summaryrefslogtreecommitdiff
path: root/include/configs/x86-common.h
AgeCommit message (Collapse)Author
2024-07-05configs: Remove duplicate newlinesMarek Vasut
Drop all duplicate newlines from config headers. No functional change. Signed-off-by: Marek Vasut <[email protected]>
2023-08-09x86: Drop unused distro settingsSimon Glass
No x86 board uses distro boot, so drop these settings. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison Reviewed-by: Bin Meng <[email protected]>
2023-08-09x86: Drop inclusion of ibmpc.hSimon Glass
This is not needed in this file anymore. Drop it. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison Reviewed-by: Bin Meng <[email protected]>
2023-08-09x86: Drop CFG_SYS_STACK_SIZESimon Glass
This is only used in one file and the value is the same for both boards which define it. Use the fixed value of 32KB and drop the CFG. This will allow removal of the config.h files. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison Reviewed-by: Bin Meng <[email protected]>
2022-12-23global: Migrate CONFIG_STD_DEVICES_SETTINGS to CFGTom Rini
Perform a simple rename of CONFIG_STD_DEVICES_SETTINGS to CFG_STD_DEVICES_SETTINGS Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_RAMDISK_ADDR to CFGTom Rini
Perform a simple rename of CONFIG_RAMDISK_ADDR to CFG_RAMDISK_ADDR Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_OTHBOOTARGS to CFGTom Rini
Perform a simple rename of CONFIG_OTHBOOTARGS to CFG_OTHBOOTARGS Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFGTom Rini
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <[email protected]>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <[email protected]>
2022-11-10Convert CONFIG_SYS_INTERLAKEN et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_INTERLAKEN CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCI_CONFIG_HOST_BRIDGE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_CONFIG_HOST_BRIDGE Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-04-01Convert CONFIG_SYS_MONITOR_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_BASE Note that for how this is re-used on some PowePC platforms, we introduce CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the CONFIG_VAL macro to get the correct value at build time, in the code. Signed-off-by: Tom Rini <[email protected]>
2022-03-03Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-03-03Convert CONFIG_BOOTFILE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <[email protected]>
2021-12-26x86: coreboot: Support getting a logo from virtioSimon Glass
Enable this feature so that a splash screen can be provided. Signed-off-by: Simon Glass <[email protected]>
2021-12-17Convert CONFIG_PHYSMEM to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_PHYSMEM Signed-off-by: Simon Glass <[email protected]> Suggested-by: Sean Anderson <[email protected]>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <[email protected]>
2021-10-01kgdb: Remove unused serial related optionsTom Rini
We have a few CONFIG options for KGDB that are not referenced, remove them. Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDRTom Rini
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: Tom Rini <[email protected]>
2021-08-30ppc: Rework some hard-coded BOOTCOMMANDSTom Rini
There are an assortment of hard-coded CONFIG_BOOTCOMMAND options in some board headers. Rework these so that they do not add to the CONFIG namespace. Signed-off-by: Tom Rini <[email protected]>
2021-06-08net: convert TFTP_TSIZE to proper Kconfig optionTero Kristo
TFTP transfer size can be used to re-size the TFTP progress bar on single line based on the server reported file size. The support for this has been around from 2019, but it was never converted to proper Kconfig. While adding this new Kconfig, enable it by default for OMAP2+ and K3 devices also. Signed-off-by: Tero Kristo <[email protected]>
2021-04-22lmb: move CONFIG_LMB in KconfigPatrick Delaunay
Migrate CONFIG_LMB in Kconfig. Signed-off-by: Patrick Delaunay <[email protected]>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <[email protected]> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <[email protected]>
2020-06-04Convert CONFIG_CMD_ASKENV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini <[email protected]>
2020-06-04Convert CONFIG_BZIP2 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BZIP2 CONFIG_GZIP CONFIG_LZO CONFIG_ZLIB CONFIG_LZMA CONFIG_LZO Signed-off-by: Tom Rini <[email protected]>
2020-05-08treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <[email protected]> Signed-off-by: Michal Simek <[email protected]> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <[email protected]>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] Signed-off-by: Tom Rini <[email protected]> Acked-by: Joe Hershberger <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2019-08-18x86: qemu: Fix build warnings with CONFIG_DISTRO_DEFAULTS=nBin Meng
Use DISTRO_BOOTENV to decouple BOOTENV from CONFIG_DISTRO_DEFAULTS. Reported-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Bin Meng <[email protected]>
2019-08-09x86: qemu: Fix non-working ramboot and nfsboot environment variablesBin Meng
With qemu-x86 starting to use config_distro_bootcmd, the pre-defined ramboot and nfsboot commands do not work any more. This is caused by undefined environment variable 'ramdiskaddr' that was previously set in CONFIG_EXTRA_ENV_SETTINGS but later CONFIG_EXTRA_ENV_SETTINGS was redefined for distro boot. Update the x86 generic CONFIG_EXTRA_ENV_SETTINGS to consider distro boot, and remove the one in qemu-x86.h. Signed-off-by: Bin Meng <[email protected]>
2019-08-02Convert CONFIG_SHOW_BOOT_PROGRESS to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SHOW_BOOT_PROGRESS Signed-off-by: Simon Glass <[email protected]>
2019-05-08x86: Enable the RTC on all boardsSimon Glass
With the move to Kconfig this option should be set in Kconfig, not in the config header file. Move it. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2018-09-25ata: Drop CONFIG_SYS_SCSI_MAX_* from boards using DM_SCSITuomas Tynkkynen
These options are not used or necessary when device model is being used for SCSI. Just drop them. Signed-off-by: Tuomas Tynkkynen <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2018-09-17x86: drop custom CONFIG_SYS_BAUDRATE_TABLE defineChristian Gmeiner
This will add support for a baud rate of 57600. Signed-off-by: Christian Gmeiner <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2018-08-30x86: efi: payload: Turn on acpi in the kernel command lineBin Meng
Now that we have full Linux kernel boot support on EFI payload, avoid pass "acpi=off" to the kernel command line. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <[email protected]>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <[email protected]>
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2018-04-08treewide: Convert CONFIG_HOSTNAME to a string optionMario Six
CONFIG_HOSTNAME is defined as a "plain" preprocessor string, but every use is couched by __stringify(...). Hence, convert it to a proper string option. Signed-off-by: Mario Six <[email protected]>
2018-04-08treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to KconfigMario Six
Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <[email protected]> [trini: Re-run migration] Signed-off-by: Tom Rini <[email protected]>
2018-04-08treewide: Migrate CONFIG_LAST_STAGE_INIT to KconfigMario Six
Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig. Signed-off-by: Mario Six <[email protected]>
2018-02-23Convert CONFIG_BOOTP_BOOTPATH et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <[email protected]> [trini: Re-run the migration] Signed-off-by: Tom Rini <[email protected]>
2018-01-30configs: x86: allow to override CONFIG_BOOTCOMMANDHeinrich Schuchardt
Allow to override CONFIG_BOOTCOMMAND in .config. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Bin Meng <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-14 13:47:52 +0000