, now.
Signed-off-by: Simon Glass <[email protected]>
|
|
There can certainly be a lot more elements in the "revisions" (and
"names") arrays than there are gpios used to form the trinary number
we're searching for; we simply don't know the array size up-front.
Nor do we need to, because the loop body already knows to recognize
-EOVERFLOW as "not that many elements present" (and we have a test
that specifically ensures that dev_read_u32_index() returns exactly
that). So just drop the i < priv->gpio_num condition.
While in here, fix the weird placement of the default: keyword.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
|
|
Add new sysinfo IDs for R-Car V3H Condor/Condor-I .
Enable support for sysinfo on R-Car V3H Condor/Condor-I. The sysinfo is
used e.g. to access and decode board-specific information and then in
turn used by board-info to print those information.
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tam Nguyen <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
[Marek: Drop compatible from I2C node, this is in r8a77980.dtsi already.
Drop status = "okay" from EEPROM node.
Add dts: tag.
Update the commit message, note the new sysinfo IDs.
Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
|
|
Correct the board code ID based on the hardware documentation
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tam Nguyen <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Clarify documentation, fix a few more cases that could be broken by the
change.
Signed-off-by: Michal Suchanek <[email protected]>
|
|
The Renesas R-Car Gen3 development kits contain board ID EEPROM.
This driver parses out the board ID and revision out of that
EEPROM and exports it e.g. for the board-info print on boot.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Sean Anderson <[email protected]>
Cc: Simon Glass <[email protected]>
|
|
Define LOG_CATEGORY for all uclass to allow filtering with
log command.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This uses the newly-added dm_gpio_get_values_as_int_base3 function to
implement a sysinfo device. The revision map is stored in the device tree.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This has the uclass enforce calling detect() before other methods. This
allows drivers to cache information in detect() and perform (cheaper)
retrieval in the other accessors. This also modifies the only instance
where this sequencing was not followed.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Since 07c9e683a4 ("smbios: Allow a few values to come from sysinfo")
there are common global sysinfo IDs. This patch moved existing IDs above
SYSINFO_ID_USER.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.
Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some boards want to specify the manufacturer or product name but do not
need to have their own sysinfo driver.
Add a default driver which provides a way to specify this SMBIOS
information in the devicetree, without needing any board-specific
functionality.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This uclass is intended to provide a way to obtain information about a
U-Boot board. But the concept of a U-Boot 'board' is the whole system,
not just one circuit board, meaning that 'board' is something of a
misnomer for this uclass.
In addition, the name 'board' is a bit overused in U-Boot and we want to
use the same uclass to provide SMBIOS information.
The obvious name is 'system' but that is so vague as to be meaningless.
Use 'sysinfo' instead, since this uclass is aimed at providing information
on the system.
Rename everything accordingly.
Note: Due to the patch delta caused by the symbol renames, this patch
shows some renamed files as being deleted in one place and created in
another.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
