| Age | Commit message (Collapse) | Author |
|---|
|
This patch add support to read register base address by name if
provided.
Also devfdt_get_addr_* is changed to dev_read_addr_* to support DT
live tree.
Signed-off-by: Weijie Gao <[email protected]>
|
|
The reg-names in mt7988.dtsi have no _base suffix. Remove the suffix
will also make it match upstream linux format.
Fixes: 8c2cb748ef5 (pinctrl: mediatek: mt7988: rename reg-names to upstream linux format)
Signed-off-by: Weijie Gao <[email protected]>
|
|
Heiko Schocher <[email protected]> says:
In linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This series adds support for parsing this properties if there
is no label property.
Link: https://lore.kernel.org/r/[email protected]
[trini: Document name parameter in led.h]
|
|
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2025.04-rc2
fpga:
- Cleanup help
- Show xilinx only options on Xilinx devices
ospi-versal:
- Fix alignment issue
- Fix cadence_qspi_flash_reset() prototype
zynqmp:
- Define usb_pgood_delay
- Fix bootseq number
versal:
- Fix mini_ospi configuration
versal2:
- Enable OPTEE
xilinx:
- Enable some flashes
- Clean up SYS_MALLOC_F_LEN Kconfig
- Some binman fixes
- DT updates
- Enable mkfwumdata compilation
- Enable meminfo command
- Switch to LWIP and enable HTTPS
|
|
The current behaviour of this function will dereference a null pointer
if the serial# environment variable is unset. This was discovered on a
board where U-Boot did not have access to the first 256MB of ram,
resulting in a board crash.
In the event that U-Boot has full access to memory, it will still read
from address 0, which is probably not optimal.
This simple check is enough to fix it
Signed-off-by: Michael Ferolito <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Kyungmin Park <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Fixes annoying warnings of the following type when built with W=1 (for
each file including fpga.h):
CC drivers/fpga/fpga.o
In file included from /mnt/data/adahl/src/u-boot/include/xilinx.h:7,
from /mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:10:
/mnt/data/adahl/src/u-boot/include/fpga.h:61:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
61 | const fpga_desc *const fpga_get_desc(int devnum);
| ^~~~~
/mnt/data/adahl/src/u-boot/include/fpga.h:81:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
81 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:36:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
36 | const fpga_desc *const fpga_get_desc(int devnum)
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:53:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
53 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
Do some type and cast cleanup on that fpga_desc type while at it.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wignored-qualifiers
Signed-off-by: Alexander Dahl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Add missing prototype to fix the sparse warning,
warning: no previous prototype for 'cadence_qspi_flash_reset'
[-Wmissing-prototypes].
Fixes: 6d234a79e9 ("cadence_qspi: Refactor the flash reset functionality")
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
If the least significant bit of the address is set to one when
using the DDR protocol for data transfer then the results are
indeterminate for few flash devices. To fix this the least
significant bit of the address is set to zero.
Signed-off-by: Padmarao Begari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Update the debug() print, use __func__ to always print matching
function name, and also print bus name in case there are multiple
busses.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Replace ifdeffery with plain debug() function call. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Explicitly flush icache on the CR52 core before jumping to the next
stage software to make sure it does not contain any invalid content.
Explicitly flash and invalidate dcache on the CA76 core both over the
trampoline buffer and over the CR52 firmware, and then trigger full
system synchronization, to make sure the data surely land in DRAM,
from where the CR52 can surely pick them up.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Christian Marangi <[email protected]> says:
This is the last batch of part to push actual support of
OF_UPSTREAM for the mediatek SoC.
The plan is to make the current downstream DTS on part with
upstream implementation so we can permit a gradual transition to
it while we don't cause any regression to any user.
This is to have the same node downstream and upstream.
Mediatek is working hard upstream to also push all the remaining
nodes.
All patch are the final changes after the pinctrl patch
merged previously.
All patch pass CI tests
Link: https://github.com/u-boot/u-boot/pull/731
Link: https://lore.kernel.org/r/[email protected]
|
|
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Weijie Gao <[email protected]>
Tested-by: Weijie Gao <[email protected]>
|
|
VPL may want to use driver model for MMC even if TPL does not. Update
the rule in this driver to support that.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Use the driver macros so that the driver appears in the
linker list.
Reported-by: Simon Glass <[email protected]>
Fixes: 732f01aabf53 ("pinctrl: starfive: Add StarFive JH7110 driver")
Signed-off-by: Hal Feng <[email protected]>
Reviewed-by: Anand Moon <[email protected]>
|
|
This patch fixed the following coding style suggested by checkpatch.pl:
1. Use tab instead of space
2. Use BIT() instead of <<
3. Use mdelay for long time delay
4. Remove useless parenthesises
Signed-off-by: Weijie Gao <[email protected]>
|
|
Update mt7981 pinctrl driver based on upstream kernel
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
The SCSI specification originally required that the second
Command Data Byte contain the LUN value in its high-order bits,
but this field has been marked as reserved since the SCSI-3 spec
from 1996.
Some vendors uses this byte to pass vendor specific data,
and specifying the LUN can trigger strange behaviors.
For the record, this happened on an UFS device where LUN0 was
working perfectly and reading the other LUNs would get the last
buffer data that was read for LUN0, making this issue very very
hard to debug.
It's sane to assume U-Boot will probably never encounter
an SCSI-2 multi-LUN device, if somehow it happens the enquiry
command would need to get the SCSI level to handle this case.
The Linux fix was added in [1] to fix the exact same issue.
[1] https://lore.kernel.org/all/[email protected]/
Signed-off-by: Neil Armstrong <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm
STM32 MPU:
- Remove dt-bindings headers available in dts/upstream
- Fixes for stm32prog
- Enable CONFIG_SYS_64BIT_LBA for STM32MP15/13/25 defconfigs
- Add upport of ck_usbo_48m in pre-reloc stage for STM32MP13
- Clean env_get_location() for STM32MP1
- Fix board_get_usable_ram_top() to fix infinite loop in cache
management for STM32MP2.
- Fix ck_flexgen_08 frequency for STM32MP2
STM32 MCU:
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F469-Disco
- Tune CYCLIC_MAX_CPU_TIME_US to avoid cyclic warning for STM32F769-Disco
|
|
If CONFIG_SYS_64BIT_LBA is enable, following compilation warning is
triggered:
CC drivers/fastboot/fb_mmc.o
../drivers/fastboot/fb_mmc.c: In function 'fb_mmc_erase_mmc_hwpart':
../drivers/fastboot/fb_mmc.c:215:35: warning: format '%lu' expects
argument of type 'long unsigned int', but argument 2 has type
'long long unsigned int' [-Wformat=]
215 | printf("........ erased %lu bytes from mmc hwpart[%u]\n",
| ~~^
| |
| long unsigned int
| %llu
216 | dev_desc->lba * dev_desc->blksz, dev_desc->hwpart);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
../drivers/fastboot/fb_mmc.c: In function 'fb_mmc_boot_ops':
../drivers/fastboot/fb_mmc.c:261:42: warning: format '%lu' expects
argument of type 'long unsigned int', but argument 2 has type
'long long unsigned int' [-Wformat=]
261 | printf("........ wrote %lu bytes to EMMC_BOOT%d\n",
| ~~^
| |
| long unsigned int
| %llu
262 | blkcnt * blksz, hwpart);
| ~~~~~~~~~~~~~~
| |
| long long unsigned int
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Acked-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
Some dt-binding headers mask the upstream ones which can lead to build
failures, or worse: super weird bugs, if they get out of sync.
Remove these headers so our devicetree and binding headers will both be
in sync with upstream.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
The TI DP83822 does have support for configurable RGMII RX/TX clock
shift, add support for parsing DT properties which describe the RX/TX
clock shift configuration and configuration of the matching bits in
RCSR register.
The shift is only configurable on DP83822, the other PHYs supported
by this PHY driver, namely DP83825/DP83826 variants, do not implement
this functionality and the RCSR bits used to configure the clock shift
are missing from those PHYs.
The shift is configurable separately for RX and TX path. Each path can
either enable the shift or disable the shift using single bit. In case
the shift is disabled, a delay of 0ns is added to the path, otherwise
a delay of 3.5ns is added to the path.
Note that the two RCSR bits 11 and 12 have inverted logic, RCSR bit 12
enables RX internal shift when SET, while RCSR bit 11 enables TX shift
when UNSET.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Weijie Gao <[email protected]> says:
This patch series add support for MediaTek MT7987 SoC with its reference
boards and related drivers.
This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these
boards. The clock, pinctrl drivers and the SoC initializaton code are also
included.
Link: https://lore.kernel.org/r/[email protected]
|
|
This patch adds eMMC/SD support for MT7987 SoC
Signed-off-by: Weijie Gao <[email protected]>
|
|
This patch adds pinctrl and gpio support for MT7987 SoC
Signed-off-by: Weijie Gao <[email protected]>
|
|
This patch adds clock driver support for MediaTek MT7987 SoC
Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
|
|
These functions can be static as they are referenced only in this file.
Make them static. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
It seems that every remaining system which enables BITBANGMII also
enables BITBANGMII_MULTI . Remove the BITBANGMII_MULTI symbol and
assume it is always enabled. This allows removal of a bit of legacy
code. No functional change intended.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
CI: https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/24375
We have use cases where a previous stage boot loader doesn't have any
TPM drivers. Instead of extending the hardware PCRs it produces an
EventLog that U-Boot later replays on the hardware.
The only real example we have is TF-A, which produces the EventLog using
hashing algorithms created at compile time. This creates a problem to the
TPM since measurements need to extend all active PCR banks. Up to now
we were exiting refusing the extend measurements.
TPMs can be instructed to change their active PCR banks, as long as the
device resets immediately after a reconfiguration. This PR is adding
that functionality. U-Boot can now scan the currently active TPM PCR
banks, the ones it was compiled to support and the ones present in an
EventLog. It the reconfigures the TPM on the fly with the correct algorithms.
|
|
Add compatible string for the Intel XScale variant of the 16550. Needed
to match upstream.
Signed-off-by: Duje Mihanović <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Move default eventlog size from efi to tpm for using in both
efi and measured boot.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
The SDRAM_IDX in DDRSS_V2A_CTL_REG describes the number of address bits
minus 16 that are used to determine the mask used to detect memory
rollover and prevent aliasing and false coherency issues.
Set SDRAM_IDX using the device private data, ddr_ram_size for K3 family
of SoCs.
Signed-off-by: Santhosh Kumar K <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/24366
- Refactor the imx pinctrl driver.
- Enable optional ENETREF clock on i.MX95
- Remove optional from tee-os entry on the i.MX8M u-boot devicetrees.
|
|
The ENETCv4 port DT nodes on i.MX95 may contain optional clock phandle
to IMX95_CLK_ENETREF "ref" clock. These "ref" clock must be enabled for
the ethernet to work. These "ref" clock are enabled after cold boot, but
when the system booted Linux and rebooted, those "ref" clock might have
been disabled in the process, which would make ethernet inoperable after
reboot. Make sure those "ref" clock are always correctly enabled.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This series of patches from Mark Tomlinson fixes two problems with the
mx313xx series of RTC devices.
Link: https://lore.kernel.org/r/[email protected]
|
|
When setting the time on the MAX31343, the time is not updated
for one second, and reading the time in this interval will give
the old time. Wait one second after writing so that the date
command will show the correct time when setting the clock.
Signed-off-by: Mark Tomlinson <[email protected]>
Cc: Chris Packham <[email protected]>
Reviewed-by: Chris Packham <[email protected]>
|
|
An invalid calculation made setting years 2100-2199 impossible.
Signed-off-by: Mark Tomlinson <[email protected]>
Cc: Chris Packham <[email protected]>
Reviewed-by: Chris Packham <[email protected]>
|
|
Split MMIO accessors into pinctrl-imx-mmio.c and build this
file only if Kconfig symbol PINCTRL_IMX_MMIO is selected.
Select PINCTRL_IMX_MMIO Kconfig symbol for all but pinctrl-imx8.c
driver, which does not use the MMIO accessors. This reduces the
amount of code compiled on platforms which do not use the code.
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The only user of the SCU pinctrl code is pinctrl-imx8.c , fold
the entire pinctrl-scu.c code into pinctrl-imx8.c and remove the
matching Kconfig symbols and Makefile entries. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
imx_pinctrl_set_state_mmio()
Call imx_pinctrl_set_state_common() from imx_pinctrl_scu_conf_pins(),
rename imx_pinctrl_scu_conf_pins() to imx_pinctrl_set_state_scu().
Get rid of the unnecessary ifdeffery in pinctrl-imx.h in the process.
Remove all SCU support from pinctrl-imx.c imx_pinctrl_set_state_mmio()
which makes that function a pure MMIO pinctrl configuration accessor.
Update pinctrl-imx8.c to call imx_pinctrl_set_state_scu directly.
No functional change.
This patch is best viewed with git show -w due to indent change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Split imx_pinctrl_set_state() into imx_pinctrl_set_state_common() and
imx_pinctrl_set_state_mmio(). The former does the common configuration
parsing, the later does call imx_pinctrl_set_state_common() and then
does pin configuration using either SCU or MMIO accesses. The SCU part
is going to be moved out in follow up patches.
This is a preparatory patch for follow up pinctrl drivers which
do not use the MMIO accessors, but some other means, like SCU or
otherwise. Those will call the common imx_pinctrl_set_state_common()
function wrapped into some other imx_pinctrl_set_state_*() function,
in a way similar to imx_pinctrl_set_state_mmio() does so for MMIO
accesses.
Update all imx_pinctrl_set_state_mmio() call sites to call
imx_pinctrl_set_state_mmio() instead.
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The current implementation of imx_pinctrl_remove() is specific
to the MMIO accessor implementation, rename the function to
imx_pinctrl_remove_mmio() to make this obvious. No functional
change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Split imx_pinctrl_probe() into imx_pinctrl_probe_common() and
imx_pinctrl_probe_mmio(). The former does the common setup, the
later does the common setup and MMIO access configuration. The
common setup can be used as-is for SCU based systems, update
the pinctrl-imx8 to call only the common setup, update all the
other pinctrl drivers to call imx_pinctrl_probe_mmio().
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The probe function is identical across all the pinctrl drivers.
Inline the imx_pinctrl_soc_info access into imx_pinctrl_probe()
and drop all the duplicate probe functions. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The return callback for SCU variant of the pinctrl drivers does
nothing but returns 0. Remove the return callback from the SCU
driver itself, that has the same effect. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the structure instances to match driver names, so they
can be easily looked up e.g. in objdump and readelf outputs.
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Move imx_pinctrl_ops into drivers and staticize. This is preparatory
patch for follow up pinctrl drivers which will not use this variant
of imx_pinctrl_ops content. This should not change size, as most of
the deployments compiled in one pinctrl driver anyway. No functional
change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Replace Maximumm with Maximum in Kconfig symbol description, fix a typo.
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga
1. Bug fixed for doorbell in secure device manager mailbox driver
2. Enhancement on SoCFPGA dwc_eth_xgmac driver
3. Enhancement on DW MAC driver
4. Improved the error message and status for SoC64 device FPGA
configuration driver
5. Updated existing watchdog in system manager to support new SM device
|
