| Age | Commit message (Collapse) | Author |
|---|
|
All call sites are using size rather than end addresses,
so instead - as previously done - calculating an end address
everywhere, just modify the function to use size and internally
calculate the end address
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Patrick Wildt <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
After increase boot and recovery partition userdata was not resize.
so on VIM3 16GB and VIM3L `fastboot oem format` or `gpt write mmc 2
$partitions` fail because end of last partition is outside of eMMC
size.
Remove 64MB on userdata partitions to fix it.
Fixes: ce138d9742bf ("configs: khadas-vim3{l}: Increase boot/recovery partition size")
Signed-off-by: Guillaume La Roque <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Record the last active menu item and check if it equals to the
current selected item before reprint.
Signed-off-by: Weijie Gao <[email protected]>
Reviewed-by: Daniel Golle <[email protected]>
Tested-by: Daniel Golle <[email protected]>
|
|
This patch adds a new callback named need_reprint for menu.
The need_reprint will be called before printing the menu. If the
callback exists and returns FALSE, menu printing will be canceled.
This is very useful if the menu was not changed. It can save time
for serial-based menu to handle more input data.
Signed-off-by: Weijie Gao <[email protected]>
Reviewed-by: Daniel Golle <[email protected]>
Tested-by: Daniel Golle <[email protected]>
|
|
Leo Yan <[email protected]> says:
This patch series is to refine the booting on Arm Total Compuate
platform.
It changes to use the info passed in DTB for initialization DRAM info,
and dynamically initializes the booting envoironment variables.
Another big change is to use an envoironment file for boot commands,
based on it, the series extends to support multiple block devices
(MMC and virtio). And the env file is extended for booting Debian.
The last commit is to update memory mapping info based on the DRAM info
passed via DT binding.
Link: https://lore.kernel.org/r/[email protected]
|
|
The boot command for Total Compute has many aspects and changes from time
to time. So move it to an .env file where it can be a proper script.
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
The whole DRAM bank is used for loading and U-boot can detect the
overlap between the kernel and initramfs. So it is safe to drop
bootm_size.
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
Initialize the environment variables 'fdt_addr_r' and 'kernel_addr_r'
during the misc init phase. The static configurations are not needed,
remove them.
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
On Total Compute, TF-A passes the info via DT binding for the hardware
description - includes the serial, memory, and arm_ffa nodes.
This commit initializes the fdt base address based on the passed the
register x1.
The similar implementation has already been done for the raspberry pi,
so borrow a lot of it.
Co-developed-by: Jackson Cooper-Driver <[email protected]>
Signed-off-by: Jackson Cooper-Driver <[email protected]>
Signed-off-by: Boyan Karatotev <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
|
|
Tests which create a new bloblist overwrite the existing one in sandbox.
Provide a flag for tests to declare this behaviour. Save and restore the
bloblist pointer so that other tests remain unaffected.
Note that when sandbox is running normally, the bloblist has been
relocated to high in memory. The existing bloblist tests create a new
bloblist low in memory, so they do not conflict.
Correct a build error on coreboot by using accessors for gd->bloblist:
Signed-off-by: Simon Glass <[email protected]>
|
|
In some core test code, no existing categories make sense. Add a new one
for testing.
Signed-off-by: Simon Glass <[email protected]>
|
|
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <[email protected]>
|
|
All the uclass functions for finding a device end up creating a uclass
if it doesn't exist. Add a function which instead returns NULL in this
case.
This is useful when in the 'unbind' path, since we don't want to undo
any unbinding which has already happened.
Signed-off-by: Simon Glass <[email protected]>
|
|
Unlike linked lists, it is inefficient to remove items from an alist,
particularly if it is large. If most items need to be removed, then the
time-complexity approaches O(n2).
Provide a way to do this efficiently, by working through the alist once
and copying elements down.
Signed-off-by: Simon Glass <[email protected]>
|
|
Sometimes it is useful to empty the list without de-allocating any of
the memory used, e.g. when the list will be re-populated immediately
afterwards.
Add a new function for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add some macros which permit easy iteration through an alist, similar to
those provided by the 'list' implementation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new function which returns the next element after the one
provided, if it exists in the list.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a better description for this macro.
Signed-off-by: Simon Glass <[email protected]>
|
|
Comment this macro so that it is clear how to use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the function comment to note that this function can return NULL
if it runs out of memory.
Signed-off-by: Simon Glass <[email protected]>
|
|
All the uclass functions for finding a device end up creating a uclass
if it doesn't exist. Add a function which instead returns NULL in this
case.
This is useful when in the 'unbind' path, since we don't want to undo
any unbinding which has already happened.
Signed-off-by: Simon Glass <[email protected]>
|
|
Unlike linked lists, it is inefficient to remove items from an alist,
particularly if it is large. If most items need to be removed, then the
time-complexity approaches O(n2).
Provide a way to do this efficiently, by working through the alist once
and copying elements down.
Signed-off-by: Simon Glass <[email protected]>
|
|
Sometimes it is useful to empty the list without de-allocating any of
the memory used, e.g. when the list will be re-populated immediately
afterwards.
Add a new function for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add some macros which permit easy iteration through an alist, similar to
those provided by the 'list' implementation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new function which returns the next element after the one
provided, if it exists in the list.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a better description for this macro.
Signed-off-by: Simon Glass <[email protected]>
|
|
Comment this macro so that it is clear how to use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the function comment to note that this function can return NULL
if it runs out of memory.
Signed-off-by: Simon Glass <[email protected]>
|
|
Heinrich Schuchardt <[email protected]> says:
With this series opendir, readdir, closedir are implemented for ext4.
These functions are needed for the UEFI sub-system to interact with
the ext4 file system.
To reduce code growth the functions are reused to implement the ls
command for ext4.
A memory leak in ext4fs_exists is resolved.
ext4fs_iterate_dir is simplified by removing a redundant pointer copy.
Link: https://lore.kernel.org/r/[email protected]
|
|
For accessing directories from the EFI sub-system a file system must
implement opendir, readdir, closedir. Provide the missing implementation.
With this patch the eficonfig command can be used to define load options
for the ext4 file system.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
test"
Tom Rini <[email protected]> says:
In the patch series "spi-nor: Add parallel and stacked memories support"
a number of issues have since been raised about problems that now exist
on a large number of previously working platforms. Marek Vasut has gone
and identified a number of issues and this series is the starting point
of attempting to address them and fix the problems with previously
existing platforms.
Link: https://patchwork.ozlabs.org/project/uboot/list/?series=429932&state=*
Link: https://lore.kernel.org/r/[email protected]
|
|
The SPI_ADVANCE description does not explain what the switch does.
It does not have anything to do with any advanced functionality, it
only gates off support for stacked and parallel SPI NORs. Rename the
Kconfig symbol, update description, and move it right next to Xilinx
hardware as it seems to be specific to this hardware. Make sure the
symbol is also protected by if DM_SPI in Kconfig.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <[email protected]>
|
|
Provide Sphinx style documentation for struct ext2_inode.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
* Describe the fields of struct fs_dir_stream.
* Update fs_readdir() and fs_opendir() description.
* Fix Sphinx errors.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23092
- Implement i.MX93 erratum fix on the dwc_eth_qos driver to fix RMII.
- Add support for Emcraft Systems NavQ+.
- Fix the size of IVT + CSF blob tacked on to u-boot.itb.
|
|
lmb_alloc_flags() & lmb_alloc_base_flags() are just a wrappers for
_lmb_alloc_base(). Since the only difference is the max address of the
allowed allocation which _lmb_alloc_base() already supports with the
LMB_ALLOC_ANYWHERE flag, remove one of them.
Keep the lmb_alloc_base_flags() which also prints an error on failures
and adjust efi_allocate_pages() to only use one of them.
While at it clean up the duplicate function description from the header
file.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Due to the removal of weak functions in 7d6cee2cd0 ("cmd: cache: Remove
weak function"), U-Boot fails to compile after updating to v2024.10 for
mediatek target in OpenWrt with GCC-14 with error:
cmd/cache.c: In function 'do_dcache':
cmd/cache.c:57:25: error: implicit declaration of function
'noncached_set_region' [-Wimplicit-function-declaration]
Thus, provide a prototype in include/cpu_func.h to fix a build
error in cmd/cache.c, since related prototypes are also located there.
The issue occurred after the update of uboot-mediatek in OpenWrt to
v2024.10, in combination with GCC-14 toolchain. It was reported and
discussed in https://github.com/openwrt/openwrt/issues/16697, and
temporarily fixed with
https://github.com/openwrt/openwrt/commit/92ca322dd1f48158b8829fec59319a12e4ae4295.
Signed-off-by: Jonas Jelonek <[email protected]>
Link: https://github.com/openwrt/openwrt/issues/16697
Link: https://github.com/openwrt/openwrt/commit/92ca322dd1f48158b8829fec59319a12e4ae4295
Fixes: 7d6cee2cd0 ("cmd: cache: Remove weak function")
Signed-off-by: Tom Rini <[email protected]>
|
|
consistency
Currently, a number of generic cache related functions have their common
prototype declared in include/cpu_func.h. Move the current set of
noncached functions there as well to match.
Signed-off-by: Tom Rini <[email protected]>
|
|
The Emcraft Systems NavQ+ kit is a mobile robotics platform
based on NXP i.MX8 MPlus SoC.
The following interfaces and devices are enabled:
- eMMC
- Gigabit Ethernet (through eQOS interface)
- SD-Card
- UART console
The device tree file is taken from upstream Linux Kernel
through OF_UPSTREAM
Signed-off-by: Gilles Talis <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
|
|
fixes & cleanups"
Jan Kiszka <[email protected]> says:
This adds support for the new IOT2050 SM variant, introduces a sysinfo
driver which also permits SMBIOS support and switches the board to
OF_UPSTREAM. There are some further fixes for the boards included as well.
Not yet included is configuration support for DMA isolation via the PVU as
this depends on not yet merged DT bindings and another overlay.
[trini: This is just the first 10 patches in the series for now]
Link: https://lore.kernel.org/r/[email protected]
|
|
Due to new DDR size introduction, the current logic of determining the
DDR size is not able to get the correct size.
Instead, the DDR size is determined by the FSBL(SEBOOT) then passed to
u-boot through the scratchpad info.
The SEBoot version must be >= D/V01.04.01.02 to support this change.
Also now for some variants, the DDR size may > 2GB, so borrow some code
from the TI evm to iot2050 to support more than 2GB DDR.
Signed-off-by: Baocheng Su <[email protected]>
Signed-off-by: Jan Kiszka <[email protected]>
|
|
This prevented to set m2_manual_config - as evaluated by
m2_connector_setup - under strict configurations for secure boot.
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/power .
Remove unused legacy DT header files from include/dt-bindings/power .
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Renesas R-Car systems use mainline Linux DTs for U-Boot via OF_UPSTREAM,
which also includes headers from dts/upstream/include/dt-bindings/clock .
Remove unused legacy DT header files from include/dt-bindings/clock .
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
|
|
QEMU supports NVMe devices, but U-Boot only tries to boot from Virtio.
This is problematic when explicitly using NVMe, so fix that.
Additionally, RVVM virtual machine is almost fully compatible with QEMU,
except it only implements NVMe drives instead of VirtIO.
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Patrick Rudolph <[email protected]> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/[email protected]
|
|
On Arm platforms that use ACPI they cannot rely on the "spin-table"
CPU bringup usually defined in the FDT. Thus implement the
'ACPI Multi-processor Startup for ARM Platforms', also referred to as
'ACPI parking protocol'.
The ACPI parking protocol works similar to the spin-table mechanism, but
the specification also covers lots of shortcomings of the spin-table
implementations.
Every CPU defined in the ACPI MADT table has it's own 4K page where the
spinloop code and the OS mailbox resides. When selected the U-Boot board
code must make sure that the secondary CPUs enter u-boot after relocation
as well, so that they can enter the spinloop code residing in the ACPI
parking protocol pages.
The OS will then write to the mailbox and generate an IPI to release the
CPUs from the spinloop code.
For now it's only implemented on ARMv8, but can easily be extended to
other platforms, like ARMv7.
TEST: Boots all CPUs on qemu-system-aarch64 -machine raspi4b
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Add support for Arm sbsa [1] v0.3+ that is supported by QEMU [2].
Unlike other Arm based platforms the machine only provides a minimal
FDT that contains number of CPUs, ammount of memory and machine-version.
The boot firmware has to provide ACPI tables to the OS.
Due to this design a full DTB is added here as well that allows U-Boot's
driver to properly function. The DTB is appended at the end of the U-Boot
image and will be merged with the QEMU provided DTB.
In addition provide documentation how to use, enable binman to fabricate both
ROMs that are required to boot and add ACPI tables to make it full compatible
to the EDK2 reference implementation.
The board was tested using Fedora 40 Aarch64 Workstation. It's able
to boot from USB and AHCI or network.
Tested and found working:
- serial
- PCI
- xHCI
- Bochs display
- AHCI
- network using e1000e
- CPU init
- Booting Fedora 40
1: Server Base System Architecture (SBSA)
2: https://www.qemu.org/docs/master/system/arm/sbsa.html
Signed-off-by: Patrick Rudolph <[email protected]>
Cc: Peter Robinson <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Support reading the "interrupts" property from the devicetree in case
the "interrupts-extended" property isn't found. As the "interrupts"
property is commonly used, this allows to parse all existing FDT and
makes irq_get_by_index() more useful.
The "interrupts" property doesn't contain a phandle as "interrupts-extended"
does, so implement a new method to locate the interrupt-parent called
irq_get_interrupt_parent().
TEST: Read the interrupts from the GIC node for ACPI MADT generation.
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
|
