summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2023-11-10Merge branch '2023-11-10-assorted-fixes'Tom Rini
- Fix some issues Coverity has reported, update MAINTAINERS file, another bootstd fix, typo fix in error message, gitignore fix and update TI's URL in many places.
2023-11-10tree-wide: Replace http:// link with https:// link for ti.comNishanth Menon
Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <[email protected]>
2023-11-09board: rockchip: add Pine64 QuartzPro64 RK3588 boardTom Fitzhenry
QuartzPro64 is a Rockchip RK3588 based SBC by Pine64. UART and boot over SD/eMMC/RJ45 are tested to work. Linux commits from next-20231013: 8152d3d070a9 ("arm64: dts: rockchip: Add QuartzPro64 SBC device tree") Signed-off-by: Tom Fitzhenry <[email protected]> Reviewed-by: Kever Yang <[email protected]> Cc: Eugen Hristev <[email protected]> Cc: Jonas Karlman <[email protected]> Cc: Ondrej Jirman <[email protected]>
2023-11-07configs: Add support in Kconfig and convert for armada boardsAlgapally Santosh Sagar
Move the DEFAULT_ENV_IS_RW to Kconfig for easier configuration. Hence, add the CONFIG_DEFAULT_ENV_IS_RW config to the defconfig files to allow enabling them for armada boards. Signed-off-by: Algapally Santosh Sagar <[email protected]> Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Reviewed-by: Simon Glass <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-11-06bmips: Add Inteno XG6846 boardLinus Walleij
This adds support for the Inteno XG6846 board based on the Broadcom MIPS 6328 SoC. The default boot will read a uImage from flash and boot it. Reviewed-by: Daniel Schwierzeck <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2023-11-06ARM: configs: libretech-ac: enable USB_DFU like in meson64.hNeil Armstrong
USB_DFU was added in meson64.h but is missing in libretech-ac.h, fix this to enable DFU RAM boot for libretech-ac. Fixes 4aa027b3f8 ("configs: meson64: add alternate USB DFU boot target") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-11-03configs: transformer_t30: convert bootmenu optionSvyatoslav Ryhel
Convert refresh USB to enter console. Transformers have full size USB and a dock keyboard so access to U-Boot console would be handy. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-11-02board: sifive: unmatched: move kernel load address to 0x80200000Yong-Xuan Wang
U-boot initially loads the kernel image to the kernel_addr_r, and subsequently relocates it to memory address 0x80200000. Setting kernel_addr_r to 0x80200000 can eliminate one copy operation. Signed-off-by: Yong-Xuan Wang <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-10-31corstone1000: enable distro booting commandAbdellatif El Khlifi
enable distro_bootcmd Signed-off-by: Abdellatif El Khlifi <[email protected]> Signed-off-by: Rui Miguel Silva <[email protected]>
2023-10-31board: developerbox: remove obsolete NOR flash layout definitionMasahisa Kojima
There are two kinds of NOR flash layout for the Developerbox. Capsule update for the old layout is no longer available since it has small capacity for secure world images and can not house the TA such as fTPM. This commit removes the definition related to the obsolete NOR flash layout for the UEFI capsule update. Signed-off-by: Masahisa Kojima <[email protected]> Acked-by: Jassi Brar <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2023-10-31configs: npcm: Support more uart baud rateJim Liu
Add uart baud rate table to arbel(npcm8xx) and poleg(npcm7xx) Signed-off-by: Jim Liu <[email protected]> [trini: Rework slightly] Signed-off-by: Tom Rini <[email protected]>
2023-10-28iot2050: Allow for more than 1 USB storage deviceJan Kiszka
This was lost in refactoring while some users of the IOT2050 expect it to work: Make sure that up to 3 USB storage devices are probed. Fixes: 53873974a4b0 ("include: armv7: Enable distroboot across all configs") Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2023-10-27vexpress64: Add MMC card to the BOOT_TARGET_DEVICES of FVPWei Chen
Add MMC disk to FVP's BOOT_TARGET_DEVICES. This allows the user to boot from MMC devices. Signed-off-by: Wei Chen <[email protected]> Signed-off-by: Qi Feng <[email protected]> Reviewed-by: Linus Walleij <[email protected]>
2023-10-27Merge tag 'u-boot-amlogic-20231027' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - Fix environment saving for new Android boot features on vim3*_android - Add SPIFC support for Amlogic A1 - Add DFU RAM boot step when booting over USB
2023-10-26configs: meson64: add alternate USB DFU boot targetNeil Armstrong
Add boot over DFU RAM as an alternate to running script at a fixed address like done today. The main culprit is that it's not possible to do that on G12A/Sm1 platforms due to changes in the USB boot protocol. With this, U-Boot will present a DFU device with a ram slot where the Host could write a fitImage or legacy U-Boot image, then with the detach command boot will continue trying to boot the uploaded image. Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-10-26configs: meson64: declare addr out of EXTRA_ENV_SETTINGSNeil Armstrong
In order to reuse addresses for DFU RAM, define them separately, it's cleaner and will be easier to override. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-10-26arm: kirkwood: Enable bootstd for Zyxel NSA310S boardTony Dinh
Enable bootstd for Zyxel NSA310S board, and remove distroboot. Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-10-26arm: kirkwood: Enable bootstd for Pogo V4 boardTony Dinh
Enable bootstd for Pogo V4 board, and remove distroboot. Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-10-24Merge tag 'u-boot-rockchip-20231024' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Board: rk3588 NanoPC-T6, Orange Pi 5, Orange Pi 5 Plus; - clk driver fix for rk3568 and rk3588; - rkmtd cmd support for rockchip nand device; - dts update and sync from linux;
2023-10-23Merge tag 'u-boot-at91-2024.01-b' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 Second set of u-boot-at91 features for the 2024.01 cycle This feature set a new board named Conclusive KSTR sama5d27 with some small prerequisites patches.
2023-10-23board: Add support for Conclusive KSTR-SAMA5D27Artur Rojek
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer. Co-developed-by: Jakub Klama <[email protected]> Signed-off-by: Jakub Klama <[email protected]> Co-developed-by: Marcin Jabrzyk <[email protected]> Signed-off-by: Marcin Jabrzyk <[email protected]> Signed-off-by: Artur Rojek <[email protected]>
2023-10-23board: rockchip: add FriendlyElec NanoPC-T6 rk3588 boardJohn Clark
The NanoPC-T6 is a Rockchip RK3588 based SBC by FriendlyElec. There are four variants depending on the DRAM size: 4G/32GB eMMC, 8G/64GB eMMC, 16G/16MB SPI NOR, and 16G/256GB eMMC/16MB SPI NOR Specifications: CPU: Rockchip RK3588, 4x Cortex-A76 (up to 2.4GHz) + 4x Cortex-A55 (up to 1.8GHz) GPU: Mali-G610 MP4 VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder NPU: 6TOPs, supports INT4/INT8/INT16/FP16 RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz eMMC: 0GB/32GB/64GB/256GB HS400 MicroSD Slot: MicroSD SDR104 PCIe 3.0: M.2 M-Key x1, PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s Ethernet: PCIe 2.5G 2x Ethernet (RTL8125BG) PCIe 2.1: M.2 E-Key x1, PCIe 2.1 x1 and USB2.0 Host, supports M.2 WiFi and Bluetooth 4G Module: MiniPCIe x1, MicroSIM Card Slot x1 Audio Out: 3.5mm jack for stereo headphone output Audio In: 2.0mm PH-2A connector for analog microphone input Video Input: standard HDMI input port, up to 4Kp60 2x 4-lane MIPI-CSI, compatible with MIPI V1.2 Video Output: 2x standard HDMI output ports compatible with HDMI2.1, HDMI2.0, and HDMI1.4 2x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1 USB-A: USB 3.0, Type A USB-C: Full function USB Type‑C port, DP display up to 4Kp60, USB 3.0 40-pin 2.54mm header connector: up to 2x SPIs, 6x UARTs, 1x I2Cs, 8x PWMs, 2x I2Ss, 28x GPIOs Debug UART: 3 Pin 2.54mm header, 3V level, 1500000bps Onboard IR receiver: 38KHz carrier frequency RTC Battery: 2 Pin 1.27/1.25mm RTC battery connector for low power RTC IC HYM8563TS 5V Fan connector Working Temperature: 0C to 70C Power: 5.5*2.1mm DC Jack, 12VDC input Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case) Kernel commits: 893c17716d0c ("arm64: dts: rockchip: Add NanoPC T6") a721e28dfad2 ("arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support") ac76b786cc37 ("arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support") Signed-off-by: John Clark <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-22sunxi: refactor serial base addresses to avoid asm/arch/cpu.hAndre Przywara
At the moment we have each SoC's memory map defined in its own cpu.h, which is included in include/configs/sunxi_common.h. This will be a problem with the introduction of Allwinner RISC-V support. Remove the inclusion of that header file from the common config header, instead move the required serial base addresses (for the SPL) into a separate header file. Then include the original cpu.h file only where we really need it, which is only under arch/arm now. This disentangles the architecture specific header files from the generic code. Signed-off-by: Andre Przywara <[email protected]>
2023-10-17test: spl: Add a test for the NOR load methodSean Anderson
Add a test for the NOR load method. Since NOR is memory-mapped we can substitute a buffer instead. The only major complication is testing LZMA decompression. It's too complex to implement LZMA compression in a test, and we have no in-tree compressor, so we just include some pre-compressed data. This data was generated through something like generate_data(plain, plain_size, "lzma") cat plain.dat | lzma | hexdump -C and was cleaned up further in my editor. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-10-17Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
- RZ/G2L part 1, except for two serial port patches which I had to drop as they broke R2Dplus, they will come later via subsequent PR.
2023-10-17board: rzg2l: Add RZ/G2L SMARC EVK boardPaul Barker
The Renesas RZ/G2L SMARC Evaluation Board Kit consists of the RZ/G2L System-on-Module (SOM) based on the R9A07G044L2 SoC, and a common SMARC carrier board. The ARM TrustedFirmware code for the Renesas RZ/G2L SoC family passes a devicetree blob to the bootloader as an argument in the same was previous R-Car gen3/gen4 SoCs. This blob contains a compatible string which can be used to identify the particular SoC we are running on and this is used to select the appropriate device tree to load. The configuration renesas_rzg2l_smarc_defconfig is added to support building for this target. In the future this defconfig will be extended to support other SoCs and evaluation boards from the RZ/G2L family. Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2023-10-16Merge tag 'u-boot-imx-20231016' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20231016 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/18168 - Imrovement MX93 - Toradex: fixes - Convert to DM (serial, watchdog) for some boards - HAB improvements for Secure Boot - DTO overlay for DHCOM - USB fixes, Mass storage for MX28 - Cleanup some code - Phytec MX8M : EEProm detection, fixes - Gateworks Boards improvements
2023-10-16arm: mvebu: Enable bootstd for Thecus N2350 boardTony Dinh
Enable bootstd for Thecus N2350 board, and remove distroboot. Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-10-16arm: mvebu: Enable bootstd for Synology DS116 boardTony Dinh
Enable bootstd for Synology DS116 board, and remove distroboot. Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-10-16arm: kirkwood: Add support for ZyXEL NSA325 boardTony Dinh
ZyXEL NSA325 specifications: Marvell Kirkwood 88F6282 SoC 1.6 GHz CPU 1x GBE LAN port (Marvell MV88E1318) 512 MB RAM 128 MB Eon NAND, SLC I2C 1x USB 3.0 (on PCIe bus) 2x USB 2.0 2x SATA (hot swap slots) Serial console Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-10-16toradex: verdin-imx8mm/imx8mp: Remove bootcmd_mfgJoao Paulo Goncalves
The bootcmd_mfg env variable is legacy from IMX downstream u-boot branch and is not needed on mainline. Signed-off-by: Joao Paulo Goncalves <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Acked-by: Marcel Ziswiler <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-10-16verdin-imx8mp: drop unused tdx easy installer ifdefHiago De Franco
Drop unused code related to CONFIG_TDX_EASY_INSTALLER, that existed only on toradex downstream branch. Signed-off-by: Hiago De Franco <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-10-12board: ti: am64x: Switch to standard boot flowRoger Quadros
Switch to using bootstd. Note with this change, we will stop using distro_bootcmd and instead depend entirely on bootflow method of starting the system up. Drop header files that are no longer needed in am64x_evm.h. k3_dfu.h is available via k3_dfu.env in am64x.env. Drop unused macro CFG_SYS_SDRAM_BASE1. Signed-off-by: Roger Quadros <[email protected]> Reviewed-by: Nishanth Menon <[email protected]>
2023-10-11ARM: psci: move GIC address override to KconfigAndre Przywara
As the code to switch an ARM core from secure to the non-secure state needs to know the base address of the Generic Interrupt Controller (GIC), we read an Arm Cortex defined system register that is supposed to hold that base address. However there are SoCs out there that get this wrong, and this CBAR register either reads as 0 or points to the wrong address. To accommodate those systems, so far we use a macro defined in some platform specific header files, for affected boards. To simplify future extensions, replace that macro with a Kconfig variable that holds this override address, and define a default value for SoCs that need it. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Sam Edwards <[email protected]>
2023-10-11board: xen: introduce virtio-blk supportAndrii Chepurnyi
Added new xenguest_arm64_virtio_defconfig which enables support for virtio-blk using various types of transport like virtio-pci, vrtio-mmio. Currently supported: up to 2 PCI host bridges and 10 MMIO devices. Note: DT parsing code was partly taken from pci-uclass.c Limitation: All memory regions should be below 4GB address space. Signed-off-by: Andrii Chepurnyi <[email protected]>
2023-10-10fsl-layerscape: drop obsolete PPA secure firmware supportLaurentiu Tudor
PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. Drop support for it. Signed-off-by: Laurentiu Tudor <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-10-08Merge tag 'u-boot-rockchip-20231007' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Board: rk3568 Bananapi R2Pro; - Update pcie bifurcation support; - dwc_eth_qos controller support for rk3568 and rk3588; - Compressed binary support for U-Boot on rockchip platform; - dts and config updates for different board and soc; [ trini: Fix conflict on include/spl.h ] Signed-off-by: Tom Rini <[email protected]>
2023-10-07configs: rockchip: rk3308: enable CONFIG_OF_LIBFDT_OVERLAYFUKAUMI Naoki
enable CONFIG_OF_LIBFDT_OVERLAY and use it on Radxa ROCK Pi S. Signed-off-by: FUKAUMI Naoki <[email protected]>
2023-10-07configs: rockchip: rk3308: use CONFIG_DEFAULT_FDT_FILEFUKAUMI Naoki
all rk3308 boards should use their own dtb file. also, change fdt_addr_r to avoid following error: "ERROR: Did not find a cmdline Flattened Device Tree" it happens on Radxa ROCK Pi S (256MB/512MB) with kernel built from Radxa BSP. Signed-off-by: FUKAUMI Naoki <[email protected]>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Reviewed-by: Martyn Welch <[email protected]> Reviewed-by: Svyatoslav Ryhel <[email protected]>
2023-10-04Merge tag 'u-boot-stm32-20231004' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm STM32 MCU: _ alignment with kernel DT v6.5 for stm32f429 and stm32f746 _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco STM32 MPU: _ alignment with kernel DT v6.6-rc1 _ add RNG support for stm32mp13 _ add USB, USB boot and stm32prog command support for stm32mp13 _ add support of USART1 clock for stm32mp1 _ only print RAM and board code with SPL_DISPLAY_PRINT flag for stm32mp1 _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc for stm32mp15xx DHCOR [ Fix merge conflict at board/st/common/stm32mp_dfu.c ] Signed-off-by: Tom Rini <[email protected]>
2023-10-04configs: stm32mp13: add support of usb bootPatrick Delaunay
Add support of USB key boot in distro boot command. Signed-off-by: Patrick Delaunay <[email protected]> Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2023-10-04configs: stm32mp13: activate command stm32progPatrick Delaunay
Activate the command stm32prog with CONFIG_CMD_STM32MPROG. The CONFIG_SET_DFU_ALT_INFO is also activated to support the required weak functions for the DFU virtual backen defined in board/st/common/stm32mp_dfu.c. Signed-off-by: Patrick Delaunay <[email protected]> Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2023-10-04ARM: stm32: Add dh_update_sd_to_emmc to STM32MP15xx DHCORMarek Vasut
Add script which installs U-Boot binaries from SD card to eMMC and makes the eMMC bootable. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04ARM: stm32: Rename update_sf to dh_update_sd_to_sf on STM32MP15xx DHCORMarek Vasut
Align the script name with DH i.MX8MP DHCOM script name. Add backward compatibility script to avoid breaking user scripts. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04board: stm32f746-disco: refactor the display of the ST logoDario Binacchi
The patch removes the legacy mode of displaying the ST logo and adopts the approach introduced by the commit 284b08fb51b6 ("board: stm32mp1: add splash screen with stmicroelectronics logo"). It was necessary to use a specific logo for the stm32f746-disco board. Furthermore, the previous version didn't properly center the logo, hiding its upper part. Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-02Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-09-30Convert CFG_SYS_UBOOT_START to KconfigJesse Taube
Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE. This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE. Suggested-by: Marek Vasut <[email protected]> Suggested-by: Tom Rini <[email protected]> Signed-off-by: Jesse Taube <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-09-21Merge tag 'xilinx-for-v2024.01-rc1-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2024.01-rc1 clk: - Dont return error when assigned-clocks is empty or missing dm: - Support reading a single indexed u64 value - Add support for reading bootscript address/flash address from DT cmd: - Fix flash_is_unlocked API fpga: - Define fpga_load() for debug build global: - U-Boot project name cleanup (next2) net: - zynq_gem: Use generic_phy_valid() helper - axienet: Convert to ofnode functions - gmii2rgmii: Read bridge address from DT pytest: - skip tpm2_startup when env__tpm_device_test_skip=True spi-nor: - Add mx25u25635f support - zynqmp_qspi: Tune cache behavior trace: - Fix flyrecord alignment issue xilinx: - Move scriptaddr to DT as bootscr-address - Pick script_offset_f/script_size_f from DT as bootscr-flash-offset/size - Do not generate distro boot variables if disabled versal: - Extend memory ranges to cover HBM - Enable TPM, sha1sum and KASLRSEED - Fix distroboot prioritization in connection to available devices - Clean mini targets bootcommand - Fix clock driver versal-net: - Enable TPM, sha1sum and KASLRSEED - Fix distroboot prioritization in connection to available devices zynqmp; - Allow AES to run from SPL - Enable CMD_KASLRSEED - Add proper dependencies for USB and remove ZYNQMP_USB - Fix user si570 default frequency for zcu* boards - Cover SOM rev2 revision - Various DT changes - Add firmware and pinctrl support for tristate configuration (high impedance/output enable) - Add output-enable pins to SOMs - Fix distroboot prioritization in connection to available devices - Read bootscript address/flash address from DT - Fix pcap_prog address
2023-09-21zynqmp: config: Add proper dependencies for USBVenkatesh Yadav Abbarapu
When CONFIG_CMD_USB and CONFIG_USB are disabled, still some compilation errors are seen as below. In file included from include/configs/xilinx_zynqmp.h:173, from include/config.h:3, from include/common.h:16, from env/common.c:10: include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:302:9: note: in definition of macro 'BOOTENV_DEV_NAME_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/configs/xilinx_zynqmp.h:77:41: note: in expansion of macro 'BOOTENV_DEV_NAME' 77 | # define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) | ^~~~ include/configs/xilinx_zynqmp.h:168:9: note: in expansion of macro 'BOOT_TARGET_DEVICES_USB' 168 | BOOT_TARGET_DEVICES_USB(func) \ | ^~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:454:25: note: in expansion of macro 'BOOT_TARGET_DEVICES' 454 | "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" | ^~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:474:9: note: in expansion of macro 'BOOTENV_BOOT_TARGETS' 474 | BOOTENV_BOOT_TARGETS \ | ^~~~~~~~~~~~~~~~~~~~ include/configs/xilinx_zynqmp.h:179:9: note: in expansion of macro 'BOOTENV' 179 | BOOTENV | ^~~~~~~ include/env_default.h:120:9: note: in expansion of macro 'CFG_EXTRA_ENV_SETTINGS' 120 | CFG_EXTRA_ENV_SETTINGS | ^~~~~~~~~~~~~~~~~~~~~~ In file included from env/common.c:32: include/env_default.h:27:36: note: to match this '{' 27 | const char default_environment[] = { | ^ scripts/Makefile.build:256: recipe for target 'env/common.o' failed make[1]: *** [env/common.o] Error 1 Makefile:1853: recipe for target 'env' failed make: *** [env] Error 2 make: *** Waiting for unfinished jobs.... Add CONFIG_USB_STORAGE as dependency for USB related macro's such as BOOT_TARGET_DEVICES_USB() and DFU_DEFAULT_POLL_TIMEOUT and CONFIG_THOR_RESET_OFF. Remove CONFIG_ZYNQMP_USB from Kconfig and also from defconfig since it is not used anywhere else. Signed-off-by: Ashok Reddy Soma <[email protected]> Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-29 14:31:56 +0000