| Age | Commit message (Collapse) | Author |
|---|
|
With the last platform for this architecture removed, remove the rest of
the architecture support as well.
Cc: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This removes a number of spots of dead code based on symbols that start
with CONFIG_[0-9] or CONFIG_A.
Signed-off-by: Tom Rini <[email protected]>
|
|
Move this header out of the common header.
Signed-off-by: Simon Glass <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
This reverts commit 59deb7fe8d23c8ec2b659d99323ec4a2ec19148a.
Signed-off-by: Tom Rini <[email protected]>
|
|
This reverts commit 3bc8ffd9cb774feceefc7bdebe9353fcea071343.
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Vasily Khoruzhick <[email protected]>
|
|
Signed-off-by: Vasily Khoruzhick <[email protected]>
|
|
z2's screen is rotated by 270 degrees
Signed-off-by: Vasily Khoruzhick <[email protected]>
Acked-by: Marek Vasut <[email protected]>
|
|
Cleaning up order of include files by sorting them alphabetically
keeping in mind to leave common.h on top.
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
Various files are needlessly rebuilt every time due to the version and
build time changing. As version.h is not actually needed, remove the
include.
Signed-off-by: Rob Herring <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Minkyu Kang <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Tom Warren <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Macpaul Lin <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: York Sun <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Philippe Reynes <[email protected]>
Cc: Eric Jarrige <[email protected]>
Cc: "David Müller" <[email protected]>
Cc: Phil Edworthy <[email protected]>
Cc: Robert Baldyga <[email protected]>
Cc: Torsten Koschorrek <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Łukasz Majewski <[email protected]>
|
|
configuration_get_cmap() is multiple platform-specific functions stuffed into
one function. Split it into multiple versions, and move each version to the
appropriate driver to reduce the #ifdef complexity.
Signed-off-by: Nikita Kiryanov <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Bo Shen <[email protected]>
Tested-by: Josh Wu <[email protected]>
Cc: Bo Shen <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
|
|
No one is using LCD_MONOCHROME; remove related code.
Signed-off-by: Nikita Kiryanov <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
Make lcd_init() a weak pointer so that boards can overload it if necessary. The
palmtreo680 board needs to wiggle some gpios and configure the pwm controller in
order to get the lcd and its backlight working.
Signed-off-by: Mike Dunn <[email protected]>
|
|
This adds the definitions required to support the LCD device on the Palm Treo
680.
Signed-off-by: Mike Dunn <[email protected]>
|
|
cc: Anatolij Gustschin <[email protected]>
cc: Cliff Brake <[email protected]>
cc: John Zhan <[email protected]>
cc: Marek Vasut <[email protected]>
cc: Wolfgang Denk <[email protected]>
Signed-off-by: Jeroen Hofstee <[email protected]>
|
|
lcd_base is available as gd->fb_base as well, there is no need
to keep a seperate copy.
For completeness the ack of Bo Shen is for the atmel part.
Cc: Alessandro Rubini <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: Bo Shen <[email protected]>
Cc: Haavard Skinnemoen <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Minkyu Kang <[email protected]>
Cc: Nikita Kiryanov <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Stelian Pop <[email protected]>
Cc: Tom Warren <[email protected]>
Acked-by: Bo Shen <[email protected]>
Signed-off-by: Jeroen Hofstee <[email protected]>
[agust: also fix cm_t35 board while rebasing]
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
console_col, console_row, lcd_line_length, lcd_console_address had
to be declared in board / driver specific code, but were not actually
used there on many boards. Get rid of the global variables.
for completeness, the ack of Bo Shen is for the atmel part
Cc: Alessandro Rubini <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: Bo Shen <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Minkyu Kang <[email protected]>
Cc: Nikita Kiryanov <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Stelian Pop <[email protected]>
Cc: Tom Warren <[email protected]>
Acked-by: Bo Shen <[email protected]>
Signed-off-by: Jeroen Hofstee <[email protected]>
[agust: rebased and fixed cm_t35 board]
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
Since the lcd code was compiled unconditionally for pxa also add
CONFIG_PXA_LCD to the boards using this framebuffer. Since
driver/video contains video and lcd drivers, add lcd to the name
to make clear it belongs to common/lcd.c.
cc: Anatolij Gustschin <[email protected]>
cc: Cliff Brake <[email protected]>
cc: Marek Vasut <[email protected]>
Acked-by: Marek Vasut <[email protected]>
Signed-off-by: Jeroen Hofstee <[email protected]>
|
