summaryrefslogtreecommitdiff
path: root/include/configs/nitrogen6x.h
AgeCommit message (Collapse)Author
2025-11-29nitrogen6x: Stop disabling device tree relocationTom Rini
Remove setting of fdt_high to ~0, which disables device tree relocation, from the default environment. Doing so prevents U-Boot from correcting problems such as having an unaligned device tree and leads to various failure modes in the OS. Signed-off-by: Tom Rini <[email protected]>
2024-08-30imx: Remove CFG_MXC_USB_PORTSCFabio Estevam
The definition of CFG_MXC_USB_PORTSC as (PORT_PTS_UTMI | PORT_PTS_PTW) can be removed from mx5/mx6/mx7/mx8m board config files as it is the default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c. Suggested-by: Tim Harvey <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Tim Harvey <[email protected]>
2024-08-30imx: Remove CFG_MXC_USB_FLAGSFabio Estevam
CFG_MXC_USB_FLAGS is only used for drivers/usb/host/ehci-mx5.c, so it can be removed from all the imx6/imx7/imx8m board config files. mx51evk.h is the only place CFG_MXC_USB_FLAGS is not set to 0. Suggested-by: Tim Harvey <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Marek Vasut <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2024-07-22nitrogen6x: convert to DM_I2C and DM_SERIALAnatolij Gustschin
Rework to remove use of legacy I2C API. Also switch to DM_SERIAL to avoid board removal warning. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Troy Kisky <[email protected]>
2022-12-23global: Migrate CONFIG_MXC_USB_FLAGS et al to CFGTom Rini
Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_MXC_UART_BASE to CFGTom Rini
Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FEC_MXC_PHYADDR to CFGTom Rini
Perform a simple rename of CONFIG_FEC_MXC_PHYADDR to CFG_FEC_MXC_PHYADDR Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFGTom Rini
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <[email protected]>
2022-12-22usb: Remove CONFIG_USBD_HSTom Rini
This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_IMX_VIDEO_SKIP et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_VIDEO_SKIP CONFIG_IMX_HDMI Signed-off-by: Tom Rini <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-10global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-10-30Convert CONFIG_VIDEO_LOGO_MAX_SIZE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_LOGO_MAX_SIZE Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Rename CONFIG_SYS_VIDEO_LOGO_MAX_SIZESimon Glass
This option should not have the SYS_ in it. Drop it so it fits in with the other video options. Also simplify the alignment code in gunzip_bmp(), since malloc() always returns a 32-bit-aligned pointer. Signed-off-by: Simon Glass <[email protected]>
2022-10-21nitrogen6x: Remove extra quotes in fdtfileAriel D'Alessandro
After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile string: Retrieving file: /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb ** File not found /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb ** CONFIG_DEFAULT_DEVICE_TREE option is string typed, so __stringify() is adding extra quotes. Remove this. Signed-off-by: Ariel D'Alessandro <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Acked-by: Troy Kisky <[email protected]>
2022-07-05Convert CONFIG_PCI_SCAN_SHOW to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_SCAN_SHOW Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCIE_IMX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE_IMX Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <[email protected]>
2022-06-28ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <[email protected]>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <[email protected]>
2022-03-18net: fec_mxc: Drop CONFIG_FEC_XCV_TYPETom Rini
With all boards now using DM_ETH we determine the value for CONFIG_FEC_XCV_TYPE at run time, except in the case of the default fall-back. Set the fallback directly now. Cc: Fabio Estevam <[email protected]> Cc: Ramon Fried <[email protected]> Cc: Stefano Babic <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <[email protected]>
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_FEC_MXC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <[email protected]>
2021-09-07arm: Finish migration of CONFIG_MACH_TYPETom Rini
As this is only useful when booting with ATAGs, which are now largely disabled, remove this value for the remaining platforms. We have a few places in the code that had been testing for MACH_TYPE as a sort of internal logic. Update those to use different but still correct CONFIG symbols. Cc: Phil Sutter <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31nitrogen6x: Populate FDTFILE at build-time for all platformsTom Rini
Rather than using CONFIG_SABRELITE to set FDTFILE for only that platform, switch to always setting this based on CONFIG_DEFAULT_DEVICE_TREE as this should always match the kernel device tree name anyhow. Signed-off-by: Tom Rini <[email protected]> Acked-by: Troy Kisky <[email protected]>
2021-08-31global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDRTom Rini
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-07-28i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <[email protected]>
2020-08-23Convert CONFIG_NETCONSOLE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <[email protected]>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <[email protected]>
2020-07-17Convert CONFIG_MXC_UART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <[email protected]> Acked-by: Peng Fan <[email protected]>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <[email protected]>
2020-05-08treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <[email protected]> Signed-off-by: Michal Simek <[email protected]> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <[email protected]>
2020-05-08cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mappingMichal Simek
There is no real need to exactly define space for saving patterns for alternate memory test. It is much easier to allocate space on the stack and use it instead of trying to find out space where pattern should be saved. For example if you want to test the whole DDR memory you can't save patter to DDR and you need to find it out. On Xilinx devices DDR or OCM addresses were chosen but that means that OCM needs to be mapped and U-Boot has access permission there. It is easier to remove this limitation and simply save it on stack because it is very clear that memory test can't rewrite U-Boot and U-Boot has also full access to memory where runs from. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] Signed-off-by: Tom Rini <[email protected]> Acked-by: Joe Hershberger <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2019-08-02Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <[email protected]>
2019-08-02Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOTSimon Glass
In order to use CONFIG_PREBOOT with Kconfig, CONFIG_USE_PREBOOT must be defined for each board. To prepare for conversion to Kconfig, add this. Signed-off-by: Simon Glass <[email protected]>
2019-04-13imx: move CONFIG_VIDEO_IPUV3 to defconfigsAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-14 16:16:27 +0000