summaryrefslogtreecommitdiff
path: root/include/configs/synquacer.h
AgeCommit message (Collapse)Author
2024-03-02FWU: developerbox: read boot index from NOR flashMasahisa Kojima
The FWU Multi Bank Update feature allows the platform to boot the firmware images from one of the partitions(banks). On the Developerbox, SCP-firmware running on the SCB(Cortex-M3) passes the value of the boot index on the NOR flash. Add a function to read the boot index value from the NOR flash. Signed-off-by: Masahisa Kojima <[email protected]>
2023-10-31board: developerbox: remove obsolete NOR flash layout definitionMasahisa Kojima
There are two kinds of NOR flash layout for the Developerbox. Capsule update for the old layout is no longer available since it has small capacity for secure world images and can not house the TA such as fTPM. This commit removes the definition related to the obsolete NOR flash layout for the UEFI capsule update. Signed-off-by: Masahisa Kojima <[email protected]> Acked-by: Jassi Brar <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2023-06-09fwu: DeveloperBox: add support for FWUJassi Brar
Add code to support FWU_MULTI_BANK_UPDATE. The platform does not have gpt-partition storage for Banks and MetaData, rather it used SPI-NOR backed mtd regions for the purpose. Signed-off-by: Jassi Brar <[email protected]>
2022-12-23global: Migrate CONFIG_PL01x_PORTS to CFGTom Rini
Perform a simple rename of CONFIG_PL01x_PORTS to CFG_PL01x_PORTS Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_PL011_CLOCK to CFGTom Rini
Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_MAX_MEM_MAPPED to CFGTom Rini
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFGTom Rini
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <[email protected]>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-06-28Globally remove most CONFIG_SPL_BUILD tests from config headersTom Rini
With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2022-04-15capsule: board: Add information needed for capsule updatesSughosh Ganu
Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <[email protected]>
2022-01-21configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to KconfigPatrick Delaunay
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries to defconfigs. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]> [trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration] Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_PCI_64BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PCI_64BIT Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_MEMTEST_START et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END This is removing unused defines and correcting the default value to be 0x0 as we are a hex symbol. Signed-off-by: Tom Rini <[email protected]>
2021-11-15configs: synquacer: Fix dfu_alt_info to use nor1Masami Hiramatsu
Fix dfu_alt_info to use nor1 instead of the device name. This reverts a part of commit 59bd18d4c4d7 ("configs: synquacer: Remove mtdparts settings and update DFU setting") because the commit a4f2d8341455 ("mtd: spi: nor: force mtd name to "nor%d"") changed the mtd device naming scheme to nor%d. Signed-off-by: Masami Hiramatsu <[email protected]> Acked-by: Ilias Apalodimas <[email protected]>
2021-11-12Remove CONFIG_SERIAL_MULTITom Rini
This symbol has been functionally dead for a long time. Remove the last and recent re-introductions of setting it, and update the whitelist so it will not be re-introduced again. Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_PL011_SERIAL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PL011_SERIAL CONFIG_PL01X_SERIAL Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SYS_HZ to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <[email protected]>
2021-10-01serial: Use the default CONFIG_SYS_BAUDRATE_TABLE in more platformsTom Rini
A number of platforms are still defining CONFIG_SYS_BAUDRATE_TABLE to the fallback default of "{ 9600, 19200, 38400, 57600, 115200 }", but with varying whitespace, or were introduced after the default fallback was added. Use the default table here. Signed-off-by: Tom Rini <[email protected]>
2021-10-01Convert CONFIG_BAUDRATE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BAUDRATE Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-07-23configs: synquacer: Remove mtdparts settings and update DFU settingMasami Hiramatsu
Since MTD partitions are based on the devicetree name, remove unneeded mtdparts settings and update DFU setting. Signed-off-by: Masami Hiramatsu <[email protected]>
2021-07-06configs: synquacer: Enable EFI capsule update supportMasami Hiramatsu
Enable EFI capsule update support. With the EFI capsule update, you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are usually combined as a FIP binary, but if the binary is bigger than 480KB, you have to modify FIP header, split the OP-TEE and stores the OP-TEE binary in the different place. This configuration supports both cases. Signed-off-by: Masami Hiramatsu <[email protected]>
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-16 01:54:50 +0000