| Age | Commit message (Collapse) | Author |
|---|
|
Import the headers needed for QCS404-evb.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Import dt-binding headers for MSM8996/APQ8096 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Import the dt-bindings headers in preparation for switching to upstream
DTS for MSM8916.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Import the DT bindings headers that are used by SDM845 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Historically, Qualcomm boards have relied on heavy hardcoding in U-Boot,
in many cases to the specific SoC but also to the board itself (e.g.
memory map). This has been largely resolved by modernising the Qualcomm
drivers in U-Boot, however the board code still largely follows this
model.
This patch removes the board specific memory maps and duplicated board
init code, replacing it with generic init code.
The memory map is now built at runtime based on data read from DT, this
allows for the memory map to be provided without having to recompile
U-Boot. Support is also added for booting with appended DTBs, so that
the first-stage bootloader can populate the memory map for us.
The sdm845 specific init code is dropped entirely, it set an environment
variable depending on if a button was pressed, but this variable wasn't
used in U-Boot, and could be written to use the button command instead.
The KASLR detection is also dropped as with appended dtb, the kaslr seed
can be read directly from the DTB passed to U-Boot.
A new qcom_defconfig is added, with the aim of providing a generic
U-Boot configuration that will work on as many Qualcomm boards as
possible. It replaces the defconfig files for the Dragonboard 845c,
Galaxy S9, and QCS404 EVB. For now the db410c and 820c are excluded as
they still have some board code left.
Similarly, the config headers for db845c, starqltechn, and qcs404-evb
are replaced by a single qcom header.
The previously db410c-specific board_usb_init() function is made to be
generic and is added to mach-snapdragon. While we lack proper modelling
for USB configuration, using a well-known named pinctrl state is a
reasonably generic middleground, and works using upstream DT. This
function will do nothing unless the USB node has a pinctrl state named
"device", in which case it will be set when entering USB peripheral
mode.
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Tested-by: Sumit Garg <[email protected]> #qcs404
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Use the root compatible strings from upstream Linux, add missing
'#clock-cells' property to the gcc node.
Adjust some of the msm8916/apq8016 drivers to use the correct upstream
compatible properties and DT bindings.
This prepares us to switch to upstream DT in a future patch.
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Tested-by: Sumit Garg <[email protected]> #qcs404
Signed-off-by: Caleb Connolly <[email protected]>
|
|
When booting U-Boot on board with a locked down first-stage bootloader,
we emulate the Linux boot header. By passing the U-Boot FDT through this
first-stage bootloader and retrieving it afterwards we can pre-populate
the memory nodes and other info like the KASLR address.
Add a function to export the FDT addr so that boards can use it over the
built-in FDT.
Don't check is_addr_accessible() here because we might not yet have a
valid mem_map if it's going to be populated from the FDT, let the board
do their own validation instead.
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Tested-by: Sumit Garg <[email protected]> #qcs404
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Raymond Mao <[email protected]> says:
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Handoff spec v0.9.
If an arch wishes to have different behaviors for loading bloblist
from the previous boot stage, it is required to implement the custom
function xferlist_from_boot_arg().
|
|
During bloblist initialization, load the bloblist via boot arguments
from the previous loader.
If a valid bloblist exists in boot arguments, relocate it into the
fixed bloblist memory region.
If not, fallback to support BLOBLIST_ADDR or BLOBLIST_ALLOC.
Signed-off-by: Raymond Mao <[email protected]>
|
|
The current bloblist pointer and size can be retrieved from global
data, so we don't need to pass them from the function arguments.
This change also help to remove all external access of gd->bloblist
outside of bloblist module.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Instead of expecting the bloblist total size to be the same as the
pre-allocated buffer size, practically we are more interested in
whether the pre-allocated buffer size is bigger than the bloblist
total size.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add bloblist_check_reg_conv() to check whether the bloblist is compliant
to the register conventions defined in Firmware Handoff specification.
This API can be used for all Arm platforms.
Signed-off-by: Raymond Mao <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-2024-02-28
* set IMAGE_DLLCHARACTERISTICS_NX_COMPAT in EFI binaries
* provide SBI based runtime system reset
* page align EFI binary section on ARMv7
* separate .data and .text sections of EFI binaries on ARMv7
|
|
The IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag marks an EFI binary where
the following conditions are met [1]:
* Executable and writable sections are separated.
* The application does not run self-modifying code.
* The application uses the EFI_MEMORY_ATTRIBUTE_PROTOCOL when loading
executable code.
* The application does not assume that all memory ranges are usable.
* The stack is not expected to be executable.
The only EFI binaries U-Boot provides that do not fulfill these
requirements are the EFI app and the EFI payload.
Once we have implemented separation of writable and executable memory in
U-Boot we can use the IMAGE_DLLCHARACTERISTICS_NX_COMPAT flag to decide
if we will load an EFI binary.
[1] New UEFI CA memory mitigation requirements for signing
https://techcommunity.microsoft.com/t5/hardware-dev-center/new-uefi-ca-memory-mitigation-requirements-for-signing/ba-p/3608714
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the hc2910-2aghd05 platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the slimbootloader platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the qemu-x86* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the minnowmax platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the galileo platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the efi-x86_payload* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the efi-x86_app* platforms and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the edison platform and remove
the otherwise empty file.
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the crownbay platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the cougarcanyon2 platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the cherryhill platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the bayleybay platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the coreboot platform and remove
the otherwise empty file.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the xilinx_mbv platforms and remove
the otherwise empty file.
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Enable binman in Kconfig and device tree for imxrt* as it is used to
prepend fspi_header.bin to SPL and u-boot.img.
Signed-off-by: Jesse Taube <[email protected]>
|
|
Nishanth Menon <[email protected]> says:
This is a wide cleanup to switch to setting fdtfile using env_set
instead of scripted magic. 'fdtfile' is expected to be set by default.
This allows the stdboot triggered efi loaders to find the correct OS
device tree file even if regular boot process is interrupted by user
intervention.
|
|
We shouldn't need finfdt anymore. Drop the env script.
Reviewed-by: Jonathan Humphreys <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
|
|
|
|
The Sielaff i.MX6 Solo board is a control and HMI board for vending
machines. Add support for this board.
The devicetree files are taken from pending changes in the Linux
kernel that are available from linux-next and will likely be
part of Linux v6.9.
Signed-off-by: Frieder Schrempf <[email protected]>
|
|
The conversion to DM_SERIAL is mandatory, so do the conversion.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Ian Ray <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20240215
- Fix avb_verify command with SD cards
- Add u-boot-dfu maintainer tree for AB/AVB
- Avb: report verified boot state based on lock state
- Misc avb refactors improve code quality
|
|
Introduce str_avb_io_error() and str_avb_slot_error() functions,
that provide a pointer to AVB runtime error message.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
[1] https://www.kernel.org/doc/Documentation/process/license-rules.rst
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2024.04-rc3
zynqmp:
- Cover missing _SE chip variants to fix fpga programming
versal:
- Enable LTO for mini configurations
versal-net:
- Enable LTO for mini configurations
- Fix GIC address to aligned with real silicon
xilinx:
- DTs cleanup and fixups
- Enable HTTP boot
- Add missing spl header to zynqmp.c
|
|
Previous addresses where used in past in emulation environment but never
gets to silicon that's why use correct addresses.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/5d3d0e1afb1f673ffeb4a1c5d7f040475c806a30.1707220293.git.michal.simek@amd.com
|
|
With the relatively new button API in U-Boot, it's now much easier to
model the common usecase of mapping arbitrary actions to different
buttons during boot - for example entering fastboot mode, setting some
additional kernel cmdline arguments, or booting with a custom recovery
ramdisk, to name a few.
Historically, this functionality has been implemented in board code,
making it fixed for a given U-Boot binary and requiring the code be
duplicated and modified for every board.
Implement a generic abstraction to run an arbitrary command during boot
when a specific button is pressed. The button -> command mapping is
configured via environment variables with the following format:
button_cmd_N_name=<button label>
button_cmd_N=<command to run>
Where N is the mapping number starting from 0. For example:
button_cmd_0_name=vol_down
button_cmd_0=fastboot usb 0
This will cause the device to enter fastboot mode if volume down is held
during boot.
After we enter the cli loop the button commands are no longer valid,
this allows the buttons to additionally be used for navigating a boot
menu.
Tested-by: Svyatoslav Ryhel <[email protected]> # Tegra30
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Clarify usage of buffer argument.
Signed-off-by: Janne Grunau <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add board code for the Renesas R8A779H0 V4M Gray Hawk board.
Signed-off-by: Hai Pham <[email protected]>
|
|
Add power domain indices for R-Car V4M (R8A779H0).
The current version is imported from:
https://lore.kernel.org/linux-renesas-soc/c5cbef71178cada761e9da7bcbb6f21334f93ef8.1706194617.git.geert+renesas@glider.be/
Signed-off-by: Duy Nguyen <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
|
|
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V4M (R8A779H0) SoC.
The current version is imported from:
https://lore.kernel.org/linux-renesas-soc/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be/
Signed-off-by: Duy Nguyen <[email protected]>
Signed-off-by: Hai Pham <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
- Add USB support for phycore-imx8mp
- Fix environment corruption, reset on mx6sabresd
- Print reset cause on imx8
- Extend mkimage to support generating an image for i.MXRT FlexSPI
- Add new apalis and colibri variants
- Add support for phyBOARD-Segin-i.MX93 support
- Fix when FEC is primarily used instead of EQOS on i.MX93.
|
|
add support for Serial Downloader Boot via UUU as well as flashing emmc
via UUU on USB0 Port of phyBOARD Pollux.
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Benjamin Hahn <[email protected]>
|
|
Add implementation of sc_pm_reset_reason() call for obtaining
reset reason.
Signed-off-by: Igor Opaniuk <[email protected]>
|
|
Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on
the PHYTEC phyCORE-i.MX93 SoM.
Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- FEC Ethernet
- debug UART
- watchdog
Signed-off-by: Mathieu Othacehe <[email protected]>
Tested-by: Primoz Fiser <[email protected]>
Reviewed-by: Yannic Moog <[email protected]>
|
|
Modify imx8m Flex SPI Configuration Block to work with imxrt.
Add more Flex SPI configuration options to Kconfig.
Signed-off-by: Jesse Taube <[email protected]>
Tested-by: Adam Ford <[email protected]> #imx8mn-beacon
|
|
Use a local definition for the PHY features. PHY_100BT1_FEATURES are
not defined using the 100BaseT1 bit, so keep this workaround in the driver.
Signed-off-by: "Radu Pirea (NXP OSS)" <[email protected]>
|
