| Age | Commit message (Collapse) | Author |
|---|
|
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
In preparation to support multiple EFI net objects, support
constructing device paths using an ethernet device different
than the default. Add a udevice argument to the device path
generation, and keep the callsites with eth_get_dev() to
preserve existing functionality.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
This gets called each time a payload is to get executed by bootefi.
For now this only updates the PXE IP address.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
The following symbols are exposed:
- efi_reinstall_protocol_interface
This is done so that the device path protocol interface
of the network device can be changed internally by u-boot
when a new bootfile gets downloaded.
- eth_set_dev
To support multiple network udevices
- efi_close_event
This comes in preparation to support unregistering
an EFI network device from the EFI network stack when
the underlying U-boot device gets removed
- efi_[dis]connect_controller
The EFI network driver uses ConnectController to add a
NIC to the EFI network stack.
- efi_uninstall_protocol_interface
connect_controler for the efi network driver can install
protocols, which need to be uninstalled in disconnect_controller
- EFI_SIMPLE_NETWORK_PROTOCOL_GUID
Signed-off-by: Adriano Cordova <[email protected]>
|
|
Hide video bridge functions behind config condition and add inline
fallbacks to avoid erroring out when using header without config
enabled.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add get_display_timing ops for internal bridges linked to
panels that do not support EDID (MIPI-DSI panels for example)
or have EDID not routed.
Tested-by: Dang Huynh <[email protected]> (PineTab 2)
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add a mostly complete list of ofnode analogs of of_graph
parsing helpers.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The existing memory layout places the bloblist at 0xb000 and the fdt at
0x100, resulting in a 0xaf00 size constraint for the fdt. This constraint
has been reached. Lets modify the layout by moving the bloblist to 0x100,
device tree to 0x1000 and placing early memory allocation after pre-console
buffer at 0xf4000. This should guarantee sufficient memory allocation for
future expansion.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
EFI_FILE_PROTOCOL.SetInfo()."
Gabriel Dalimonte <[email protected]> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/[email protected]
|
|
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <[email protected]>
|
|
The selection for *rename as the name for the rename/move operation
derives from the POSIX specification where they name the function
rename/renameat. [1] This aligns with Linux where the syscalls for
renaming/moving also use the rename/renameat naming.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
The GPL-2.1+ SPDX License Identifier doesn't exist, but luckily the full
license text was available which shows that GPL-2.1+ was a typo and it
should have been LGPL-2.1-or-later.
As the '+' in LGPL-2.1+ is deprecated in SPDX 3.0, use the preferred
identifier, which is '-or-later'.
Normally the full license header is removed when switching to SPDX
License Identifiers, so do that now.
Signed-off-by: Diederik de Haas <[email protected]>
|
|
When enabling net console and console multiplexing, a boot crash was
observed using mtk_eth driver with stdin/stdout set to "serial,nc"
in persistent environment:
> CPU: MediaTek MT7981
> Model: OpenWrt One
> DRAM: 1 GiB
> Core: 35 devices, 15 uclasses, devicetree: separate
> spi-nand: spi_nand spi_nand@0: Winbond SPI NAND was found.
> spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
> Loading Environment from UBI... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> mtd: partition "ubi" extends beyond the end of device "spi-nand0" -- size truncated to 0x7f00000
> Read 126976 bytes from volume ubootenv to 000000007f7bf0c0
> Read 126976 bytes from volume ubootenv2 to 000000007f7de100
> OK
> "Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeea000018
> elr: 0000000041e63cd4 lr : 0000000041e1b844 (reloc)
> elr: 000000007ff9ecd4 lr : 000000007ff56844
> x0 : eafffffeea000018 x1 : 000000007fb552e0
> x2 : 00000000000000fe x3 : 0000000000000000
The cause is that "serial,nc" forced the console subsystem to
initialize the ethernet driver before ethernet subsystem
initialization (console_init_r() is called before initr_net()).
During the mtk_eth driver initialization, mdio_register() will be
called, and miiphy_get_dev_by_name() will then be called.
The miiphy_get_dev_by_name() will check the list "mii_devs" to see
if the passed device name exists. However the mii_devs is defined
without initialization:
> static struct list_head mii_devs;
and the actual initialization is done in the following chain:
initr_net -> eth_initialize -> eth_common_init -> miiphy_init
Since initr_net() hasn't be called, iterating over the mii_devs
will access to physical address 0 (mii_devs.next == NULL) and will
cause the crash.
The fix is to define mii_devs using:
> static LIST_HEAD(mii_devs);
As the "current_mii" is defined as a static variable, it will
always be NULL in board_r stage and initializing it will NULL is
unnecessary. So the entire miiphy_init() can be remove.
Signed-off-by: Weijie Gao <[email protected]>
|
|
builds"
Paul HENRYS <[email protected]> says:
This serie of patches adds a new tool to authenticate files signed with
a preload header. This tool is also used in the tests to actually
verify the authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/[email protected]
|
|
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
fixes & cleanups"
Baocheng Su <[email protected]> says:
This introduces a sysinfo driver which also permits SMBIOS support.
The first 10 patches of v2 have already been applied. The remaining is
solely the sysinfo driver. To maintain consistency and ease of searching
through the history, the series title remains unchanged.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new field SYSID_BOARD_RAM_SIZE_MB to sysinfo structure to store
the size of RAM in MB. dram_init can use this field to get the RAM size
via sysinfo driver.
Signed-off-by: Baocheng Su <[email protected]>
|
|
This commit introduces a new API to the sysinfo module, allowing access
to data elements. This is particularly useful for handling data with
multiple instances, such as MAC addresses.
Signed-off-by: Baocheng Su <[email protected]>
|
|
Allow for the sysinfo drivers to provide a system UUID to SMBIOS. Will
be first used by the IOT2050 boards.
Signed-off-by: Li Hua Qian <[email protected]>
Signed-off-by: Jan Kiszka <[email protected]>
Signed-off-by: Baocheng Su <[email protected]>
|
|
U-Boot requires to access x509_internal.h, mbedtls_sha256_context and
mbedtls_sha1_context in the porting layer, and this requires to
enable MBEDTLS_ALLOW_PRIVATE_ACCESS.
Enable it to mscode and pkcs7_parser to fix a mbedtls internal building
error when X509 is selected.
Moreover, Move it to a separate file to avoid enabling it in multiple
places.
Signed-off-by: Raymond Mao <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Neither bb_miiphy_buses nor bb_miiphy_buses_num are used anymore.
Drop both of them.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
The struct bb_miiphy_bus embeds struct struct mii_dev, which
already contains one copy of name field. Drop the duplicate
top level copy of name field.
The a38x code does static assignment of disparate names, use
snprintf(...) to fill in matching name in probe to avoid any
breakage.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Introduce bb_miiphy_alloc()/bb_miiphy_free() wrappers to allocate and free
struct bb_miiphy_bus. Make struct bb_miiphy_bus wrap struct mii_dev, which
will become useful later in bb_miiphy_bus accessors, which would be able
to access struct bb_miiphy_bus using container_of, even if the PHY stack
only passes in the inner struct mii_dev .
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Introduce mdio_init() split off from mdio_alloc(), which is used
to initialize already allocated struct mii_dev.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
The .init callback is not called by any function, drop it.
There are no more users of the init callback, drop the entire
mechanism.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/24816
Please pull the SoCFPGA changes for next from u-boot-socfpga, containing
boot support for the Altera SoCFPGA Agilex 5 platform in U-Boot. The
changes include:
1. Board-specific configurations and setup required to enable Agilex 5
operation in U-Boot.
2. Integration of cache coherency unit (CCU) initialization routine,
including CCU conguration in DT.
3. Clock, firewall (configured in DT), SMMU, low level initialization
specific to Agilex 5.
4. Integration of memory initialization routine, including DDR setup.
This patch set has been tested on Agilex 5 devkit with QSPI boot
(UBI/UBIFS) and RAM boot (TFTP & ARM DS debugger).
|
|
Add the required configuration in the U-Boot env to enable Linux QSPI
boot with UBI / UBIFS.
Signed-off-by: Alif Zakuan Yuslaimi <[email protected]>
Signed-off-by: Tien Fong Chee <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
Prepare v2025.04-rc3
|
|
This reverts commit c8750efe02c20725388dd4279896aaf306acfad4, reversing
changes made to 8c6cf8aeea7e57ca686de8b765e4baf3a7ef1fa7.
Unfortunately these changes do not build on macOS hosts.
Signed-off-by: Tom Rini <[email protected]>
|
|
Branch contains bringup of Acer Iconia Tab A500 (codename picasso), a
Tegra 2 Android device with decent Linux kernel support. Ondevice tests
and U-Boot test suit all passed.
|
|
Paul HENRYS <[email protected]> says:
This serie of patches adds a new tool to authenticate files signed
with a preload header.
This tool is also used in the tests to actually verify the
authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/[email protected]
|
|
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
As AM57x uses overlays for display and camera interfaces, add support to
load DT overlay files to MMC boot.
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Anurag Dutta <[email protected]>
|
|
TI AM57x boards use a custom (though family common to TI boards) mechanism
for booting Linux. Add support to enable custom MMC boot as a default
option along with the distroboot approach.
Also, add supporting mmc boot environment variables which shall be used for
custom MMC boot
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Anurag Dutta <[email protected]>
|
|
Kernel commit 837833a724b7 ("environment: ti: Add get_fit_config command
to get FIT config string") introduced "get_fit_config" in ti_armv7_common.h
to mangle the fdtfile name when used to select a config node from the OE
made FIT image. However, the ti_armv7_common.h is common for both K3 and
AM57xx platforms. AM57xx platforms' fdtfile name does not have '/' and
"conf-" prefix so the setexpr command fails and boot hangs.
Override the get_fit_config in AM57x specific config header to get the
correct FIT config name.
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Anurag Dutta <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/24709
UEFI:
* create a parent device for all EFI block devices
* move lmb_map_update_notify() to EFI
* make efi_add_memory_map_pg() static
* remove comparisons to string literals from runtime
* ix potential deref-after-null
Other:
* avoid superfluous value check in lmb_map_update_notify()
* support more efi protocols in uuid_guid_get_str()
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/24692
- board: VisionFive 2: Update maintainer file
- configs: starfive: Add LwIP network and wget command
- configs: microchip: set DEFAULT_FDT_FILE
|
|
The function is only used in the efi_memory.c module.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
When building with qemu_arm64_defconfig with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
and CONFIG_EFI_LOADER=n an error undefined reference to efi_add_memory_map_pg
occurs.
Move the EFI dependent part of lmb_map_update_notify() to the EFI
sub-system.
Reported-by: Liya Huang <[email protected]>
Acked-by: Liya Huang <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Instead of testing the value of parameter op at runtime use an enum to
ensure that only valid values are used.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Variable $fdtfile needs to be set for automatically loading a device-tree
from the ESP or boot partition.
* Set CONFIG_DEFAULT_FDT_FILE in the defconfig.
* Add $fdtfile to the default environment.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Tom Rini <[email protected]> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/[email protected]
|
|
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Refactor the xferlist to remove the relocating when bloblist passed
from the boot args.
Refactor bloblist init to use incoming standard passage by default
if a valid transfer list exists in the boot args.
For bloblist relocation, use the actual total size if it has a smaller
BLOBLIST_SIZE_RELOC.
Signed-off-by: Raymond Mao <[email protected]>
Suggested-by: Ilias Apalodimas <[email protected]>
|
|
clock/rk3288-cru.h in include/dt-bindings is almost identical to the
version in dts/upstream, remove the copy from include/dt-bindings to
only use the version from dts/upstream.
One clk, SCLK_MAC_PLL, is not part of the upstream bindings, this clk is
not used by upstream, in-tree or vendor DTs and can safely be dropped.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The device tree for rk3036 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3036 boards.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
|
|
As per TRM[0] Section 8.7.1 "TPS6594-Q1 Registers", LDOx_Vout
bit 6-1, define the NVM voltage settings.
Along side table 8-4 of above TRM, shows voltage to value mapping.
Driver wrongly using bits 5-1 to calculate voltage, and to convert
voltage to value driver was using buck's calculation.
So fix those calculation.
[0]: https://www.ti.com/lit/ds/symlink/tps6594-q1.pdf
Fixes: 5d7dbd22cf7d ("power: regulator: tps65941: use function callbacks for conversion ops")
Signed-off-by: Udit Kumar <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for starting TFA from U-Boot running in EL3 as part of
fitImage boot, so the user can start U-Boot in the highest privilege
level on the platform, bundle TFA, Linux, DT into a single fitImage
and boot such a bundle as a whole.
There are two main benefits of this approach. First is the ability
to run U-Boot in EL3, where it has unrestricted access to the entire
system and can act as a useful debug tool, as it was always intended
to be used. Second is the ability to easily and safely update of any
component in the fitImage, be it TFA, Linux or DT.
The boot process is similar to regular Linux with DT fitImage boot
process, except the TFA has to be bundled into the fitImage. For the
bundling instructions, see below. The TFA is started as a 'loadables'
with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep()
handling implemented in board code, and performing the handoff and
boot in case the TFA was loaded.
The loadables handler is optional and meant to set up any sort of
handoff structures used by the TFA BL31 or perform any other setup
that is needed by the blob. The custom armv8_switch_to_el2_prep()
has to implement the jump to TFA BL31 with return to U-Boot just
before booting the Linux kernel.
Example fitImage image and configuration section:
/dts-v1/;
/ {
description = "Linux kernel with FDT blob and TFA BL31";
images {
kernel-1 { ... };
fdt-1 { ... };
atf-1 { /* This is the TFA BL31 image */
description = "TFA BL31";
data = /incbin/("../build/plat/release/bl31.bin");
type = "tfa-bl31";
arch = "arm64";
os = "arm-trusted-firmware";
compression = "none";
load = <0x46400000>;
entry = <0x46400000>;
};
};
configurations {
default = "conf-1";
conf-1 {
description = "Boot Linux";
kernel = "kernel-1";
fdt = "fdt-1";
loadables = "atf-1"; /* This is the TFA BL31 loadable */
};
};
};
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add CONFIG_BOOTCOUNT_ALTBOOTCMD so the developer is able to add
custom altbootcmd via Kconfig when they enable BOOTCOUNT. With this now
in Kconfig, we need to move it from environment files / config.h files
and in to the defconfig file.
This was done by generating u-boot-initial-env for all platforms before
the Kconfig change, to extract altbootcmd values and then again after to
compare the result.
[trini: Perform migration to defconfigs, reword commit message]
Signed-off-by: Tom Rini <[email protected]>
|
