summaryrefslogtreecommitdiff
path: root/include/configs/phycore_imx8mp.h
AgeCommit message (Collapse)Author
2024-07-05configs: Remove duplicate newlinesMarek Vasut
Drop all duplicate newlines from config headers. No functional change. Signed-off-by: Marek Vasut <[email protected]>
2024-06-03board: phytec: phycore_imx8mp: Add support for different RAM sizesTeresa Remmet
Add support for different RAM sizes and speed grades on the phyCORE-i.MX8MP. Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz, 4GB 2GHz and 8GB 2GHz RAM. The RAM size and speed grade is detected by the information stored in the EEPROM on the SoM. Co-developed-by: Benjamin Hahn <[email protected]> Signed-off-by: Benjamin Hahn <[email protected]> Co-developed-by: Yannic Moog <[email protected]> Signed-off-by: Yannic Moog <[email protected]> Co-developed-by: Yashwanth Varakala <[email protected]> Signed-off-by: Yashwanth Varakala <[email protected]> Signed-off-by: Teresa Remmet <[email protected]>
2024-03-17phycore_imx8mp: Move environment from include/config to boardLeonard Anderweit
Move the environment into the board directory and convert it from a C header to a text file. Sort the variables alphabetically. No functional changes. Signed-off-by: Leonard Anderweit <[email protected]> Reviewed-by: Teresa Remmet <[email protected]> Tested-by: Teresa Remmet <[email protected]>
2024-02-08phycore-imx8mp: add support for booting and flashing emmc via UUUBenjamin Hahn
add support for Serial Downloader Boot via UUU as well as flashing emmc via UUU on USB0 Port of phyBOARD Pollux. Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Benjamin Hahn <[email protected]>
2022-12-23global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFGTom Rini
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_POWER_PCA9450 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_POWER_PCA9450 Signed-off-by: Tom Rini <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-06-14configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGEPeng Fan
CONFIG_SPL_RAW_IMAGE_SUPPORT default y has been used to replace CONFIG_SPL_ABORT_ON_RAW_IMAGE for quite some time, so drop CONFIG_SPL_ABORT_ON_RAW_IMAGE. Signed-off-by: Peng Fan <[email protected]>
2022-06-14imx: imx8m[m/p]_phycore: Enable DM_SERIALPeng Fan
Enable CONFIG_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <[email protected]> Tested-by: Teresa Remmet <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <[email protected]>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_BARGSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BARGSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2022-05-20ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)Marek Vasut
Introduce helper macro UART_BASE_ADDR(n), which returns Nth UART base address. Convert all board configurations to this new macro. This is the first step toward switching CONFIG_MXC_UART_BASE to Kconfig. This is a clean up, no functional change. The new macro contains compile-time test to verify N is in suitable range. The test works such that it multiplies constant N by constant double-negation of size of a non-empty structure, i.e. it multiplies constant N by constant 1 in each successful compilation case. The non-empty structure may contain C11 _Static_assert(), make use of this and place the kernel variant of static assert in there, so that it performs the compile-time check for N in the correct range. Note that it is not possible to directly use static_assert in compound statements, hence this convoluted construct. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]>
2022-04-21configs: drop CONFIG_MMCROOTPeng Fan
CONFIG_MMCROOT is only used to set mmcroot, no need a dedicated macro. Script as below " for i in `ls include/configs/*.h` do mmcroot=`sed -n '/define.*MMCROOT/ p' $i | awk -F\" '{ print $2;}'` if [ ! -n "$mmcroot" ]; then continue fi sed -i '/define.*MMCROOT/ d' $i sed -i 's,\" CONFIG_MMCROOT \",'$mmcroot',g' $i done " Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2022-04-21configs: phycore_imx8mm/p: drop unused SDHC macroPeng Fan
With SPL_DM_MMC and DM_MMC, the two macros not needed, drop it. CONFIG_SYS_FSL_USDHC_NUM CONFIG_SYS_FSL_ESDHC_ADDR Reviewed-by: Fabio Estevam <[email protected]> Acked-By: Teresa Remmet <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2021-12-27Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespaceTom Rini
This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <[email protected]>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_FSL_USDHC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SPL_DRIVERS_MISC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini <[email protected]>
2021-09-04i2c: Convert CONFIG_POWER_I2C et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <[email protected]>
2021-09-04power: Rename CONFIG_POWER to CONFIG_POWER_LEGACYSimon Glass
This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDRTom Rini
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-07-28i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2021-07-10board: phytec: phycore_imx8mp: Add fec supportTeresa Remmet
Enable support for the fec ethernet on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2021-07-10board: phytec: phycore_imx8mp: Change debug UARTTeresa Remmet
With the first redesign the debug UART had changed from UART2 to UART1. As the first hardware revision is considered as alpha and will not be supported in future. The old setup will not be preserved. Signed-off-by: Teresa Remmet <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2021-02-21board: freescale: drop CONFIG_DM_I2C undefsIgor Opaniuk
Drop CONFIG_DM_I2C undefs from board header files, and make them disabled on these boards in defconfigs instead. Disabling on Kconfig symbol was done automatically with this script: cd configs files=(*ls1046a*) files2=(*T104*RDB*) files3=(ls1021atwr_*) files4=("imx8mp_evk_defconfig phycore-imx8mp_defconfig") combine=("${files[@]}" "${files2[@]}" "${files3[@]}" "${files4[@]}") cd .. for item in ${combine[*]} do echo "Adjusting $item" echo "# CONFIG_SPL_DM_I2C is not set" >> configs/$item make $item && make savedefconfig && cp defconfig configs/$item done Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-01-23board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP supportTeresa Remmet
Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-15 04:31:10 +0000