| Age | Commit message (Collapse) | Author |
|---|
|
The logic for how to handle this video driver is slightly odd. Only in
the case of when CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 is
enabled do we need to have this file built, and otherwise we have a
dummy function in use. Correct the logic by only building this file when
needed.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is unused. Remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add support for PWM backlight found in Samsung CMC623 image converter.
Signed-off-by: Ion Agorria <[email protected]>
Reviewed-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Samsung S6E63M0 controller is found in some OLED panels like one used in
the Samsung Captivate Glide. Currently only DBI C panel is implemented.
Signed-off-by: Ion Agorria <[email protected]>
Reviewed-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Sony L4F00430T01 LCD module is found in Samsung Galaxy R. The panel has a
WVGA resolution (480x800) and is setup over SPI, video data comes from RGB.
Signed-off-by: Ion Agorria <[email protected]>
Reviewed-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for Skyworks AAT2870 LED Backlight Driver and Multiple LDO
Lighting Management Unit. Only backlight is supported as for now. Supported
backlight level range is from 2 to 255 with step of 1.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
LG LH400WV3-SD04 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Hitachi TX10D07VM0BAA is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
[backport from Linux commits 9b26d5c044d6a29ebfb1845408e0f2a7c5f89818
and 219a1f49094f50bf9c382830d06149e677f76bed]
The patch adds the FRIDA FRD400B25025-A-CTK panel, which belongs to the
Novatek NT35510-based panel family.
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
The LM3532 is a 500-kHz fixed frequency asynchronous boost converter which
provides the power for 3 high-voltage, low-side current sinks. The device
is programmable over an I2C-compatible interface and has independent
current control for all three channels.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for the LCD panel module used in Motorola Atrix 4G or Droid X2.
Exact panel vendor and model are unknown. The panel has a 540x960 (qHD)
resolution and uses 24 bit RGB per pixel.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Place Tegra124 SOR and eDP implenetation into common Tegra driver folder
until it is integrated into existing setup.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Since this set of drivers suports four Tegra SoC generations, lets name it
just 'tegra'.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
|
|
Tom Rini <[email protected]> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/[email protected]
|
|
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <[email protected]>
|
|
The IPUv3 is one IP part of the imx world, there are others, and
selecting the whole imx/ folder based on such a specific Kconfig symbol
is sub-optimal. Let's always enter the imx/ folder, and then selectively
compile parts of the folder based on the configuration.
Signed-off-by: Miquel Raynal <[email protected]>
|
|
This module is a color active matrix LCD module incorporating
Oxide TFT (Thin Film Transistor). It is composed of a color TFT-LCD
panel, driver ICs, a control circuit and power supply circuit, and
a backlight unit. Graphics and texts can be displayed on a 1536x2048
dots panel with (16,777,216) colors by using MIPI DUAL DSI interface,
supplying +3.3V DC supply voltage for TFT-LCD panel driving and
supplying DC supply voltage for LED Backlight.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for National Semiconductor/TI LP8550/1/2/3/5/6/7
LED Backlight. Driver is based on Linux version but is
reworked and optimised for U-Boot DM framework. Currently
only register driven backlight control is supported, PWM
driver backlight control may be added later if needed.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <[email protected]>
|
|
This module is a color active matrix LCD module incorporating
Oxide TFT (Thin Film Transistor). It is composed of a color TFT-LCD
panel, driver ICs, a control circuit and power supply circuit, and
a backlight unit. Graphics and texts can be displayed on a 2560×1600
dots panel with (16,777,216) colors by using MIPI DUAL DSI interface,
supplying +3.3V DC supply voltage for TFT-LCD panel driving and
supplying DC supply voltage for LED Backlight.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <[email protected]>
|
|
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.
Signed-off-by: Simon Glass <[email protected]>
|
|
LTL106HL02 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD) that uses amorphous silicon TFT as
switching devices. This model is composed of a TFT LCD panel, a
driver circuit and a backlight unit. The resolution of a 10.6"
contains 1920 x 1080 pixels and can display up to 16,8M color
with wide viewing angle.
Co-developed-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Jonas Schwöbel <[email protected]>
Co-developed-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Anton Bambura <[email protected]>
|
|
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with
an integral Light Emitting Diode (LED) backlight system. The
matrix employs a-Si Thin Film Transistor as the active element. It
is a transmissive type display operating in the normally Black
mode. This TFT-LCD has 7.0 inches diagonally measured active
display area with WXGA resolution (800 by 1280 pixel array).
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
This relates to graphics which is only active when CONFIG_VIDEO is
enabled. Move it into that directory.
For most boards there is no harm in compiling it always, since it if not
used it will be dropped by the linker. But for the EFI app this is not
the case, so retain use of the BMP Kconfig.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
- bootstd: Add a bootmeth for ChromiumOS on x86
- x86: Use qemu-x86_64 to boot EFI installers
|
|
Bochs is convenient with QEMU on x86 since it does not require a video
BIOS. Add a driver for it.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The driver is for panels based on the Himax HX8394 controller, such as the
HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
This panel is used in Pinephone Pro.
Signed-off-by: Ondrej Jirman <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
|
|
Place zynqmp files and headers in custom driver subdirectory.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/9aae6d217f0673c310818e3de38bb239c79c060c.1684312924.git.michal.simek@amd.com
|
|
Family of panels used by HTC in One X. Though were used variants
at least from 3 vendors, this driver provides generic support for
all of them.
Tested-by: Ion Agorria <[email protected]> # HTC One X T30 Sony
Tested-by: Svyatoslav Ryhel <[email protected]> # HTC One X T30 Sharp
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Driver adds support for panels with Renesas R69328 IC
Currently supported compatible is:
- jdi,dx12d100vm0eaa
Tested-by: Andreas Westman Dorcsak <[email protected]> # LG P880 T30
Tested-by: Svyatoslav Ryhel <[email protected]> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
R61307 is liquid crystal driver for high-definition
amorphous silicon (a-Si) panels and is ideal for
tablets and smartphones.
Supported compatibles are:
- koe,tx13d100vm0eaa
- hitachi,tx13d100vm0eaa
Tested-by: Andreas Westman Dorcsak <[email protected]> # LG P880 T30
Tested-by: Svyatoslav Ryhel <[email protected]> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This is basic lm3533 driver only with bank A and backlight cell
support.
Tested-by: Andreas Westman Dorcsak <[email protected]> # LG P880 T30
Tested-by: Svyatoslav Ryhel <[email protected]> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
To enable TIDSS driver only at SPL stage add rule to compile the TIDSS
video driver.
CONFIG_$(SPL_)VIDEO_TIDSS will compile tidss_drv, at SPL only if
CONFIG_SPL_VIDEO_TIDSS is defined and at u-boot proper if
CONFIG_VIDEO_TIDSS is defined.
Signed-off-by: Nikhil M Jain <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
To enable video driver at SPL, need to compile video-uclass,
vidconsole-uclass, backlight-uclass, panel-uclass, simple-panel, add
rules to compile them at SPL and u-boot proper. To support
splash_display at SPL, need to compile video-bmp, add rule to compile at
SPL and u-boot proper.
Signed-off-by: Nikhil M Jain <[email protected]>
Reviewed-by: Devarsh Thakkar <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]>
|
|
Move tegra dc driver to tegra20 directory and also mention
T30 in description of the driver's config option.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
[agust: add commit description]
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
- move common code to vidconsole_internal.h and console_core.c
- unite probe functions
- get rid of code duplications in switch across bpp values
- extract common pixel fill logic in two functions one per
horizontal and vertical filling
- rearrange statements in put_xy* methods in unified way
- replace types - uint*_t to u*
Signed-off-by: Dzmitry Sankouski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This is not used since this commit:
76386d6195a arm: Remove cm_t35 board
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not used since this commit:
3cf02f5ffa4 imx6: remove not longer supported aristainetos boards
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass <[email protected]>
|
|
Added tidss video driver support which enables display
on oldi panel using AM62x, it creates a simple pipeline
framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and
calculates clock rates for panel from panel node in
device tree.
To compile TIDSS when user sets CONFIG_VIDEO_TIDSS
add rule in Makefile. Include tidss folder location
in Kconfig.
TIDSS is ported from linux kernel version 5.10.145
Signed-off-by: Nikhil M Jain <[email protected]>
|
|
The commit 82f7b869f5d7a ("video: Drop CONFIG_AM335X_LCD") removed not
only the LCD legacy implementation but also the code with driver model
support. The patch restores the code with driver model support.
Fixes: 82f7b869f5d7a ("video: Drop CONFIG_AM335X_LCD")
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Now that all the old code is gone, rename this option. Driver model
migration is now complete.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not used anymore. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This relies on the old LCD implementation which is to be removed. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This relies on the old LCD implementation which is to be removed. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is actually a panel, not a video device. Rename the option, move it
into the right place and make it depend on PANEL.
Signed-off-by: Simon Glass <[email protected]>
|
|
With the last platform for this architecture removed, remove the rest of
the architecture support as well.
Cc: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Since bb5930d5c97f ("exynos: video: Convert several boards to driver
model for video") there have been no callers of any of the exynos_lcd_*
family of functions. Remove these from the boards, and then remove
unused logo and related code as well.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Minkyu Kang <[email protected]>
|
|
This is not used. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This does not use driver model and is more than two years past the
migration date. Drop it.
It can be added back later if needed.
Signed-off-by: Simon Glass <[email protected]>
|
