summaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)Author
2024-04-28dt-bindings: imx93: sync clock headerPeng Fan
Sync clock header with kernel 6.8 Signed-off-by: Peng Fan <[email protected]>
2024-03-19Merge tag 'u-boot-socfpga-next-20240319' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next - A new driver in the misc to register setting from device tree. This also provides user a clean interface and all register settings are centralized in one place, device tree. - Enable Agilex5 platform for Intel product. Changes, modification and new files are created for board, dts, configs and makefile to create the base for Agilex5. Build-tested on SoC64 boards, boot tested on some of them.
2024-03-18arch: arm: Agilex5 enablementJit Loon Lim
This patch is to enable Agilex5 platform for Intel product. Changes, modification and new files are created for board, dts, configs and makefile to create the base for Agilex5. Signed-off-by: Jit Loon Lim <[email protected]> Reviewed-by: Tien Fong Chee <[email protected]>
2024-03-01dt-bindings: import headers for qcs404Caleb Connolly
Import the headers needed for QCS404-evb. Taken from kernel tag v6.7 Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Caleb Connolly <[email protected]>
2024-03-01dt-bindings: import headers for MSM8996Caleb Connolly
Import dt-binding headers for MSM8996/APQ8096 from Linux. Taken from kernel tag v6.7 Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Caleb Connolly <[email protected]>
2024-03-01dt-bindings: import headers for MSM8916Caleb Connolly
Import the dt-bindings headers in preparation for switching to upstream DTS for MSM8916. Taken from kernel tag v6.7 Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Caleb Connolly <[email protected]>
2024-03-01dt-bindings: import headers for SDM845Caleb Connolly
Import the DT bindings headers that are used by SDM845 from Linux. Taken from kernel tag v6.7 Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Caleb Connolly <[email protected]>
2024-03-01board: dragonboard410c: upstream DT compatCaleb Connolly
Use the root compatible strings from upstream Linux, add missing '#clock-cells' property to the gcc node. Adjust some of the msm8916/apq8016 drivers to use the correct upstream compatible properties and DT bindings. This prepares us to switch to upstream DT in a future patch. Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Tested-by: Sumit Garg <[email protected]> #qcs404 Signed-off-by: Caleb Connolly <[email protected]>
2024-02-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
2024-02-10dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock DefinitionsDuy Nguyen
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car V4M (R8A779H0) SoC. The current version is imported from: https://lore.kernel.org/linux-renesas-soc/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be/ Signed-off-by: Duy Nguyen <[email protected]> Signed-off-by: Hai Pham <[email protected]>
2024-02-04rockchip: rk356x: Sync device tree from linux v6.7Jonas Karlman
Sync rk356x device tree from linux v6.7. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-01-24dt-bindings: clock: Add Exynos850 clock controllerSam Protsenko
Add bindings documentation and the header file for Exynos850 clock controller. It was taken from Linux kernel [1,2]. [1] Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml [2] include/dt-bindings/clock/exynos850.h Signed-off-by: Sam Protsenko <[email protected]> Signed-off-by: Minkyu Kang <[email protected]>
2024-01-16clk/qcom: handle resets and clocks in one deviceKonrad Dybcio
Qualcomm's clock controller blocks actually do much more than it says on the tin.. They provide clocks, resets and power domains. Currently, U-Boot requires one to spawn 2 separate devices for controlling clocks and resets, both spanning the same register space. Refactor the code to make it work with just a single DT node, making it compatible with upstream Linux bindings and dropping the dedicated reset driver in favour of including it in the clock driver. Heavily inspired by Renesas code for a similar hw block. [caleb: moved drivers to clk/qcom, added reset driver and adjusted bind logic. Imported qcom,gcc-ipq4019.h from Linux] Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Caleb Connolly <[email protected]>
2023-12-19Merge patch series "Add support for MediaTek MT8365 EVK Board"Tom Rini
Julien Masson <[email protected]> says: This patch series add the support for the MediaTek MT8365 EVK Board [1]. Most of the code have been copied/adapted from Linux tag v6.7-rc2. For now we only enable/test these features: Boot, UART, Watchdog and MMC. [trini: This includes two clocks not listed in the Linux binding, which needs resyncing later]
2023-12-19dt-bindings: clock: add Mediatek MT8365 SoC clock bindingsJulien Masson
This adds the clock bindings for Mediatek MT8365 SoC based on the dt-bindings in Linux tag v6.7-rc2. (commit c61978175ac1337f028ac1f956666f16db84f4e5) Signed-off-by: Julien Masson <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-13arm: dts: imx8mp: Sync with linux-next 20231019Fabio Estevam
Sync imx8mp.dtsi and imx8mp-clock.h with linux-next 20231019. Signed-off-by: Fabio Estevam <[email protected]>
2023-10-22sunxi: dts: arm: add T113s/D1 DT files from Linux-v6.6-rc6Andre Przywara
This copies in some devicetree files from the official Linux kernel tree, v6.6-rc6. It covers a board with the Allwinner T113s SoC, which shares many devices with its RISC-V sibling, the Allwinner D1(s). This is the reason for the core .dtsi files landing in the arch/riscv directory. We are only adjusting the include path to accommodate for the differences in the U-Boot build system. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Jernej Skrabec <[email protected]>
2023-10-22sunxi: dts: arm64: update devicetree files from Linux-v6.6-rc6Andre Przywara
Sync the devicetree files from the official Linux kernel tree, v6.6-rc6. This is covering Allwinner SoCs with 64-bit ARM cores. Only small cosmetic changes (clock name fixed), but we add the DT for the new OrangePi Zero 3 board, for which U-Boot enablement patches are pending. As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Jernej Skrabec <[email protected]>
2023-10-17Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
- RZ/G2L part 1, except for two serial port patches which I had to drop as they broke R2Dplus, they will come later via subsequent PR.
2023-10-16Merge tag 'u-boot-imx-20231016' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20231016 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/18168 - Imrovement MX93 - Toradex: fixes - Convert to DM (serial, watchdog) for some boards - HAB improvements for Secure Boot - DTO overlay for DHCOM - USB fixes, Mass storage for MX28 - Cleanup some code - Phytec MX8M : EEProm detection, fixes - Gateworks Boards improvements
2023-10-16dt-bindings: Add RZ/G2L CPG bindingsPaul Barker
Import bindings for the Clock Pulse Generator (CPG) module in the Renesas RZ/G2L SoC family. This patch is based on the dt-bindings in Linux v6.5 (commit 52e12027d50affbf60c6c9c64db8017391b0c22e). Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2023-10-16clk: imx: add i.MX93 CCF driverSébastien Szymanski
Add i.MX93 CCF driver support. Modifed from Linux Kernel v6.5-rc2 and adapted for U-Boot. Signed-off-by: Sébastien Szymanski <[email protected]>
2023-10-12dt-bindings: clock: Add Amlogic A1 clock bindingsIgor Prusov
Add clock bindings for Amlogic A1 from linux-next next-20230821. Signed-off-by: Igor Prusov <[email protected]> Reviewed-by: Simon Glass <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-10-04Merge tag 'u-boot-stm32-20231004' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm STM32 MCU: _ alignment with kernel DT v6.5 for stm32f429 and stm32f746 _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco STM32 MPU: _ alignment with kernel DT v6.6-rc1 _ add RNG support for stm32mp13 _ add USB, USB boot and stm32prog command support for stm32mp13 _ add support of USART1 clock for stm32mp1 _ only print RAM and board code with SPL_DISPLAY_PRINT flag for stm32mp1 _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc for stm32mp15xx DHCOR [ Fix merge conflict at board/st/common/stm32mp_dfu.c ] Signed-off-by: Tom Rini <[email protected]>
2023-10-04ARM: dts: stm32mp: alignment with v6.6-rc1Patrice Chotard
Device tree alignment with Linux kernel v6.6.rc1. Signed-off-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2023-10-01clk: renesas: Synchronize R8A779F0 S4 clock tables with Linux 6.5.3Marek Vasut
Synchronize R-Car R8A779F0 S4 clock tables with Linux 6.5.3, commit 238589d0f7b421aae18c5704dc931595019fa6c7 . Signed-off-by: Marek Vasut <[email protected]>
2023-08-03clk: mediatek: add clock driver support for MediaTek MT7988 SoCWeijie Gao
This patch adds clock driver support for MediaTek MT7988 SoC Signed-off-by: Weijie Gao <[email protected]>
2023-07-24dt-bindings: clock: jh7110: Modify clock id to be same with LinuxXingyu Wu
The clock id needs to be changed to be consistent with Linux. Signed-off-by: Xingyu Wu <[email protected]> Signed-off-by: Hal Feng <[email protected]> Reviewed-by: Torsten Duwe <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2023-07-13clk: imx8mp: Update clocks based on kernel 6.4-RC4Adam Ford
There are some newer clocks added to the kernel recently, so to fix prepare for resycing the device trees, update the clock list. Since there are some minor changes to the USB clocks, update which USB clocks are enabled to match with the upstream kernel as well. Signed-off-by: Adam Ford <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Tested-by: Tim Harvey <[email protected]> #imx8mp-venice-gw74xx
2023-07-06riscv: dts: sync mpfs-icicle devicetree with linuxConor Dooley
The "notable" disappearances are: - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings for this & what is going to appear in mainline linux is going to be incompatible with what is currently in U-Boot. - operating points - these operating points should not be set at the soc.dtsi level as they may not be possible depending on the design programmed to the FPGA - clock output names - there are defines for the clock indices, these should not be needed - the dt maintainers in linux NAKed using defines for IRQ numbers - the qspi nand, which is not part of the icicle's default configuration is removed. Reviewed-by: Padmarao Begari <[email protected]> Tested-by: Padmarao Begari <[email protected]> Signed-off-by: Conor Dooley <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2023-06-16ARM: dts: stm32mp: alignment with v6.3Patrick Delaunay
Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Marek Vasut <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-05-21arm: dts: imx93: sync device tree with LinuxPeng Fan
Sync device tree with next-20230426 Signed-off-by: Peng Fan <[email protected]>
2023-05-13ARM: dts: add devicetree for Renesas RZ/N1 SoCRalph Siemsen
This is taken directly from Linux kernel 6.3 (commit 457391b0380335d5e9a5babdec90ac53928b23b4) Signed-off-by: Ralph Siemsen <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2023-05-03dt-binding: histb-clock: add clocks definition for Hi3798MV200Yang Xiwen
These clocks are found on Hi3798MV200 Signed-off-by: Yang Xiwen <[email protected]>
2023-05-02arm: dts: Import device tree for Broadcom NorthstarLinus Walleij
This brings in the main SoC device tree used by the Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x. This is taken from the v6.3 Linux kernel. Cc: Rafał Miłecki <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2023-04-20dt-bindings: clock: Add StarFive JH7110 clock definitionsYanhong Wang
Add all clock outputs for the StarFive JH7110 clock generator. Signed-off-by: Yanhong Wang <[email protected]> Acked-by: Sean Anderson <[email protected]> Tested-by: Conor Dooley <[email protected]>
2023-04-07dt-bindings: clock: Add R8A779G0 V4H CPG Core Clock DefinitionsTho Vu
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car V4H (R8A779G0) SoC from Linux next commit 058f4df42121 ("Add linux-next specific files for 20230228") Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Tho Vu <[email protected]> Signed-off-by: Hai Pham <[email protected]> Signed-off-by: Marek Vasut <[email protected]> [Marek: Update to linux next 20230228 state]
2023-04-07dt-bindings: clock: Add R8A779F0 S4 CPG Core Clock headersTho Vu
Add definitions for R8A779F0 S4 CPG Core Clock headers from Linux next commit 058f4df42121 ("Add linux-next specific files for 20230228") Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Tho Vu <[email protected]> Signed-off-by: Hai Pham <[email protected]> Signed-off-by: Marek Vasut <[email protected]> [Marek: Update to linux next 20230228 state]
2023-03-05sunxi: dts: arm: update devicetree files from Linux v6.2-rc2Andre Przywara
Sync the devicetree files from the Linux kernel repo, v6.2-rc2. This is covering the 32-bit SoCs, from arch/arm/boot/dts. This enables some new devices for the F1C100s family, though this is of little relevance to U-Boot itself. The H3 gains the "phys" property for the first USB controller, which prevents an error message when U-Boot's USB stack comes up, and allows using this port in host mode. As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara <[email protected]>
2023-02-28dt-bindings: clk: Add dt-binding header for RK3588Jagan Teki
Add the dt-bindings header for the Rockchip RK3588, that gets shared between the clock controller and the clock references in the dts. commit <f204a60e545c> ("dt-bindings: clock: add rk3588 clock definitions") Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-02dt-bindings: clock: Pick R-Car Gen3 R8A77961 M3W+ header from Linux 6.1.7Hai Pham
Pick R-Car Gen3 R8A77961 M3W+ CPG Core Clock header from Linux 6.1.7, commit 21e996306a6afaae88295858de0ffb8955173a15 . Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Hai Pham <[email protected]> Signed-off-by: Marek Vasut <[email protected]> # Update commit message
2023-02-02ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7Marek Vasut
Synchronize R-Car device trees with Linux 6.1.7, commit 21e996306a6afaae88295858de0ffb8955173a15 . The following script has been used for the synchronization: $ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ; elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/ else echo "NOT FOUND: $i" fi done $ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' ) Move the include/dt-bindings/{clk,clock}/versaclock.h header used by the renesas boards to match Linux 6.1.y as well. Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used by the arch/arm/dts/r8a774c0-cat874.dts board. Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" . Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect the card enumeration in ebisu.dtsi /aliases DT node . Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to reflect the card enumeration in ulcb.dtsi /aliases DT node . Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Tam Nguyen <[email protected]> # r8a779a0-falcon-u-boot.dts Signed-off-by: Hai Pham <[email protected]> # r8a779a0-falcon-u-boot.dts
2023-02-02ARM: dts: rmobile: Synchronize DT headers with Linux 6.1.7Marek Vasut
Synchronize R-Car device tree headers with Linux 6.1.7, commit 21e996306a6afaae88295858de0ffb8955173a15 . This is only a copyright and SPDX identifier update, no functional change. The following script has been used for the synchronization: $ for i in $(cd include/dt-bindings/clock/ ; ls -1 r8a*) ; do cp /linux-2.6/include/dt-bindings/clock/$i include/dt-bindings/clock/ ; done $ for i in $(cd include/dt-bindings/power/ ; ls -1 r8a*) ; do cp /linux-2.6/include/dt-bindings/power/$i include/dt-bindings/power/ ; done Signed-off-by: Marek Vasut <[email protected]>
2023-01-16dt-bindings: clk: Add dt-binding header for RV1126Jagan Teki
Add the dt-bindings header for the Rockchip RV1126, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Finley Xiao <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: rk3128-cru: sync the clock dt-binding header from LinuxJohan Jonker
In order to update the DT for rk3128 sync the clock dt-binding header. This is the state as of v6.0 in Linux. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-07dt-bindings: stm32mp13: add clock & reset support for STM32MP13Gabriel Fernandez
Add support of stm32mp13 DT bindings of clock and reset. Signed-off-by: Gabriel Fernandez <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-11-15dt-bindings: clk: add missing clk ids for microchip mpfsConor Dooley
When this binding header was initally upstreamed, the PLL clocking the microprocessor subsystem (MSS) and the RTC reference clocks were omitted. Add them now, matching the IDs used in Linux. Signed-off-by: Conor Dooley <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Padmarao Begari <[email protected]>
2022-11-08imx8mp: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler <[email protected]> Tested-By: Tim Harvey <[email protected]> #imx8m{m,n,p}-venice-*
2022-11-08imx8ulp: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler <[email protected]>
2022-11-08imxrt1050: synchronise device tree with linuxMarcel Ziswiler
Synchronise device tree with linux v6.1-rc3. Note: Nowadays, the intent is for them regular device trees to just be synchronised from them Linux kernel device trees and any and all U-Boot specific changes need to go into the -u-boot.dtsi device tree include files which BTW get included automatically by the U-Boot build system. Signed-off-by: Marcel Ziswiler <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-29 14:32:16 +0000